phylib: Properly reinitialize PHYs after hibernation

Since hibernation assumes power loss, we should fully reinitialize
PHYs (including platform fixups), as if PHYs were just attached.

This patch factors phy_init_hw() out of phy_attach_direct(), then
converts mdio_bus to dev_pm_ops and adds an appropriate restore()
callback.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Anton Vorontsov 2009-12-30 08:23:30 +00:00 committed by David S. Miller
parent 541cd3ee00
commit 2f5cb43406
3 changed files with 59 additions and 22 deletions

View File

@ -264,6 +264,8 @@ static int mdio_bus_match(struct device *dev, struct device_driver *drv)
(phydev->phy_id & phydrv->phy_id_mask));
}
#ifdef CONFIG_PM
static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
{
struct device_driver *drv = phydev->dev.driver;
@ -295,10 +297,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
return true;
}
/* Suspend and resume. Copied from platform_suspend and
* platform_resume
*/
static int mdio_bus_suspend(struct device * dev, pm_message_t state)
static int mdio_bus_suspend(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
@ -318,7 +317,7 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state)
return phydrv->suspend(phydev);
}
static int mdio_bus_resume(struct device * dev)
static int mdio_bus_resume(struct device *dev)
{
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
@ -338,11 +337,48 @@ no_resume:
return 0;
}
static int mdio_bus_restore(struct device *dev)
{
struct phy_device *phydev = to_phy_device(dev);
struct net_device *netdev = phydev->attached_dev;
int ret;
if (!netdev)
return 0;
ret = phy_init_hw(phydev);
if (ret < 0)
return ret;
/* The PHY needs to renegotiate. */
phydev->link = 0;
phydev->state = PHY_UP;
phy_start_machine(phydev, NULL);
return 0;
}
static struct dev_pm_ops mdio_bus_pm_ops = {
.suspend = mdio_bus_suspend,
.resume = mdio_bus_resume,
.freeze = mdio_bus_suspend,
.thaw = mdio_bus_resume,
.restore = mdio_bus_restore,
};
#define MDIO_BUS_PM_OPS (&mdio_bus_pm_ops)
#else
#define MDIO_BUS_PM_OPS NULL
#endif /* CONFIG_PM */
struct bus_type mdio_bus_type = {
.name = "mdio_bus",
.match = mdio_bus_match,
.suspend = mdio_bus_suspend,
.resume = mdio_bus_resume,
.pm = MDIO_BUS_PM_OPS,
};
EXPORT_SYMBOL(mdio_bus_type);

View File

@ -378,6 +378,20 @@ void phy_disconnect(struct phy_device *phydev)
}
EXPORT_SYMBOL(phy_disconnect);
int phy_init_hw(struct phy_device *phydev)
{
int ret;
if (!phydev->drv || !phydev->drv->config_init)
return 0;
ret = phy_scan_fixups(phydev);
if (ret < 0)
return ret;
return phydev->drv->config_init(phydev);
}
/**
* phy_attach_direct - attach a network device to a given PHY device pointer
* @dev: network device to attach
@ -425,21 +439,7 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
/* Do initial configuration here, now that
* we have certain key parameters
* (dev_flags and interface) */
if (phydev->drv->config_init) {
int err;
err = phy_scan_fixups(phydev);
if (err < 0)
return err;
err = phydev->drv->config_init(phydev);
if (err < 0)
return err;
}
return 0;
return phy_init_hw(phydev);
}
EXPORT_SYMBOL(phy_attach_direct);

View File

@ -447,6 +447,7 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_device_register(struct phy_device *phy);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
int phy_init_hw(struct phy_device *phydev);
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
struct phy_device * phy_attach(struct net_device *dev,