brain-hackers_pepepper-mirror
/
linux-brain
mirror of https://github.com/brain-hackers/linux-brain.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity

net: hns3: adjust the process of PF reset 

When doing PF reset, the driver needs to do some preparatory work
before asserting PF reset. Since when hardware is resetting, it
is necessary to stop tx/rx queue, clear hardware table, etc,
otherwise hardware may run into unrecoverable state if there is
still IO running when the hardware is resetting.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Huazhong Tan 2018-11-07 12:06:15 +08:00 committed by David S. Miller
parent 0742ed7c24
commit 35d93a3004
1 changed files with 36 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c
View File

@ -2396,7 +2396,6 @@ static void hclge_do_reset(struct hclge_dev *hdev)
break;
case HNAE3_FUNC_RESET:
dev_info(&pdev->dev, "PF Reset requested\n");
hclge_func_reset_cmd(hdev, 0);
/* schedule again to check later */
set_bit(HNAE3_FUNC_RESET, &hdev->reset_pending);
hclge_reset_task_schedule(hdev);
@ -2462,6 +2461,35 @@ static void hclge_clear_reset_cause(struct hclge_dev *hdev)
hclge_enable_vector(&hdev->misc_vector, true);
}
static int hclge_reset_prepare_wait(struct hclge_dev *hdev)
{
int ret = 0;
switch (hdev->reset_type) {
case HNAE3_FUNC_RESET:
ret = hclge_func_reset_cmd(hdev, 0);
if (ret) {
dev_err(&hdev->pdev->dev,
"assertting function reset fail %d!\n", ret);
return ret;
}
/* After performaning pf reset, it is not necessary to do the
* mailbox handling or send any command to firmware, because
* any mailbox handling or command to firmware is only valid
* after hclge_cmd_init is called.
*/
set_bit(HCLGE_STATE_CMD_DISABLE, &hdev->state);
break;
default:
break;
}
dev_info(&hdev->pdev->dev, "prepare wait ok\n");
return ret;
}
static void hclge_reset(struct hclge_dev *hdev)
{
struct hnae3_ae_dev *ae_dev = pci_get_drvdata(hdev->pdev);
@ -2477,6 +2505,8 @@ static void hclge_reset(struct hclge_dev *hdev)
hclge_notify_client(hdev, HNAE3_DOWN_CLIENT);
rtnl_unlock();
hclge_reset_prepare_wait(hdev);
if (!hclge_reset_wait(hdev)) {
rtnl_lock();
hclge_notify_client(hdev, HNAE3_UNINIT_CLIENT);
@ -4873,7 +4903,11 @@ static void hclge_ae_stop(struct hnae3_handle *handle)
cancel_work_sync(&hdev->service_task);
clear_bit(HCLGE_STATE_SERVICE_SCHED, &hdev->state);
if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) {
/* If it is not PF reset, the firmware will disable the MAC,
* so it only need to stop phy here.
*/
if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) &&
hdev->reset_type != HNAE3_FUNC_RESET) {
hclge_mac_stop_phy(hdev);
return;
}