docs: hwmon: pmbus files: convert to ReST format

Convert pmbus files to ReST format, in order to allow them to
be parsed by Sphinx.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This commit is contained in:
Mauro Carvalho Chehab 2019-04-17 06:46:26 -03:00 committed by Guenter Roeck
parent 0d9256262f
commit 1f234ff162
17 changed files with 736 additions and 279 deletions

View File

@ -2,29 +2,53 @@ Kernel driver adm1275
=====================
Supported chips:
* Analog Devices ADM1075
Prefix: 'adm1075'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1075.pdf
* Analog Devices ADM1272
Prefix: 'adm1272'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1272.pdf
* Analog Devices ADM1275
Prefix: 'adm1275'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1275.pdf
* Analog Devices ADM1276
Prefix: 'adm1276'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
* Analog Devices ADM1278
Prefix: 'adm1278'
Addresses scanned: -
Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1278.pdf
* Analog Devices ADM1293/ADM1294
Prefix: 'adm1293', 'adm1294'
Addresses scanned: -
Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -75,6 +99,7 @@ Sysfs entries
The following attributes are supported. Limits are read-write, history reset
attributes are write-only, all other attributes are read-only.
======================= =======================================================
inX_label "vin1" or "vout1" depending on chip variant and
configuration. On ADM1075, ADM1293, and ADM1294,
vout1 reports the voltage on the VAUX pin.
@ -120,3 +145,4 @@ temp1_reset_history Write any value to reset history.
Temperature attributes are supported on ADM1272 and
ADM1278.
======================= =======================================================

View File

@ -2,6 +2,7 @@ Kernel driver ibm-cffps
=======================
Supported chips:
* IBM Common Form Factor power supply
Author: Eddie James <eajames@us.ibm.com>
@ -24,6 +25,7 @@ Sysfs entries
The following attributes are supported:
======================= ======================================================
curr1_alarm Output current over-current alarm.
curr1_input Measured output current in mA.
curr1_label "iout1"
@ -52,3 +54,4 @@ temp2_alarm Secondary rectifier temp over-temperature alarm.
temp2_input Measured secondary rectifier temp in millidegrees C.
temp3_alarm ORing FET temperature over-temperature alarm.
temp3_input Measured ORing FET temperature in millidegrees C.
======================= ======================================================

View File

@ -3,8 +3,11 @@ Kernel driver ir35221
Supported chips:
* Infineon IR35221
Prefix: 'ir35221'
Addresses scanned: -
Datasheet: Datasheet is not publicly available.
Author: Samuel Mendoza-Jonas <sam@mendozajonas.com>
@ -23,15 +26,16 @@ This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an IR35221
at address 0x70 on I2C bus #4:
at address 0x70 on I2C bus #4::
# modprobe ir35221
# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
# modprobe ir35221
# echo ir35221 0x70 > /sys/bus/i2c/devices/i2c-4/new_device
Sysfs attributes
----------------
======================= =======================================================
curr1_label "iin"
curr1_input Measured input current
curr1_max Maximum current
@ -85,3 +89,4 @@ temp[1-2]_highest Highest temperature
temp[1-2]_lowest Lowest temperature
temp[1-2]_max Maximum temperature
temp[1-2]_max_alarm Chip temperature high alarm
======================= =======================================================

View File

@ -2,34 +2,62 @@ Kernel driver lm25066
=====================
Supported chips:
* TI LM25056
Prefix: 'lm25056'
Addresses scanned: -
Datasheets:
http://www.ti.com/lit/gpn/lm25056
http://www.ti.com/lit/gpn/lm25056a
* National Semiconductor LM25066
Prefix: 'lm25066'
Addresses scanned: -
Datasheets:
http://www.national.com/pf/LM/LM25066.html
http://www.national.com/pf/LM/LM25066A.html
* National Semiconductor LM5064
Prefix: 'lm5064'
Addresses scanned: -
Datasheet:
http://www.national.com/pf/LM/LM5064.html
* National Semiconductor LM5066
Prefix: 'lm5066'
Addresses scanned: -
Datasheet:
http://www.national.com/pf/LM/LM5066.html
* Texas Instruments LM5066I
Prefix: 'lm5066i'
Addresses scanned: -
Datasheet:
http://www.ti.com/product/LM5066I
Author: Guenter Roeck <linux@roeck-us.net>
@ -64,6 +92,7 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= =======================================================
in1_label "vin"
in1_input Measured input voltage.
in1_average Average measured input voltage.
@ -105,3 +134,4 @@ temp1_max Maximum temperature.
temp1_crit Critical high temperature.
temp1_max_alarm Chip temperature high alarm.
temp1_crit_alarm Chip temperature critical high alarm.
======================= =======================================================

View File

@ -2,85 +2,143 @@ Kernel driver ltc2978
=====================
Supported chips:
* Linear Technology LTC2974
Prefix: 'ltc2974'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2974
* Linear Technology LTC2975
Prefix: 'ltc2975'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2975
* Linear Technology LTC2977
Prefix: 'ltc2977'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2977
* Linear Technology LTC2978, LTC2978A
Prefix: 'ltc2978'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2978
http://www.linear.com/product/ltc2978a
http://www.linear.com/product/ltc2978a
* Linear Technology LTC2980
Prefix: 'ltc2980'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc2980
* Linear Technology LTC3880
Prefix: 'ltc3880'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3880
* Linear Technology LTC3882
Prefix: 'ltc3882'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3882
* Linear Technology LTC3883
Prefix: 'ltc3883'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3883
* Linear Technology LTC3886
Prefix: 'ltc3886'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3886
* Linear Technology LTC3887
Prefix: 'ltc3887'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3887
* Linear Technology LTM2987
Prefix: 'ltm2987'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm2987
* Linear Technology LTM4675
Prefix: 'ltm4675'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm4675
* Linear Technology LTM4676
Prefix: 'ltm4676'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltm4676
* Analog Devices LTM4686
Prefix: 'ltm4686'
Addresses scanned: -
Datasheet: http://www.analog.com/ltm4686
Author: Guenter Roeck <linux@roeck-us.net>
Description
-----------
LTC2974 and LTC2975 are quad digital power supply managers.
LTC2978 is an octal power supply monitor.
LTC2977 is a pin compatible replacement for LTC2978.
LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
in a single die. The chip is instantiated and reported as two separate chips
on two different I2C bus addresses.
LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
DC/DC controllers.
LTC3883 is a single phase step-down DC/DC controller.
LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
additional components on a single die. The chip is instantiated and reported
as two separate chips on two different I2C bus addresses.
LTM4675 is a dual 9A or single 18A μModule regulator
LTM4676 is a dual 13A or single 26A uModule regulator.
LTM4686 is a dual 10A or single 20A uModule regulator.
- LTC2974 and LTC2975 are quad digital power supply managers.
- LTC2978 is an octal power supply monitor.
- LTC2977 is a pin compatible replacement for LTC2978.
- LTC2980 is a 16-channel Power System Manager, consisting of two LTC2977
- in a single die. The chip is instantiated and reported as two separate chips
- on two different I2C bus addresses.
- LTC3880, LTC3882, LTC3886, and LTC3887 are dual output poly-phase step-down
- DC/DC controllers.
- LTC3883 is a single phase step-down DC/DC controller.
- LTM2987 is a 16-channel Power System Manager with two LTC2977 plus
- additional components on a single die. The chip is instantiated and reported
- as two separate chips on two different I2C bus addresses.
- LTM4675 is a dual 9A or single 18A μModule regulator
- LTM4676 is a dual 13A or single 26A uModule regulator.
- LTM4686 is a dual 10A or single 20A uModule regulator.
Usage Notes
@ -90,127 +148,208 @@ This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an LTC2978 at address
0x60 on I2C bus #1:
0x60 on I2C bus #1::
# modprobe ltc2978
# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
# modprobe ltc2978
# echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs attributes
----------------
======================= ========================================================
in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
in1_max Maximum input voltage.
LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
LTM2987 only.
in1_lcrit Critical minimum input voltage.
LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
LTM2987 only.
in1_crit Critical maximum input voltage.
in1_min_alarm Input voltage low alarm.
in1_max_alarm Input voltage high alarm.
LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
LTM2987 only.
in1_lcrit_alarm Input voltage critical low alarm.
LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
LTM2987 only.
in1_crit_alarm Input voltage critical high alarm.
in1_lowest Lowest input voltage.
LTC2974, LTC2975, LTC2977, LTC2980, LTC2978, and
LTM2987 only.
in1_highest Highest input voltage.
in1_reset_history Reset input voltage history.
in[N]_label "vout[1-8]".
LTC2974, LTC2975: N=2-5
LTC2977, LTC2980, LTM2987: N=2-9
LTC2978: N=2-9
LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
N=2-3
LTC3883: N=2
- LTC2974, LTC2975: N=2-5
- LTC2977, LTC2980, LTM2987: N=2-9
- LTC2978: N=2-9
- LTC3880, LTC3882, LTC23886 LTC3887, LTM4675, LTM4676:
N=2-3
- LTC3883: N=2
in[N]_input Measured output voltage.
in[N]_min Minimum output voltage.
in[N]_max Maximum output voltage.
in[N]_lcrit Critical minimum output voltage.
in[N]_crit Critical maximum output voltage.
in[N]_min_alarm Output voltage low alarm.
in[N]_max_alarm Output voltage high alarm.
in[N]_lcrit_alarm Output voltage critical low alarm.
in[N]_crit_alarm Output voltage critical high alarm.
in[N]_lowest Lowest output voltage. LTC2974, LTC2975,
and LTC2978 only.
in[N]_lowest Lowest output voltage.
LTC2974, LTC2975,and LTC2978 only.
in[N]_highest Highest output voltage.
in[N]_reset_history Reset output voltage history.
temp[N]_input Measured temperature.
On LTC2974 and LTC2975, temp[1-4] report external
temperatures, and temp5 reports the chip temperature.
On LTC2977, LTC2980, LTC2978, and LTM2987, only one
temperature measurement is supported and reports
the chip temperature.
On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
temp1 and temp2 report external temperatures, and temp3
reports the chip temperature.
On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
temp[N]_min Mimimum temperature. LTC2974, LCT2977, LTM2980, LTC2978,
and LTM2987 only.
- On LTC2974 and LTC2975, temp[1-4] report external
temperatures, and temp5 reports the chip temperature.
- On LTC2977, LTC2980, LTC2978, and LTM2987, only one
temperature measurement is supported and reports
the chip temperature.
- On LTC3880, LTC3882, LTC3887, LTM4675, and LTM4676,
temp1 and temp2 report external temperatures, and
temp3 reports the chip temperature.
- On LTC3883, temp1 reports an external temperature,
and temp2 reports the chip temperature.
temp[N]_min Mimimum temperature.
LTC2974, LCT2977, LTM2980, LTC2978, and LTM2987 only.
temp[N]_max Maximum temperature.
temp[N]_lcrit Critical low temperature.
temp[N]_crit Critical high temperature.
temp[N]_min_alarm Temperature low alarm.
LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
LTM2987 only.
temp[N]_max_alarm Temperature high alarm.
temp[N]_lcrit_alarm Temperature critical low alarm.
temp[N]_crit_alarm Temperature critical high alarm.
temp[N]_lowest Lowest measured temperature.
LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
LTM2987 only.
Not supported for chip temperature sensor on LTC2974 and
LTC2975.
temp[N]_highest Highest measured temperature. Not supported for chip
temperature sensor on LTC2974 and LTC2975.
temp[N]_reset_history Reset temperature history. Not supported for chip
temperature sensor on LTC2974 and LTC2975.
- LTC2974, LTC2975, LTC2977, LTM2980, LTC2978, and
LTM2987 only.
- Not supported for chip temperature sensor on LTC2974
and LTC2975.
temp[N]_highest Highest measured temperature.
Not supported for chip temperature sensor on
LTC2974 and LTC2975.
temp[N]_reset_history Reset temperature history.
Not supported for chip temperature sensor on
LTC2974 and LTC2975.
power1_label "pin". LTC3883 and LTC3886 only.
power1_input Measured input power.
power[N]_label "pout[1-4]".
LTC2974, LTC2975: N=1-4
LTC2977, LTC2980, LTM2987: Not supported
LTC2978: Not supported
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=1-2
LTC3883: N=2
- LTC2974, LTC2975: N=1-4
- LTC2977, LTC2980, LTM2987: Not supported
- LTC2978: Not supported
- LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=1-2
- LTC3883: N=2
power[N]_input Measured output power.
curr1_label "iin". LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
curr1_label "iin".
LTC3880, LTC3883, LTC3886, LTC3887, LTM4675,
and LTM4676 only.
curr1_input Measured input current.
curr1_max Maximum input current.
curr1_max_alarm Input current high alarm.
curr1_highest Highest input current. LTC3883 and LTC3886 only.
curr1_reset_history Reset input current history. LTC3883 and LTC3886 only.
curr1_highest Highest input current.
LTC3883 and LTC3886 only.
curr1_reset_history Reset input current history.
LTC3883 and LTC3886 only.
curr[N]_label "iout[1-4]".
LTC2974, LTC2975: N=1-4
LTC2977, LTC2980, LTM2987: not supported
LTC2978: not supported
LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=2-3
LTC3883: N=2
- LTC2974, LTC2975: N=1-4
- LTC2977, LTC2980, LTM2987: not supported
- LTC2978: not supported
- LTC3880, LTC3882, LTC3886, LTC3887, LTM4675, LTM4676:
N=2-3
- LTC3883: N=2
curr[N]_input Measured output current.
curr[N]_max Maximum output current.
curr[N]_crit Critical high output current.
curr[N]_lcrit Critical low output current. LTC2974 and LTC2975 only.
curr[N]_max_alarm Output current high alarm.
curr[N]_crit_alarm Output current critical high alarm.
curr[N]_lcrit_alarm Output current critical low alarm.
curr[N]_lcrit Critical low output current.
LTC2974 and LTC2975 only.
curr[N]_lowest Lowest output current. LTC2974 and LTC2975 only.
curr[N]_max_alarm Output current high alarm.
curr[N]_crit_alarm Output current critical high alarm.
curr[N]_lcrit_alarm Output current critical low alarm.
LTC2974 and LTC2975 only.
curr[N]_lowest Lowest output current.
LTC2974 and LTC2975 only.
curr[N]_highest Highest output current.
curr[N]_reset_history Reset output current history.
======================= ========================================================

View File

@ -2,9 +2,13 @@ Kernel driver ltc3815
=====================
Supported chips:
* Linear Technology LTC3815
Prefix: 'ltc3815'
Addresses scanned: -
Datasheet: http://www.linear.com/product/ltc3815
Author: Guenter Roeck <linux@roeck-us.net>
@ -23,15 +27,16 @@ This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Example: the following commands will load the driver for an LTC3815
at address 0x20 on I2C bus #1:
at address 0x20 on I2C bus #1::
# modprobe ltc3815
# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
# modprobe ltc3815
# echo ltc3815 0x20 > /sys/bus/i2c/devices/i2c-1/new_device
Sysfs attributes
----------------
======================= =======================================================
in1_label "vin"
in1_input Measured input voltage.
in1_alarm Input voltage alarm.
@ -59,3 +64,4 @@ curr2_input Measured output current.
curr2_alarm Output current alarm.
curr2_highest Highest output current.
curr2_reset_history Reset output current history.
======================= =======================================================

View File

@ -2,9 +2,13 @@ Kernel driver max16064
======================
Supported chips:
* Maxim MAX16064
Prefix: 'max16064'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX16064.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -40,16 +44,20 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in[1-4]_label "vout[1-4]"
in[1-4]_input Measured voltage. From READ_VOUT register.
in[1-4]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-4]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-4]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-4]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in[1-4]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-4]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in[1-4]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in[1-4]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
in[1-4]_highest Historical maximum voltage.
in[1-4]_reset_history Write any value to reset history.
@ -64,3 +72,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
status is set.
temp1_highest Historical maximum temperature.
temp1_reset_history Write any value to reset history.
======================= ========================================================

View File

@ -2,10 +2,15 @@ Kernel driver max20751
======================
Supported chips:
* maxim MAX20751
Prefix: 'max20751'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX20751.pdf
Application note: http://pdfserv.maximintegrated.com/en/an/AN5941.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -40,6 +45,7 @@ Sysfs entries
The following attributes are supported.
======================= =======================================================
in1_label "vin1"
in1_input Measured voltage.
in1_min Minimum input voltage.
@ -75,3 +81,4 @@ temp1_crit_alarm Chip temperature critical high alarm.
power1_input Output power.
power1_label "pout1"
======================= =======================================================

View File

@ -2,9 +2,13 @@ Kernel driver max31785
======================
Supported chips:
* Maxim MAX31785, MAX31785A
Prefix: 'max31785' or 'max31785a'
Addresses scanned: -
Datasheet: https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf
Author: Andrew Jeffery <andrew@aj.id.au>
@ -30,6 +34,7 @@ devices explicitly.
Sysfs attributes
----------------
======================= =======================================================
fan[1-4]_alarm Fan alarm.
fan[1-4]_fault Fan fault.
fan[1-8]_input Fan RPM. On the MAX31785A, inputs 5-8 correspond to the
@ -58,3 +63,4 @@ temp[1-11]_crit_alarm Chip temperature critical high alarm
temp[1-11]_input Measured temperature
temp[1-11]_max Maximum temperature
temp[1-11]_max_alarm Chip temperature high alarm
======================= =======================================================

View File

@ -2,34 +2,63 @@ Kernel driver max34440
======================
Supported chips:
* Maxim MAX34440
Prefixes: 'max34440'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34440.pdf
* Maxim MAX34441
PMBus 5-Channel Power-Supply Manager and Intelligent Fan Controller
Prefixes: 'max34441'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34441.pdf
* Maxim MAX34446
PMBus Power-Supply Data Logger
Prefixes: 'max34446'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34446.pdf
* Maxim MAX34451
PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer
Prefixes: 'max34451'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34451.pdf
* Maxim MAX34460
PMBus 12-Channel Voltage Monitor & Sequencer
Prefix: 'max34460'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34460.pdf
* Maxim MAX34461
PMBus 16-Channel Voltage Monitor & Sequencer
Prefix: 'max34461'
Addresses scanned: -
Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34461.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -77,42 +106,67 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
In
~~
======================= =======================================================
in[1-6]_label "vout[1-6]".
in[1-6]_input Measured voltage. From READ_VOUT register.
in[1-6]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-6]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-6]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-6]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in[1-6]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-6]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in[1-6]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in[1-6]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
in[1-6]_lowest Historical minimum voltage.
in[1-6]_highest Historical maximum voltage.
in[1-6]_reset_history Write any value to reset history.
======================= =======================================================
MAX34446 only supports in[1-4].
.. note:: MAX34446 only supports in[1-4].
Curr
~~~~
======================= ========================================================
curr[1-6]_label "iout[1-6]".
curr[1-6]_input Measured current. From READ_IOUT register.
curr[1-6]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-6]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
curr[1-4]_average Historical average current (MAX34446/34451 only).
curr[1-6]_highest Historical maximum current.
curr[1-6]_reset_history Write any value to reset history.
======================= ========================================================
in6 and curr6 attributes only exist for MAX34440.
MAX34446 only supports curr[1-4].
.. note::
- in6 and curr6 attributes only exist for MAX34440.
- MAX34446 only supports curr[1-4].
Power
~~~~~
======================= ========================================================
power[1,3]_label "pout[1,3]"
power[1,3]_input Measured power.
power[1,3]_average Historical average power.
power[1,3]_highest Historical maximum power.
======================= ========================================================
Power attributes only exist for MAX34446.
.. note:: Power attributes only exist for MAX34446.
Temp
~~~~
======================= ========================================================
temp[1-8]_input Measured temperatures. From READ_TEMPERATURE_1 register.
temp1 is the chip's internal temperature. temp2..temp5
are remote I2C temperature sensors. For MAX34441, temp6
@ -125,11 +179,17 @@ temp[1-8]_crit_alarm Temperature critical high alarm.
temp[1-8]_average Historical average temperature (MAX34446 only).
temp[1-8]_highest Historical maximum temperature.
temp[1-8]_reset_history Write any value to reset history.
======================= ========================================================
temp7 and temp8 attributes only exist for MAX34440.
MAX34446 only supports temp[1-3].
MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input pins)
and temp[1-5].
MAX34460 supports attribute groups in[1-12] and temp[1-5].
MAX34461 supports attribute groups in[1-16] and temp[1-5].
.. note::
- temp7 and temp8 attributes only exist for MAX34440.
- MAX34446 only supports temp[1-3].
.. note::
- MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on
input pins) and temp[1-5].
- MAX34460 supports attribute groups in[1-12] and temp[1-5].
- MAX34461 supports attribute groups in[1-16] and temp[1-5].

View File

@ -2,9 +2,13 @@ Kernel driver max8688
=====================
Supported chips:
* Maxim MAX8688
Prefix: 'max8688'
Addresses scanned: -
Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8688.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -40,23 +44,28 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in1_label "vout1"
in1_input Measured voltage. From READ_VOUT register.
in1_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in1_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in1_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in1_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in1_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
in1_highest Historical maximum voltage.
in1_reset_history Write any value to reset history.
curr1_label "iout1"
curr1_input Measured current. From READ_IOUT register.
curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT register.
curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
curr1_highest Historical maximum current.
@ -73,3 +82,4 @@ temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
status is set.
temp1_highest Historical maximum temperature.
temp1_reset_history Write any value to reset history.
======================= ========================================================

View File

@ -1,42 +1,77 @@
Kernel driver pmbus
====================
===================
Supported chips:
* Ericsson BMR453, BMR454
Prefixes: 'bmr453', 'bmr454'
Addresses scanned: -
Datasheet:
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146395
* ON Semiconductor ADP4000, NCP4200, NCP4208
Prefixes: 'adp4000', 'ncp4200', 'ncp4208'
Addresses scanned: -
Datasheets:
http://www.onsemi.com/pub_link/Collateral/ADP4000-D.PDF
http://www.onsemi.com/pub_link/Collateral/NCP4200-D.PDF
http://www.onsemi.com/pub_link/Collateral/JUNE%202009-%20REV.%200.PDF
* Lineage Power
Prefixes: 'mdt040', 'pdt003', 'pdt006', 'pdt012', 'udt020'
Addresses scanned: -
Datasheets:
http://www.lineagepower.com/oem/pdf/PDT003A0X.pdf
http://www.lineagepower.com/oem/pdf/PDT006A0X.pdf
http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf
http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf
http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf
* Texas Instruments TPS40400, TPS544B20, TPS544B25, TPS544C20, TPS544C25
Prefixes: 'tps40400', 'tps544b20', 'tps544b25', 'tps544c20', 'tps544c25'
Addresses scanned: -
Datasheets:
http://www.ti.com/lit/gpn/tps40400
http://www.ti.com/lit/gpn/tps544b20
http://www.ti.com/lit/gpn/tps544b25
http://www.ti.com/lit/gpn/tps544c20
http://www.ti.com/lit/gpn/tps544c25
* Generic PMBus devices
Prefix: 'pmbus'
Addresses scanned: -
Datasheet: n.a.
Author: Guenter Roeck <linux@roeck-us.net>
@ -62,9 +97,10 @@ supported by all chips), and since there is no well defined address range for
PMBus devices. You will have to instantiate the devices explicitly.
Example: the following will load the driver for an LTC2978 at address 0x60
on I2C bus #1:
$ modprobe pmbus
$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
on I2C bus #1::
$ modprobe pmbus
$ echo ltc2978 0x60 > /sys/bus/i2c/devices/i2c-1/new_device
Platform data support
@ -72,9 +108,9 @@ Platform data support
Support for additional PMBus chips can be added by defining chip parameters in
a new chip specific driver file. For example, (untested) code to add support for
Emerson DS1200 power modules might look as follows.
Emerson DS1200 power modules might look as follows::
static struct pmbus_driver_info ds1200_info = {
static struct pmbus_driver_info ds1200_info = {
.pages = 1,
/* Note: All other sensors are in linear mode */
.direct[PSC_VOLTAGE_OUT] = true,
@ -95,45 +131,45 @@ static struct pmbus_driver_info ds1200_info = {
| PMBUS_HAVE_PIN | PMBUS_HAVE_POUT
| PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP
| PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12,
};
};
static int ds1200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
static int ds1200_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
return pmbus_do_probe(client, id, &ds1200_info);
}
}
static int ds1200_remove(struct i2c_client *client)
{
static int ds1200_remove(struct i2c_client *client)
{
return pmbus_do_remove(client);
}
}
static const struct i2c_device_id ds1200_id[] = {
static const struct i2c_device_id ds1200_id[] = {
{"ds1200", 0},
{}
};
};
MODULE_DEVICE_TABLE(i2c, ds1200_id);
MODULE_DEVICE_TABLE(i2c, ds1200_id);
/* This is the driver that will be inserted */
static struct i2c_driver ds1200_driver = {
/* This is the driver that will be inserted */
static struct i2c_driver ds1200_driver = {
.driver = {
.name = "ds1200",
},
.probe = ds1200_probe,
.remove = ds1200_remove,
.id_table = ds1200_id,
};
};
static int __init ds1200_init(void)
{
static int __init ds1200_init(void)
{
return i2c_add_driver(&ds1200_driver);
}
}
static void __exit ds1200_exit(void)
{
static void __exit ds1200_exit(void)
{
i2c_del_driver(&ds1200_driver);
}
}
Sysfs entries
@ -148,6 +184,7 @@ a given sysfs entry.
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
inX_input Measured voltage. From READ_VIN or READ_VOUT register.
inX_min Minimum Voltage.
From VIN_UV_WARN_LIMIT or VOUT_UV_WARN_LIMIT register.
@ -214,3 +251,4 @@ tempX_lcrit_alarm Chip temperature critical low alarm. Set by comparing
tempX_crit_alarm Chip temperature critical high alarm. Set by comparing
READ_TEMPERATURE_X with OT_FAULT_LIMIT if
TEMP_OT_FAULT status is set.
======================= ========================================================

View File

@ -1,3 +1,4 @@
==================================
PMBus core driver and internal API
==================================
@ -120,24 +121,24 @@ Specifically, it provides the following information.
non-standard PMBus commands to standard commands, or to augment standard
command return values with device specific information.
API functions
-------------
API functions
=============
Functions provided by chip driver
---------------------------------
Functions provided by chip driver
---------------------------------
All functions return the command return value (read) or zero (write) if
successful. A return value of -ENODATA indicates that there is no manufacturer
specific command, but that a standard PMBus command may exist. Any other
negative return value indicates that the commands does not exist for this
chip, and that no attempt should be made to read or write the standard
command.
All functions return the command return value (read) or zero (write) if
successful. A return value of -ENODATA indicates that there is no manufacturer
specific command, but that a standard PMBus command may exist. Any other
negative return value indicates that the commands does not exist for this
chip, and that no attempt should be made to read or write the standard
command.
As mentioned above, an exception to this rule applies to virtual commands,
which _must_ be handled in driver specific code. See "Virtual PMBus Commands"
above for more details.
As mentioned above, an exception to this rule applies to virtual commands,
which *must* be handled in driver specific code. See "Virtual PMBus Commands"
above for more details.
Command execution in the core PMBus driver code is as follows.
Command execution in the core PMBus driver code is as follows::
if (chip_access_function) {
status = chip_access_function();
@ -148,128 +149,160 @@ Specifically, it provides the following information.
return -EINVAL;
return generic_access();
Chip drivers may provide pointers to the following functions in struct
pmbus_driver_info. All functions are optional.
Chip drivers may provide pointers to the following functions in struct
pmbus_driver_info. All functions are optional.
::
int (*read_byte_data)(struct i2c_client *client, int page, int reg);
Read byte from page <page>, register <reg>.
<page> may be -1, which means "current page".
Read byte from page <page>, register <reg>.
<page> may be -1, which means "current page".
::
int (*read_word_data)(struct i2c_client *client, int page, int reg);
Read word from page <page>, register <reg>.
Read word from page <page>, register <reg>.
::
int (*write_word_data)(struct i2c_client *client, int page, int reg,
u16 word);
u16 word);
Write word to page <page>, register <reg>.
Write word to page <page>, register <reg>.
::
int (*write_byte)(struct i2c_client *client, int page, u8 value);
Write byte to page <page>, register <reg>.
<page> may be -1, which means "current page".
Write byte to page <page>, register <reg>.
<page> may be -1, which means "current page".
::
int (*identify)(struct i2c_client *client, struct pmbus_driver_info *info);
Determine supported PMBus functionality. This function is only necessary
if a chip driver supports multiple chips, and the chip functionality is not
pre-determined. It is currently only used by the generic pmbus driver
(pmbus.c).
Determine supported PMBus functionality. This function is only necessary
if a chip driver supports multiple chips, and the chip functionality is not
pre-determined. It is currently only used by the generic pmbus driver
(pmbus.c).
Functions exported by core driver
---------------------------------
Functions exported by core driver
---------------------------------
Chip drivers are expected to use the following functions to read or write
PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C
commands are used, the chip driver code must not directly modify the current
page, since the selected page is cached in the core driver and the core driver
will assume that it is selected. Using pmbus_set_page() to select a new page
is mandatory.
Chip drivers are expected to use the following functions to read or write
PMBus registers. Chip drivers may also use direct I2C commands. If direct I2C
commands are used, the chip driver code must not directly modify the current
page, since the selected page is cached in the core driver and the core driver
will assume that it is selected. Using pmbus_set_page() to select a new page
is mandatory.
::
int pmbus_set_page(struct i2c_client *client, u8 page);
Set PMBus page register to <page> for subsequent commands.
Set PMBus page register to <page> for subsequent commands.
::
int pmbus_read_word_data(struct i2c_client *client, u8 page, u8 reg);
Read word data from <page>, <reg>. Similar to i2c_smbus_read_word_data(), but
selects page first.
Read word data from <page>, <reg>. Similar to i2c_smbus_read_word_data(), but
selects page first.
::
int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg,
u16 word);
Write word data to <page>, <reg>. Similar to i2c_smbus_write_word_data(), but
selects page first.
Write word data to <page>, <reg>. Similar to i2c_smbus_write_word_data(), but
selects page first.
::
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
Read byte data from <page>, <reg>. Similar to i2c_smbus_read_byte_data(), but
selects page first. <page> may be -1, which means "current page".
Read byte data from <page>, <reg>. Similar to i2c_smbus_read_byte_data(), but
selects page first. <page> may be -1, which means "current page".
::
int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
Write byte data to <page>, <reg>. Similar to i2c_smbus_write_byte(), but
selects page first. <page> may be -1, which means "current page".
Write byte data to <page>, <reg>. Similar to i2c_smbus_write_byte(), but
selects page first. <page> may be -1, which means "current page".
::
void pmbus_clear_faults(struct i2c_client *client);
Execute PMBus "Clear Fault" command on all chip pages.
This function calls the device specific write_byte function if defined.
Therefore, it must _not_ be called from that function.
Execute PMBus "Clear Fault" command on all chip pages.
This function calls the device specific write_byte function if defined.
Therefore, it must _not_ be called from that function.
::
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
Check if byte register exists. Return true if the register exists, false
otherwise.
This function calls the device specific write_byte function if defined to
obtain the chip status. Therefore, it must _not_ be called from that function.
Check if byte register exists. Return true if the register exists, false
otherwise.
This function calls the device specific write_byte function if defined to
obtain the chip status. Therefore, it must _not_ be called from that function.
::
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
Check if word register exists. Return true if the register exists, false
otherwise.
This function calls the device specific write_byte function if defined to
obtain the chip status. Therefore, it must _not_ be called from that function.
Check if word register exists. Return true if the register exists, false
otherwise.
This function calls the device specific write_byte function if defined to
obtain the chip status. Therefore, it must _not_ be called from that function.
::
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
struct pmbus_driver_info *info);
struct pmbus_driver_info *info);
Execute probe function. Similar to standard probe function for other drivers,
with the pointer to struct pmbus_driver_info as additional argument. Calls
identify function if supported. Must only be called from device probe
function.
Execute probe function. Similar to standard probe function for other drivers,
with the pointer to struct pmbus_driver_info as additional argument. Calls
identify function if supported. Must only be called from device probe
function.
::
void pmbus_do_remove(struct i2c_client *client);
Execute driver remove function. Similar to standard driver remove function.
Execute driver remove function. Similar to standard driver remove function.
::
const struct pmbus_driver_info
*pmbus_get_driver_info(struct i2c_client *client);
Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe().
Return pointer to struct pmbus_driver_info as passed to pmbus_do_probe().
PMBus driver platform data
==========================
PMBus platform data is defined in include/linux/pmbus.h. Platform data
currently only provides a flag field with a single bit used.
currently only provides a flag field with a single bit used::
#define PMBUS_SKIP_STATUS_CHECK (1 << 0)
#define PMBUS_SKIP_STATUS_CHECK (1 << 0)
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
};
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
};
Flags
-----
PMBUS_SKIP_STATUS_CHECK
During register detection, skip checking the status register for
communication or command errors.
During register detection, skip checking the status register for
communication or command errors.
Some PMBus chips respond with valid data when trying to read an unsupported
register. For such chips, checking the status register is mandatory when

View File

@ -2,9 +2,13 @@ Kernel driver tps40422
======================
Supported chips:
* TI TPS40422
Prefix: 'tps40422'
Addresses scanned: -
Datasheet: http://www.ti.com/lit/gpn/tps40422
Author: Zhu Laiwen <richard.zhu@nsn.com>
@ -39,6 +43,7 @@ Sysfs entries
The following attributes are supported.
======================= =======================================================
in[1-2]_label "vout[1-2]"
in[1-2]_input Measured voltage. From READ_VOUT register.
in[1-2]_alarm voltage alarm.
@ -46,19 +51,23 @@ in[1-2]_alarm voltage alarm.
curr[1-2]_input Measured current. From READ_IOUT register.
curr[1-2]_label "iout[1-2]"
curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status.
curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
curr2_alarm Current high alarm. From IOUT_OC_WARNING status.
temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0.
temp1_input Measured temperature. From READ_TEMPERATURE_2 register
on page 0.
temp1_max Maximum temperature. From OT_WARN_LIMIT register.
temp1_crit Critical high temperature. From OT_FAULT_LIMIT register.
temp1_max_alarm Chip temperature high alarm. Set by comparing
READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING
status is set.
READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if
TEMP_OT_WARNING status is set.
temp1_crit_alarm Chip temperature critical high alarm. Set by comparing
READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT
status is set.
temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1.
READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if
TEMP_OT_FAULT status is set.
temp2_input Measured temperature. From READ_TEMPERATURE_2 register
on page 1.
temp2_alarm Chip temperature alarm on page 1.
======================= =======================================================

View File

@ -2,15 +2,20 @@ Kernel driver ucd9000
=====================
Supported chips:
* TI UCD90120, UCD90124, UCD90160, UCD9090, and UCD90910
Prefixes: 'ucd90120', 'ucd90124', 'ucd90160', 'ucd9090', 'ucd90910'
Addresses scanned: -
Datasheets:
http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
- http://focus.ti.com/lit/ds/symlink/ucd90120.pdf
- http://focus.ti.com/lit/ds/symlink/ucd90124.pdf
- http://focus.ti.com/lit/ds/symlink/ucd90160.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9090.pdf
- http://focus.ti.com/lit/ds/symlink/ucd90910.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -76,23 +81,28 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in[1-12]_label "vout[1-12]".
in[1-12]_input Measured voltage. From READ_VOUT register.
in[1-12]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[1-12]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
curr[1-12]_label "iout[1-12]".
curr[1-12]_input Measured current. From READ_IOUT register.
curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[1-12]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
curr[1-12]_lcrit Critical minimum output current. From
IOUT_UC_FAULT_LIMIT register.
curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
@ -116,3 +126,4 @@ fan[1-4]_fault Fan fault.
created only for enabled fans.
Note that even though UCD90910 supports up to 10 fans,
only up to four fans are currently supported.
======================= ========================================================

View File

@ -2,18 +2,23 @@ Kernel driver ucd9200
=====================
Supported chips:
* TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
Prefixes: 'ucd9220', 'ucd9222', 'ucd9224', 'ucd9240', 'ucd9244', 'ucd9246',
'ucd9248'
'ucd9248'
Addresses scanned: -
Datasheets:
http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9220.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9222.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9224.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9240.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9244.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9246.pdf
- http://focus.ti.com/lit/ds/symlink/ucd9248.pdf
Author: Guenter Roeck <linux@roeck-us.net>
@ -52,12 +57,14 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in1_label "vin".
in1_input Measured voltage. From READ_VIN register.
in1_min Minimum Voltage. From VIN_UV_WARN_LIMIT register.
in1_max Maximum voltage. From VIN_OV_WARN_LIMIT register.
in1_lcrit Critical minimum Voltage. VIN_UV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT register.
in1_crit Critical maximum voltage. From VIN_OV_FAULT_LIMIT
register.
in1_min_alarm Voltage low alarm. From VIN_UV_WARNING status.
in1_max_alarm Voltage high alarm. From VIN_OV_WARNING status.
in1_lcrit_alarm Voltage critical low alarm. From VIN_UV_FAULT status.
@ -68,11 +75,14 @@ in[2-5]_input Measured voltage. From READ_VOUT register.
in[2-5]_min Minimum Voltage. From VOUT_UV_WARN_LIMIT register.
in[2-5]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register.
in[2-5]_lcrit Critical minimum Voltage. VOUT_UV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register.
in[2-5]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT
register.
in[2-5]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status.
in[2-5]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status.
in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status.
in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status.
in[2-5]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT
status.
in[2-5]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT
status.
curr1_label "iin".
curr1_input Measured current. From READ_IIN register.
@ -80,9 +90,10 @@ curr1_input Measured current. From READ_IIN register.
curr[2-5]_label "iout[1-4]".
curr[2-5]_input Measured current. From READ_IOUT register.
curr[2-5]_max Maximum current. From IOUT_OC_WARN_LIMIT register.
curr[2-5]_lcrit Critical minimum output current. From IOUT_UC_FAULT_LIMIT
curr[2-5]_lcrit Critical minimum output current. From
IOUT_UC_FAULT_LIMIT register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT
register.
curr[2-5]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register.
curr[2-5]_max_alarm Current high alarm. From IOUT_OC_WARNING status.
curr[2-5]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status.
@ -97,7 +108,7 @@ power[2-5]_label "pout[1-4]"
rails. See chip datasheets for details.
temp[1-5]_input Measured temperatures. From READ_TEMPERATURE_1 and
READ_TEMPERATURE_2 registers.
READ_TEMPERATURE_2 registers.
temp1 is the chip internal temperature. temp[2-5] are
rail temperatures. temp[2-5] attributes are only
created for enabled rails. See chip datasheets for
@ -110,3 +121,4 @@ temp[1-5]_crit_alarm Temperature critical high alarm.
fan1_input Fan RPM. ucd9240 only.
fan1_alarm Fan alarm. ucd9240 only.
fan1_fault Fan fault. ucd9240 only.
======================= ========================================================

View File

@ -2,57 +2,106 @@ Kernel driver zl6100
====================
Supported chips:
* Intersil / Zilker Labs ZL2004
Prefix: 'zl2004'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
* Intersil / Zilker Labs ZL2005
Prefix: 'zl2005'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6848.pdf
* Intersil / Zilker Labs ZL2006
Prefix: 'zl2006'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
* Intersil / Zilker Labs ZL2008
Prefix: 'zl2008'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
* Intersil / Zilker Labs ZL2105
Prefix: 'zl2105'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
* Intersil / Zilker Labs ZL2106
Prefix: 'zl2106'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
* Intersil / Zilker Labs ZL6100
Prefix: 'zl6100'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
* Intersil / Zilker Labs ZL6105
Prefix: 'zl6105'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
* Intersil / Zilker Labs ZL9101M
Prefix: 'zl9101'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
* Intersil / Zilker Labs ZL9117M
Prefix: 'zl9117'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
* Ericsson BMR450, BMR451
Prefix: 'bmr450', 'bmr451'
Addresses scanned: -
Datasheet:
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
* Ericsson BMR462, BMR463, BMR464
Prefixes: 'bmr462', 'bmr463', 'bmr464'
Addresses scanned: -
Datasheet:
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
* Intersil / Zilker Labs ZL2004
Prefix: 'zl2004'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6847.pdf
* Intersil / Zilker Labs ZL2005
Prefix: 'zl2005'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6848.pdf
* Intersil / Zilker Labs ZL2006
Prefix: 'zl2006'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6850.pdf
* Intersil / Zilker Labs ZL2008
Prefix: 'zl2008'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6859.pdf
* Intersil / Zilker Labs ZL2105
Prefix: 'zl2105'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6851.pdf
* Intersil / Zilker Labs ZL2106
Prefix: 'zl2106'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6852.pdf
* Intersil / Zilker Labs ZL6100
Prefix: 'zl6100'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6876.pdf
* Intersil / Zilker Labs ZL6105
Prefix: 'zl6105'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn6906.pdf
* Intersil / Zilker Labs ZL9101M
Prefix: 'zl9101'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn7669.pdf
* Intersil / Zilker Labs ZL9117M
Prefix: 'zl9117'
Addresses scanned: -
Datasheet: http://www.intersil.com/data/fn/fn7914.pdf
* Ericsson BMR450, BMR451
Prefix: 'bmr450', 'bmr451'
Addresses scanned: -
Datasheet:
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146401
* Ericsson BMR462, BMR463, BMR464
Prefixes: 'bmr462', 'bmr463', 'bmr464'
Addresses scanned: -
Datasheet:
http://archive.ericsson.net/service/internet/picov/get?DocNo=28701-EN/LZT146256
Author: Guenter Roeck <linux@roeck-us.net>
@ -75,13 +124,15 @@ This driver does not auto-detect devices. You will have to instantiate the
devices explicitly. Please see Documentation/i2c/instantiating-devices for
details.
WARNING: Do not access chip registers using the i2cdump command, and do not use
any of the i2ctools commands on a command register used to save and restore
configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
this driver interpret any access to those command registers (including read
commands) as request to execute the command in question. Unless write accesses
to those registers are protected, this may result in power loss, board resets,
and/or Flash corruption. Worst case, your board may turn into a brick.
.. warning::
Do not access chip registers using the i2cdump command, and do not use
any of the i2ctools commands on a command register used to save and restore
configuration data (0x11, 0x12, 0x15, 0x16, and 0xf4). The chips supported by
this driver interpret any access to those command registers (including read
commands) as request to execute the command in question. Unless write accesses
to those registers are protected, this may result in power loss, board resets,
and/or Flash corruption. Worst case, your board may turn into a brick.
Platform data support
@ -110,6 +161,7 @@ Sysfs entries
The following attributes are supported. Limits are read-write; all other
attributes are read-only.
======================= ========================================================
in1_label "vin"
in1_input Measured input voltage.
in1_min Minimum input voltage.
@ -158,3 +210,4 @@ temp[12]_min_alarm Chip temperature low alarm.
temp[12]_max_alarm Chip temperature high alarm.
temp[12]_lcrit_alarm Chip temperature critical low alarm.
temp[12]_crit_alarm Chip temperature critical high alarm.
======================= ========================================================