Linux 5.2-rc4

-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlz8fAYeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1asH/3ySguxqtqL1MCBa
 4/SZ37PHeWKMerfX6ZyJdgEqK3B+PWlmuLiOMNK5h2bPLzeQQQAmHU/mfKmpXqgB
 dHwUbG9yNnyUtTfsfRqAnCA6vpuw9Yb1oIzTCVQrgJLSWD0j7scBBvmzYqguOkto
 ThwigLUq3AILr8EfR4rh+GM+5Dn9OTEFAxwil9fPHQo7QoczwZxpURhScT6Co9TB
 DqLA3fvXbBvLs/CZy/S5vKM9hKzC+p39ApFTURvFPrelUVnythAM0dPDJg3pIn5u
 g+/+gDxDFa+7ANxvxO2ng1sJPDqJMeY/xmjJYlYyLpA33B7zLNk2vDHhAP06VTtr
 XCMhQ9s=
 =cb80
 -----END PGP SIGNATURE-----

Merge tag 'v5.2-rc4' into media/master

There are some conflicts due to SPDX changes. We also have more
patches being merged via media tree touching them.

So, let's merge back from upstream and address those.

Linux 5.2-rc4

* tag 'v5.2-rc4': (767 commits)
  Linux 5.2-rc4
  MAINTAINERS: Karthikeyan Ramasubramanian is MIA
  i2c: xiic: Add max_read_len quirk
  lockref: Limit number of cmpxchg loop retries
  uaccess: add noop untagged_addr definition
  x86/insn-eval: Fix use-after-free access to LDT entry
  kbuild: use more portable 'command -v' for cc-cross-prefix
  s390/unwind: correct stack switching during unwind
  block, bfq: add weight symlink to the bfq.weight cgroup parameter
  cgroup: let a symlink too be created with a cftype file
  drm/nouveau/secboot/gp10[2467]: support newer FW to fix SEC2 failures on some boards
  drm/nouveau/secboot: enable loading of versioned LS PMU/SEC2 ACR msgqueue FW
  drm/nouveau/secboot: split out FW version-specific LS function pointers
  drm/nouveau/secboot: pass max supported FW version to LS load funcs
  drm/nouveau/core: support versioned firmware loading
  drm/nouveau/core: pass subdev into nvkm_firmware_get, rather than device
  block: free sched's request pool in blk_cleanup_queue
  pktgen: do not sleep with the thread lock held.
  net: mvpp2: Use strscpy to handle stat strings
  net: rds: fix memory leak in rds_ib_flush_mr_pool
  ...

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
This commit is contained in:
Mauro Carvalho Chehab 2019-06-11 12:09:28 -04:00
commit 5800571960
12058 changed files with 18636 additions and 99777 deletions

View File

@ -3364,6 +3364,14 @@ S: Braunschweiger Strasse 79
S: 31134 Hildesheim
S: Germany
N: Martin Schwidefsky
D: Martin was the most significant contributor to the initial s390
D: port of the Linux Kernel and later the maintainer of the s390
D: architecture backend for almost two decades.
D: He passed away in 2019, and will be greatly missed.
S: Germany
W: https://lwn.net/Articles/789028/
N: Marcel Selhorst
E: tpmdd@selhorst.net
D: TPM driver

View File

@ -1,29 +0,0 @@
What: /sys/bus/mdio_bus/devices/.../phy_id
Date: November 2012
KernelVersion: 3.8
Contact: netdev@vger.kernel.org
Description:
This attribute contains the 32-bit PHY Identifier as reported
by the device during bus enumeration, encoded in hexadecimal.
This ID is used to match the device with the appropriate
driver.
What: /sys/bus/mdio_bus/devices/.../phy_interface
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
This attribute contains the PHY interface as configured by the
Ethernet driver during bus enumeration, encoded in string.
This interface mode is used to configure the Ethernet MAC with the
appropriate mode for its data lines to the PHY hardware.
What: /sys/bus/mdio_bus/devices/.../phy_has_fixups
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
This attribute contains the boolean value whether a given PHY
device has had any "fixup" workaround running on it, encoded as
a boolean. This information is provided to help troubleshooting
PHY configurations.

View File

@ -11,24 +11,31 @@ Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
Boolean value indicating whether the PHY device has
any fixups registered against it (phy_register_fixup)
This attribute contains the boolean value whether a given PHY
device has had any "fixup" workaround running on it, encoded as
a boolean. This information is provided to help troubleshooting
PHY configurations.
What: /sys/class/mdio_bus/<bus>/<device>/phy_id
Date: November 2012
KernelVersion: 3.8
Contact: netdev@vger.kernel.org
Description:
32-bit hexadecimal value corresponding to the PHY device's OUI,
model and revision number.
This attribute contains the 32-bit PHY Identifier as reported
by the device during bus enumeration, encoded in hexadecimal.
This ID is used to match the device with the appropriate
driver.
What: /sys/class/mdio_bus/<bus>/<device>/phy_interface
Date: February 2014
KernelVersion: 3.15
Contact: netdev@vger.kernel.org
Description:
String value indicating the PHY interface, possible
values are:.
This attribute contains the PHY interface as configured by the
Ethernet driver during bus enumeration, encoded in string.
This interface mode is used to configure the Ethernet MAC with the
appropriate mode for its data lines to the PHY hardware.
Possible values are:
<empty> (not available), mii, gmii, sgmii, tbi, rev-mii,
rmii, rgmii, rgmii-id, rgmii-rxid, rgmii-txid, rtbi, smii
xgmii, moca, qsgmii, trgmii, 1000base-x, 2500base-x, rxaui,

View File

@ -177,6 +177,15 @@ cgroup v2 currently supports the following mount options.
ignored on non-init namespace mounts. Please refer to the
Delegation section for details.
memory_localevents
Only populate memory.events with data for the current cgroup,
and not any subtrees. This is legacy behaviour, the default
behaviour without this option is to include subtree counts.
This option is system wide and can only be set on mount or
modified through remount from the init namespace. The mount
option is ignored on non-init namespace mounts.
Organizing Processes and Threads
--------------------------------

View File

@ -31,6 +31,7 @@ the Linux memory management.
ksm
memory-hotplug
numa_memory_policy
numaperf
pagemap
soft-dirty
transhuge

View File

@ -15,7 +15,7 @@ characteristics. Some memory may share the same node as a CPU, and others
are provided as memory only nodes. While memory only nodes do not provide
CPUs, they may still be local to one or more compute nodes relative to
other nodes. The following diagram shows one such example of two compute
nodes with local memory and a memory only node for each of compute node:
nodes with local memory and a memory only node for each of compute node::
+------------------+ +------------------+
| Compute Node 0 +-----+ Compute Node 1 |

View File

@ -37,7 +37,7 @@ needs_sphinx = '1.3'
extensions = ['kerneldoc', 'rstFlatTable', 'kernel_include', 'cdomain', 'kfigure', 'sphinx.ext.ifconfig']
# The name of the math extension changed on Sphinx 1.4
if major == 1 and minor > 3:
if (major == 1 and minor > 3) or (major > 1):
extensions.append("sphinx.ext.imgmath")
else:
extensions.append("sphinx.ext.pngmath")

View File

@ -336,8 +336,20 @@ the copied layers will fail the verification of the lower root file handle.
Non-standard behavior
---------------------
Overlayfs can now act as a POSIX compliant filesystem with the following
features turned on:
Current version of overlayfs can act as a mostly POSIX compliant
filesystem.
This is the list of cases that overlayfs doesn't currently handle:
a) POSIX mandates updating st_atime for reads. This is currently not
done in the case when the file resides on a lower layer.
b) If a file residing on a lower layer is opened for read-only and then
memory mapped with MAP_SHARED, then subsequent changes to the file are not
reflected in the memory mapping.
The following options allow overlayfs to act more like a standards
compliant filesystem:
1) "redirect_dir"

View File

@ -423,7 +423,7 @@ will be enumerated to depends on the device ID returned by _HID.
For example, the following ACPI sample might be used to enumerate an lm75-type
I2C temperature sensor and match it to the driver using the Device Tree
namespace link:
namespace link::
Device (TMP0)
{

View File

@ -0,0 +1,30 @@
.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
Vendor Device Drivers
=====================
Contents:
.. toctree::
:maxdepth: 2
freescale/dpaa2/index
intel/e100
intel/e1000
intel/e1000e
intel/fm10k
intel/igb
intel/igbvf
intel/ixgb
intel/ixgbe
intel/ixgbevf
intel/i40e
intel/iavf
intel/ice
.. only:: subproject
Indices
=======
* :ref:`genindex`

View File

@ -11,19 +11,7 @@ Contents:
batman-adv
can
can_ucan_protocol
device_drivers/freescale/dpaa2/index
device_drivers/intel/e100
device_drivers/intel/e1000
device_drivers/intel/e1000e
device_drivers/intel/fm10k
device_drivers/intel/igb
device_drivers/intel/igbvf
device_drivers/intel/ixgb
device_drivers/intel/ixgbe
device_drivers/intel/ixgbevf
device_drivers/intel/i40e
device_drivers/intel/iavf
device_drivers/intel/ice
device_drivers/index
dsa/index
devlink-info-versions
ieee802154
@ -40,6 +28,8 @@ Contents:
checksum-offloads
segmentation-offloads
scaling
tls
tls-offload
.. only:: subproject

File diff suppressed because one or more lines are too long

After

Width:  |  Height:  |  Size: 49 KiB

File diff suppressed because one or more lines are too long

After

Width:  |  Height:  |  Size: 6.4 KiB

File diff suppressed because one or more lines are too long

After

Width:  |  Height:  |  Size: 6.4 KiB

View File

@ -0,0 +1,482 @@
.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
==================
Kernel TLS offload
==================
Kernel TLS operation
====================
Linux kernel provides TLS connection offload infrastructure. Once a TCP
connection is in ``ESTABLISHED`` state user space can enable the TLS Upper
Layer Protocol (ULP) and install the cryptographic connection state.
For details regarding the user-facing interface refer to the TLS
documentation in :ref:`Documentation/networking/tls.rst <kernel_tls>`.
``ktls`` can operate in three modes:
* Software crypto mode (``TLS_SW``) - CPU handles the cryptography.
In most basic cases only crypto operations synchronous with the CPU
can be used, but depending on calling context CPU may utilize
asynchronous crypto accelerators. The use of accelerators introduces extra
latency on socket reads (decryption only starts when a read syscall
is made) and additional I/O load on the system.
* Packet-based NIC offload mode (``TLS_HW``) - the NIC handles crypto
on a packet by packet basis, provided the packets arrive in order.
This mode integrates best with the kernel stack and is described in detail
in the remaining part of this document
(``ethtool`` flags ``tls-hw-tx-offload`` and ``tls-hw-rx-offload``).
* Full TCP NIC offload mode (``TLS_HW_RECORD``) - mode of operation where
NIC driver and firmware replace the kernel networking stack
with its own TCP handling, it is not usable in production environments
making use of the Linux networking stack for example any firewalling
abilities or QoS and packet scheduling (``ethtool`` flag ``tls-hw-record``).
The operation mode is selected automatically based on device configuration,
offload opt-in or opt-out on per-connection basis is not currently supported.
TX
--
At a high level user write requests are turned into a scatter list, the TLS ULP
intercepts them, inserts record framing, performs encryption (in ``TLS_SW``
mode) and then hands the modified scatter list to the TCP layer. From this
point on the TCP stack proceeds as normal.
In ``TLS_HW`` mode the encryption is not performed in the TLS ULP.
Instead packets reach a device driver, the driver will mark the packets
for crypto offload based on the socket the packet is attached to,
and send them to the device for encryption and transmission.
RX
--
On the receive side if the device handled decryption and authentication
successfully, the driver will set the decrypted bit in the associated
:c:type:`struct sk_buff <sk_buff>`. The packets reach the TCP stack and
are handled normally. ``ktls`` is informed when data is queued to the socket
and the ``strparser`` mechanism is used to delineate the records. Upon read
request, records are retrieved from the socket and passed to decryption routine.
If device decrypted all the segments of the record the decryption is skipped,
otherwise software path handles decryption.
.. kernel-figure:: tls-offload-layers.svg
:alt: TLS offload layers
:align: center
:figwidth: 28em
Layers of Kernel TLS stack
Device configuration
====================
During driver initialization device sets the ``NETIF_F_HW_TLS_RX`` and
``NETIF_F_HW_TLS_TX`` features and installs its
:c:type:`struct tlsdev_ops <tlsdev_ops>`
pointer in the :c:member:`tlsdev_ops` member of the
:c:type:`struct net_device <net_device>`.
When TLS cryptographic connection state is installed on a ``ktls`` socket
(note that it is done twice, once for RX and once for TX direction,
and the two are completely independent), the kernel checks if the underlying
network device is offload-capable and attempts the offload. In case offload
fails the connection is handled entirely in software using the same mechanism
as if the offload was never tried.
Offload request is performed via the :c:member:`tls_dev_add` callback of
:c:type:`struct tlsdev_ops <tlsdev_ops>`:
.. code-block:: c
int (*tls_dev_add)(struct net_device *netdev, struct sock *sk,
enum tls_offload_ctx_dir direction,
struct tls_crypto_info *crypto_info,
u32 start_offload_tcp_sn);
``direction`` indicates whether the cryptographic information is for
the received or transmitted packets. Driver uses the ``sk`` parameter
to retrieve the connection 5-tuple and socket family (IPv4 vs IPv6).
Cryptographic information in ``crypto_info`` includes the key, iv, salt
as well as TLS record sequence number. ``start_offload_tcp_sn`` indicates
which TCP sequence number corresponds to the beginning of the record with
sequence number from ``crypto_info``. The driver can add its state
at the end of kernel structures (see :c:member:`driver_state` members
in ``include/net/tls.h``) to avoid additional allocations and pointer
dereferences.
TX
--
After TX state is installed, the stack guarantees that the first segment
of the stream will start exactly at the ``start_offload_tcp_sn`` sequence
number, simplifying TCP sequence number matching.
TX offload being fully initialized does not imply that all segments passing
through the driver and which belong to the offloaded socket will be after
the expected sequence number and will have kernel record information.
In particular, already encrypted data may have been queued to the socket
before installing the connection state in the kernel.
RX
--
In RX direction local networking stack has little control over the segmentation,
so the initial records' TCP sequence number may be anywhere inside the segment.
Normal operation
================
At the minimum the device maintains the following state for each connection, in
each direction:
* crypto secrets (key, iv, salt)
* crypto processing state (partial blocks, partial authentication tag, etc.)
* record metadata (sequence number, processing offset and length)
* expected TCP sequence number
There are no guarantees on record length or record segmentation. In particular
segments may start at any point of a record and contain any number of records.
Assuming segments are received in order, the device should be able to perform
crypto operations and authentication regardless of segmentation. For this
to be possible device has to keep small amount of segment-to-segment state.
This includes at least:
* partial headers (if a segment carried only a part of the TLS header)
* partial data block
* partial authentication tag (all data had been seen but part of the
authentication tag has to be written or read from the subsequent segment)
Record reassembly is not necessary for TLS offload. If the packets arrive
in order the device should be able to handle them separately and make
forward progress.
TX
--
The kernel stack performs record framing reserving space for the authentication
tag and populating all other TLS header and tailer fields.
Both the device and the driver maintain expected TCP sequence numbers
due to the possibility of retransmissions and the lack of software fallback
once the packet reaches the device.
For segments passed in order, the driver marks the packets with
a connection identifier (note that a 5-tuple lookup is insufficient to identify
packets requiring HW offload, see the :ref:`5tuple_problems` section)
and hands them to the device. The device identifies the packet as requiring
TLS handling and confirms the sequence number matches its expectation.
The device performs encryption and authentication of the record data.
It replaces the authentication tag and TCP checksum with correct values.
RX
--
Before a packet is DMAed to the host (but after NIC's embedded switching
and packet transformation functions) the device validates the Layer 4
checksum and performs a 5-tuple lookup to find any TLS connection the packet
may belong to (technically a 4-tuple
lookup is sufficient - IP addresses and TCP port numbers, as the protocol
is always TCP). If connection is matched device confirms if the TCP sequence
number is the expected one and proceeds to TLS handling (record delineation,
decryption, authentication for each record in the packet). The device leaves
the record framing unmodified, the stack takes care of record decapsulation.
Device indicates successful handling of TLS offload in the per-packet context
(descriptor) passed to the host.
Upon reception of a TLS offloaded packet, the driver sets
the :c:member:`decrypted` mark in :c:type:`struct sk_buff <sk_buff>`
corresponding to the segment. Networking stack makes sure decrypted
and non-decrypted segments do not get coalesced (e.g. by GRO or socket layer)
and takes care of partial decryption.
Resync handling
===============
In presence of packet drops or network packet reordering, the device may lose
synchronization with the TLS stream, and require a resync with the kernel's
TCP stack.
Note that resync is only attempted for connections which were successfully
added to the device table and are in TLS_HW mode. For example,
if the table was full when cryptographic state was installed in the kernel,
such connection will never get offloaded. Therefore the resync request
does not carry any cryptographic connection state.
TX
--
Segments transmitted from an offloaded socket can get out of sync
in similar ways to the receive side-retransmissions - local drops
are possible, though network reorders are not.
Whenever an out of order segment is transmitted the driver provides
the device with enough information to perform cryptographic operations.
This means most likely that the part of the record preceding the current
segment has to be passed to the device as part of the packet context,
together with its TCP sequence number and TLS record number. The device
can then initialize its crypto state, process and discard the preceding
data (to be able to insert the authentication tag) and move onto handling
the actual packet.
In this mode depending on the implementation the driver can either ask
for a continuation with the crypto state and the new sequence number
(next expected segment is the one after the out of order one), or continue
with the previous stream state - assuming that the out of order segment
was just a retransmission. The former is simpler, and does not require
retransmission detection therefore it is the recommended method until
such time it is proven inefficient.
RX
--
A small amount of RX reorder events may not require a full resynchronization.
In particular the device should not lose synchronization
when record boundary can be recovered:
.. kernel-figure:: tls-offload-reorder-good.svg
:alt: reorder of non-header segment
:align: center
Reorder of non-header segment
Green segments are successfully decrypted, blue ones are passed
as received on wire, red stripes mark start of new records.
In above case segment 1 is received and decrypted successfully.
Segment 2 was dropped so 3 arrives out of order. The device knows
the next record starts inside 3, based on record length in segment 1.
Segment 3 is passed untouched, because due to lack of data from segment 2
the remainder of the previous record inside segment 3 cannot be handled.
The device can, however, collect the authentication algorithm's state
and partial block from the new record in segment 3 and when 4 and 5
arrive continue decryption. Finally when 2 arrives it's completely outside
of expected window of the device so it's passed as is without special
handling. ``ktls`` software fallback handles the decryption of record
spanning segments 1, 2 and 3. The device did not get out of sync,
even though two segments did not get decrypted.
Kernel synchronization may be necessary if the lost segment contained
a record header and arrived after the next record header has already passed:
.. kernel-figure:: tls-offload-reorder-bad.svg
:alt: reorder of header segment
:align: center
Reorder of segment with a TLS header
In this example segment 2 gets dropped, and it contains a record header.
Device can only detect that segment 4 also contains a TLS header
if it knows the length of the previous record from segment 2. In this case
the device will lose synchronization with the stream.
When the device gets out of sync and the stream reaches TCP sequence
numbers more than a max size record past the expected TCP sequence number,
the device starts scanning for a known header pattern. For example
for TLS 1.2 and TLS 1.3 subsequent bytes of value ``0x03 0x03`` occur
in the SSL/TLS version field of the header. Once pattern is matched
the device continues attempting parsing headers at expected locations
(based on the length fields at guessed locations).
Whenever the expected location does not contain a valid header the scan
is restarted.
When the header is matched the device sends a confirmation request
to the kernel, asking if the guessed location is correct (if a TLS record
really starts there), and which record sequence number the given header had.
The kernel confirms the guessed location was correct and tells the device
the record sequence number. Meanwhile, the device had been parsing
and counting all records since the just-confirmed one, it adds the number
of records it had seen to the record number provided by the kernel.
At this point the device is in sync and can resume decryption at next
segment boundary.
In a pathological case the device may latch onto a sequence of matching
headers and never hear back from the kernel (there is no negative
confirmation from the kernel). The implementation may choose to periodically
restart scan. Given how unlikely falsely-matching stream is, however,
periodic restart is not deemed necessary.
Special care has to be taken if the confirmation request is passed
asynchronously to the packet stream and record may get processed
by the kernel before the confirmation request.
Error handling
==============
TX
--
Packets may be redirected or rerouted by the stack to a different
device than the selected TLS offload device. The stack will handle
such condition using the :c:func:`sk_validate_xmit_skb` helper
(TLS offload code installs :c:func:`tls_validate_xmit_skb` at this hook).
Offload maintains information about all records until the data is
fully acknowledged, so if skbs reach the wrong device they can be handled
by software fallback.
Any device TLS offload handling error on the transmission side must result
in the packet being dropped. For example if a packet got out of order
due to a bug in the stack or the device, reached the device and can't
be encrypted such packet must be dropped.
RX
--
If the device encounters any problems with TLS offload on the receive
side it should pass the packet to the host's networking stack as it was
received on the wire.
For example authentication failure for any record in the segment should
result in passing the unmodified packet to the software fallback. This means
packets should not be modified "in place". Splitting segments to handle partial
decryption is not advised. In other words either all records in the packet
had been handled successfully and authenticated or the packet has to be passed
to the host's stack as it was on the wire (recovering original packet in the
driver if device provides precise error is sufficient).
The Linux networking stack does not provide a way of reporting per-packet
decryption and authentication errors, packets with errors must simply not
have the :c:member:`decrypted` mark set.
A packet should also not be handled by the TLS offload if it contains
incorrect checksums.
Performance metrics
===================
TLS offload can be characterized by the following basic metrics:
* max connection count
* connection installation rate
* connection installation latency
* total cryptographic performance
Note that each TCP connection requires a TLS session in both directions,
the performance may be reported treating each direction separately.
Max connection count
--------------------
The number of connections device can support can be exposed via
``devlink resource`` API.
Total cryptographic performance
-------------------------------
Offload performance may depend on segment and record size.
Overload of the cryptographic subsystem of the device should not have
significant performance impact on non-offloaded streams.
Statistics
==========
Following minimum set of TLS-related statistics should be reported
by the driver:
* ``rx_tls_decrypted`` - number of successfully decrypted TLS segments
* ``tx_tls_encrypted`` - number of in-order TLS segments passed to device
for encryption
* ``tx_tls_ooo`` - number of TX packets which were part of a TLS stream
but did not arrive in the expected order
* ``tx_tls_drop_no_sync_data`` - number of TX packets dropped because
they arrived out of order and associated record could not be found
(see also :ref:`pre_tls_data`)
Notable corner cases, exceptions and additional requirements
============================================================
.. _5tuple_problems:
5-tuple matching limitations
----------------------------
The device can only recognize received packets based on the 5-tuple
of the socket. Current ``ktls`` implementation will not offload sockets
routed through software interfaces such as those used for tunneling
or virtual networking. However, many packet transformations performed
by the networking stack (most notably any BPF logic) do not require
any intermediate software device, therefore a 5-tuple match may
consistently miss at the device level. In such cases the device
should still be able to perform TX offload (encryption) and should
fallback cleanly to software decryption (RX).
Out of order
------------
Introducing extra processing in NICs should not cause packets to be
transmitted or received out of order, for example pure ACK packets
should not be reordered with respect to data segments.
Ingress reorder
---------------
A device is permitted to perform packet reordering for consecutive
TCP segments (i.e. placing packets in the correct order) but any form
of additional buffering is disallowed.
Coexistence with standard networking offload features
-----------------------------------------------------
Offloaded ``ktls`` sockets should support standard TCP stack features
transparently. Enabling device TLS offload should not cause any difference
in packets as seen on the wire.
Transport layer transparency
----------------------------
The device should not modify any packet headers for the purpose
of the simplifying TLS offload.
The device should not depend on any packet headers beyond what is strictly
necessary for TLS offload.
Segment drops
-------------
Dropping packets is acceptable only in the event of catastrophic
system errors and should never be used as an error handling mechanism
in cases arising from normal operation. In other words, reliance
on TCP retransmissions to handle corner cases is not acceptable.
TLS device features
-------------------
Drivers should ignore the changes to TLS the device feature flags.
These flags will be acted upon accordingly by the core ``ktls`` code.
TLS device feature flags only control adding of new TLS connection
offloads, old connections will remain active after flags are cleared.
Known bugs
==========
skb_orphan() leaks clear text
-----------------------------
Currently drivers depend on the :c:member:`sk` member of
:c:type:`struct sk_buff <sk_buff>` to identify segments requiring
encryption. Any operation which removes or does not preserve the socket
association such as :c:func:`skb_orphan` or :c:func:`skb_clone`
will cause the driver to miss the packets and lead to clear text leaks.
Redirects leak clear text
-------------------------
In the RX direction, if segment has already been decrypted by the device
and it gets redirected or mirrored - clear text will be transmitted out.
.. _pre_tls_data:
Transmission of pre-TLS data
----------------------------
User can enqueue some already encrypted and framed records before enabling
``ktls`` on the socket. Those records have to get sent as they are. This is
perfectly easy to handle in the software case - such data will be waiting
in the TCP layer, TLS ULP won't see it. In the offloaded case when pre-queued
segment reaches transmission point it appears to be out of order (before the
expected TCP sequence number) and the stack does not have a record information
associated.
All segments without record information cannot, however, be assumed to be
pre-queued data, because a race condition exists between TCP stack queuing
a retransmission, the driver seeing the retransmission and TCP ACK arriving
for the retransmitted data.

View File

@ -1,3 +1,9 @@
.. _kernel_tls:
==========
Kernel TLS
==========
Overview
========
@ -12,6 +18,8 @@ Creating a TLS connection
First create a new TCP socket and set the TLS ULP.
.. code-block:: c
sock = socket(AF_INET, SOCK_STREAM, 0);
setsockopt(sock, SOL_TCP, TCP_ULP, "tls", sizeof("tls"));
@ -21,6 +29,8 @@ handshake is complete, we have all the parameters required to move the
data-path to the kernel. There is a separate socket option for moving
the transmit and the receive into the kernel.
.. code-block:: c
/* From linux/tls.h */
struct tls_crypto_info {
unsigned short version;
@ -58,6 +68,8 @@ After setting the TLS_TX socket option all application data sent over this
socket is encrypted using TLS and the parameters provided in the socket option.
For example, we can send an encrypted hello world record as follows:
.. code-block:: c
const char *msg = "hello world\n";
send(sock, msg, strlen(msg));
@ -67,6 +79,8 @@ to the encrypted kernel send buffer if possible.
The sendfile system call will send the file's data over TLS records of maximum
length (2^14).
.. code-block:: c
file = open(filename, O_RDONLY);
fstat(file, &stat);
sendfile(sock, file, &offset, stat.st_size);
@ -89,6 +103,8 @@ After setting the TLS_RX socket option, all recv family socket calls
are decrypted using TLS parameters provided. A full TLS record must
be received before decryption can happen.
.. code-block:: c
char buffer[16384];
recv(sock, buffer, 16384);
@ -97,12 +113,12 @@ large enough, and no additional allocations occur. If the userspace
buffer is too small, data is decrypted in the kernel and copied to
userspace.
EINVAL is returned if the TLS version in the received message does not
``EINVAL`` is returned if the TLS version in the received message does not
match the version passed in setsockopt.
EMSGSIZE is returned if the received message is too big.
``EMSGSIZE`` is returned if the received message is too big.
EBADMSG is returned if decryption failed for any other reason.
``EBADMSG`` is returned if decryption failed for any other reason.
Send TLS control messages
-------------------------
@ -113,9 +129,11 @@ These messages can be sent over the socket by providing the TLS record type
via a CMSG. For example the following function sends @data of @length bytes
using a record of type @record_type.
/* send TLS control message using record_type */
.. code-block:: c
/* send TLS control message using record_type */
static int klts_send_ctrl_message(int sock, unsigned char record_type,
void *data, size_t length)
void *data, size_t length)
{
struct msghdr msg = {0};
int cmsg_len = sizeof(record_type);
@ -151,6 +169,8 @@ type passed via cmsg. If no cmsg buffer is provided, an error is
returned if a control message is received. Data messages may be
received without a cmsg buffer set.
.. code-block:: c
char buffer[16384];
char cmsg[CMSG_SPACE(sizeof(unsigned char))];
struct msghdr msg = {0};
@ -186,12 +206,10 @@ Integrating in to userspace TLS library
At a high level, the kernel TLS ULP is a replacement for the record
layer of a userspace TLS library.
A patchset to OpenSSL to use ktls as the record layer is here:
A patchset to OpenSSL to use ktls as the record layer is
`here <https://github.com/Mellanox/openssl/commits/tls_rx2>`_.
https://github.com/Mellanox/openssl/commits/tls_rx2
An example of calling send directly after a handshake using
gnutls. Since it doesn't implement a full record layer, control
messages are not supported:
https://github.com/ktls/af_ktls-tool/commits/RX
`An example <https://github.com/ktls/af_ktls-tool/commits/RX>`_
of calling send directly after a handshake using gnutls.
Since it doesn't implement a full record layer, control
messages are not supported.

View File

@ -37,7 +37,19 @@ import glob
from docutils import nodes, statemachine
from docutils.statemachine import ViewList
from docutils.parsers.rst import directives, Directive
from sphinx.ext.autodoc import AutodocReporter
#
# AutodocReporter is only good up to Sphinx 1.7
#
import sphinx
Use_SSI = sphinx.__version__[:3] >= '1.7'
if Use_SSI:
from sphinx.util.docutils import switch_source_input
else:
from sphinx.ext.autodoc import AutodocReporter
import kernellog
__version__ = '1.0'
@ -90,7 +102,8 @@ class KernelDocDirective(Directive):
cmd += [filename]
try:
env.app.verbose('calling kernel-doc \'%s\'' % (" ".join(cmd)))
kernellog.verbose(env.app,
'calling kernel-doc \'%s\'' % (" ".join(cmd)))
p = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE)
out, err = p.communicate()
@ -100,7 +113,8 @@ class KernelDocDirective(Directive):
if p.returncode != 0:
sys.stderr.write(err)
env.app.warn('kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
kernellog.warn(env.app,
'kernel-doc \'%s\' failed with return code %d' % (" ".join(cmd), p.returncode))
return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
elif env.config.kerneldoc_verbosity > 0:
sys.stderr.write(err)
@ -121,20 +135,28 @@ class KernelDocDirective(Directive):
lineoffset += 1
node = nodes.section()
buf = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
self.do_parse(result, node)
return node.children
except Exception as e: # pylint: disable=W0703
kernellog.warn(env.app, 'kernel-doc \'%s\' processing failed with: %s' %
(" ".join(cmd), str(e)))
return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
def do_parse(self, result, node):
if Use_SSI:
with switch_source_input(self.state, result):
self.state.nested_parse(result, 0, node, match_titles=1)
else:
save = self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter
self.state.memo.reporter = AutodocReporter(result, self.state.memo.reporter)
self.state.memo.title_styles, self.state.memo.section_level = [], 0
try:
self.state.nested_parse(result, 0, node, match_titles=1)
finally:
self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = buf
self.state.memo.title_styles, self.state.memo.section_level, self.state.memo.reporter = save
return node.children
except Exception as e: # pylint: disable=W0703
env.app.warn('kernel-doc \'%s\' processing failed with: %s' %
(" ".join(cmd), str(e)))
return [nodes.error(None, nodes.paragraph(text = "kernel-doc missing"))]
def setup(app):
app.add_config_value('kerneldoc_bin', None, 'env')

View File

@ -0,0 +1,28 @@
# SPDX-License-Identifier: GPL-2.0
#
# Sphinx has deprecated its older logging interface, but the replacement
# only goes back to 1.6. So here's a wrapper layer to keep around for
# as long as we support 1.4.
#
import sphinx
if sphinx.__version__[:3] >= '1.6':
UseLogging = True
from sphinx.util import logging
logger = logging.getLogger('kerneldoc')
else:
UseLogging = False
def warn(app, message):
if UseLogging:
logger.warning(message)
else:
app.warn(message)
def verbose(app, message):
if UseLogging:
logger.verbose(message)
else:
app.verbose(message)

View File

@ -60,6 +60,8 @@ import sphinx
from sphinx.util.nodes import clean_astext
from six import iteritems
import kernellog
PY3 = sys.version_info[0] == 3
if PY3:
@ -171,20 +173,20 @@ def setupTools(app):
This function is called once, when the builder is initiated.
"""
global dot_cmd, convert_cmd # pylint: disable=W0603
app.verbose("kfigure: check installed tools ...")
kernellog.verbose(app, "kfigure: check installed tools ...")
dot_cmd = which('dot')
convert_cmd = which('convert')
if dot_cmd:
app.verbose("use dot(1) from: " + dot_cmd)
kernellog.verbose(app, "use dot(1) from: " + dot_cmd)
else:
app.warn("dot(1) not found, for better output quality install "
"graphviz from http://www.graphviz.org")
kernellog.warn(app, "dot(1) not found, for better output quality install "
"graphviz from http://www.graphviz.org")
if convert_cmd:
app.verbose("use convert(1) from: " + convert_cmd)
kernellog.verbose(app, "use convert(1) from: " + convert_cmd)
else:
app.warn(
kernellog.warn(app,
"convert(1) not found, for SVG to PDF conversion install "
"ImageMagick (https://www.imagemagick.org)")
@ -220,12 +222,13 @@ def convert_image(img_node, translator, src_fname=None):
# in kernel builds, use 'make SPHINXOPTS=-v' to see verbose messages
app.verbose('assert best format for: ' + img_node['uri'])
kernellog.verbose(app, 'assert best format for: ' + img_node['uri'])
if in_ext == '.dot':
if not dot_cmd:
app.verbose("dot from graphviz not available / include DOT raw.")
kernellog.verbose(app,
"dot from graphviz not available / include DOT raw.")
img_node.replace_self(file2literal(src_fname))
elif translator.builder.format == 'latex':
@ -252,7 +255,8 @@ def convert_image(img_node, translator, src_fname=None):
if translator.builder.format == 'latex':
if convert_cmd is None:
app.verbose("no SVG to PDF conversion available / include SVG raw.")
kernellog.verbose(app,
"no SVG to PDF conversion available / include SVG raw.")
img_node.replace_self(file2literal(src_fname))
else:
dst_fname = path.join(translator.builder.outdir, fname + '.pdf')
@ -265,18 +269,19 @@ def convert_image(img_node, translator, src_fname=None):
_name = dst_fname[len(translator.builder.outdir) + 1:]
if isNewer(dst_fname, src_fname):
app.verbose("convert: {out}/%s already exists and is newer" % _name)
kernellog.verbose(app,
"convert: {out}/%s already exists and is newer" % _name)
else:
ok = False
mkdir(path.dirname(dst_fname))
if in_ext == '.dot':
app.verbose('convert DOT to: {out}/' + _name)
kernellog.verbose(app, 'convert DOT to: {out}/' + _name)
ok = dot2format(app, src_fname, dst_fname)
elif in_ext == '.svg':
app.verbose('convert SVG to: {out}/' + _name)
kernellog.verbose(app, 'convert SVG to: {out}/' + _name)
ok = svg2pdf(app, src_fname, dst_fname)
if not ok:
@ -305,7 +310,8 @@ def dot2format(app, dot_fname, out_fname):
with open(out_fname, "w") as out:
exit_code = subprocess.call(cmd, stdout = out)
if exit_code != 0:
app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
kernellog.warn(app,
"Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
return bool(exit_code == 0)
def svg2pdf(app, svg_fname, pdf_fname):
@ -322,7 +328,7 @@ def svg2pdf(app, svg_fname, pdf_fname):
# use stdout and stderr from parent
exit_code = subprocess.call(cmd)
if exit_code != 0:
app.warn("Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
kernellog.warn(app, "Error #%d when calling: %s" % (exit_code, " ".join(cmd)))
return bool(exit_code == 0)
@ -415,15 +421,15 @@ def visit_kernel_render(self, node):
app = self.builder.app
srclang = node.get('srclang')
app.verbose('visit kernel-render node lang: "%s"' % (srclang))
kernellog.verbose(app, 'visit kernel-render node lang: "%s"' % (srclang))
tmp_ext = RENDER_MARKUP_EXT.get(srclang, None)
if tmp_ext is None:
app.warn('kernel-render: "%s" unknown / include raw.' % (srclang))
kernellog.warn(app, 'kernel-render: "%s" unknown / include raw.' % (srclang))
return
if not dot_cmd and tmp_ext == '.dot':
app.verbose("dot from graphviz not available / include raw.")
kernellog.verbose(app, "dot from graphviz not available / include raw.")
return
literal_block = node[0]

View File

@ -76,70 +76,30 @@ Additional Information and userspace tools
Requirements
============
A host with a USB port. Ideally, either a UHCI (Intel) or OHCI
(Compaq and others) hardware port should work.
A host with a USB port running a Linux kernel with RIO 500 support enabled.
A Linux development kernel (2.3.x) with USB support enabled or a
backported version to linux-2.2.x. See http://www.linux-usb.org for
more information on accomplishing this.
The driver is a module called rio500, which should be automatically loaded
as you plug in your device. If that fails you can manually load it with
A Linux kernel with RIO 500 support enabled.
modprobe rio500
'lspci' which is only needed to determine the type of USB hardware
available in your machine.
Configuration
Using `lspci -v`, determine the type of USB hardware available.
If you see something like::
USB Controller: ......
Flags: .....
I/O ports at ....
Then you have a UHCI based controller.
If you see something like::
USB Controller: .....
Flags: ....
Memory at .....
Then you have a OHCI based controller.
Using `make menuconfig` or your preferred method for configuring the
kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
hardware (determined from the steps above), 'USB Diamond Rio500 support', and
'Preliminary USB device filesystem'. Compile and install the modules
(you may need to execute `depmod -a` to update the module
dependencies).
Add a device for the USB rio500::
Udev should automatically create a device node as soon as plug in your device.
If that fails, you can manually add a device for the USB rio500::
mknod /dev/usb/rio500 c 180 64
Set appropriate permissions for /dev/usb/rio500 (don't forget about
group and world permissions). Both read and write permissions are
In that case, set appropriate permissions for /dev/usb/rio500 (don't forget
about group and world permissions). Both read and write permissions are
required for proper operation.
Load the appropriate modules (if compiled as modules):
OHCI::
modprobe usbcore
modprobe usb-ohci
modprobe rio500
UHCI::
modprobe usbcore
modprobe usb-uhci (or uhci)
modprobe rio500
That's it. The Rio500 Utils at: http://rio500.sourceforge.net should
be able to access the rio500.
Limits
======
You can use only a single rio500 device at a time with your computer.
Bugs
====

View File

@ -288,15 +288,17 @@ For instance if the device flags for device entries are:
WRITE (1 << 62)
Now let say that device driver wants to fault with at least read a range then
it does set:
range->default_flags = (1 << 63)
it does set::
range->default_flags = (1 << 63);
range->pfn_flags_mask = 0;
and calls hmm_range_fault() as described above. This will fill fault all page
in the range with at least read permission.
Now let say driver wants to do the same except for one page in the range for
which its want to have write. Now driver set:
which its want to have write. Now driver set::
range->default_flags = (1 << 63);
range->pfn_flags_mask = (1 << 62);
range->pfns[index_of_write] = (1 << 62);

View File

@ -703,6 +703,7 @@ F: drivers/input/mouse/alps.*
ALTERA I2C CONTROLLER DRIVER
M: Thor Thayer <thor.thayer@linux.intel.com>
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-altera.txt
F: drivers/i2c/busses/i2c-altera.c
ALTERA MAILBOX DRIVER
@ -1181,6 +1182,7 @@ S: Maintained
F: Documentation/devicetree/bindings/arm/arm-boards
F: Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
F: Documentation/devicetree/bindings/clock/arm-integrator.txt
F: Documentation/devicetree/bindings/i2c/i2c-versatile.txt
F: Documentation/devicetree/bindings/interrupt-controller/arm,versatile-fpga-irq.txt
F: Documentation/devicetree/bindings/mtd/arm-versatile.txt
F: arch/arm/mach-integrator/
@ -1788,6 +1790,7 @@ ARM/LPC18XX ARCHITECTURE
M: Vladimir Zapolskiy <vz@mleia.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-lpc2k.txt
F: arch/arm/boot/dts/lpc43*
F: drivers/i2c/busses/i2c-lpc2k.c
F: drivers/memory/pl172.c
@ -1801,6 +1804,7 @@ M: Sylvain Lemieux <slemieux.tyco@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://github.com/vzapolskiy/linux-lpc32xx.git
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-pnx.txt
F: arch/arm/boot/dts/lpc32*
F: arch/arm/mach-lpc32xx/
F: drivers/i2c/busses/i2c-pnx.c
@ -1925,6 +1929,8 @@ ARM/NOMADIK/U300/Ux500 ARCHITECTURES
M: Linus Walleij <linus.walleij@linaro.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-nomadik.txt
F: Documentation/devicetree/bindings/i2c/i2c-stu300.txt
F: arch/arm/mach-nomadik/
F: arch/arm/mach-u300/
F: arch/arm/mach-ux500/
@ -2147,6 +2153,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-rockchip@lists.infradead.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
F: arch/arm/boot/dts/rk3*
F: arch/arm/boot/dts/rv1108*
F: arch/arm/mach-rockchip/
@ -2282,6 +2289,7 @@ M: Patrice Chotard <patrice.chotard@st.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.stlinux.com
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-st.txt
F: arch/arm/mach-sti/
F: arch/arm/boot/dts/sti*
F: drivers/char/hw_random/st-rng.c
@ -2473,6 +2481,7 @@ ARM/VT8500 ARM ARCHITECTURE
M: Tony Prisk <linux@prisktech.co.nz>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-wmt.txt
F: arch/arm/mach-vt8500/
F: drivers/clocksource/timer-vt8500.c
F: drivers/i2c/busses/i2c-wmt.c
@ -2538,6 +2547,8 @@ F: drivers/cpuidle/cpuidle-zynq.c
F: drivers/block/xsysace.c
N: zynq
N: xilinx
F: Documentation/devicetree/bindings/i2c/i2c-cadence.txt
F: Documentation/devicetree/bindings/i2c/i2c-xiic.txt
F: drivers/clocksource/timer-cadence-ttc.c
F: drivers/i2c/busses/i2c-cadence.c
F: drivers/mmc/host/sdhci-of-arasan.c
@ -3056,8 +3067,9 @@ S: Maintained
F: arch/riscv/net/
BPF JIT for S390
M: Martin Schwidefsky <schwidefsky@de.ibm.com>
M: Heiko Carstens <heiko.carstens@de.ibm.com>
M: Vasily Gorbik <gor@linux.ibm.com>
M: Christian Borntraeger <borntraeger@de.ibm.com>
L: netdev@vger.kernel.org
L: bpf@vger.kernel.org
S: Maintained
@ -7348,6 +7360,7 @@ I2C MV64XXX MARVELL AND ALLWINNER DRIVER
M: Gregory CLEMENT <gregory.clement@bootlin.com>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-mv64xxx.txt
F: drivers/i2c/busses/i2c-mv64xxx.c
I2C OVER PARALLEL PORT
@ -11739,6 +11752,7 @@ M: Peter Korsgaard <peter@korsgaard.com>
M: Andrew Lunn <andrew@lunn.ch>
L: linux-i2c@vger.kernel.org
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-ocores.txt
F: Documentation/i2c/busses/i2c-ocores
F: drivers/i2c/busses/i2c-ocores.c
F: include/linux/platform_data/i2c-ocores.h
@ -13058,7 +13072,6 @@ F: Documentation/devicetree/bindings/net/qcom,dwmac.txt
QUALCOMM GENERIC INTERFACE I2C DRIVER
M: Alok Chauhan <alokc@codeaurora.org>
M: Karthikeyan Ramasubramanian <kramasub@codeaurora.org>
L: linux-i2c@vger.kernel.org
L: linux-arm-msm@vger.kernel.org
S: Supported
@ -13378,6 +13391,7 @@ F: drivers/clk/renesas/
RENESAS EMEV2 I2C DRIVER
M: Wolfram Sang <wsa+renesas@sang-engineering.com>
S: Supported
F: Documentation/devicetree/bindings/i2c/i2c-emev2.txt
F: drivers/i2c/busses/i2c-emev2.c
RENESAS ETHERNET DRIVERS
@ -13399,6 +13413,8 @@ F: drivers/iio/adc/rcar-gyroadc.c
RENESAS R-CAR I2C DRIVERS
M: Wolfram Sang <wsa+renesas@sang-engineering.com>
S: Supported
F: Documentation/devicetree/bindings/i2c/i2c-rcar.txt
F: Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt
F: drivers/i2c/busses/i2c-rcar.c
F: drivers/i2c/busses/i2c-sh_mobile.c
@ -13629,8 +13645,9 @@ S: Maintained
F: drivers/video/fbdev/savage/
S390
M: Martin Schwidefsky <schwidefsky@de.ibm.com>
M: Heiko Carstens <heiko.carstens@de.ibm.com>
M: Vasily Gorbik <gor@linux.ibm.com>
M: Christian Borntraeger <borntraeger@de.ibm.com>
L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
T: git git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git
@ -14992,7 +15009,7 @@ S: Odd Fixes
F: drivers/net/ethernet/adaptec/starfire*
STEC S1220 SKD DRIVER
M: Bart Van Assche <bart.vanassche@wdc.com>
M: Damien Le Moal <Damien.LeMoal@wdc.com>
L: linux-block@vger.kernel.org
S: Maintained
F: drivers/block/skd*[ch]
@ -15687,6 +15704,7 @@ R: Bartosz Golaszewski <bgolaszewski@baylibre.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci.git
S: Supported
F: Documentation/devicetree/bindings/i2c/i2c-davinci.txt
F: arch/arm/mach-davinci/
F: drivers/i2c/busses/i2c-davinci.c
F: arch/arm/boot/dts/da850*
@ -17308,7 +17326,7 @@ F: Documentation/ABI/stable/sysfs-hypervisor-xen
F: Documentation/ABI/testing/sysfs-hypervisor-xen
XEN NETWORK BACKEND DRIVER
M: Wei Liu <wei.liu2@citrix.com>
M: Wei Liu <wei.liu@kernel.org>
M: Paul Durrant <paul.durrant@citrix.com>
L: xen-devel@lists.xenproject.org (moderated for non-subscribers)
L: netdev@vger.kernel.org
@ -17390,6 +17408,7 @@ M: Jan Glauber <jglauber@cavium.com>
L: linux-i2c@vger.kernel.org
W: http://www.cavium.com
S: Supported
F: Documentation/devicetree/bindings/i2c/i2c-xlp9xx.txt
F: drivers/i2c/busses/i2c-xlp9xx.c
XRA1403 GPIO EXPANDER

View File

@ -2,7 +2,7 @@
VERSION = 5
PATCHLEVEL = 2
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Golden Lions
# *DOCUMENTATION*
@ -1228,9 +1228,8 @@ kselftest-clean:
PHONY += kselftest-merge
kselftest-merge:
$(if $(wildcard $(objtree)/.config),, $(error No .config exists, config your kernel first!))
$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh \
-m $(objtree)/.config \
$(srctree)/tools/testing/selftests/*/config
$(Q)find $(srctree)/tools/testing/selftests -name config | \
xargs $(srctree)/scripts/kconfig/merge_config.sh -m $(objtree)/.config
+$(Q)$(MAKE) -f $(srctree)/Makefile olddefconfig
# ---------------------------------------------------------------------------

View File

@ -1,10 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) Paul Mackerras 1997.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <stdarg.h>
#include <stddef.h>

View File

@ -1,7 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Arch specific extensions to struct device
*
* This file is released under the GPLv2
*/
#include <asm-generic/device.h>

View File

@ -1 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
generated-y += unistd_32.h

View File

@ -1,19 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/* Kernel module help for Alpha.
Copyright (C) 2002 Richard Henderson.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/moduleloader.h>
#include <linux/elf.h>

View File

@ -1,3 +1,4 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* srm_env.c - Access to SRM environment
* variables through linux' procfs
@ -9,23 +10,6 @@
* <J.A.K.Mouw@its.tudelft.nl>. It is based on an idea
* provided by DEC^WCompaq^WIntel's "Jumpstart" CD. They
* included a patch like this as well. Thanks for idea!
*
* This program is free software; you can redistribute
* it and/or modify it under the terms of the GNU General
* Public License version 2 as published by the Free Software
* Foundation.
*
* This program is distributed in the hope that it will be
* useful, but WITHOUT ANY WARRANTY; without even the implied
* warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
* PURPOSE. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public
* License along with this program; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place,
* Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/kernel.h>

View File

@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
obj-y += kernel/
obj-y += mm/

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB100 SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/include/ "abilis_tb10x.dtsi"

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB100 Development Kit PCB device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/dts-v1/;

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB101 SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/include/ "abilis_tb10x.dtsi"

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB101 Development Kit PCB device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/dts-v1/;

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB10X SOC device tree
*
* Copyright (C) Abilis Systems 2013
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
/dts-v1/;

View File

@ -11,7 +11,6 @@
*/
/dts-v1/;
#include <dt-bindings/net/ti-dp83867.h>
#include <dt-bindings/reset/snps,hsdk-reset.h>
/ {
@ -167,6 +166,24 @@
#clock-cells = <0>;
};
gpu_core_clk: gpu-core-clk {
compatible = "fixed-clock";
clock-frequency = <400000000>;
#clock-cells = <0>;
};
gpu_dma_clk: gpu-dma-clk {
compatible = "fixed-clock";
clock-frequency = <400000000>;
#clock-cells = <0>;
};
gpu_cfg_clk: gpu-cfg-clk {
compatible = "fixed-clock";
clock-frequency = <200000000>;
#clock-cells = <0>;
};
dmac_core_clk: dmac-core-clk {
compatible = "fixed-clock";
clock-frequency = <400000000>;
@ -187,6 +204,7 @@
interrupt-names = "macirq";
phy-mode = "rgmii";
snps,pbl = <32>;
snps,multicast-filter-bins = <256>;
clocks = <&gmacclk>;
clock-names = "stmmaceth";
phy-handle = <&phy0>;
@ -195,15 +213,15 @@
mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
dma-coherent;
tx-fifo-depth = <4096>;
rx-fifo-depth = <4096>;
mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dwmac-mdio";
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
};
@ -237,6 +255,14 @@
dma-coherent;
};
creg_gpio: gpio@14b0 {
compatible = "snps,creg-gpio-hsdk";
reg = <0x14b0 0x4>;
gpio-controller;
#gpio-cells = <2>;
ngpios = <2>;
};
gpio: gpio@3000 {
compatible = "snps,dw-apb-gpio";
reg = <0x3000 0x20>;
@ -252,6 +278,17 @@
};
};
gpu_3d: gpu@90000 {
compatible = "vivante,gc";
reg = <0x90000 0x4000>;
clocks = <&gpu_dma_clk>,
<&gpu_cfg_clk>,
<&gpu_core_clk>,
<&gpu_core_clk>;
clock-names = "bus", "reg", "core", "shader";
interrupts = <28>;
};
dmac: dmac@80000 {
compatible = "snps,axi-dma-1.01a";
reg = <0x80000 0x400>;

View File

@ -49,10 +49,12 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
CONFIG_GPIO_SNPS_CREG=y
# CONFIG_HWMON is not set
CONFIG_DRM=y
# CONFIG_DRM_FBDEV_EMULATION is not set
CONFIG_DRM_UDL=y
CONFIG_DRM_ETNAVIV=y
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_USB_EHCI_HCD=y
@ -64,7 +66,6 @@ CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_DW=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_EXT3_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y

View File

@ -92,8 +92,11 @@ __cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
#endif /* CONFIG_ARC_HAS_LLSC */
#define cmpxchg(ptr, o, n) ((typeof(*(ptr)))__cmpxchg((ptr), \
(unsigned long)(o), (unsigned long)(n)))
#define cmpxchg(ptr, o, n) ({ \
(typeof(*(ptr)))__cmpxchg((ptr), \
(unsigned long)(o), \
(unsigned long)(n)); \
})
/*
* atomic_cmpxchg is same as cmpxchg
@ -198,8 +201,11 @@ static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
return __xchg_bad_pointer();
}
#define xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
sizeof(*(ptr))))
#define xchg(ptr, with) ({ \
(typeof(*(ptr)))__xchg((unsigned long)(with), \
(ptr), \
sizeof(*(ptr))); \
})
#endif /* CONFIG_ARC_PLAT_EZNPS */

View File

@ -1 +1,2 @@
# SPDX-License-Identifier: GPL-2.0
generic-y += ucontext.h

View File

@ -1,8 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
*/
#include <linux/ptrace.h>

View File

@ -66,7 +66,7 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
struct vm_area_struct *vma = NULL;
struct task_struct *tsk = current;
struct mm_struct *mm = tsk->mm;
int si_code = 0;
int si_code = SEGV_MAPERR;
int ret;
vm_fault_t fault;
int write = regs->ecr_cause & ECR_C_PROTV_STORE; /* ST/EX */
@ -81,16 +81,14 @@ void do_page_fault(unsigned long address, struct pt_regs *regs)
* only copy the information from the master page table,
* nothing more.
*/
if (address >= VMALLOC_START) {
if (address >= VMALLOC_START && !user_mode(regs)) {
ret = handle_kernel_vaddr_fault(address);
if (unlikely(ret))
goto bad_area_nosemaphore;
goto no_context;
else
return;
}
si_code = SEGV_MAPERR;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
@ -198,7 +196,6 @@ good_area:
bad_area:
up_read(&mm->mmap_sem);
bad_area_nosemaphore:
/* User mode accesses just cause a SIGSEGV */
if (user_mode(regs)) {
tsk->thread.fault_address = address;

View File

@ -911,9 +911,11 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
struct pt_regs *regs)
{
struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
unsigned int pd0[mmu->ways];
unsigned long flags;
int set;
int set, n_ways = mmu->ways;
n_ways = min(n_ways, 4);
BUG_ON(mmu->ways > 4);
local_irq_save(flags);
@ -921,9 +923,10 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
for (set = 0; set < mmu->sets; set++) {
int is_valid, way;
unsigned int pd0[4];
/* read out all the ways of current set */
for (way = 0, is_valid = 0; way < mmu->ways; way++) {
for (way = 0, is_valid = 0; way < n_ways; way++) {
write_aux_reg(ARC_REG_TLBINDEX,
SET_WAY_TO_IDX(mmu, set, way));
write_aux_reg(ARC_REG_TLBCOMMAND, TLBRead);
@ -937,14 +940,14 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
continue;
/* Scan the set for duplicate ways: needs a nested loop */
for (way = 0; way < mmu->ways - 1; way++) {
for (way = 0; way < n_ways - 1; way++) {
int n;
if (!pd0[way])
continue;
for (n = way + 1; n < mmu->ways; n++) {
for (n = way + 1; n < n_ways; n++) {
if (pd0[way] != pd0[n])
continue;

View File

@ -1,17 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* AXS101/AXS103 Software Development Platform
*
* Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/of_fdt.h>

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#include <linux/sched.h>

View File

@ -1,19 +1,9 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*******************************************************************************
EZNPS CPU startup Code
Copyright(c) 2012 EZchip Technologies.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
*******************************************************************************/
#include <linux/linkage.h>

View File

@ -1,17 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#ifndef _PLAT_EZNPS_CTOP_H

View File

@ -1,17 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#ifndef _PLAT_EZNPS_MTM_H

View File

@ -1,17 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#ifndef __PLAT_EZNPS_SMP_H

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#include <linux/smp.h>

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#include <linux/init.h>

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright(c) 2015 EZchip Technologies.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* The full GNU General Public License is included in this distribution in
* the file called "COPYING".
*/
#include <linux/smp.h>

View File

@ -1,19 +1,8 @@
# SPDX-License-Identifier: GPL-2.0-only
# Abilis Systems TB10x platform kernel configuration file
#
# Author: Christian Ruppert <christian.ruppert@abilis.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
menuconfig ARC_PLAT_TB10X

View File

@ -1,19 +1,8 @@
# SPDX-License-Identifier: GPL-2.0-only
# Abilis Systems TB10x platform Makefile
#
# Author: Christian Ruppert <christian.ruppert@abilis.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2 as
# published by the Free Software Foundation.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
KBUILD_CFLAGS += -Iarch/arc/plat-tb10x/include

View File

@ -1,22 +1,10 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Abilis Systems TB10x platform initialisation
*
* Copyright (C) Abilis Systems 2012
*
* Author: Christian Ruppert <christian.ruppert@abilis.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>

View File

@ -32,6 +32,7 @@
extern char * strstr(const char * s1, const char *s2);
extern size_t strlen(const char *s);
extern int memcmp(const void *cs, const void *ct, size_t count);
extern char * strchrnul(const char *, int);
#ifdef CONFIG_KERNEL_GZIP
#include "../../../../lib/decompress_inflate.c"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* animeo_ip.dts - Device Tree file for Somfy Animeo IP Boards
*
* Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 only.
*/
/dts-v1/;

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91-qil_a9260.dts - Device Tree file for Calao QIL A9260 board
*
* Copyright (C) 2011-2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9260.dtsi"

View File

@ -1,12 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "sama5d4.dtsi"

View File

@ -1,12 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2015 Marek Vasut <marex@denx.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91rm9200ek.dts - Device Tree file for Atmel AT91RM9200 evaluation kit
*
* Copyright (C) 2012 Joachim Eastwood <manabian@gmail.com>
*
* Licensed under GPLv2 only
*/
/dts-v1/;
#include "at91rm9200.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9261.dtsi - Device Tree Include file for AT91SAM9261 SoC
*
* Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
*
* Licensed under GPLv2 only.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9261ek.dts - Device Tree file for Atmel at91sam9261 reference board
*
* Copyright (C) 2013 Jean-Jacques Hiblot <jjhiblot@traphandler.com>
*
* Licensed under GPLv2 only.
*/
/dts-v1/;
#include "at91sam9261.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 only.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9263ek.dts - Device Tree file for Atmel at91sam9263 reference board
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2 only
*/
/dts-v1/;
#include "at91sam9263.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g15.dtsi - Device Tree Include file for AT91SAM9G15 SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9x5.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g20.dtsi - Device Tree Include file for AT91SAM9G20 family SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9260.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g20ek.dts - Device Tree file for Atmel at91sam9g20ek board
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9g20ek_common.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g20ek_2mmc.dts - Device Tree file for Atmel at91sam9g20ek 2 MMC board
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9g20ek_common.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g20ek_common.dtsi - Device Tree file for Atmel at91sam9g20ek board
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9g20.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g25.dtsi - Device Tree Include file for AT91SAM9G25 SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9x5.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9g35.dtsi - Device Tree Include file for AT91SAM9G35 SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9x5.dtsi"

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9rlek.dts - Device Tree file for Atmel at91sam9rl reference board
*
* Copyright (C) 2014 Microchip
* Alexandre Belloni <alexandre.belloni@free-electrons.com>
*
* Licensed under GPLv2 only
*/
/dts-v1/;
#include "at91sam9rl.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x25.dtsi - Device Tree Include file for AT91SAM9X25 SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9x5.dtsi"

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x35.dtsi - Device Tree Include file for AT91SAM9X35 SoC
*
* Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
*
* Licensed under GPLv2.
*/
#include "at91sam9x5.dtsi"

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
* Ethernet interface.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_isi.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
* Image Sensor Interface.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_lcd.dtsi - Device Tree Include file for AT91SAM9x5 SoC with an
* LCD controller.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
* Ethernet interface.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_macb1.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 2
* Ethernet interfaces.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,10 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* at91sam9x5_usart3.dtsi - Device Tree Include file for AT91SAM9x5 SoC with
* 4 USART.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
*
* Licensed under GPLv2.
*/
#include <dt-bindings/pinctrl/at91.h>

View File

@ -1,12 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/boot/dts/axm5516-amarillo.dts
*
* Copyright (C) 2013 LSI
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/dts-v1/;

View File

@ -1,12 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/boot/dts/axm5516-cpus.dtsi
*
* Copyright (C) 2013 LSI
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
/ {

View File

@ -1,12 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* arch/arm/boot/dts/axm55xx.dtsi
*
* Copyright (C) 2013 LSI
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>

View File

@ -1,11 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2014 Linaro Limited
* Author: Matt Porter <mporter@linaro.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
&pmu {

View File

@ -1,13 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Device Tree for AM1808 EnBW CMC board
*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
#include "da850.dtsi"

View File

@ -1,11 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device Tree for DA850 EVM board
*
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*/
/dts-v1/;
#include "da850.dtsi"

View File

@ -1,7 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2016 BayLibre, Inc.
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "da850.dtsi"

View File

@ -1,11 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Device tree for LEGO MINDSTORMS EV3
*
* Copyright (C) 2017 David Lechner <david@lechnology.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation, version 2.
*/
/dts-v1/;

View File

@ -1,11 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <dt-bindings/interrupt-controller/irq.h>

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/ {

View File

@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* ethernut5.dts - Device Tree file for Ethernut 5 board
*
* Copyright (C) 2012 egnite GmbH <info@egnite.de>
*
* Licensed under GPLv2.
*/
/dts-v1/;
#include "at91sam9xe.dtsi"

View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2012-2013 Linaro Ltd.
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
/dts-v1/;

View File

@ -1,3 +1,4 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Hisilicon Ltd. Hi3620 SoC
*
@ -5,10 +6,6 @@
* Copyright (C) 2012-2013 Linaro Ltd.
*
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <dt-bindings/clock/hi3620-clock.h>

View File

@ -1,17 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2011-2012 Calxeda, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
/dts-v1/;

View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013-2014 Linaro Ltd.
* Author: Haojian Zhuang <haojian.zhuang@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
/dts-v1/;

View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
* Copyright (c) 2013-2014 Hisilicon Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
/dts-v1/;

View File

@ -1,10 +1,7 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (c) 2013-2014 Linaro Ltd.
* Copyright (c) 2013-2014 Hisilicon Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* publishhed by the Free Software Foundation.
*/
#include <dt-bindings/clock/hix5hd2-clock.h>

View File

@ -1,12 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;

View File

@ -1,12 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
/dts-v1/;

Some files were not shown because too many files have changed in this diff Show More