scsi: u14-34f: remove from tree

The driver has not seen any maintainer activity or other work that
wasn't tree wide conversion or clenaups in the entire history of
the git tree.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinicke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Documentation/scsi/scsi-parameters.txt

@@ -123,8 +123,5 @@ parameters may be changed at runtime by the command
 			See comment before function dc390_setup() in
 			drivers/scsi/tmscsim.c.
 
-	u14-34f=	[HW,SCSI] UltraStor 14F/34F SCSI host adapter
-			See header of drivers/scsi/u14-34f.c.
-
 	wd33c93=	[HW,SCSI]
 			See header of drivers/scsi/wd33c93.c.

MAINTAINERS

@@ -11967,12 +11967,6 @@ S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h
 
-U14-34F SCSI DRIVER
-M:	Dario Ballabio <ballabio_dario@emc.com>
-L:	linux-scsi@vger.kernel.org
-S:	Maintained
-F:	drivers/scsi/u14-34f.c
-
 UBI FILE SYSTEM (UBIFS)
 M:	Richard Weinberger <richard@nod.at>
 M:	Artem Bityutskiy <dedekind1@gmail.com>

drivers/scsi/Kconfig

@@ -1376,55 +1376,6 @@ config SCSI_T128
 	  To compile this driver as a module, choose M here: the
 	  module will be called t128.
 
-config SCSI_U14_34F
-	tristate "UltraStor 14F/34F support"
-	depends on ISA && SCSI && ISA_DMA_API
-	---help---
-	  This is support for the UltraStor 14F and 34F SCSI-2 host adapters.
-	  The source at <file:drivers/scsi/u14-34f.c> contains some
-	  information about this hardware.  If the driver doesn't work out of
-	  the box, you may have to change some settings in
-	  <file: drivers/scsi/u14-34f.c>.  Read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.  Note that there is also
-	  another driver for the same hardware: "UltraStor SCSI support",
-	  below.  You should say Y to both only if you want 24F support as
-	  well.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called u14-34f.
-
-config SCSI_U14_34F_TAGGED_QUEUE
-	bool "enable tagged command queueing"
-	depends on SCSI_U14_34F
-	help
-	  This is a feature of SCSI-2 which improves performance: the host
-	  adapter can send several SCSI commands to a device's queue even if
-	  previous commands haven't finished yet.
-	  This is equivalent to the "u14-34f=tc:y" boot option.
-
-config SCSI_U14_34F_LINKED_COMMANDS
-	bool "enable elevator sorting"
-	depends on SCSI_U14_34F
-	help
-	  This option enables elevator sorting for all probed SCSI disks and
-	  CD-ROMs. It definitely reduces the average seek distance when doing
-	  random seeks, but this does not necessarily result in a noticeable
-	  performance improvement: your mileage may vary...
-	  This is equivalent to the "u14-34f=lc:y" boot option.
-
-config SCSI_U14_34F_MAX_TAGS
-	int "maximum number of queued commands"
-	depends on SCSI_U14_34F
-	default "8"
-	help
-	  This specifies how many SCSI commands can be maximally queued for
-	  each probed SCSI device. You should reduce the default value of 8
-	  only if you have disks with buggy or limited tagged command support.
-	  Minimum is 2 and maximum is 14. This value is also the window size
-	  used by the elevator sorting option above. The effective value used
-	  by the driver for each probed SCSI device is reported at boot time.
-	  This is equivalent to the "u14-34f=mq:8" boot option.
-
 config SCSI_NSP32
 	tristate "Workbit NinjaSCSI-32Bi/UDE support"
 	depends on PCI && SCSI && !64BIT

drivers/scsi/Makefile

@@ -61,7 +61,6 @@ obj-$(CONFIG_SCSI_SIM710)	+= 53c700.o	sim710.o
 obj-$(CONFIG_SCSI_ADVANSYS)	+= advansys.o
 obj-$(CONFIG_SCSI_BUSLOGIC)	+= BusLogic.o
 obj-$(CONFIG_SCSI_DPT_I2O)	+= dpt_i2o.o
-obj-$(CONFIG_SCSI_U14_34F)	+= u14-34f.o
 obj-$(CONFIG_SCSI_ARCMSR)	+= arcmsr/
 obj-$(CONFIG_SCSI_AHA152X)	+= aha152x.o
 obj-$(CONFIG_SCSI_AHA1542)	+= aha1542.o