Merge branch 'misc' into for-linus

This commit is contained in:
James Bottomley 2016-12-22 12:32:33 -08:00
commit 3eff4c7828
14 changed files with 285 additions and 167 deletions

View File

@ -6,17 +6,15 @@ NCR53c400 extensions (c) 1994,1995,1996 Kevin Lentin
This file documents the NCR53c400 extensions by Kevin Lentin and some
enhancements to the NCR5380 core.
This driver supports both NCR5380 and NCR53c400 cards in port or memory
mapped modes. Currently this driver can only support one of those mapping
modes at a time but it does support both of these chips at the same time.
The next release of this driver will support port & memory mapped cards at
the same time. It should be able to handle multiple different cards in the
same machine.
This driver supports NCR5380 and NCR53c400 and compatible cards in port or
memory mapped modes.
The drivers/scsi/Makefile has an override in it for the most common
NCR53c400 card, the Trantor T130B in its default configuration:
Port: 0x350
IRQ : 5
Use of an interrupt is recommended, if supported by the board, as this will
allow targets to disconnect and thereby improve SCSI bus utilization.
If the irq parameter is 254 or is omitted entirely, the driver will probe
for the correct IRQ line automatically. If the irq parameter is 0 or 255
then no IRQ will be used.
The NCR53c400 does not support DMA but it does have Pseudo-DMA which is
supported by the driver.
@ -47,22 +45,24 @@ These old-style parameters can support only one card:
dtc_3181e=1 to set up for a Domex Technology Corp 3181E board
hp_c2502=1 to set up for a Hewlett Packard C2502 board
e.g.
OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1
NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0
for a port mapped NCR5380 board or
E.g. Trantor T130B in its default configuration:
modprobe g_NCR5380 irq=5 base=0x350 card=1
or alternatively, using the old syntax,
modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_53c400=1
OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1
for a memory mapped NCR53C400 board with interrupts disabled or
E.g. a port mapped NCR5380 board, driver to probe for IRQ:
modprobe g_NCR5380 base=0x350 card=0
or alternatively,
modprobe g_NCR5380 ncr_addr=0x350 ncr_5380=1
NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ
and HP C2502 at 0x300 with IRQ 7
(255 should be specified for no or DMA interrupt, 254 to autoprobe for an
IRQ line if overridden on the command line.)
E.g. a memory mapped NCR53C400 board with no IRQ:
modprobe g_NCR5380 irq=255 base=0xc8000 card=1
or alternatively,
modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1
E.g. two cards, DTC3181 (in non-PnP mode) at 0x240 with no IRQ
and HP C2502 at 0x300 with IRQ 7:
modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4
Kevin Lentin
K.Lentin@cs.monash.edu.au

View File

@ -97,9 +97,6 @@
* and macros and include this file in your driver.
*
* These macros control options :
* AUTOPROBE_IRQ - if defined, the NCR5380_probe_irq() function will be
* defined.
*
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
@ -127,9 +124,7 @@
* NCR5380_dma_residual - residual byte count
*
* The generic driver is initialized by calling NCR5380_init(instance),
* after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
* possible) function may be used.
* after setting the appropriate host specific fields and ID.
*/
#ifndef NCR5380_io_delay
@ -351,76 +346,6 @@ static void NCR5380_print_phase(struct Scsi_Host *instance)
}
#endif
static int probe_irq;
/**
* probe_intr - helper for IRQ autoprobe
* @irq: interrupt number
* @dev_id: unused
* @regs: unused
*
* Set a flag to indicate the IRQ in question was received. This is
* used by the IRQ probe code.
*/
static irqreturn_t probe_intr(int irq, void *dev_id)
{
probe_irq = irq;
return IRQ_HANDLED;
}
/**
* NCR5380_probe_irq - find the IRQ of an NCR5380
* @instance: NCR5380 controller
* @possible: bitmask of ISA IRQ lines
*
* Autoprobe for the IRQ line used by the NCR5380 by triggering an IRQ
* and then looking to see what interrupt actually turned up.
*/
static int __maybe_unused NCR5380_probe_irq(struct Scsi_Host *instance,
int possible)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
unsigned long timeout;
int trying_irqs, i, mask;
for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
trying_irqs |= mask;
timeout = jiffies + msecs_to_jiffies(250);
probe_irq = NO_IRQ;
/*
* A interrupt is triggered whenever BSY = false, SEL = true
* and a bit set in the SELECT_ENABLE_REG is asserted on the
* SCSI bus.
*
* Note that the bus is only driven when the phase control signals
* (I/O, C/D, and MSG) match those in the TCR, so we must reset that
* to zero.
*/
NCR5380_write(TARGET_COMMAND_REG, 0);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if (trying_irqs & mask)
free_irq(i, NULL);
return probe_irq;
}
/**
* NCR58380_info - report driver and host information
* @instance: relevant scsi host instance

View File

@ -199,16 +199,6 @@
#define PHASE_SR_TO_TCR(phase) ((phase) >> 2)
/*
* These are "special" values for the irq and dma_channel fields of the
* Scsi_Host structure
*/
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
#ifndef NO_IRQ
#define NO_IRQ 0
#endif
@ -290,7 +280,6 @@ static void NCR5380_print(struct Scsi_Host *instance);
#define NCR5380_dprint_phase(flg, arg) do {} while (0)
#endif
static int NCR5380_probe_irq(struct Scsi_Host *instance, int possible);
static int NCR5380_init(struct Scsi_Host *instance, int flags);
static int NCR5380_maybe_reset_bus(struct Scsi_Host *);
static void NCR5380_exit(struct Scsi_Host *instance);

View File

@ -160,7 +160,6 @@ static const struct pci_device_id aac_pci_tbl[] = {
{ 0x9005, 0x028b, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 62 }, /* Adaptec PMC Series 6 (Tupelo) */
{ 0x9005, 0x028c, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 63 }, /* Adaptec PMC Series 7 (Denali) */
{ 0x9005, 0x028d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 64 }, /* Adaptec PMC Series 8 */
{ 0x9005, 0x028f, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 65 }, /* Adaptec PMC Series 9 */
{ 0,}
};
MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
@ -239,7 +238,6 @@ static struct aac_driver_ident aac_drivers[] = {
{ aac_src_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 6 (Tupelo) */
{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 7 (Denali) */
{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC }, /* Adaptec PMC Series 8 */
{ aac_srcv_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_SRC } /* Adaptec PMC Series 9 */
};
/**

View File

@ -37,7 +37,7 @@
#define MAX_CARDS 8
/* old-style parameters for compatibility */
static int ncr_irq;
static int ncr_irq = -1;
static int ncr_addr;
static int ncr_5380;
static int ncr_53c400;
@ -52,9 +52,9 @@ module_param(ncr_53c400a, int, 0);
module_param(dtc_3181e, int, 0);
module_param(hp_c2502, int, 0);
static int irq[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
static int irq[] = { -1, -1, -1, -1, -1, -1, -1, -1 };
module_param_array(irq, int, NULL, 0);
MODULE_PARM_DESC(irq, "IRQ number(s)");
MODULE_PARM_DESC(irq, "IRQ number(s) (0=none, 254=auto [default])");
static int base[] = { 0, 0, 0, 0, 0, 0, 0, 0 };
module_param_array(base, int, NULL, 0);
@ -67,6 +67,56 @@ MODULE_PARM_DESC(card, "card type (0=NCR5380, 1=NCR53C400, 2=NCR53C400A, 3=DTC31
MODULE_ALIAS("g_NCR5380_mmio");
MODULE_LICENSE("GPL");
static void g_NCR5380_trigger_irq(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
/*
* An interrupt is triggered whenever BSY = false, SEL = true
* and a bit set in the SELECT_ENABLE_REG is asserted on the
* SCSI bus.
*
* Note that the bus is only driven when the phase control signals
* (I/O, C/D, and MSG) match those in the TCR.
*/
NCR5380_write(TARGET_COMMAND_REG,
PHASE_SR_TO_TCR(NCR5380_read(STATUS_REG) & PHASE_MASK));
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG,
ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
msleep(1);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(TARGET_COMMAND_REG, 0);
}
/**
* g_NCR5380_probe_irq - find the IRQ of a NCR5380 or equivalent
* @instance: SCSI host instance
*
* Autoprobe for the IRQ line used by the card by triggering an IRQ
* and then looking to see what interrupt actually turned up.
*/
static int g_NCR5380_probe_irq(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata = shost_priv(instance);
int irq_mask, irq;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
irq_mask = probe_irq_on();
g_NCR5380_trigger_irq(instance);
irq = probe_irq_off(irq_mask);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
if (irq <= 0)
return NO_IRQ;
return irq;
}
/*
* Configure I/O address of 53C400A or DTC436 by writing magic numbers
* to ports 0x779 and 0x379.
@ -81,14 +131,33 @@ static void magic_configure(int idx, u8 irq, u8 magic[])
outb(magic[3], 0x379);
outb(magic[4], 0x379);
/* allowed IRQs for HP C2502 */
if (irq != 2 && irq != 3 && irq != 4 && irq != 5 && irq != 7)
irq = 0;
if (irq == 9)
irq = 2;
if (idx >= 0 && idx <= 7)
cfg = 0x80 | idx | (irq << 4);
outb(cfg, 0x379);
}
static irqreturn_t legacy_empty_irq_handler(int irq, void *dev_id)
{
return IRQ_HANDLED;
}
static int legacy_find_free_irq(int *irq_table)
{
while (*irq_table != -1) {
if (!request_irq(*irq_table, legacy_empty_irq_handler,
IRQF_PROBE_SHARED, "Test IRQ",
(void *)irq_table)) {
free_irq(*irq_table, (void *) irq_table);
return *irq_table;
}
irq_table++;
}
return -1;
}
static unsigned int ncr_53c400a_ports[] = {
0x280, 0x290, 0x300, 0x310, 0x330, 0x340, 0x348, 0x350, 0
};
@ -101,6 +170,9 @@ static u8 ncr_53c400a_magic[] = { /* 53C400A & DTC436 */
static u8 hp_c2502_magic[] = { /* HP C2502 */
0x0f, 0x22, 0xf0, 0x20, 0x80
};
static int hp_c2502_irqs[] = {
9, 5, 7, 3, 4, -1
};
static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
struct device *pdev, int base, int irq, int board)
@ -248,6 +320,13 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
}
}
/* Check for vacant slot */
NCR5380_write(MODE_REG, 0);
if (NCR5380_read(MODE_REG) != 0) {
ret = -ENODEV;
goto out_unregister;
}
ret = NCR5380_init(instance, flags | FLAG_LATE_DMA_SETUP);
if (ret)
goto out_unregister;
@ -262,29 +341,57 @@ static int generic_NCR5380_init_one(struct scsi_host_template *tpnt,
NCR5380_maybe_reset_bus(instance);
if (irq != IRQ_AUTO)
instance->irq = irq;
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);
/* Compatibility with documented NCR5380 kernel parameters */
if (instance->irq == 255)
instance->irq = NO_IRQ;
if (irq == 255 || irq == 0)
irq = NO_IRQ;
else if (irq == -1)
irq = IRQ_AUTO;
if (instance->irq != NO_IRQ) {
/* set IRQ for HP C2502 */
if (board == BOARD_HP_C2502)
magic_configure(port_idx, instance->irq, magic);
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
instance->irq = NO_IRQ;
if (board == BOARD_HP_C2502) {
int *irq_table = hp_c2502_irqs;
int board_irq = -1;
switch (irq) {
case NO_IRQ:
board_irq = 0;
break;
case IRQ_AUTO:
board_irq = legacy_find_free_irq(irq_table);
break;
default:
while (*irq_table != -1)
if (*irq_table++ == irq)
board_irq = irq;
}
if (board_irq <= 0) {
board_irq = 0;
irq = NO_IRQ;
}
magic_configure(port_idx, board_irq, magic);
}
if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
if (irq == IRQ_AUTO) {
instance->irq = g_NCR5380_probe_irq(instance);
if (instance->irq == NO_IRQ)
shost_printk(KERN_INFO, instance, "no irq detected\n");
} else {
instance->irq = irq;
if (instance->irq == NO_IRQ)
shost_printk(KERN_INFO, instance, "no irq provided\n");
}
if (instance->irq != NO_IRQ) {
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
instance->irq = NO_IRQ;
shost_printk(KERN_INFO, instance,
"irq %d denied\n", instance->irq);
} else {
shost_printk(KERN_INFO, instance,
"irq %d acquired\n", instance->irq);
}
}
ret = scsi_add_host(instance, pdev);
@ -597,7 +704,7 @@ static int __init generic_NCR5380_init(void)
int ret = 0;
/* compatibility with old-style parameters */
if (irq[0] == 0 && base[0] == 0 && card[0] == -1) {
if (irq[0] == -1 && base[0] == 0 && card[0] == -1) {
irq[0] = ncr_irq;
base[0] = ncr_addr;
if (ncr_5380)

View File

@ -51,4 +51,6 @@
#define BOARD_DTC3181E 3
#define BOARD_HP_C2502 4
#define IRQ_AUTO 254
#endif /* GENERIC_NCR5380_H */

View File

@ -95,6 +95,7 @@ static int fast_fail = 1;
static int client_reserve = 1;
static char partition_name[97] = "UNKNOWN";
static unsigned int partition_number = -1;
static LIST_HEAD(ibmvscsi_head);
static struct scsi_transport_template *ibmvscsi_transport_template;
@ -232,6 +233,7 @@ static void ibmvscsi_task(void *data)
while ((crq = crq_queue_next_crq(&hostdata->queue)) != NULL) {
ibmvscsi_handle_crq(crq, hostdata);
crq->valid = VIOSRP_CRQ_FREE;
wmb();
}
vio_enable_interrupts(vdev);
@ -240,6 +242,7 @@ static void ibmvscsi_task(void *data)
vio_disable_interrupts(vdev);
ibmvscsi_handle_crq(crq, hostdata);
crq->valid = VIOSRP_CRQ_FREE;
wmb();
} else {
done = 1;
}
@ -992,7 +995,7 @@ static void handle_cmd_rsp(struct srp_event_struct *evt_struct)
if (unlikely(rsp->opcode != SRP_RSP)) {
if (printk_ratelimit())
dev_warn(evt_struct->hostdata->dev,
"bad SRP RSP type %d\n", rsp->opcode);
"bad SRP RSP type %#02x\n", rsp->opcode);
}
if (cmnd) {
@ -2270,6 +2273,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
}
dev_set_drvdata(&vdev->dev, hostdata);
list_add_tail(&hostdata->host_list, &ibmvscsi_head);
return 0;
add_srp_port_failed:
@ -2291,6 +2295,7 @@ static int ibmvscsi_probe(struct vio_dev *vdev, const struct vio_device_id *id)
static int ibmvscsi_remove(struct vio_dev *vdev)
{
struct ibmvscsi_host_data *hostdata = dev_get_drvdata(&vdev->dev);
list_del(&hostdata->host_list);
unmap_persist_bufs(hostdata);
release_event_pool(&hostdata->pool, hostdata);
ibmvscsi_release_crq_queue(&hostdata->queue, hostdata,

View File

@ -90,6 +90,7 @@ struct event_pool {
/* all driver data associated with a host adapter */
struct ibmvscsi_host_data {
struct list_head host_list;
atomic_t request_limit;
int client_migrated;
int reset_crq;

View File

@ -23,6 +23,7 @@
#include "unipro.h"
#include "ufs-qcom.h"
#include "ufshci.h"
#include "ufs_quirks.h"
#define UFS_QCOM_DEFAULT_DBG_PRINT_EN \
(UFS_QCOM_DBG_PRINT_REGS_EN | UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
@ -1031,6 +1032,34 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba,
return ret;
}
static int ufs_qcom_quirk_host_pa_saveconfigtime(struct ufs_hba *hba)
{
int err;
u32 pa_vs_config_reg1;
err = ufshcd_dme_get(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
&pa_vs_config_reg1);
if (err)
goto out;
/* Allow extension of MSB bits of PA_SaveConfigTime attribute */
err = ufshcd_dme_set(hba, UIC_ARG_MIB(PA_VS_CONFIG_REG1),
(pa_vs_config_reg1 | (1 << 12)));
out:
return err;
}
static int ufs_qcom_apply_dev_quirks(struct ufs_hba *hba)
{
int err = 0;
if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME)
err = ufs_qcom_quirk_host_pa_saveconfigtime(hba);
return err;
}
static u32 ufs_qcom_get_ufs_hci_version(struct ufs_hba *hba)
{
struct ufs_qcom_host *host = ufshcd_get_variant(hba);
@ -1194,7 +1223,16 @@ static int ufs_qcom_init(struct ufs_hba *hba)
*/
host->generic_phy = devm_phy_get(dev, "ufsphy");
if (IS_ERR(host->generic_phy)) {
if (host->generic_phy == ERR_PTR(-EPROBE_DEFER)) {
/*
* UFS driver might be probed before the phy driver does.
* In that case we would like to return EPROBE_DEFER code.
*/
err = -EPROBE_DEFER;
dev_warn(dev, "%s: required phy device. hasn't probed yet. err = %d\n",
__func__, err);
goto out_variant_clear;
} else if (IS_ERR(host->generic_phy)) {
err = PTR_ERR(host->generic_phy);
dev_err(dev, "%s: PHY get failed %d\n", __func__, err);
goto out_variant_clear;
@ -1432,7 +1470,8 @@ static void ufs_qcom_print_hw_debug_reg_all(struct ufs_hba *hba,
reg = ufs_qcom_get_debug_reg_offset(host, UFS_UFS_DBG_RD_PRDT_RAM);
print_fn(hba, reg, 64, "UFS_UFS_DBG_RD_PRDT_RAM ", priv);
ufshcd_writel(hba, (reg & ~UFS_BIT(17)), REG_UFS_CFG1);
/* clear bit 17 - UTP_DBG_RAMS_EN */
ufshcd_rmwl(hba, UFS_BIT(17), 0, REG_UFS_CFG1);
reg = ufs_qcom_get_debug_reg_offset(host, UFS_DBG_RD_REG_UAWM);
print_fn(hba, reg, 4, "UFS_DBG_RD_REG_UAWM ", priv);
@ -1609,6 +1648,7 @@ static struct ufs_hba_variant_ops ufs_hba_qcom_vops = {
.hce_enable_notify = ufs_qcom_hce_enable_notify,
.link_startup_notify = ufs_qcom_link_startup_notify,
.pwr_change_notify = ufs_qcom_pwr_change_notify,
.apply_dev_quirks = ufs_qcom_apply_dev_quirks,
.suspend = ufs_qcom_suspend,
.resume = ufs_qcom_resume,
.dbg_register_dump = ufs_qcom_dump_dbg_regs,

View File

@ -142,6 +142,7 @@ enum ufs_qcom_phy_init_type {
UFS_QCOM_DBG_PRINT_TEST_BUS_EN)
/* QUniPro Vendor specific attributes */
#define PA_VS_CONFIG_REG1 0x9000
#define DME_VS_CORE_CLK_CTRL 0xD002
/* bit and mask definitions for DME_VS_CORE_CLK_CTRL attribute */
#define DME_VS_CORE_CLK_CTRL_CORE_CLK_DIV_EN_BIT BIT(8)

View File

@ -134,29 +134,17 @@ struct ufs_dev_fix {
*/
#define UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE (1 << 7)
/*
* The max. value PA_SaveConfigTime is 250 (10us) but this is not enough for
* some vendors.
* Gear switch from PWM to HS may fail even with this max. PA_SaveConfigTime.
* Gear switch can be issued by host controller as an error recovery and any
* software delay will not help on this case so we need to increase
* PA_SaveConfigTime to >32us as per vendor recommendation.
*/
#define UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME (1 << 8)
struct ufs_hba;
void ufs_advertise_fixup_device(struct ufs_hba *hba);
static struct ufs_dev_fix ufs_fixups[] = {
/* UFS cards deviations table */
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_NO_FASTAUTO),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
UFS_DEVICE_QUIRK_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
UFS_DEVICE_QUIRK_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
END_FIX
};
#endif /* UFS_QUIRKS_H_ */

View File

@ -185,6 +185,30 @@ ufs_get_pm_lvl_to_link_pwr_state(enum ufs_pm_level lvl)
return ufs_pm_lvl_states[lvl].link_state;
}
static struct ufs_dev_fix ufs_fixups[] = {
/* UFS cards deviations table */
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_RECOVERY_FROM_DL_NAC_ERRORS),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_NO_FASTAUTO),
UFS_FIX(UFS_VENDOR_SAMSUNG, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_TOSHIBA, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_DELAY_BEFORE_LPM),
UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9C8KBADG",
UFS_DEVICE_QUIRK_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_TOSHIBA, "THGLF2G9D8KBADG",
UFS_DEVICE_QUIRK_PA_TACTIVATE),
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL, UFS_DEVICE_NO_VCCQ),
UFS_FIX(UFS_VENDOR_SKHYNIX, UFS_ANY_MODEL,
UFS_DEVICE_QUIRK_HOST_PA_SAVECONFIGTIME),
END_FIX
};
static void ufshcd_tmc_handler(struct ufs_hba *hba);
static void ufshcd_async_scan(void *data, async_cookie_t cookie);
static int ufshcd_reset_and_restore(struct ufs_hba *hba);
@ -288,10 +312,24 @@ int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask,
*/
static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba)
{
if (hba->ufs_version == UFSHCI_VERSION_10)
return INTERRUPT_MASK_ALL_VER_10;
else
return INTERRUPT_MASK_ALL_VER_11;
u32 intr_mask = 0;
switch (hba->ufs_version) {
case UFSHCI_VERSION_10:
intr_mask = INTERRUPT_MASK_ALL_VER_10;
break;
/* allow fall through */
case UFSHCI_VERSION_11:
case UFSHCI_VERSION_20:
intr_mask = INTERRUPT_MASK_ALL_VER_11;
break;
/* allow fall through */
case UFSHCI_VERSION_21:
default:
intr_mask = INTERRUPT_MASK_ALL_VER_21;
}
return intr_mask;
}
/**
@ -5199,6 +5237,8 @@ static void ufshcd_tune_unipro_params(struct ufs_hba *hba)
if (hba->dev_quirks & UFS_DEVICE_QUIRK_HOST_PA_TACTIVATE)
ufshcd_quirk_tune_host_pa_tactivate(hba);
ufshcd_vops_apply_dev_quirks(hba);
}
/**
@ -6667,6 +6707,13 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
/* Get UFS version supported by the controller */
hba->ufs_version = ufshcd_get_ufs_version(hba);
if ((hba->ufs_version != UFSHCI_VERSION_10) &&
(hba->ufs_version != UFSHCI_VERSION_11) &&
(hba->ufs_version != UFSHCI_VERSION_20) &&
(hba->ufs_version != UFSHCI_VERSION_21))
dev_err(hba->dev, "invalid UFS version 0x%x\n",
hba->ufs_version);
/* Get Interrupt bit mask per version */
hba->intr_mask = ufshcd_get_intr_mask(hba);

View File

@ -266,7 +266,7 @@ struct ufs_pwr_mode_info {
* @setup_task_mgmt: called before any task management request is issued
* to set some things
* @hibern8_notify: called around hibern8 enter/exit
* to configure some things
* @apply_dev_quirks: called to apply device specific quirks
* @suspend: called during host controller PM callback
* @resume: called during host controller PM callback
* @dbg_register_dump: used to dump controller debug information
@ -293,7 +293,8 @@ struct ufs_hba_variant_ops {
void (*setup_xfer_req)(struct ufs_hba *, int, bool);
void (*setup_task_mgmt)(struct ufs_hba *, int, u8);
void (*hibern8_notify)(struct ufs_hba *, enum uic_cmd_dme,
enum ufs_notify_change_status);
enum ufs_notify_change_status);
int (*apply_dev_quirks)(struct ufs_hba *);
int (*suspend)(struct ufs_hba *, enum ufs_pm_op);
int (*resume)(struct ufs_hba *, enum ufs_pm_op);
void (*dbg_register_dump)(struct ufs_hba *hba);
@ -839,6 +840,13 @@ static inline void ufshcd_vops_hibern8_notify(struct ufs_hba *hba,
return hba->vops->hibern8_notify(hba, cmd, status);
}
static inline int ufshcd_vops_apply_dev_quirks(struct ufs_hba *hba)
{
if (hba->vops && hba->vops->apply_dev_quirks)
return hba->vops->apply_dev_quirks(hba);
return 0;
}
static inline int ufshcd_vops_suspend(struct ufs_hba *hba, enum ufs_pm_op op)
{
if (hba->vops && hba->vops->suspend)

View File

@ -72,6 +72,10 @@ enum {
REG_UIC_COMMAND_ARG_1 = 0x94,
REG_UIC_COMMAND_ARG_2 = 0x98,
REG_UIC_COMMAND_ARG_3 = 0x9C,
REG_UFS_CCAP = 0x100,
REG_UFS_CRYPTOCAP = 0x104,
UFSHCI_CRYPTO_REG_SPACE_SIZE = 0x400,
};
/* Controller capability masks */
@ -275,6 +279,9 @@ enum {
/* Interrupt disable mask for UFSHCI v1.1 */
INTERRUPT_MASK_ALL_VER_11 = 0x31FFF,
/* Interrupt disable mask for UFSHCI v2.1 */
INTERRUPT_MASK_ALL_VER_21 = 0x71FFF,
};
/*