Fix typo in various Kconfig file

Correct spelling typo in various Kconfig file.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Masanari Iida 2012-04-14 00:14:11 +09:00 committed by Jiri Kosina
parent b40b26ccfc
commit 6b2aac42b2
15 changed files with 19 additions and 19 deletions

View File

@ -7,7 +7,7 @@ choice
help
The Freescale (was Motorola) M68K family of processors implements
the full 68000 processor instruction set.
The Freescale ColdFire family of processors is a modern derivitive
The Freescale ColdFire family of processors is a modern derivative
of the 68000 processor family. They are mainly targeted at embedded
applications, and are all System-On-Chip (SOC) devices, as opposed
to stand alone CPUs. They implement a subset of the original 68000

View File

@ -1001,12 +1001,12 @@ config HOLES_IN_ZONE
bool
#
# Endianess selection. Sufficiently obscure so many users don't know what to
# Endianness selection. Sufficiently obscure so many users don't know what to
# answer,so we try hard to limit the available choices. Also the use of a
# choice statement should be more obvious to the user.
#
choice
prompt "Endianess selection"
prompt "Endianness selection"
help
Some MIPS machines can be configured for either little or big endian
byte order. These modes require different kernels and a different

View File

@ -57,7 +57,7 @@ config CMDLINE
options.
config CMDLINE_OVERRIDE
bool "Built-in command line overrides firware arguments"
bool "Built-in command line overrides firmware arguments"
default n
depends on CMDLINE_BOOL
help

View File

@ -141,7 +141,7 @@ config DEBUG_STACKOVERFLOW
bool "Check for kernel stack overflow"
default y
help
Make extra checks for space avaliable on stack in some
Make extra checks for space available on stack in some
critical functions. This will cause kernel to run a bit slower,
but will catch most of kernel stack overruns and exit gracefuly.

View File

@ -258,7 +258,7 @@ config PPC_ICSWX_PID
default y
---help---
The PID register in server is used explicitly for ICSWX. In
embedded systems PID managment is done by the system.
embedded systems PID management is done by the system.
config PPC_ICSWX_USE_SIGILL
bool "Should a bad CT cause a SIGILL?"
@ -266,7 +266,7 @@ config PPC_ICSWX_USE_SIGILL
default n
---help---
Should a bad CT used for "non-record form ICSWX" cause an
illegal intruction signal or should it be silent as
illegal instruction signal or should it be silent as
architected.
If in doubt, say N here.

View File

@ -67,7 +67,7 @@ config IO_EVENT_IRQ
This option will only enable the IO event platform code. You
will still need to enable or compile the actual drivers
that use this infrastruture to handle IO event interrupts.
that use this infrastructure to handle IO event interrupts.
Say Y if you are unsure.

View File

@ -1,7 +1,7 @@
menu "Processor features"
choice
prompt "Endianess selection"
prompt "Endianness selection"
default CPU_LITTLE_ENDIAN
help
Some SuperH machines can be configured for either little or big

View File

@ -16,7 +16,7 @@ menuconfig PM_DEVFREQ
is attached to a single device and returns a "representative"
clock frequency of the device, which is also attached
to a device by 1-to-1. The device registering devfreq takes the
responsiblity to "interpret" the representative frequency and
responsibility to "interpret" the representative frequency and
to set its every clock accordingly with the "target" callback
given to devfreq.

View File

@ -448,7 +448,7 @@ config HID_PICOLCD_FB
select FB_SYS_FOPS
---help---
Provide access to PicoLCD's 256x64 monochrome display via a
frambuffer device.
framebuffer device.
config HID_PICOLCD_BACKLIGHT
bool "Backlight control" if EXPERT

View File

@ -318,7 +318,7 @@ config SENSORS_EXYNOS4_TMU
tristate "Temperature sensor on Samsung EXYNOS4"
depends on ARCH_EXYNOS4
help
If you say yes here you get support for TMU (Thermal Managment
If you say yes here you get support for TMU (Thermal Management
Unit) on SAMSUNG EXYNOS4 series of SoC.
This driver can also be built as a module. If so, the module

View File

@ -351,7 +351,7 @@ config I2C_DAVINCI
For details please see http://www.ti.com/davinci
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platfrom"
tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
help
If you say yes to this option, support will be included for the

View File

@ -407,7 +407,7 @@ config MFD_MAX8925
select MFD_CORE
help
Say yes here to support for Maxim Semiconductor MAX8925. This is
a Power Management IC. This driver provies common support for
a Power Management IC. This driver provides common support for
accessing the device, additional drivers must be enabled in order
to use the functionality of the device.
@ -430,7 +430,7 @@ config MFD_MAX8998
help
Say yes here to support for Maxim Semiconductor MAX8998 and
National Semiconductor LP3974. This is a Power Management IC.
This driver provies common support for accessing the device,
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device.
@ -441,7 +441,7 @@ config MFD_S5M_CORE
select REGMAP_I2C
help
Support for the Samsung Electronics S5M MFD series.
This driver provies common support for accessing the device,
This driver provides common support for accessing the device,
additional drivers must be enabled in order to use the functionality
of the device

View File

@ -70,7 +70,7 @@ config DP83640_PHY
using the SO_TIMESTAMPING API.
In order for this to work, your MAC driver must also
implement the skb_tx_timetamp() function.
implement the skb_tx_timestamp() function.
config PTP_1588_CLOCK_PCH
tristate "Intel PCH EG20T as PTP clock"

View File

@ -937,7 +937,7 @@ config BCM47XX_WDT
tristate "Broadcom BCM47xx Watchdog Timer"
depends on BCM47XX
help
Hardware driver for the Broadcom BCM47xx Watchog Timer.
Hardware driver for the Broadcom BCM47xx Watchdog Timer.
config RC32434_WDT
tristate "IDT RC32434 SoC Watchdog Timer"

View File

@ -71,7 +71,7 @@ config XEN_DEV_EVTCHN
tristate "Xen /dev/xen/evtchn device"
default y
help
The evtchn driver allows a userspace process to triger event
The evtchn driver allows a userspace process to trigger event
channels and to receive notification of an event channel
firing.
If in doubt, say yes.