leds: support new LP8501 device - another LP55xx common

LP8501 can drive up to 9 channels like LP5523.
LEDs can be controlled directly via the I2C and programmable engines are
supported.

LP55xx common driver
 LP8501 is one of LP55xx family device, so LP55xx common code are used.
 Chip specific data is defined in the structure, 'lp55xx_device_config'.

Differences between LP8501 and LP5523
 Different register layout for LED output control and others.
 LP8501 specific feature for separate output power selection.
 LP8501 doesn't support external clock detection.
 Different programming engine data.

LP8501 specific feature - output power selection
 Output channels are selected by power selection - Vout or Vdd.
 Separate power for VDD1-6 and VDD7-9 are available.
 It is configurable in the platform data.
 To support this feature, LP55xx DT structure and header are changed.
 Device tree binding is updated as well.

LED pattern data
 Example pattern data is updated in the driver documentation.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
This commit is contained in:
Kim, Milo 2013-07-09 02:11:37 -07:00 committed by Bryan Wu
parent 81d2287809
commit 33b3a561f4
7 changed files with 537 additions and 7 deletions

View File

@ -1,7 +1,7 @@
Binding for TI/National Semiconductor LP55xx Led Drivers
Required properties:
- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562"
- compatible: "national,lp5521" or "national,lp5523" or "ti,lp5562" or "ti,lp8501"
- reg: I2C slave address
- clock-mode: Input clock mode, (0: automode, 1: internal, 2: external)
@ -11,6 +11,11 @@ Each child has own specific current settings
Optional properties:
- label: Used for naming LEDs
- pwr-sel: LP8501 specific property. Power selection for output channels.
0: D1~9 are connected to VDD
1: D1~6 with VDD, D7~9 with VOUT
2: D1~6 with VOUT, D7~9 with VDD
3: D1~9 are connected to VOUT
Alternatively, each child can have specific channel name
- chan-name: Name of each channel name
@ -145,3 +150,68 @@ lp5562@30 {
max-cur = /bits/ 8 <0x60>;
};
};
example 4) LP8501
9 channels are defined. The 'pwr-sel' is LP8501 specific property.
Others are same as LP5523.
lp8501@32 {
compatible = "ti,lp8501";
reg = <0x32>;
clock-mode = /bits/ 8 <2>;
pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
chan0 {
chan-name = "d1";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan1 {
chan-name = "d2";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan2 {
chan-name = "d3";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan3 {
chan-name = "d4";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan4 {
chan-name = "d5";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan5 {
chan-name = "d6";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan6 {
chan-name = "d7";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan7 {
chan-name = "d8";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
chan8 {
chan-name = "d9";
led-cur = /bits/ 8 <0x14>;
max-cur = /bits/ 8 <0x20>;
};
};

View File

@ -1,11 +1,11 @@
LP5521/LP5523/LP55231 Common Driver
===================================
LP5521/LP5523/LP55231/LP5562/LP8501 Common Driver
=================================================
Authors: Milo(Woogyom) Kim <milo.kim@ti.com>
Description
-----------
LP5521, LP5523/55231 and LP5562 have common features as below.
LP5521, LP5523/55231, LP5562 and LP8501 have common features as below.
Register access via the I2C
Device initialization/deinitialization
@ -109,6 +109,30 @@ As soon as 'loading' is set to 0, registered callback is called.
Inside the callback, the selected engine is loaded and memory is updated.
To run programmed pattern, 'run_engine' attribute should be enabled.
The pattern sqeuence of LP8501 is same as LP5523.
However pattern data is specific.
Ex 1) Engine 1 is used
echo 1 > /sys/bus/i2c/devices/xxxx/select_engine
echo 1 > /sys/class/firmware/lp8501/loading
echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
echo 0 > /sys/class/firmware/lp8501/loading
echo 1 > /sys/bus/i2c/devices/xxxx/run_engine
Ex 2) Engine 2 and 3 are used at the same time
echo 2 > /sys/bus/i2c/devices/xxxx/select_engine
sleep 1
echo 1 > /sys/class/firmware/lp8501/loading
echo "9d0140ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
echo 0 > /sys/class/firmware/lp8501/loading
sleep 1
echo 3 > /sys/bus/i2c/devices/xxxx/select_engine
sleep 1
echo 1 > /sys/class/firmware/lp8501/loading
echo "9d0340ff7e0040007e00a001c000" > /sys/class/firmware/lp8501/data
echo 0 > /sys/class/firmware/lp8501/loading
sleep 1
echo 1 > /sys/class/leds/d1/device/run_engine
( 'run_engine' and 'firmware_cb' )
The sequence of running the program data is common.
But each device has own specific register addresses for commands.

View File

@ -194,11 +194,11 @@ config LEDS_LP3944
module will be called leds-lp3944.
config LEDS_LP55XX_COMMON
tristate "Common Driver for TI/National LP5521, LP5523/55231 and LP5562"
depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562
tristate "Common Driver for TI/National LP5521/5523/55231/5562/8501"
depends on LEDS_LP5521 || LEDS_LP5523 || LEDS_LP5562 || LEDS_LP8501
select FW_LOADER
help
This option supports common operations for LP5521 and LP5523/55231
This option supports common operations for LP5521/5523/55231/5562/8501
devices.
config LEDS_LP5521
@ -232,6 +232,18 @@ config LEDS_LP5562
Driver provides direct control via LED class and interface for
programming the engines.
config LEDS_LP8501
tristate "LED Support for TI LP8501 LED driver chip"
depends on LEDS_CLASS && I2C
select LEDS_LP55XX_COMMON
help
If you say yes here you get support for TI LP8501 LED driver.
It is 9 channel chip with programmable engines.
Driver provides direct control via LED class and interface for
programming the engines.
It is similar as LP5523, but output power selection is available.
And register layout and engine program schemes are different.
config LEDS_LP8788
tristate "LED support for the TI LP8788 PMIC"
depends on LEDS_CLASS

View File

@ -27,6 +27,7 @@ obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_LP5562) += leds-lp5562.o
obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o

View File

@ -593,6 +593,9 @@ int lp55xx_of_populate_pdata(struct device *dev, struct device_node *np)
of_property_read_string(np, "label", &pdata->label);
of_property_read_u8(np, "clock-mode", &pdata->clock_mode);
/* LP8501 specific */
of_property_read_u8(np, "pwr-sel", (u8 *)&pdata->pwr_sel);
dev->platform_data = pdata;
return 0;

410
drivers/leds/leds-lp8501.c Normal file
View File

@ -0,0 +1,410 @@
/*
* TI LP8501 9 channel LED Driver
*
* Copyright (C) 2013 Texas Instruments
*
* Author: Milo(Woogyom) Kim <milo.kim@ti.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
#include <linux/delay.h>
#include <linux/firmware.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_data/leds-lp55xx.h>
#include <linux/slab.h>
#include "leds-lp55xx-common.h"
#define LP8501_PROGRAM_LENGTH 32
#define LP8501_MAX_LEDS 9
/* Registers */
#define LP8501_REG_ENABLE 0x00
#define LP8501_ENABLE BIT(6)
#define LP8501_EXEC_M 0x3F
#define LP8501_EXEC_ENG1_M 0x30
#define LP8501_EXEC_ENG2_M 0x0C
#define LP8501_EXEC_ENG3_M 0x03
#define LP8501_RUN_ENG1 0x20
#define LP8501_RUN_ENG2 0x08
#define LP8501_RUN_ENG3 0x02
#define LP8501_REG_OP_MODE 0x01
#define LP8501_MODE_ENG1_M 0x30
#define LP8501_MODE_ENG2_M 0x0C
#define LP8501_MODE_ENG3_M 0x03
#define LP8501_LOAD_ENG1 0x10
#define LP8501_LOAD_ENG2 0x04
#define LP8501_LOAD_ENG3 0x01
#define LP8501_REG_PWR_CONFIG 0x05
#define LP8501_PWR_CONFIG_M 0x03
#define LP8501_REG_LED_PWM_BASE 0x16
#define LP8501_REG_LED_CURRENT_BASE 0x26
#define LP8501_REG_CONFIG 0x36
#define LP8501_PWM_PSAVE BIT(7)
#define LP8501_AUTO_INC BIT(6)
#define LP8501_PWR_SAVE BIT(5)
#define LP8501_CP_AUTO 0x18
#define LP8501_INT_CLK BIT(0)
#define LP8501_DEFAULT_CFG \
(LP8501_PWM_PSAVE | LP8501_AUTO_INC | LP8501_PWR_SAVE | LP8501_CP_AUTO)
#define LP8501_REG_RESET 0x3D
#define LP8501_RESET 0xFF
#define LP8501_REG_PROG_PAGE_SEL 0x4F
#define LP8501_PAGE_ENG1 0
#define LP8501_PAGE_ENG2 1
#define LP8501_PAGE_ENG3 2
#define LP8501_REG_PROG_MEM 0x50
#define LP8501_ENG1_IS_LOADING(mode) \
((mode & LP8501_MODE_ENG1_M) == LP8501_LOAD_ENG1)
#define LP8501_ENG2_IS_LOADING(mode) \
((mode & LP8501_MODE_ENG2_M) == LP8501_LOAD_ENG2)
#define LP8501_ENG3_IS_LOADING(mode) \
((mode & LP8501_MODE_ENG3_M) == LP8501_LOAD_ENG3)
static inline void lp8501_wait_opmode_done(void)
{
usleep_range(1000, 2000);
}
static void lp8501_set_led_current(struct lp55xx_led *led, u8 led_current)
{
led->led_current = led_current;
lp55xx_write(led->chip, LP8501_REG_LED_CURRENT_BASE + led->chan_nr,
led_current);
}
static int lp8501_post_init_device(struct lp55xx_chip *chip)
{
int ret;
u8 val = LP8501_DEFAULT_CFG;
ret = lp55xx_write(chip, LP8501_REG_ENABLE, LP8501_ENABLE);
if (ret)
return ret;
/* Chip startup time is 500 us, 1 - 2 ms gives some margin */
usleep_range(1000, 2000);
if (chip->pdata->clock_mode != LP55XX_CLOCK_EXT)
val |= LP8501_INT_CLK;
ret = lp55xx_write(chip, LP8501_REG_CONFIG, val);
if (ret)
return ret;
/* Power selection for each output */
return lp55xx_update_bits(chip, LP8501_REG_PWR_CONFIG,
LP8501_PWR_CONFIG_M, chip->pdata->pwr_sel);
}
static void lp8501_load_engine(struct lp55xx_chip *chip)
{
enum lp55xx_engine_index idx = chip->engine_idx;
u8 mask[] = {
[LP55XX_ENGINE_1] = LP8501_MODE_ENG1_M,
[LP55XX_ENGINE_2] = LP8501_MODE_ENG2_M,
[LP55XX_ENGINE_3] = LP8501_MODE_ENG3_M,
};
u8 val[] = {
[LP55XX_ENGINE_1] = LP8501_LOAD_ENG1,
[LP55XX_ENGINE_2] = LP8501_LOAD_ENG2,
[LP55XX_ENGINE_3] = LP8501_LOAD_ENG3,
};
u8 page_sel[] = {
[LP55XX_ENGINE_1] = LP8501_PAGE_ENG1,
[LP55XX_ENGINE_2] = LP8501_PAGE_ENG2,
[LP55XX_ENGINE_3] = LP8501_PAGE_ENG3,
};
lp55xx_update_bits(chip, LP8501_REG_OP_MODE, mask[idx], val[idx]);
lp8501_wait_opmode_done();
lp55xx_write(chip, LP8501_REG_PROG_PAGE_SEL, page_sel[idx]);
}
static void lp8501_stop_engine(struct lp55xx_chip *chip)
{
lp55xx_write(chip, LP8501_REG_OP_MODE, 0);
lp8501_wait_opmode_done();
}
static void lp8501_turn_off_channels(struct lp55xx_chip *chip)
{
int i;
for (i = 0; i < LP8501_MAX_LEDS; i++)
lp55xx_write(chip, LP8501_REG_LED_PWM_BASE + i, 0);
}
static void lp8501_run_engine(struct lp55xx_chip *chip, bool start)
{
int ret;
u8 mode;
u8 exec;
/* stop engine */
if (!start) {
lp8501_stop_engine(chip);
lp8501_turn_off_channels(chip);
return;
}
/*
* To run the engine,
* operation mode and enable register should updated at the same time
*/
ret = lp55xx_read(chip, LP8501_REG_OP_MODE, &mode);
if (ret)
return;
ret = lp55xx_read(chip, LP8501_REG_ENABLE, &exec);
if (ret)
return;
/* change operation mode to RUN only when each engine is loading */
if (LP8501_ENG1_IS_LOADING(mode)) {
mode = (mode & ~LP8501_MODE_ENG1_M) | LP8501_RUN_ENG1;
exec = (exec & ~LP8501_EXEC_ENG1_M) | LP8501_RUN_ENG1;
}
if (LP8501_ENG2_IS_LOADING(mode)) {
mode = (mode & ~LP8501_MODE_ENG2_M) | LP8501_RUN_ENG2;
exec = (exec & ~LP8501_EXEC_ENG2_M) | LP8501_RUN_ENG2;
}
if (LP8501_ENG3_IS_LOADING(mode)) {
mode = (mode & ~LP8501_MODE_ENG3_M) | LP8501_RUN_ENG3;
exec = (exec & ~LP8501_EXEC_ENG3_M) | LP8501_RUN_ENG3;
}
lp55xx_write(chip, LP8501_REG_OP_MODE, mode);
lp8501_wait_opmode_done();
lp55xx_update_bits(chip, LP8501_REG_ENABLE, LP8501_EXEC_M, exec);
}
static int lp8501_update_program_memory(struct lp55xx_chip *chip,
const u8 *data, size_t size)
{
u8 pattern[LP8501_PROGRAM_LENGTH] = {0};
unsigned cmd;
char c[3];
int update_size;
int nrchars;
int offset = 0;
int ret;
int i;
/* clear program memory before updating */
for (i = 0; i < LP8501_PROGRAM_LENGTH; i++)
lp55xx_write(chip, LP8501_REG_PROG_MEM + i, 0);
i = 0;
while ((offset < size - 1) && (i < LP8501_PROGRAM_LENGTH)) {
/* separate sscanfs because length is working only for %s */
ret = sscanf(data + offset, "%2s%n ", c, &nrchars);
if (ret != 1)
goto err;
ret = sscanf(c, "%2x", &cmd);
if (ret != 1)
goto err;
pattern[i] = (u8)cmd;
offset += nrchars;
i++;
}
/* Each instruction is 16bit long. Check that length is even */
if (i % 2)
goto err;
update_size = i;
for (i = 0; i < update_size; i++)
lp55xx_write(chip, LP8501_REG_PROG_MEM + i, pattern[i]);
return 0;
err:
dev_err(&chip->cl->dev, "wrong pattern format\n");
return -EINVAL;
}
static void lp8501_firmware_loaded(struct lp55xx_chip *chip)
{
const struct firmware *fw = chip->fw;
if (fw->size > LP8501_PROGRAM_LENGTH) {
dev_err(&chip->cl->dev, "firmware data size overflow: %zu\n",
fw->size);
return;
}
/*
* Program momery sequence
* 1) set engine mode to "LOAD"
* 2) write firmware data into program memory
*/
lp8501_load_engine(chip);
lp8501_update_program_memory(chip, fw->data, fw->size);
}
static void lp8501_led_brightness_work(struct work_struct *work)
{
struct lp55xx_led *led = container_of(work, struct lp55xx_led,
brightness_work);
struct lp55xx_chip *chip = led->chip;
mutex_lock(&chip->lock);
lp55xx_write(chip, LP8501_REG_LED_PWM_BASE + led->chan_nr,
led->brightness);
mutex_unlock(&chip->lock);
}
/* Chip specific configurations */
static struct lp55xx_device_config lp8501_cfg = {
.reset = {
.addr = LP8501_REG_RESET,
.val = LP8501_RESET,
},
.enable = {
.addr = LP8501_REG_ENABLE,
.val = LP8501_ENABLE,
},
.max_channel = LP8501_MAX_LEDS,
.post_init_device = lp8501_post_init_device,
.brightness_work_fn = lp8501_led_brightness_work,
.set_led_current = lp8501_set_led_current,
.firmware_cb = lp8501_firmware_loaded,
.run_engine = lp8501_run_engine,
};
static int lp8501_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
int ret;
struct lp55xx_chip *chip;
struct lp55xx_led *led;
struct lp55xx_platform_data *pdata;
struct device_node *np = client->dev.of_node;
if (!client->dev.platform_data) {
if (np) {
ret = lp55xx_of_populate_pdata(&client->dev, np);
if (ret < 0)
return ret;
} else {
dev_err(&client->dev, "no platform data\n");
return -EINVAL;
}
}
pdata = client->dev.platform_data;
chip = devm_kzalloc(&client->dev, sizeof(*chip), GFP_KERNEL);
if (!chip)
return -ENOMEM;
led = devm_kzalloc(&client->dev,
sizeof(*led) * pdata->num_channels, GFP_KERNEL);
if (!led)
return -ENOMEM;
chip->cl = client;
chip->pdata = pdata;
chip->cfg = &lp8501_cfg;
mutex_init(&chip->lock);
i2c_set_clientdata(client, led);
ret = lp55xx_init_device(chip);
if (ret)
goto err_init;
dev_info(&client->dev, "%s Programmable led chip found\n", id->name);
ret = lp55xx_register_leds(led, chip);
if (ret)
goto err_register_leds;
ret = lp55xx_register_sysfs(chip);
if (ret) {
dev_err(&client->dev, "registering sysfs failed\n");
goto err_register_sysfs;
}
return 0;
err_register_sysfs:
lp55xx_unregister_leds(led, chip);
err_register_leds:
lp55xx_deinit_device(chip);
err_init:
return ret;
}
static int lp8501_remove(struct i2c_client *client)
{
struct lp55xx_led *led = i2c_get_clientdata(client);
struct lp55xx_chip *chip = led->chip;
lp8501_stop_engine(chip);
lp55xx_unregister_sysfs(chip);
lp55xx_unregister_leds(led, chip);
lp55xx_deinit_device(chip);
return 0;
}
static const struct i2c_device_id lp8501_id[] = {
{ "lp8501", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lp8501_id);
#ifdef CONFIG_OF
static const struct of_device_id of_lp8501_leds_match[] = {
{ .compatible = "ti,lp8501", },
{},
};
MODULE_DEVICE_TABLE(of, of_lp8501_leds_match);
#endif
static struct i2c_driver lp8501_driver = {
.driver = {
.name = "lp8501",
.of_match_table = of_match_ptr(of_lp8501_leds_match),
},
.probe = lp8501_probe,
.remove = lp8501_remove,
.id_table = lp8501_id,
};
module_i2c_driver(lp8501_driver);
MODULE_DESCRIPTION("Texas Instruments LP8501 LED drvier");
MODULE_AUTHOR("Milo Kim");
MODULE_LICENSE("GPL");

View File

@ -36,6 +36,13 @@ struct lp55xx_predef_pattern {
u8 size_b;
};
enum lp8501_pwr_sel {
LP8501_ALL_VDD, /* D1~9 are connected to VDD */
LP8501_6VDD_3VOUT, /* D1~6 with VDD, D7~9 with VOUT */
LP8501_3VDD_6VOUT, /* D1~6 with VOUT, D7~9 with VDD */
LP8501_ALL_VOUT, /* D1~9 are connected to VOUT */
};
/*
* struct lp55xx_platform_data
* @led_config : Configurable led class device
@ -67,6 +74,9 @@ struct lp55xx_platform_data {
/* Predefined pattern data */
struct lp55xx_predef_pattern *patterns;
unsigned int num_patterns;
/* LP8501 specific */
enum lp8501_pwr_sel pwr_sel;
};
#endif /* _LEDS_LP55XX_H */