gpio: Add a Gateworks PLD GPIO driver

This adds a driver for Gateworks PLD GPIO, that exist in
two instances on the Gateworks Cambria GW2358-4 router
platform at least.

Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This commit is contained in:
Linus Walleij 2019-02-01 21:41:31 +01:00
parent 35b21b6ef8
commit 2a0b0a57fa
3 changed files with 145 additions and 0 deletions

View File

@ -831,6 +831,13 @@ config GPIO_ADNP
enough to represent all pins, but the driver will assume a
register layout for 64 pins (8 registers).
config GPIO_GW_PLD
tristate "Gateworks PLD GPIO Expander"
depends on OF_GPIO
help
Say yes here to provide access to the Gateworks I2C PLD GPIO
Expander. This is used at least on the Cambria GW2358-4.
config GPIO_MAX7300
tristate "Maxim MAX7300 GPIO expander"
select GPIO_MAX730X

View File

@ -55,6 +55,7 @@ obj-$(CONFIG_GPIO_FTGPIO010) += gpio-ftgpio010.o
obj-$(CONFIG_GPIO_GE_FPGA) += gpio-ge.o
obj-$(CONFIG_GPIO_GPIO_MM) += gpio-gpio-mm.o
obj-$(CONFIG_GPIO_GRGPIO) += gpio-grgpio.o
obj-$(CONFIG_GPIO_GW_PLD) += gpio-gw-pld.o
obj-$(CONFIG_GPIO_HLWD) += gpio-hlwd.o
obj-$(CONFIG_HTC_EGPIO) += gpio-htc-egpio.o
obj-$(CONFIG_GPIO_ICH) += gpio-ich.o

137
drivers/gpio/gpio-gw-pld.c Normal file
View File

@ -0,0 +1,137 @@
// SPDX-License-Identifier: GPL-2.0+
//
// Gateworks I2C PLD GPIO expander
//
// Copyright (C) 2019 Linus Walleij <linus.walleij@linaro.org>
//
// Based on code and know-how from the OpenWrt driver:
// Copyright (C) 2009 Gateworks Corporation
// Authors: Chris Lang, Imre Kaloz
#include <linux/bits.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
#include <linux/module.h>
/**
* struct gw_pld - State container for Gateworks PLD
* @chip: GPIO chip instance
* @client: I2C client
* @out: shadow register for the output bute
*/
struct gw_pld {
struct gpio_chip chip;
struct i2c_client *client;
u8 out;
};
/*
* The Gateworks I2C PLD chip only expose one read and one write register.
* Writing a "one" bit (to match the reset state) lets that pin be used as an
* input. It is an open-drain model.
*/
static int gw_pld_input8(struct gpio_chip *gc, unsigned offset)
{
struct gw_pld *gw = gpiochip_get_data(gc);
gw->out |= BIT(offset);
return i2c_smbus_write_byte(gw->client, gw->out);
}
static int gw_pld_get8(struct gpio_chip *gc, unsigned offset)
{
struct gw_pld *gw = gpiochip_get_data(gc);
s32 val;
val = i2c_smbus_read_byte(gw->client);
return (val < 0) ? 0 : !!(val & BIT(offset));
}
static int gw_pld_output8(struct gpio_chip *gc, unsigned offset, int value)
{
struct gw_pld *gw = gpiochip_get_data(gc);
if (value)
gw->out |= BIT(offset);
else
gw->out &= ~BIT(offset);
return i2c_smbus_write_byte(gw->client, gw->out);
}
static void gw_pld_set8(struct gpio_chip *gc, unsigned offset, int value)
{
gw_pld_output8(gc, offset, value);
}
static int gw_pld_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct device_node *np = dev->of_node;
struct gw_pld *gw;
int ret;
gw = devm_kzalloc(dev, sizeof(*gw), GFP_KERNEL);
if (!gw)
return -ENOMEM;
gw->chip.base = -1;
gw->chip.can_sleep = true;
gw->chip.parent = dev;
gw->chip.of_node = np;
gw->chip.owner = THIS_MODULE;
gw->chip.label = dev_name(dev);
gw->chip.ngpio = 8;
gw->chip.direction_input = gw_pld_input8;
gw->chip.get = gw_pld_get8;
gw->chip.direction_output = gw_pld_output8;
gw->chip.set = gw_pld_set8;
gw->client = client;
/*
* The Gateworks I2C PLD chip does not properly send the acknowledge
* bit at all times, but we can still use the standard i2c_smbus
* functions by simply ignoring this bit.
*/
client->flags |= I2C_M_IGNORE_NAK;
gw->out = 0xFF;
i2c_set_clientdata(client, gw);
ret = devm_gpiochip_add_data(dev, &gw->chip, gw);
if (ret)
return ret;
dev_info(dev, "registered Gateworks PLD GPIO device\n");
return 0;
}
static const struct i2c_device_id gw_pld_id[] = {
{ "gw-pld", },
{ }
};
MODULE_DEVICE_TABLE(i2c, gw_pld_id);
static const struct of_device_id gw_pld_dt_ids[] = {
{ .compatible = "gateworks,pld-gpio", },
{ },
};
MODULE_DEVICE_TABLE(of, gw_pld_dt_ids);
static struct i2c_driver gw_pld_driver = {
.driver = {
.name = "gw_pld",
.of_match_table = gw_pld_dt_ids,
},
.probe = gw_pld_probe,
.id_table = gw_pld_id,
};
module_i2c_driver(gw_pld_driver);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");