diff --git a/tools/memory-model/Documentation/cheatsheet.txt b/tools/memory-model/Documentation/cheatsheet.txt new file mode 100644 index 000000000000..1917712bce99 --- /dev/null +++ b/tools/memory-model/Documentation/cheatsheet.txt @@ -0,0 +1,30 @@ + Prior Operation Subsequent Operation + --------------- --------------------------- + C Self R W RWM Self R W DR DW RMW SV + __ ---- - - --- ---- - - -- -- --- -- + +Store, e.g., WRITE_ONCE() Y Y +Load, e.g., READ_ONCE() Y Y Y +Unsuccessful RMW operation Y Y Y +smp_read_barrier_depends() Y Y Y +*_dereference() Y Y Y Y +Successful *_acquire() R Y Y Y Y Y Y +Successful *_release() C Y Y Y W Y +smp_rmb() Y R Y Y R +smp_wmb() Y W Y Y W +smp_mb() & synchronize_rcu() CP Y Y Y Y Y Y Y Y +Successful full non-void RMW CP Y Y Y Y Y Y Y Y Y Y Y +smp_mb__before_atomic() CP Y Y Y a a a a Y +smp_mb__after_atomic() CP a a Y Y Y Y Y + + +Key: C: Ordering is cumulative + P: Ordering propagates + R: Read, for example, READ_ONCE(), or read portion of RMW + W: Write, for example, WRITE_ONCE(), or write portion of RMW + Y: Provides ordering + a: Provides ordering given intervening RMW atomic operation + DR: Dependent read (address dependency) + DW: Dependent write (address, data, or control dependency) + RMW: Atomic read-modify-write operation + SV Same-variable access diff --git a/tools/memory-model/Documentation/explanation.txt b/tools/memory-model/Documentation/explanation.txt new file mode 100644 index 000000000000..867e0ea69b6d --- /dev/null +++ b/tools/memory-model/Documentation/explanation.txt @@ -0,0 +1,1840 @@ +Explanation of the Linux-Kernel Memory Model +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +:Author: Alan Stern +:Created: October 2017 + +.. Contents + + 1. INTRODUCTION + 2. BACKGROUND + 3. A SIMPLE EXAMPLE + 4. A SELECTION OF MEMORY MODELS + 5. ORDERING AND CYCLES + 6. EVENTS + 7. THE PROGRAM ORDER RELATION: po AND po-loc + 8. A WARNING + 9. DEPENDENCY RELATIONS: data, addr, and ctrl + 10. THE READS-FROM RELATION: rf, rfi, and rfe + 11. CACHE COHERENCE AND THE COHERENCE ORDER RELATION: co, coi, and coe + 12. THE FROM-READS RELATION: fr, fri, and fre + 13. AN OPERATIONAL MODEL + 14. PROPAGATION ORDER RELATION: cumul-fence + 15. DERIVATION OF THE LKMM FROM THE OPERATIONAL MODEL + 16. SEQUENTIAL CONSISTENCY PER VARIABLE + 17. ATOMIC UPDATES: rmw + 18. THE PRESERVED PROGRAM ORDER RELATION: ppo + 19. AND THEN THERE WAS ALPHA + 20. THE HAPPENS-BEFORE RELATION: hb + 21. THE PROPAGATES-BEFORE RELATION: pb + 22. RCU RELATIONS: link, gp-link, rscs-link, and rcu-path + 23. ODDS AND ENDS + + + +INTRODUCTION +------------ + +The Linux-kernel memory model (LKMM) is rather complex and obscure. +This is particularly evident if you read through the linux-kernel.bell +and linux-kernel.cat files that make up the formal version of the +memory model; they are extremely terse and their meanings are far from +clear. + +This document describes the ideas underlying the LKMM. It is meant +for people who want to understand how the memory model was designed. +It does not go into the details of the code in the .bell and .cat +files; rather, it explains in English what the code expresses +symbolically. + +Sections 2 (BACKGROUND) through 5 (ORDERING AND CYCLES) are aimed +toward beginners; they explain what memory models are and the basic +notions shared by all such models. People already familiar with these +concepts can skim or skip over them. Sections 6 (EVENTS) through 12 +(THE FROM_READS RELATION) describe the fundamental relations used in +many memory models. Starting in Section 13 (AN OPERATIONAL MODEL), +the workings of the LKMM itself are covered. + +Warning: The code examples in this document are not written in the +proper format for litmus tests. They don't include a header line, the +initializations are not enclosed in braces, the global variables are +not passed by pointers, and they don't have an "exists" clause at the +end. Converting them to the right format is left as an exercise for +the reader. + + +BACKGROUND +---------- + +A memory consistency model (or just memory model, for short) is +something which predicts, given a piece of computer code running on a +particular kind of system, what values may be obtained by the code's +load instructions. The LKMM makes these predictions for code running +as part of the Linux kernel. + +In practice, people tend to use memory models the other way around. +That is, given a piece of code and a collection of values specified +for the loads, the model will predict whether it is possible for the +code to run in such a way that the loads will indeed obtain the +specified values. Of course, this is just another way of expressing +the same idea. + +For code running on a uniprocessor system, the predictions are easy: +Each load instruction must obtain the value written by the most recent +store instruction accessing the same location (we ignore complicating +factors such as DMA and mixed-size accesses.) But on multiprocessor +systems, with multiple CPUs making concurrent accesses to shared +memory locations, things aren't so simple. + +Different architectures have differing memory models, and the Linux +kernel supports a variety of architectures. The LKMM has to be fairly +permissive, in the sense that any behavior allowed by one of these +architectures also has to be allowed by the LKMM. + + +A SIMPLE EXAMPLE +---------------- + +Here is a simple example to illustrate the basic concepts. Consider +some code running as part of a device driver for an input device. The +driver might contain an interrupt handler which collects data from the +device, stores it in a buffer, and sets a flag to indicate the buffer +is full. Running concurrently on a different CPU might be a part of +the driver code being executed by a process in the midst of a read(2) +system call. This code tests the flag to see whether the buffer is +ready, and if it is, copies the data back to userspace. The buffer +and the flag are memory locations shared between the two CPUs. + +We can abstract out the important pieces of the driver code as follows +(the reason for using WRITE_ONCE() and READ_ONCE() instead of simple +assignment statements is discussed later): + + int buf = 0, flag = 0; + + P0() + { + WRITE_ONCE(buf, 1); + WRITE_ONCE(flag, 1); + } + + P1() + { + int r1; + int r2 = 0; + + r1 = READ_ONCE(flag); + if (r1) + r2 = READ_ONCE(buf); + } + +Here the P0() function represents the interrupt handler running on one +CPU and P1() represents the read() routine running on another. The +value 1 stored in buf represents input data collected from the device. +Thus, P0 stores the data in buf and then sets flag. Meanwhile, P1 +reads flag into the private variable r1, and if it is set, reads the +data from buf into a second private variable r2 for copying to +userspace. (Presumably if flag is not set then the driver will wait a +while and try again.) + +This pattern of memory accesses, where one CPU stores values to two +shared memory locations and another CPU loads from those locations in +the opposite order, is widely known as the "Message Passing" or MP +pattern. It is typical of memory access patterns in the kernel. + +Please note that this example code is a simplified abstraction. Real +buffers are usually larger than a single integer, real device drivers +usually use sleep and wakeup mechanisms rather than polling for I/O +completion, and real code generally doesn't bother to copy values into +private variables before using them. All that is beside the point; +the idea here is simply to illustrate the overall pattern of memory +accesses by the CPUs. + +A memory model will predict what values P1 might obtain for its loads +from flag and buf, or equivalently, what values r1 and r2 might end up +with after the code has finished running. + +Some predictions are trivial. For instance, no sane memory model would +predict that r1 = 42 or r2 = -7, because neither of those values ever +gets stored in flag or buf. + +Some nontrivial predictions are nonetheless quite simple. For +instance, P1 might run entirely before P0 begins, in which case r1 and +r2 will both be 0 at the end. Or P0 might run entirely before P1 +begins, in which case r1 and r2 will both be 1. + +The interesting predictions concern what might happen when the two +routines run concurrently. One possibility is that P1 runs after P0's +store to buf but before the store to flag. In this case, r1 and r2 +will again both be 0. (If P1 had been designed to read buf +unconditionally then we would instead have r1 = 0 and r2 = 1.) + +However, the most interesting possibility is where r1 = 1 and r2 = 0. +If this were to occur it would mean the driver contains a bug, because +incorrect data would get sent to the user: 0 instead of 1. As it +happens, the LKMM does predict this outcome can occur, and the example +driver code shown above is indeed buggy. + + +A SELECTION OF MEMORY MODELS +---------------------------- + +The first widely cited memory model, and the simplest to understand, +is Sequential Consistency. According to this model, systems behave as +if each CPU executed its instructions in order but with unspecified +timing. In other words, the instructions from the various CPUs get +interleaved in a nondeterministic way, always according to some single +global order that agrees with the order of the instructions in the +program source for each CPU. The model says that the value obtained +by each load is simply the value written by the most recently executed +store to the same memory location, from any CPU. + +For the MP example code shown above, Sequential Consistency predicts +that the undesired result r1 = 1, r2 = 0 cannot occur. The reasoning +goes like this: + + Since r1 = 1, P0 must store 1 to flag before P1 loads 1 from + it, as loads can obtain values only from earlier stores. + + P1 loads from flag before loading from buf, since CPUs execute + their instructions in order. + + P1 must load 0 from buf before P0 stores 1 to it; otherwise r2 + would be 1 since a load obtains its value from the most recent + store to the same address. + + P0 stores 1 to buf before storing 1 to flag, since it executes + its instructions in order. + + Since an instruction (in this case, P1's store to flag) cannot + execute before itself, the specified outcome is impossible. + +However, real computer hardware almost never follows the Sequential +Consistency memory model; doing so would rule out too many valuable +performance optimizations. On ARM and PowerPC architectures, for +instance, the MP example code really does sometimes yield r1 = 1 and +r2 = 0. + +x86 and SPARC follow yet a different memory model: TSO (Total Store +Ordering). This model predicts that the undesired outcome for the MP +pattern cannot occur, but in other respects it differs from Sequential +Consistency. One example is the Store Buffer (SB) pattern, in which +each CPU stores to its own shared location and then loads from the +other CPU's location: + + int x = 0, y = 0; + + P0() + { + int r0; + + WRITE_ONCE(x, 1); + r0 = READ_ONCE(y); + } + + P1() + { + int r1; + + WRITE_ONCE(y, 1); + r1 = READ_ONCE(x); + } + +Sequential Consistency predicts that the outcome r0 = 0, r1 = 0 is +impossible. (Exercise: Figure out the reasoning.) But TSO allows +this outcome to occur, and in fact it does sometimes occur on x86 and +SPARC systems. + +The LKMM was inspired by the memory models followed by PowerPC, ARM, +x86, Alpha, and other architectures. However, it is different in +detail from each of them. + + +ORDERING AND CYCLES +------------------- + +Memory models are all about ordering. Often this is temporal ordering +(i.e., the order in which certain events occur) but it doesn't have to +be; consider for example the order of instructions in a program's +source code. We saw above that Sequential Consistency makes an +important assumption that CPUs execute instructions in the same order +as those instructions occur in the code, and there are many other +instances of ordering playing central roles in memory models. + +The counterpart to ordering is a cycle. Ordering rules out cycles: +It's not possible to have X ordered before Y, Y ordered before Z, and +Z ordered before X, because this would mean that X is ordered before +itself. The analysis of the MP example under Sequential Consistency +involved just such an impossible cycle: + + W: P0 stores 1 to flag executes before + X: P1 loads 1 from flag executes before + Y: P1 loads 0 from buf executes before + Z: P0 stores 1 to buf executes before + W: P0 stores 1 to flag. + +In short, if a memory model requires certain accesses to be ordered, +and a certain outcome for the loads in a piece of code can happen only +if those accesses would form a cycle, then the memory model predicts +that outcome cannot occur. + +The LKMM is defined largely in terms of cycles, as we will see. + + +EVENTS +------ + +The LKMM does not work directly with the C statements that make up +kernel source code. Instead it considers the effects of those +statements in a more abstract form, namely, events. The model +includes three types of events: + + Read events correspond to loads from shared memory, such as + calls to READ_ONCE(), smp_load_acquire(), or + rcu_dereference(). + + Write events correspond to stores to shared memory, such as + calls to WRITE_ONCE(), smp_store_release(), or atomic_set(). + + Fence events correspond to memory barriers (also known as + fences), such as calls to smp_rmb() or rcu_read_lock(). + +These categories are not exclusive; a read or write event can also be +a fence. This happens with functions like smp_load_acquire() or +spin_lock(). However, no single event can be both a read and a write. +Atomic read-modify-write accesses, such as atomic_inc() or xchg(), +correspond to a pair of events: a read followed by a write. (The +write event is omitted for executions where it doesn't occur, such as +a cmpxchg() where the comparison fails.) + +Other parts of the code, those which do not involve interaction with +shared memory, do not give rise to events. Thus, arithmetic and +logical computations, control-flow instructions, or accesses to +private memory or CPU registers are not of central interest to the +memory model. They only affect the model's predictions indirectly. +For example, an arithmetic computation might determine the value that +gets stored to a shared memory location (or in the case of an array +index, the address where the value gets stored), but the memory model +is concerned only with the store itself -- its value and its address +-- not the computation leading up to it. + +Events in the LKMM can be linked by various relations, which we will +describe in the following sections. The memory model requires certain +of these relations to be orderings, that is, it requires them not to +have any cycles. + + +THE PROGRAM ORDER RELATION: po AND po-loc +----------------------------------------- + +The most important relation between events is program order (po). You +can think of it as the order in which statements occur in the source +code after branches are taken into account and loops have been +unrolled. A better description might be the order in which +instructions are presented to a CPU's execution unit. Thus, we say +that X is po-before Y (written as "X ->po Y" in formulas) if X occurs +before Y in the instruction stream. + +This is inherently a single-CPU relation; two instructions executing +on different CPUs are never linked by po. Also, it is by definition +an ordering so it cannot have any cycles. + +po-loc is a sub-relation of po. It links two memory accesses when the +first comes before the second in program order and they access the +same memory location (the "-loc" suffix). + +Although this may seem straightforward, there is one subtle aspect to +program order we need to explain. The LKMM was inspired by low-level +architectural memory models which describe the behavior of machine +code, and it retains their outlook to a considerable extent. The +read, write, and fence events used by the model are close in spirit to +individual machine instructions. Nevertheless, the LKMM describes +kernel code written in C, and the mapping from C to machine code can +be extremely complex. + +Optimizing compilers have great freedom in the way they translate +source code to object code. They are allowed to apply transformations +that add memory accesses, eliminate accesses, combine them, split them +into pieces, or move them around. Faced with all these possibilities, +the LKMM basically gives up. It insists that the code it analyzes +must contain no ordinary accesses to shared memory; all accesses must +be performed using READ_ONCE(), WRITE_ONCE(), or one of the other +atomic or synchronization primitives. These primitives prevent a +large number of compiler optimizations. In particular, it is +guaranteed that the compiler will not remove such accesses from the +generated code (unless it can prove the accesses will never be +executed), it will not change the order in which they occur in the +code (within limits imposed by the C standard), and it will not +introduce extraneous accesses. + +This explains why the MP and SB examples above used READ_ONCE() and +WRITE_ONCE() rather than ordinary memory accesses. Thanks to this +usage, we can be certain that in the MP example, P0's write event to +buf really is po-before its write event to flag, and similarly for the +other shared memory accesses in the examples. + +Private variables are not subject to this restriction. Since they are +not shared between CPUs, they can be accessed normally without +READ_ONCE() or WRITE_ONCE(), and there will be no ill effects. In +fact, they need not even be stored in normal memory at all -- in +principle a private variable could be stored in a CPU register (hence +the convention that these variables have names starting with the +letter 'r'). + + +A WARNING +--------- + +The protections provided by READ_ONCE(), WRITE_ONCE(), and others are +not perfect; and under some circumstances it is possible for the +compiler to undermine the memory model. Here is an example. Suppose +both branches of an "if" statement store the same value to the same +location: + + r1 = READ_ONCE(x); + if (r1) { + WRITE_ONCE(y, 2); + ... /* do something */ + } else { + WRITE_ONCE(y, 2); + ... /* do something else */ + } + +For this code, the LKMM predicts that the load from x will always be +executed before either of the stores to y. However, a compiler could +lift the stores out of the conditional, transforming the code into +something resembling: + + r1 = READ_ONCE(x); + WRITE_ONCE(y, 2); + if (r1) { + ... /* do something */ + } else { + ... /* do something else */ + } + +Given this version of the code, the LKMM would predict that the load +from x could be executed after the store to y. Thus, the memory +model's original prediction could be invalidated by the compiler. + +Another issue arises from the fact that in C, arguments to many +operators and function calls can be evaluated in any order. For +example: + + r1 = f(5) + g(6); + +The object code might call f(5) either before or after g(6); the +memory model cannot assume there is a fixed program order relation +between them. (In fact, if the functions are inlined then the +compiler might even interleave their object code.) + + +DEPENDENCY RELATIONS: data, addr, and ctrl +------------------------------------------ + +We say that two events are linked by a dependency relation when the +execution of the second event depends in some way on a value obtained +from memory by the first. The first event must be a read, and the +value it obtains must somehow affect what the second event does. +There are three kinds of dependencies: data, address (addr), and +control (ctrl). + +A read and a write event are linked by a data dependency if the value +obtained by the read affects the value stored by the write. As a very +simple example: + + int x, y; + + r1 = READ_ONCE(x); + WRITE_ONCE(y, r1 + 5); + +The value stored by the WRITE_ONCE obviously depends on the value +loaded by the READ_ONCE. Such dependencies can wind through +arbitrarily complicated computations, and a write can depend on the +values of multiple reads. + +A read event and another memory access event are linked by an address +dependency if the value obtained by the read affects the location +accessed by the other event. The second event can be either a read or +a write. Here's another simple example: + + int a[20]; + int i; + + r1 = READ_ONCE(i); + r2 = READ_ONCE(a[r1]); + +Here the location accessed by the second READ_ONCE() depends on the +index value loaded by the first. Pointer indirection also gives rise +to address dependencies, since the address of a location accessed +through a pointer will depend on the value read earlier from that +pointer. + +Finally, a read event and another memory access event are linked by a +control dependency if the value obtained by the read affects whether +the second event is executed at all. Simple example: + + int x, y; + + r1 = READ_ONCE(x); + if (r1) + WRITE_ONCE(y, 1984); + +Execution of the WRITE_ONCE() is controlled by a conditional expression +which depends on the value obtained by the READ_ONCE(); hence there is +a control dependency from the load to the store. + +It should be pretty obvious that events can only depend on reads that +come earlier in program order. Symbolically, if we have R ->data X, +R ->addr X, or R ->ctrl X (where R is a read event), then we must also +have R ->po X. It wouldn't make sense for a computation to depend +somehow on a value that doesn't get loaded from shared memory until +later in the code! + + +THE READS-FROM RELATION: rf, rfi, and rfe +----------------------------------------- + +The reads-from relation (rf) links a write event to a read event when +the value loaded by the read is the value that was stored by the +write. In colloquial terms, the load "reads from" the store. We +write W ->rf R to indicate that the load R reads from the store W. We +further distinguish the cases where the load and the store occur on +the same CPU (internal reads-from, or rfi) and where they occur on +different CPUs (external reads-from, or rfe). + +For our purposes, a memory location's initial value is treated as +though it had been written there by an imaginary initial store that +executes on a separate CPU before the program runs. + +Usage of the rf relation implicitly assumes that loads will always +read from a single store. It doesn't apply properly in the presence +of load-tearing, where a load obtains some of its bits from one store +and some of them from another store. Fortunately, use of READ_ONCE() +and WRITE_ONCE() will prevent load-tearing; it's not possible to have: + + int x = 0; + + P0() + { + WRITE_ONCE(x, 0x1234); + } + + P1() + { + int r1; + + r1 = READ_ONCE(x); + } + +and end up with r1 = 0x1200 (partly from x's initial value and partly +from the value stored by P0). + +On the other hand, load-tearing is unavoidable when mixed-size +accesses are used. Consider this example: + + union { + u32 w; + u16 h[2]; + } x; + + P0() + { + WRITE_ONCE(x.h[0], 0x1234); + WRITE_ONCE(x.h[1], 0x5678); + } + + P1() + { + int r1; + + r1 = READ_ONCE(x.w); + } + +If r1 = 0x56781234 (little-endian!) at the end, then P1 must have read +from both of P0's stores. It is possible to handle mixed-size and +unaligned accesses in a memory model, but the LKMM currently does not +attempt to do so. It requires all accesses to be properly aligned and +of the location's actual size. + + +CACHE COHERENCE AND THE COHERENCE ORDER RELATION: co, coi, and coe +------------------------------------------------------------------ + +Cache coherence is a general principle requiring that in a +multi-processor system, the CPUs must share a consistent view of the +memory contents. Specifically, it requires that for each location in +shared memory, the stores to that location must form a single global +ordering which all the CPUs agree on (the coherence order), and this +ordering must be consistent with the program order for accesses to +that location. + +To put it another way, for any variable x, the coherence order (co) of +the stores to x is simply the order in which the stores overwrite one +another. The imaginary store which establishes x's initial value +comes first in the coherence order; the store which directly +overwrites the initial value comes second; the store which overwrites +that value comes third, and so on. + +You can think of the coherence order as being the order in which the +stores reach x's location in memory (or if you prefer a more +hardware-centric view, the order in which the stores get written to +x's cache line). We write W ->co W' if W comes before W' in the +coherence order, that is, if the value stored by W gets overwritten, +directly or indirectly, by the value stored by W'. + +Coherence order is required to be consistent with program order. This +requirement takes the form of four coherency rules: + + Write-write coherence: If W ->po-loc W' (i.e., W comes before + W' in program order and they access the same location), where W + and W' are two stores, then W ->co W'. + + Write-read coherence: If W ->po-loc R, where W is a store and R + is a load, then R must read from W or from some other store + which comes after W in the coherence order. + + Read-write coherence: If R ->po-loc W, where R is a load and W + is a store, then the store which R reads from must come before + W in the coherence order. + + Read-read coherence: If R ->po-loc R', where R and R' are two + loads, then either they read from the same store or else the + store read by R comes before the store read by R' in the + coherence order. + +This is sometimes referred to as sequential consistency per variable, +because it means that the accesses to any single memory location obey +the rules of the Sequential Consistency memory model. (According to +Wikipedia, sequential consistency per variable and cache coherence +mean the same thing except that cache coherence includes an extra +requirement that every store eventually becomes visible to every CPU.) + +Any reasonable memory model will include cache coherence. Indeed, our +expectation of cache coherence is so deeply ingrained that violations +of its requirements look more like hardware bugs than programming +errors: + + int x; + + P0() + { + WRITE_ONCE(x, 17); + WRITE_ONCE(x, 23); + } + +If the final value stored in x after this code ran was 17, you would +think your computer was broken. It would be a violation of the +write-write coherence rule: Since the store of 23 comes later in +program order, it must also come later in x's coherence order and +thus must overwrite the store of 17. + + int x = 0; + + P0() + { + int r1; + + r1 = READ_ONCE(x); + WRITE_ONCE(x, 666); + } + +If r1 = 666 at the end, this would violate the read-write coherence +rule: The READ_ONCE() load comes before the WRITE_ONCE() store in +program order, so it must not read from that store but rather from one +coming earlier in the coherence order (in this case, x's initial +value). + + int x = 0; + + P0() + { + WRITE_ONCE(x, 5); + } + + P1() + { + int r1, r2; + + r1 = READ_ONCE(x); + r2 = READ_ONCE(x); + } + +If r1 = 5 (reading from P0's store) and r2 = 0 (reading from the +imaginary store which establishes x's initial value) at the end, this +would violate the read-read coherence rule: The r1 load comes before +the r2 load in program order, so it must not read from a store that +comes later in the coherence order. + +(As a minor curiosity, if this code had used normal loads instead of +READ_ONCE() in P1, on Itanium it sometimes could end up with r1 = 5 +and r2 = 0! This results from parallel execution of the operations +encoded in Itanium's Very-Long-Instruction-Word format, and it is yet +another motivation for using READ_ONCE() when accessing shared memory +locations.) + +Just like the po relation, co is inherently an ordering -- it is not +possible for a store to directly or indirectly overwrite itself! And +just like with the rf relation, we distinguish between stores that +occur on the same CPU (internal coherence order, or coi) and stores +that occur on different CPUs (external coherence order, or coe). + +On the other hand, stores to different memory locations are never +related by co, just as instructions on different CPUs are never +related by po. Coherence order is strictly per-location, or if you +prefer, each location has its own independent coherence order. + + +THE FROM-READS RELATION: fr, fri, and fre +----------------------------------------- + +The from-reads relation (fr) can be a little difficult for people to +grok. It describes the situation where a load reads a value that gets +overwritten by a store. In other words, we have R ->fr W when the +value that R reads is overwritten (directly or indirectly) by W, or +equivalently, when R reads from a store which comes earlier than W in +the coherence order. + +For example: + + int x = 0; + + P0() + { + int r1; + + r1 = READ_ONCE(x); + WRITE_ONCE(x, 2); + } + +The value loaded from x will be 0 (assuming cache coherence!), and it +gets overwritten by the value 2. Thus there is an fr link from the +READ_ONCE() to the WRITE_ONCE(). If the code contained any later +stores to x, there would also be fr links from the READ_ONCE() to +them. + +As with rf, rfi, and rfe, we subdivide the fr relation into fri (when +the load and the store are on the same CPU) and fre (when they are on +different CPUs). + +Note that the fr relation is determined entirely by the rf and co +relations; it is not independent. Given a read event R and a write +event W for the same location, we will have R ->fr W if and only if +the write which R reads from is co-before W. In symbols, + + (R ->fr W) := (there exists W' with W' ->rf R and W' ->co W). + + +AN OPERATIONAL MODEL +-------------------- + +The LKMM is based on various operational memory models, meaning that +the models arise from an abstract view of how a computer system +operates. Here are the main ideas, as incorporated into the LKMM. + +The system as a whole is divided into the CPUs and a memory subsystem. +The CPUs are responsible for executing instructions (not necessarily +in program order), and they communicate with the memory subsystem. +For the most part, executing an instruction requires a CPU to perform +only internal operations. However, loads, stores, and fences involve +more. + +When CPU C executes a store instruction, it tells the memory subsystem +to store a certain value at a certain location. The memory subsystem +propagates the store to all the other CPUs as well as to RAM. (As a +special case, we say that the store propagates to its own CPU at the +time it is executed.) The memory subsystem also determines where the +store falls in the location's coherence order. In particular, it must +arrange for the store to be co-later than (i.e., to overwrite) any +other store to the same location which has already propagated to CPU C. + +When a CPU executes a load instruction R, it first checks to see +whether there are any as-yet unexecuted store instructions, for the +same location, that come before R in program order. If there are, it +uses the value of the po-latest such store as the value obtained by R, +and we say that the store's value is forwarded to R. Otherwise, the +CPU asks the memory subsystem for the value to load and we say that R +is satisfied from memory. The memory subsystem hands back the value +of the co-latest store to the location in question which has already +propagated to that CPU. + +(In fact, the picture needs to be a little more complicated than this. +CPUs have local caches, and propagating a store to a CPU really means +propagating it to the CPU's local cache. A local cache can take some +time to process the stores that it receives, and a store can't be used +to satisfy one of the CPU's loads until it has been processed. On +most architectures, the local caches process stores in +First-In-First-Out order, and consequently the processing delay +doesn't matter for the memory model. But on Alpha, the local caches +have a partitioned design that results in non-FIFO behavior. We will +discuss this in more detail later.) + +Note that load instructions may be executed speculatively and may be +restarted under certain circumstances. The memory model ignores these +premature executions; we simply say that the load executes at the +final time it is forwarded or satisfied. + +Executing a fence (or memory barrier) instruction doesn't require a +CPU to do anything special other than informing the memory subsystem +about the fence. However, fences do constrain the way CPUs and the +memory subsystem handle other instructions, in two respects. + +First, a fence forces the CPU to execute various instructions in +program order. Exactly which instructions are ordered depends on the +type of fence: + + Strong fences, including smp_mb() and synchronize_rcu(), force + the CPU to execute all po-earlier instructions before any + po-later instructions; + + smp_rmb() forces the CPU to execute all po-earlier loads + before any po-later loads; + + smp_wmb() forces the CPU to execute all po-earlier stores + before any po-later stores; + + Acquire fences, such as smp_load_acquire(), force the CPU to + execute the load associated with the fence (e.g., the load + part of an smp_load_acquire()) before any po-later + instructions; + + Release fences, such as smp_store_release(), force the CPU to + execute all po-earlier instructions before the store + associated with the fence (e.g., the store part of an + smp_store_release()). + +Second, some types of fence affect the way the memory subsystem +propagates stores. When a fence instruction is executed on CPU C: + + For each other CPU C', smb_wmb() forces all po-earlier stores + on C to propagate to C' before any po-later stores do. + + For each other CPU C', any store which propagates to C before + a release fence is executed (including all po-earlier + stores executed on C) is forced to propagate to C' before the + store associated with the release fence does. + + Any store which propagates to C before a strong fence is + executed (including all po-earlier stores on C) is forced to + propagate to all other CPUs before any instructions po-after + the strong fence are executed on C. + +The propagation ordering enforced by release fences and strong fences +affects stores from other CPUs that propagate to CPU C before the +fence is executed, as well as stores that are executed on C before the +fence. We describe this property by saying that release fences and +strong fences are A-cumulative. By contrast, smp_wmb() fences are not +A-cumulative; they only affect the propagation of stores that are +executed on C before the fence (i.e., those which precede the fence in +program order). + +smp_read_barrier_depends(), rcu_read_lock(), rcu_read_unlock(), and +synchronize_rcu() fences have other properties which we discuss later. + + +PROPAGATION ORDER RELATION: cumul-fence +--------------------------------------- + +The fences which affect propagation order (i.e., strong, release, and +smp_wmb() fences) are collectively referred to as cumul-fences, even +though smp_wmb() isn't A-cumulative. The cumul-fence relation is +defined to link memory access events E and F whenever: + + E and F are both stores on the same CPU and an smp_wmb() fence + event occurs between them in program order; or + + F is a release fence and some X comes before F in program order, + where either X = E or else E ->rf X; or + + A strong fence event occurs between some X and F in program + order, where either X = E or else E ->rf X. + +The operational model requires that whenever W and W' are both stores +and W ->cumul-fence W', then W must propagate to any given CPU +before W' does. However, for different CPUs C and C', it does not +require W to propagate to C before W' propagates to C'. + + +DERIVATION OF THE LKMM FROM THE OPERATIONAL MODEL +------------------------------------------------- + +The LKMM is derived from the restrictions imposed by the design +outlined above. These restrictions involve the necessity of +maintaining cache coherence and the fact that a CPU can't operate on a +value before it knows what that value is, among other things. + +The formal version of the LKMM is defined by five requirements, or +axioms: + + Sequential consistency per variable: This requires that the + system obey the four coherency rules. + + Atomicity: This requires that atomic read-modify-write + operations really are atomic, that is, no other stores can + sneak into the middle of such an update. + + Happens-before: This requires that certain instructions are + executed in a specific order. + + Propagation: This requires that certain stores propagate to + CPUs and to RAM in a specific order. + + Rcu: This requires that RCU read-side critical sections and + grace periods obey the rules of RCU, in particular, the + Grace-Period Guarantee. + +The first and second are quite common; they can be found in many +memory models (such as those for C11/C++11). The "happens-before" and +"propagation" axioms have analogs in other memory models as well. The +"rcu" axiom is specific to the LKMM. + +Each of these axioms is discussed below. + + +SEQUENTIAL CONSISTENCY PER VARIABLE +----------------------------------- + +According to the principle of cache coherence, the stores to any fixed +shared location in memory form a global ordering. We can imagine +inserting the loads from that location into this ordering, by placing +each load between the store that it reads from and the following +store. This leaves the relative positions of loads that read from the +same store unspecified; let's say they are inserted in program order, +first for CPU 0, then CPU 1, etc. + +You can check that the four coherency rules imply that the rf, co, fr, +and po-loc relations agree with this global ordering; in other words, +whenever we have X ->rf Y or X ->co Y or X ->fr Y or X ->po-loc Y, the +X event comes before the Y event in the global ordering. The LKMM's +"coherence" axiom expresses this by requiring the union of these +relations not to have any cycles. This means it must not be possible +to find events + + X0 -> X1 -> X2 -> ... -> Xn -> X0, + +where each of the links is either rf, co, fr, or po-loc. This has to +hold if the accesses to the fixed memory location can be ordered as +cache coherence demands. + +Although it is not obvious, it can be shown that the converse is also +true: This LKMM axiom implies that the four coherency rules are +obeyed. + + +ATOMIC UPDATES: rmw +------------------- + +What does it mean to say that a read-modify-write (rmw) update, such +as atomic_inc(&x), is atomic? It means that the memory location (x in +this case) does not get altered between the read and the write events +making up the atomic operation. In particular, if two CPUs perform +atomic_inc(&x) concurrently, it must be guaranteed that the final +value of x will be the initial value plus two. We should never have +the following sequence of events: + + CPU 0 loads x obtaining 13; + CPU 1 loads x obtaining 13; + CPU 0 stores 14 to x; + CPU 1 stores 14 to x; + +where the final value of x is wrong (14 rather than 15). + +In this example, CPU 0's increment effectively gets lost because it +occurs in between CPU 1's load and store. To put it another way, the +problem is that the position of CPU 0's store in x's coherence order +is between the store that CPU 1 reads from and the store that CPU 1 +performs. + +The same analysis applies to all atomic update operations. Therefore, +to enforce atomicity the LKMM requires that atomic updates follow this +rule: Whenever R and W are the read and write events composing an +atomic read-modify-write and W' is the write event which R reads from, +there must not be any stores coming between W' and W in the coherence +order. Equivalently, + + (R ->rmw W) implies (there is no X with R ->fr X and X ->co W), + +where the rmw relation links the read and write events making up each +atomic update. This is what the LKMM's "atomic" axiom says. + + +THE PRESERVED PROGRAM ORDER RELATION: ppo +----------------------------------------- + +There are many situations where a CPU is obligated to execute two +instructions in program order. We amalgamate them into the ppo (for +"preserved program order") relation, which links the po-earlier +instruction to the po-later instruction and is thus a sub-relation of +po. + +The operational model already includes a description of one such +situation: Fences are a source of ppo links. Suppose X and Y are +memory accesses with X ->po Y; then the CPU must execute X before Y if +any of the following hold: + + A strong (smp_mb() or synchronize_rcu()) fence occurs between + X and Y; + + X and Y are both stores and an smp_wmb() fence occurs between + them; + + X and Y are both loads and an smp_rmb() fence occurs between + them; + + X is also an acquire fence, such as smp_load_acquire(); + + Y is also a release fence, such as smp_store_release(). + +Another possibility, not mentioned earlier but discussed in the next +section, is: + + X and Y are both loads, X ->addr Y (i.e., there is an address + dependency from X to Y), and an smp_read_barrier_depends() + fence occurs between them. + +Dependencies can also cause instructions to be executed in program +order. This is uncontroversial when the second instruction is a +store; either a data, address, or control dependency from a load R to +a store W will force the CPU to execute R before W. This is very +simply because the CPU cannot tell the memory subsystem about W's +store before it knows what value should be stored (in the case of a +data dependency), what location it should be stored into (in the case +of an address dependency), or whether the store should actually take +place (in the case of a control dependency). + +Dependencies to load instructions are more problematic. To begin with, +there is no such thing as a data dependency to a load. Next, a CPU +has no reason to respect a control dependency to a load, because it +can always satisfy the second load speculatively before the first, and +then ignore the result if it turns out that the second load shouldn't +be executed after all. And lastly, the real difficulties begin when +we consider address dependencies to loads. + +To be fair about it, all Linux-supported architectures do execute +loads in program order if there is an address dependency between them. +After all, a CPU cannot ask the memory subsystem to load a value from +a particular location before it knows what that location is. However, +the split-cache design used by Alpha can cause it to behave in a way +that looks as if the loads were executed out of order (see the next +section for more details). For this reason, the LKMM does not include +address dependencies between read events in the ppo relation unless an +smp_read_barrier_depends() fence is present. + +On the other hand, dependencies can indirectly affect the ordering of +two loads. This happens when there is a dependency from a load to a +store and a second, po-later load reads from that store: + + R ->dep W ->rfi R', + +where the dep link can be either an address or a data dependency. In +this situation we know it is possible for the CPU to execute R' before +W, because it can forward the value that W will store to R'. But it +cannot execute R' before R, because it cannot forward the value before +it knows what that value is, or that W and R' do access the same +location. However, if there is merely a control dependency between R +and W then the CPU can speculatively forward W to R' before executing +R; if the speculation turns out to be wrong then the CPU merely has to +restart or abandon R'. + +(In theory, a CPU might forward a store to a load when it runs across +an address dependency like this: + + r1 = READ_ONCE(ptr); + WRITE_ONCE(*r1, 17); + r2 = READ_ONCE(*r1); + +because it could tell that the store and the second load access the +same location even before it knows what the location's address is. +However, none of the architectures supported by the Linux kernel do +this.) + +Two memory accesses of the same location must always be executed in +program order if the second access is a store. Thus, if we have + + R ->po-loc W + +(the po-loc link says that R comes before W in program order and they +access the same location), the CPU is obliged to execute W after R. +If it executed W first then the memory subsystem would respond to R's +read request with the value stored by W (or an even later store), in +violation of the read-write coherence rule. Similarly, if we had + + W ->po-loc W' + +and the CPU executed W' before W, then the memory subsystem would put +W' before W in the coherence order. It would effectively cause W to +overwrite W', in violation of the write-write coherence rule. +(Interestingly, an early ARMv8 memory model, now obsolete, proposed +allowing out-of-order writes like this to occur. The model avoided +violating the write-write coherence rule by requiring the CPU not to +send the W write to the memory subsystem at all!) + +There is one last example of preserved program order in the LKMM: when +a load-acquire reads from an earlier store-release. For example: + + smp_store_release(&x, 123); + r1 = smp_load_acquire(&x); + +If the smp_load_acquire() ends up obtaining the 123 value that was +stored by the smp_store_release(), the LKMM says that the load must be +executed after the store; the store cannot be forwarded to the load. +This requirement does not arise from the operational model, but it +yields correct predictions on all architectures supported by the Linux +kernel, although for differing reasons. + +On some architectures, including x86 and ARMv8, it is true that the +store cannot be forwarded to the load. On others, including PowerPC +and ARMv7, smp_store_release() generates object code that starts with +a fence and smp_load_acquire() generates object code that ends with a +fence. The upshot is that even though the store may be forwarded to +the load, it is still true that any instruction preceding the store +will be executed before the load or any following instructions, and +the store will be executed before any instruction following the load. + + +AND THEN THERE WAS ALPHA +------------------------ + +As mentioned above, the Alpha architecture is unique in that it does +not appear to respect address dependencies to loads. This means that +code such as the following: + + int x = 0; + int y = -1; + int *ptr = &y; + + P0() + { + WRITE_ONCE(x, 1); + smp_wmb(); + WRITE_ONCE(ptr, &x); + } + + P1() + { + int *r1; + int r2; + + r1 = READ_ONCE(ptr); + r2 = READ_ONCE(*r1); + } + +can malfunction on Alpha systems. It is quite possible that r1 = &x +and r2 = 0 at the end, in spite of the address dependency. + +At first glance this doesn't seem to make sense. We know that the +smp_wmb() forces P0's store to x to propagate to P1 before the store +to ptr does. And since P1 can't execute its second load +until it knows what location to load from, i.e., after executing its +first load, the value x = 1 must have propagated to P1 before the +second load executed. So why doesn't r2 end up equal to 1? + +The answer lies in the Alpha's split local caches. Although the two +stores do reach P1's local cache in the proper order, it can happen +that the first store is processed by a busy part of the cache while +the second store is processed by an idle part. As a result, the x = 1 +value may not become available for P1's CPU to read until after the +ptr = &x value does, leading to the undesirable result above. The +final effect is that even though the two loads really are executed in +program order, it appears that they aren't. + +This could not have happened if the local cache had processed the +incoming stores in FIFO order. In constrast, other architectures +maintain at least the appearance of FIFO order. + +In practice, this difficulty is solved by inserting an +smp_read_barrier_depends() fence between P1's two loads. The effect +of this fence is to cause the CPU not to execute any po-later +instructions until after the local cache has finished processing all +the stores it has already received. Thus, if the code was changed to: + + P1() + { + int *r1; + int r2; + + r1 = READ_ONCE(ptr); + smp_read_barrier_depends(); + r2 = READ_ONCE(*r1); + } + +then we would never get r1 = &x and r2 = 0. By the time P1 executed +its second load, the x = 1 store would already be fully processed by +the local cache and available for satisfying the read request. + +The LKMM requires that smp_rmb(), acquire fences, and strong fences +share this property with smp_read_barrier_depends(): They do not allow +the CPU to execute any po-later instructions (or po-later loads in the +case of smp_rmb()) until all outstanding stores have been processed by +the local cache. In the case of a strong fence, the CPU first has to +wait for all of its po-earlier stores to propagate to every other CPU +in the system; then it has to wait for the local cache to process all +the stores received as of that time -- not just the stores received +when the strong fence began. + +And of course, none of this matters for any architecture other than +Alpha. + + +THE HAPPENS-BEFORE RELATION: hb +------------------------------- + +The happens-before relation (hb) links memory accesses that have to +execute in a certain order. hb includes the ppo relation and two +others, one of which is rfe. + +W ->rfe R implies that W and R are on different CPUs. It also means +that W's store must have propagated to R's CPU before R executed; +otherwise R could not have read the value stored by W. Therefore W +must have executed before R, and so we have W ->hb R. + +The equivalent fact need not hold if W ->rfi R (i.e., W and R are on +the same CPU). As we have already seen, the operational model allows +W's value to be forwarded to R in such cases, meaning that R may well +execute before W does. + +It's important to understand that neither coe nor fre is included in +hb, despite their similarities to rfe. For example, suppose we have +W ->coe W'. This means that W and W' are stores to the same location, +they execute on different CPUs, and W comes before W' in the coherence +order (i.e., W' overwrites W). Nevertheless, it is possible for W' to +execute before W, because the decision as to which store overwrites +the other is made later by the memory subsystem. When the stores are +nearly simultaneous, either one can come out on top. Similarly, +R ->fre W means that W overwrites the value which R reads, but it +doesn't mean that W has to execute after R. All that's necessary is +for the memory subsystem not to propagate W to R's CPU until after R +has executed, which is possible if W executes shortly before R. + +The third relation included in hb is like ppo, in that it only links +events that are on the same CPU. However it is more difficult to +explain, because it arises only indirectly from the requirement of +cache coherence. The relation is called prop, and it links two events +on CPU C in situations where a store from some other CPU comes after +the first event in the coherence order and propagates to C before the +second event executes. + +This is best explained with some examples. The simplest case looks +like this: + + int x; + + P0() + { + int r1; + + WRITE_ONCE(x, 1); + r1 = READ_ONCE(x); + } + + P1() + { + WRITE_ONCE(x, 8); + } + +If r1 = 8 at the end then P0's accesses must have executed in program +order. We can deduce this from the operational model; if P0's load +had executed before its store then the value of the store would have +been forwarded to the load, so r1 would have ended up equal to 1, not +8. In this case there is a prop link from P0's write event to its read +event, because P1's store came after P0's store in x's coherence +order, and P1's store propagated to P0 before P0's load executed. + +An equally simple case involves two loads of the same location that +read from different stores: + + int x = 0; + + P0() + { + int r1, r2; + + r1 = READ_ONCE(x); + r2 = READ_ONCE(x); + } + + P1() + { + WRITE_ONCE(x, 9); + } + +If r1 = 0 and r2 = 9 at the end then P0's accesses must have executed +in program order. If the second load had executed before the first +then the x = 9 store must have been propagated to P0 before the first +load executed, and so r1 would have been 9 rather than 0. In this +case there is a prop link from P0's first read event to its second, +because P1's store overwrote the value read by P0's first load, and +P1's store propagated to P0 before P0's second load executed. + +Less trivial examples of prop all involve fences. Unlike the simple +examples above, they can require that some instructions are executed +out of program order. This next one should look familiar: + + int buf = 0, flag = 0; + + P0() + { + WRITE_ONCE(buf, 1); + smp_wmb(); + WRITE_ONCE(flag, 1); + } + + P1() + { + int r1; + int r2; + + r1 = READ_ONCE(flag); + r2 = READ_ONCE(buf); + } + +This is the MP pattern again, with an smp_wmb() fence between the two +stores. If r1 = 1 and r2 = 0 at the end then there is a prop link +from P1's second load to its first (backwards!). The reason is +similar to the previous examples: The value P1 loads from buf gets +overwritten by P0's store to buf, the fence guarantees that the store +to buf will propagate to P1 before the store to flag does, and the +store to flag propagates to P1 before P1 reads flag. + +The prop link says that in order to obtain the r1 = 1, r2 = 0 result, +P1 must execute its second load before the first. Indeed, if the load +from flag were executed first, then the buf = 1 store would already +have propagated to P1 by the time P1's load from buf executed, so r2 +would have been 1 at the end, not 0. (The reasoning holds even for +Alpha, although the details are more complicated and we will not go +into them.) + +But what if we put an smp_rmb() fence between P1's loads? The fence +would force the two loads to be executed in program order, and it +would generate a cycle in the hb relation: The fence would create a ppo +link (hence an hb link) from the first load to the second, and the +prop relation would give an hb link from the second load to the first. +Since an instruction can't execute before itself, we are forced to +conclude that if an smp_rmb() fence is added, the r1 = 1, r2 = 0 +outcome is impossible -- as it should be. + +The formal definition of the prop relation involves a coe or fre link, +followed by an arbitrary number of cumul-fence links, ending with an +rfe link. You can concoct more exotic examples, containing more than +one fence, although this quickly leads to diminishing returns in terms +of complexity. For instance, here's an example containing a coe link +followed by two fences and an rfe link, utilizing the fact that +release fences are A-cumulative: + + int x, y, z; + + P0() + { + int r0; + + WRITE_ONCE(x, 1); + r0 = READ_ONCE(z); + } + + P1() + { + WRITE_ONCE(x, 2); + smp_wmb(); + WRITE_ONCE(y, 1); + } + + P2() + { + int r2; + + r2 = READ_ONCE(y); + smp_store_release(&z, 1); + } + +If x = 2, r0 = 1, and r2 = 1 after this code runs then there is a prop +link from P0's store to its load. This is because P0's store gets +overwritten by P1's store since x = 2 at the end (a coe link), the +smp_wmb() ensures that P1's store to x propagates to P2 before the +store to y does (the first fence), the store to y propagates to P2 +before P2's load and store execute, P2's smp_store_release() +guarantees that the stores to x and y both propagate to P0 before the +store to z does (the second fence), and P0's load executes after the +store to z has propagated to P0 (an rfe link). + +In summary, the fact that the hb relation links memory access events +in the order they execute means that it must not have cycles. This +requirement is the content of the LKMM's "happens-before" axiom. + +The LKMM defines yet another relation connected to times of +instruction execution, but it is not included in hb. It relies on the +particular properties of strong fences, which we cover in the next +section. + + +THE PROPAGATES-BEFORE RELATION: pb +---------------------------------- + +The propagates-before (pb) relation capitalizes on the special +features of strong fences. It links two events E and F whenever some +store is coherence-later than E and propagates to every CPU and to RAM +before F executes. The formal definition requires that E be linked to +F via a coe or fre link, an arbitrary number of cumul-fences, an +optional rfe link, a strong fence, and an arbitrary number of hb +links. Let's see how this definition works out. + +Consider first the case where E is a store (implying that the sequence +of links begins with coe). Then there are events W, X, Y, and Z such +that: + + E ->coe W ->cumul-fence* X ->rfe? Y ->strong-fence Z ->hb* F, + +where the * suffix indicates an arbitrary number of links of the +specified type, and the ? suffix indicates the link is optional (Y may +be equal to X). Because of the cumul-fence links, we know that W will +propagate to Y's CPU before X does, hence before Y executes and hence +before the strong fence executes. Because this fence is strong, we +know that W will propagate to every CPU and to RAM before Z executes. +And because of the hb links, we know that Z will execute before F. +Thus W, which comes later than E in the coherence order, will +propagate to every CPU and to RAM before F executes. + +The case where E is a load is exactly the same, except that the first +link in the sequence is fre instead of coe. + +The existence of a pb link from E to F implies that E must execute +before F. To see why, suppose that F executed first. Then W would +have propagated to E's CPU before E executed. If E was a store, the +memory subsystem would then be forced to make E come after W in the +coherence order, contradicting the fact that E ->coe W. If E was a +load, the memory subsystem would then be forced to satisfy E's read +request with the value stored by W or an even later store, +contradicting the fact that E ->fre W. + +A good example illustrating how pb works is the SB pattern with strong +fences: + + int x = 0, y = 0; + + P0() + { + int r0; + + WRITE_ONCE(x, 1); + smp_mb(); + r0 = READ_ONCE(y); + } + + P1() + { + int r1; + + WRITE_ONCE(y, 1); + smp_mb(); + r1 = READ_ONCE(x); + } + +If r0 = 0 at the end then there is a pb link from P0's load to P1's +load: an fre link from P0's load to P1's store (which overwrites the +value read by P0), and a strong fence between P1's store and its load. +In this example, the sequences of cumul-fence and hb links are empty. +Note that this pb link is not included in hb as an instance of prop, +because it does not start and end on the same CPU. + +Similarly, if r1 = 0 at the end then there is a pb link from P1's load +to P0's. This means that if both r1 and r2 were 0 there would be a +cycle in pb, which is not possible since an instruction cannot execute +before itself. Thus, adding smp_mb() fences to the SB pattern +prevents the r0 = 0, r1 = 0 outcome. + +In summary, the fact that the pb relation links events in the order +they execute means that it cannot have cycles. This requirement is +the content of the LKMM's "propagation" axiom. + + +RCU RELATIONS: link, gp-link, rscs-link, and rcu-path +----------------------------------------------------- + +RCU (Read-Copy-Update) is a powerful synchronization mechanism. It +rests on two concepts: grace periods and read-side critical sections. + +A grace period is the span of time occupied by a call to +synchronize_rcu(). A read-side critical section (or just critical +section, for short) is a region of code delimited by rcu_read_lock() +at the start and rcu_read_unlock() at the end. Critical sections can +be nested, although we won't make use of this fact. + +As far as memory models are concerned, RCU's main feature is its +Grace-Period Guarantee, which states that a critical section can never +span a full grace period. In more detail, the Guarantee says: + + If a critical section starts before a grace period then it + must end before the grace period does. In addition, every + store that propagates to the critical section's CPU before the + end of the critical section must propagate to every CPU before + the end of the grace period. + + If a critical section ends after a grace period ends then it + must start after the grace period does. In addition, every + store that propagates to the grace period's CPU before the + start of the grace period must propagate to every CPU before + the start of the critical section. + +Here is a simple example of RCU in action: + + int x, y; + + P0() + { + rcu_read_lock(); + WRITE_ONCE(x, 1); + WRITE_ONCE(y, 1); + rcu_read_unlock(); + } + + P1() + { + int r1, r2; + + r1 = READ_ONCE(x); + synchronize_rcu(); + r2 = READ_ONCE(y); + } + +The Grace Period Guarantee tells us that when this code runs, it will +never end with r1 = 1 and r2 = 0. The reasoning is as follows. r1 = 1 +means that P0's store to x propagated to P1 before P1 called +synchronize_rcu(), so P0's critical section must have started before +P1's grace period. On the other hand, r2 = 0 means that P0's store to +y, which occurs before the end of the critical section, did not +propagate to P1 before the end of the grace period, violating the +Guarantee. + +In the kernel's implementations of RCU, the business about stores +propagating to every CPU is realized by placing strong fences at +suitable places in the RCU-related code. Thus, if a critical section +starts before a grace period does then the critical section's CPU will +execute an smp_mb() fence after the end of the critical section and +some time before the grace period's synchronize_rcu() call returns. +And if a critical section ends after a grace period does then the +synchronize_rcu() routine will execute an smp_mb() fence at its start +and some time before the critical section's opening rcu_read_lock() +executes. + +What exactly do we mean by saying that a critical section "starts +before" or "ends after" a grace period? Some aspects of the meaning +are pretty obvious, as in the example above, but the details aren't +entirely clear. The LKMM formalizes this notion by means of a +relation with the unfortunately generic name "link". It is a very +general relation; among other things, X ->link Z includes cases where +X happens-before or is equal to some event Y which is equal to or +comes before Z in the coherence order. Taking Y = Z, this says that +X ->rfe Z implies X ->link Z, and taking Y = X, it says that X ->fr Z +and X ->co Z each imply X ->link Z. + +The formal definition of the link relation is more than a little +obscure, and we won't give it here. It is closely related to the pb +relation, and the details don't matter unless you want to comb through +a somewhat lengthy formal proof. Pretty much all you need to know +about link is the information in the preceding paragraph. + +The LKMM goes on to define the gp-link and rscs-link relations. They +bring grace periods and read-side critical sections into the picture, +in the following way: + + E ->gp-link F means there is a synchronize_rcu() fence event S + and an event X such that E ->po S, either S ->po X or S = X, + and X ->link F. In other words, E and F are connected by a + grace period followed by an instance of link. + + E ->rscs-link F means there is a critical section delimited by + an rcu_read_lock() fence L and an rcu_read_unlock() fence U, + and an event X such that E ->po U, either L ->po X or L = X, + and X ->link F. Roughly speaking, this says that some event + in the same critical section as E is connected by link to F. + +If we think of the link relation as standing for an extended "before", +then E ->gp-link F says that E executes before a grace period which +ends before F executes. (In fact it says more than this, because it +includes cases where E executes before a grace period and some store +propagates to F's CPU before F executes and doesn't propagate to some +other CPU until after the grace period ends.) Similarly, +E ->rscs-link F says that E is part of (or before the start of) a +critical section which starts before F executes. + +Putting this all together, the LKMM expresses the Grace Period +Guarantee by requiring that there are no cycles consisting of gp-link +and rscs-link connections in which the number of gp-link instances is +>= the number of rscs-link instances. It does this by defining the +rcu-path relation to link events E and F whenever it is possible to +pass from E to F by a sequence of gp-link and rscs-link connections +with at least as many of the former as the latter. The LKMM's "rcu" +axiom then says that there are no events E such that E ->rcu-path E. + +Justifying this axiom takes some intellectual effort, but it is in +fact a valid formalization of the Grace Period Guarantee. We won't +attempt to go through the detailed argument, but the following +analysis gives a taste of what is involved. Suppose we have a +violation of the first part of the Guarantee: A critical section +starts before a grace period, and some store propagates to the +critical section's CPU before the end of the critical section but +doesn't propagate to some other CPU until after the end of the grace +period. + +Putting symbols to these ideas, let L and U be the rcu_read_lock() and +rcu_read_unlock() fence events delimiting the critical section in +question, and let S be the synchronize_rcu() fence event for the grace +period. Saying that the critical section starts before S means there +are events E and F where E is po-after L (which marks the start of the +critical section), E is "before" F in the sense of the link relation, +and F is po-before the grace period S: + + L ->po E ->link F ->po S. + +Let W be the store mentioned above, let Z come before the end of the +critical section and witness that W propagates to the critical +section's CPU by reading from W, and let Y on some arbitrary CPU be a +witness that W has not propagated to that CPU, where Y happens after +some event X which is po-after S. Symbolically, this amounts to: + + S ->po X ->hb* Y ->fr W ->rf Z ->po U. + +The fr link from Y to W indicates that W has not propagated to Y's CPU +at the time that Y executes. From this, it can be shown (see the +discussion of the link relation earlier) that X and Z are connected by +link, yielding: + + S ->po X ->link Z ->po U. + +These formulas say that S is po-between F and X, hence F ->gp-link Z +via X. They also say that Z comes before the end of the critical +section and E comes after its start, hence Z ->rscs-link F via E. But +now we have a forbidden cycle: F ->gp-link Z ->rscs-link F. Thus the +"rcu" axiom rules out this violation of the Grace Period Guarantee. + +For something a little more down-to-earth, let's see how the axiom +works out in practice. Consider the RCU code example from above, this +time with statement labels added to the memory access instructions: + + int x, y; + + P0() + { + rcu_read_lock(); + W: WRITE_ONCE(x, 1); + X: WRITE_ONCE(y, 1); + rcu_read_unlock(); + } + + P1() + { + int r1, r2; + + Y: r1 = READ_ONCE(x); + synchronize_rcu(); + Z: r2 = READ_ONCE(y); + } + + +If r2 = 0 at the end then P0's store at X overwrites the value +that P1's load at Z reads from, so we have Z ->fre X and thus +Z ->link X. In addition, there is a synchronize_rcu() between Y and +Z, so therefore we have Y ->gp-link X. + +If r1 = 1 at the end then P1's load at Y reads from P0's store at W, +so we have W ->link Y. In addition, W and X are in the same critical +section, so therefore we have X ->rscs-link Y. + +This gives us a cycle, Y ->gp-link X ->rscs-link Y, with one gp-link +and one rscs-link, violating the "rcu" axiom. Hence the outcome is +not allowed by the LKMM, as we would expect. + +For contrast, let's see what can happen in a more complicated example: + + int x, y, z; + + P0() + { + int r0; + + rcu_read_lock(); + W: r0 = READ_ONCE(x); + X: WRITE_ONCE(y, 1); + rcu_read_unlock(); + } + + P1() + { + int r1; + + Y: r1 = READ_ONCE(y); + synchronize_rcu(); + Z: WRITE_ONCE(z, 1); + } + + P2() + { + int r2; + + rcu_read_lock(); + U: r2 = READ_ONCE(z); + V: WRITE_ONCE(x, 1); + rcu_read_unlock(); + } + +If r0 = r1 = r2 = 1 at the end, then similar reasoning to before shows +that W ->rscs-link Y via X, Y ->gp-link U via Z, and U ->rscs-link W +via V. And just as before, this gives a cycle: + + W ->rscs-link Y ->gp-link U ->rscs-link W. + +However, this cycle has fewer gp-link instances than rscs-link +instances, and consequently the outcome is not forbidden by the LKMM. +The following instruction timing diagram shows how it might actually +occur: + +P0 P1 P2 +-------------------- -------------------- -------------------- +rcu_read_lock() +X: WRITE_ONCE(y, 1) + Y: r1 = READ_ONCE(y) + synchronize_rcu() starts + . rcu_read_lock() + . V: WRITE_ONCE(x, 1) +W: r0 = READ_ONCE(x) . +rcu_read_unlock() . + synchronize_rcu() ends + Z: WRITE_ONCE(z, 1) + U: r2 = READ_ONCE(z) + rcu_read_unlock() + +This requires P0 and P2 to execute their loads and stores out of +program order, but of course they are allowed to do so. And as you +can see, the Grace Period Guarantee is not violated: The critical +section in P0 both starts before P1's grace period does and ends +before it does, and the critical section in P2 both starts after P1's +grace period does and ends after it does. + + +ODDS AND ENDS +------------- + +This section covers material that didn't quite fit anywhere in the +earlier sections. + +The descriptions in this document don't always match the formal +version of the LKMM exactly. For example, the actual formal +definition of the prop relation makes the initial coe or fre part +optional, and it doesn't require the events linked by the relation to +be on the same CPU. These differences are very unimportant; indeed, +instances where the coe/fre part of prop is missing are of no interest +because all the other parts (fences and rfe) are already included in +hb anyway, and where the formal model adds prop into hb, it includes +an explicit requirement that the events being linked are on the same +CPU. + +Another minor difference has to do with events that are both memory +accesses and fences, such as those corresponding to smp_load_acquire() +calls. In the formal model, these events aren't actually both reads +and fences; rather, they are read events with an annotation marking +them as acquires. (Or write events annotated as releases, in the case +smp_store_release().) The final effect is the same. + +Although we didn't mention it above, the instruction execution +ordering provided by the smp_rmb() fence doesn't apply to read events +that are part of a non-value-returning atomic update. For instance, +given: + + atomic_inc(&x); + smp_rmb(); + r1 = READ_ONCE(y); + +it is not guaranteed that the load from y will execute after the +update to x. This is because the ARMv8 architecture allows +non-value-returning atomic operations effectively to be executed off +the CPU. Basically, the CPU tells the memory subsystem to increment +x, and then the increment is carried out by the memory hardware with +no further involvement from the CPU. Since the CPU doesn't ever read +the value of x, there is nothing for the smp_rmb() fence to act on. + +The LKMM defines a few extra synchronization operations in terms of +things we have already covered. In particular, rcu_dereference() and +lockless_dereference() are both treated as a READ_ONCE() followed by +smp_read_barrier_depends() -- which also happens to be how they are +defined in include/linux/rcupdate.h and include/linux/compiler.h, +respectively. + +There are a few oddball fences which need special treatment: +smp_mb__before_atomic(), smp_mb__after_atomic(), and +smp_mb__after_spinlock(). The LKMM uses fence events with special +annotations for them; they act as strong fences just like smp_mb() +except for the sets of events that they order. Instead of ordering +all po-earlier events against all po-later events, as smp_mb() does, +they behave as follows: + + smp_mb__before_atomic() orders all po-earlier events against + po-later atomic updates and the events following them; + + smp_mb__after_atomic() orders po-earlier atomic updates and + the events preceding them against all po-later events; + + smp_mb_after_spinlock() orders po-earlier lock acquisition + events and the events preceding them against all po-later + events. + +The LKMM includes locking. In fact, there is special code for locking +in the formal model, added in order to make tools run faster. +However, this special code is intended to be exactly equivalent to +concepts we have already covered. A spinlock_t variable is treated +the same as an int, and spin_lock(&s) is treated the same as: + + while (cmpxchg_acquire(&s, 0, 1) != 0) + cpu_relax(); + +which waits until s is equal to 0 and then atomically sets it to 1, +and where the read part of the atomic update is also an acquire fence. +An alternate way to express the same thing would be: + + r = xchg_acquire(&s, 1); + +along with a requirement that at the end, r = 0. spin_unlock(&s) is +treated the same as: + + smp_store_release(&s, 0); + +Interestingly, RCU and locking each introduce the possibility of +deadlock. When faced with code sequences such as: + + spin_lock(&s); + spin_lock(&s); + spin_unlock(&s); + spin_unlock(&s); + +or: + + rcu_read_lock(); + synchronize_rcu(); + rcu_read_unlock(); + +what does the LKMM have to say? Answer: It says there are no allowed +executions at all, which makes sense. But this can also lead to +misleading results, because if a piece of code has multiple possible +executions, some of which deadlock, the model will report only on the +non-deadlocking executions. For example: + + int x, y; + + P0() + { + int r0; + + WRITE_ONCE(x, 1); + r0 = READ_ONCE(y); + } + + P1() + { + rcu_read_lock(); + if (READ_ONCE(x) > 0) { + WRITE_ONCE(y, 36); + synchronize_rcu(); + } + rcu_read_unlock(); + } + +Is it possible to end up with r0 = 36 at the end? The LKMM will tell +you it is not, but the model won't mention that this is because P1 +will self-deadlock in the executions where it stores 36 in y. diff --git a/tools/memory-model/Documentation/recipes.txt b/tools/memory-model/Documentation/recipes.txt new file mode 100644 index 000000000000..ee4309a87fc4 --- /dev/null +++ b/tools/memory-model/Documentation/recipes.txt @@ -0,0 +1,570 @@ +This document provides "recipes", that is, litmus tests for commonly +occurring situations, as well as a few that illustrate subtly broken but +attractive nuisances. Many of these recipes include example code from +v4.13 of the Linux kernel. + +The first section covers simple special cases, the second section +takes off the training wheels to cover more involved examples, +and the third section provides a few rules of thumb. + + +Simple special cases +==================== + +This section presents two simple special cases, the first being where +there is only one CPU or only one memory location is accessed, and the +second being use of that old concurrency workhorse, locking. + + +Single CPU or single memory location +------------------------------------ + +If there is only one CPU on the one hand or only one variable +on the other, the code will execute in order. There are (as +usual) some things to be careful of: + +1. Some aspects of the C language are unordered. For example, + in the expression "f(x) + g(y)", the order in which f and g are + called is not defined; the object code is allowed to use either + order or even to interleave the computations. + +2. Compilers are permitted to use the "as-if" rule. That is, a + compiler can emit whatever code it likes for normal accesses, + as long as the results of a single-threaded execution appear + just as if the compiler had followed all the relevant rules. + To see this, compile with a high level of optimization and run + the debugger on the resulting binary. + +3. If there is only one variable but multiple CPUs, that variable + must be properly aligned and all accesses to that variable must + be full sized. Variables that straddle cachelines or pages void + your full-ordering warranty, as do undersized accesses that load + from or store to only part of the variable. + +4. If there are multiple CPUs, accesses to shared variables should + use READ_ONCE() and WRITE_ONCE() or stronger to prevent load/store + tearing, load/store fusing, and invented loads and stores. + There are exceptions to this rule, including: + + i. When there is no possibility of a given shared variable + being updated by some other CPU, for example, while + holding the update-side lock, reads from that variable + need not use READ_ONCE(). + + ii. When there is no possibility of a given shared variable + being either read or updated by other CPUs, for example, + when running during early boot, reads from that variable + need not use READ_ONCE() and writes to that variable + need not use WRITE_ONCE(). + + +Locking +------- + +Locking is well-known and straightforward, at least if you don't think +about it too hard. And the basic rule is indeed quite simple: Any CPU that +has acquired a given lock sees any changes previously seen or made by any +CPU before it released that same lock. Note that this statement is a bit +stronger than "Any CPU holding a given lock sees all changes made by any +CPU during the time that CPU was holding this same lock". For example, +consider the following pair of code fragments: + + /* See MP+polocks.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + spin_lock(&mylock); + WRITE_ONCE(y, 1); + spin_unlock(&mylock); + } + + void CPU1(void) + { + spin_lock(&mylock); + r0 = READ_ONCE(y); + spin_unlock(&mylock); + r1 = READ_ONCE(x); + } + +The basic rule guarantees that if CPU0() acquires mylock before CPU1(), +then both r0 and r1 must be set to the value 1. This also has the +consequence that if the final value of r0 is equal to 1, then the final +value of r1 must also be equal to 1. In contrast, the weaker rule would +say nothing about the final value of r1. + +The converse to the basic rule also holds, as illustrated by the +following litmus test: + + /* See MP+porevlocks.litmus. */ + void CPU0(void) + { + r0 = READ_ONCE(y); + spin_lock(&mylock); + r1 = READ_ONCE(x); + spin_unlock(&mylock); + } + + void CPU1(void) + { + spin_lock(&mylock); + WRITE_ONCE(x, 1); + spin_unlock(&mylock); + WRITE_ONCE(y, 1); + } + +This converse to the basic rule guarantees that if CPU0() acquires +mylock before CPU1(), then both r0 and r1 must be set to the value 0. +This also has the consequence that if the final value of r1 is equal +to 0, then the final value of r0 must also be equal to 0. In contrast, +the weaker rule would say nothing about the final value of r0. + +These examples show only a single pair of CPUs, but the effects of the +locking basic rule extend across multiple acquisitions of a given lock +across multiple CPUs. + +However, it is not necessarily the case that accesses ordered by +locking will be seen as ordered by CPUs not holding that lock. +Consider this example: + + /* See Z6.0+pooncelock+pooncelock+pombonce.litmus. */ + void CPU0(void) + { + spin_lock(&mylock); + WRITE_ONCE(x, 1); + WRITE_ONCE(y, 1); + spin_unlock(&mylock); + } + + void CPU1(void) + { + spin_lock(&mylock); + r0 = READ_ONCE(y); + WRITE_ONCE(z, 1); + spin_unlock(&mylock); + } + + void CPU2(void) + { + WRITE_ONCE(z, 2); + smp_mb(); + r1 = READ_ONCE(x); + } + +Counter-intuitive though it might be, it is quite possible to have +the final value of r0 be 1, the final value of z be 2, and the final +value of r1 be 0. The reason for this surprising outcome is that +CPU2() never acquired the lock, and thus did not benefit from the +lock's ordering properties. + +Ordering can be extended to CPUs not holding the lock by careful use +of smp_mb__after_spinlock(): + + /* See Z6.0+pooncelock+poonceLock+pombonce.litmus. */ + void CPU0(void) + { + spin_lock(&mylock); + WRITE_ONCE(x, 1); + WRITE_ONCE(y, 1); + spin_unlock(&mylock); + } + + void CPU1(void) + { + spin_lock(&mylock); + smp_mb__after_spinlock(); + r0 = READ_ONCE(y); + WRITE_ONCE(z, 1); + spin_unlock(&mylock); + } + + void CPU2(void) + { + WRITE_ONCE(z, 2); + smp_mb(); + r1 = READ_ONCE(x); + } + +This addition of smp_mb__after_spinlock() strengthens the lock acquisition +sufficiently to rule out the counter-intuitive outcome. + + +Taking off the training wheels +============================== + +This section looks at more complex examples, including message passing, +load buffering, release-acquire chains, store buffering. +Many classes of litmus tests have abbreviated names, which may be found +here: https://www.cl.cam.ac.uk/~pes20/ppc-supplemental/test6.pdf + + +Message passing (MP) +-------------------- + +The MP pattern has one CPU execute a pair of stores to a pair of variables +and another CPU execute a pair of loads from this same pair of variables, +but in the opposite order. The goal is to avoid the counter-intuitive +outcome in which the first load sees the value written by the second store +but the second load does not see the value written by the first store. +In the absence of any ordering, this goal may not be met, as can be seen +in the MP+poonceonces.litmus litmus test. This section therefore looks at +a number of ways of meeting this goal. + + +Release and acquire +~~~~~~~~~~~~~~~~~~~ + +Use of smp_store_release() and smp_load_acquire() is one way to force +the desired MP ordering. The general approach is shown below: + + /* See MP+pooncerelease+poacquireonce.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + smp_store_release(&y, 1); + } + + void CPU1(void) + { + r0 = smp_load_acquire(&y); + r1 = READ_ONCE(x); + } + +The smp_store_release() macro orders any prior accesses against the +store, while the smp_load_acquire macro orders the load against any +subsequent accesses. Therefore, if the final value of r0 is the value 1, +the final value of r1 must also be the value 1. + +The init_stack_slab() function in lib/stackdepot.c uses release-acquire +in this way to safely initialize of a slab of the stack. Working out +the mutual-exclusion design is left as an exercise for the reader. + + +Assign and dereference +~~~~~~~~~~~~~~~~~~~~~~ + +Use of rcu_assign_pointer() and rcu_dereference() is quite similar to the +use of smp_store_release() and smp_load_acquire(), except that both +rcu_assign_pointer() and rcu_dereference() operate on RCU-protected +pointers. The general approach is shown below: + + /* See MP+onceassign+derefonce.litmus. */ + int z; + int *y = &z; + int x; + + void CPU0(void) + { + WRITE_ONCE(x, 1); + rcu_assign_pointer(y, &x); + } + + void CPU1(void) + { + rcu_read_lock(); + r0 = rcu_dereference(y); + r1 = READ_ONCE(*r0); + rcu_read_unlock(); + } + +In this example, if the final value of r0 is &x then the final value of +r1 must be 1. + +The rcu_assign_pointer() macro has the same ordering properties as does +smp_store_release(), but the rcu_dereference() macro orders the load only +against later accesses that depend on the value loaded. A dependency +is present if the value loaded determines the address of a later access +(address dependency, as shown above), the value written by a later store +(data dependency), or whether or not a later store is executed in the +first place (control dependency). Note that the term "data dependency" +is sometimes casually used to cover both address and data dependencies. + +In lib/prime_numbers.c, the expand_to_next_prime() function invokes +rcu_assign_pointer(), and the next_prime_number() function invokes +rcu_dereference(). This combination mediates access to a bit vector +that is expanded as additional primes are needed. + + +Write and read memory barriers +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +It is usually better to use smp_store_release() instead of smp_wmb() +and to use smp_load_acquire() instead of smp_rmb(). However, the older +smp_wmb() and smp_rmb() APIs are still heavily used, so it is important +to understand their use cases. The general approach is shown below: + + /* See MP+wmbonceonce+rmbonceonce.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + smp_wmb(); + WRITE_ONCE(y, 1); + } + + void CPU1(void) + { + r0 = READ_ONCE(y); + smp_rmb(); + r1 = READ_ONCE(x); + } + +The smp_wmb() macro orders prior stores against later stores, and the +smp_rmb() macro orders prior loads against later loads. Therefore, if +the final value of r0 is 1, the final value of r1 must also be 1. + +The the xlog_state_switch_iclogs() function in fs/xfs/xfs_log.c contains +the following write-side code fragment: + + log->l_curr_block -= log->l_logBBsize; + ASSERT(log->l_curr_block >= 0); + smp_wmb(); + log->l_curr_cycle++; + +And the xlog_valid_lsn() function in fs/xfs/xfs_log_priv.h contains +the corresponding read-side code fragment: + + cur_cycle = ACCESS_ONCE(log->l_curr_cycle); + smp_rmb(); + cur_block = ACCESS_ONCE(log->l_curr_block); + +Alternatively, consider the following comment in function +perf_output_put_handle() in kernel/events/ring_buffer.c: + + * kernel user + * + * if (LOAD ->data_tail) { LOAD ->data_head + * (A) smp_rmb() (C) + * STORE $data LOAD $data + * smp_wmb() (B) smp_mb() (D) + * STORE ->data_head STORE ->data_tail + * } + +The B/C pairing is an example of the MP pattern using smp_wmb() on the +write side and smp_rmb() on the read side. + +Of course, given that smp_mb() is strictly stronger than either smp_wmb() +or smp_rmb(), any code fragment that would work with smp_rmb() and +smp_wmb() would also work with smp_mb() replacing either or both of the +weaker barriers. + + +Load buffering (LB) +------------------- + +The LB pattern has one CPU load from one variable and then store to a +second, while another CPU loads from the second variable and then stores +to the first. The goal is to avoid the counter-intuitive situation where +each load reads the value written by the other CPU's store. In the +absence of any ordering it is quite possible that this may happen, as +can be seen in the LB+poonceonces.litmus litmus test. + +One way of avoiding the counter-intuitive outcome is through the use of a +control dependency paired with a full memory barrier: + + /* See LB+ctrlonceonce+mbonceonce.litmus. */ + void CPU0(void) + { + r0 = READ_ONCE(x); + if (r0) + WRITE_ONCE(y, 1); + } + + void CPU1(void) + { + r1 = READ_ONCE(y); + smp_mb(); + WRITE_ONCE(x, 1); + } + +This pairing of a control dependency in CPU0() with a full memory +barrier in CPU1() prevents r0 and r1 from both ending up equal to 1. + +The A/D pairing from the ring-buffer use case shown earlier also +illustrates LB. Here is a repeat of the comment in +perf_output_put_handle() in kernel/events/ring_buffer.c, showing a +control dependency on the kernel side and a full memory barrier on +the user side: + + * kernel user + * + * if (LOAD ->data_tail) { LOAD ->data_head + * (A) smp_rmb() (C) + * STORE $data LOAD $data + * smp_wmb() (B) smp_mb() (D) + * STORE ->data_head STORE ->data_tail + * } + * + * Where A pairs with D, and B pairs with C. + +The kernel's control dependency between the load from ->data_tail +and the store to data combined with the user's full memory barrier +between the load from data and the store to ->data_tail prevents +the counter-intuitive outcome where the kernel overwrites the data +before the user gets done loading it. + + +Release-acquire chains +---------------------- + +Release-acquire chains are a low-overhead, flexible, and easy-to-use +method of maintaining order. However, they do have some limitations that +need to be fully understood. Here is an example that maintains order: + + /* See ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + smp_store_release(&y, 1); + } + + void CPU1(void) + { + r0 = smp_load_acquire(y); + smp_store_release(&z, 1); + } + + void CPU2(void) + { + r1 = smp_load_acquire(z); + r2 = READ_ONCE(x); + } + +In this case, if r0 and r1 both have final values of 1, then r2 must +also have a final value of 1. + +The ordering in this example is stronger than it needs to be. For +example, ordering would still be preserved if CPU1()'s smp_load_acquire() +invocation was replaced with READ_ONCE(). + +It is tempting to assume that CPU0()'s store to x is globally ordered +before CPU1()'s store to z, but this is not the case: + + /* See Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + smp_store_release(&y, 1); + } + + void CPU1(void) + { + r0 = smp_load_acquire(y); + smp_store_release(&z, 1); + } + + void CPU2(void) + { + WRITE_ONCE(z, 2); + smp_mb(); + r1 = READ_ONCE(x); + } + +One might hope that if the final value of r0 is 1 and the final value +of z is 2, then the final value of r1 must also be 1, but it really is +possible for r1 to have the final value of 0. The reason, of course, +is that in this version, CPU2() is not part of the release-acquire chain. +This situation is accounted for in the rules of thumb below. + +Despite this limitation, release-acquire chains are low-overhead as +well as simple and powerful, at least as memory-ordering mechanisms go. + + +Store buffering +--------------- + +Store buffering can be thought of as upside-down load buffering, so +that one CPU first stores to one variable and then loads from a second, +while another CPU stores to the second variable and then loads from the +first. Preserving order requires nothing less than full barriers: + + /* See SB+mbonceonces.litmus. */ + void CPU0(void) + { + WRITE_ONCE(x, 1); + smp_mb(); + r0 = READ_ONCE(y); + } + + void CPU1(void) + { + WRITE_ONCE(y, 1); + smp_mb(); + r1 = READ_ONCE(x); + } + +Omitting either smp_mb() will allow both r0 and r1 to have final +values of 0, but providing both full barriers as shown above prevents +this counter-intuitive outcome. + +This pattern most famously appears as part of Dekker's locking +algorithm, but it has a much more practical use within the Linux kernel +of ordering wakeups. The following comment taken from waitqueue_active() +in include/linux/wait.h shows the canonical pattern: + + * CPU0 - waker CPU1 - waiter + * + * for (;;) { + * @cond = true; prepare_to_wait(&wq_head, &wait, state); + * smp_mb(); // smp_mb() from set_current_state() + * if (waitqueue_active(wq_head)) if (@cond) + * wake_up(wq_head); break; + * schedule(); + * } + * finish_wait(&wq_head, &wait); + +On CPU0, the store is to @cond and the load is in waitqueue_active(). +On CPU1, prepare_to_wait() contains both a store to wq_head and a call +to set_current_state(), which contains an smp_mb() barrier; the load is +"if (@cond)". The full barriers prevent the undesirable outcome where +CPU1 puts the waiting task to sleep and CPU0 fails to wake it up. + +Note that use of locking can greatly simplify this pattern. + + +Rules of thumb +============== + +There might seem to be no pattern governing what ordering primitives are +needed in which situations, but this is not the case. There is a pattern +based on the relation between the accesses linking successive CPUs in a +given litmus test. There are three types of linkage: + +1. Write-to-read, where the next CPU reads the value that the + previous CPU wrote. The LB litmus-test patterns contain only + this type of relation. In formal memory-modeling texts, this + relation is called "reads-from" and is usually abbreviated "rf". + +2. Read-to-write, where the next CPU overwrites the value that the + previous CPU read. The SB litmus test contains only this type + of relation. In formal memory-modeling texts, this relation is + often called "from-reads" and is sometimes abbreviated "fr". + +3. Write-to-write, where the next CPU overwrites the value written + by the previous CPU. The Z6.0 litmus test pattern contains a + write-to-write relation between the last access of CPU1() and + the first access of CPU2(). In formal memory-modeling texts, + this relation is often called "coherence order" and is sometimes + abbreviated "co". In the C++ standard, it is instead called + "modification order" and often abbreviated "mo". + +The strength of memory ordering required for a given litmus test to +avoid a counter-intuitive outcome depends on the types of relations +linking the memory accesses for the outcome in question: + +o If all links are write-to-read links, then the weakest + possible ordering within each CPU suffices. For example, in + the LB litmus test, a control dependency was enough to do the + job. + +o If all but one of the links are write-to-read links, then a + release-acquire chain suffices. Both the MP and the ISA2 + litmus tests illustrate this case. + +o If more than one of the links are something other than + write-to-read links, then a full memory barrier is required + between each successive pair of non-write-to-read links. This + case is illustrated by the Z6.0 litmus tests, both in the + locking and in the release-acquire sections. + +However, if you find yourself having to stretch these rules of thumb +to fit your situation, you should consider creating a litmus test and +running it on the model. diff --git a/tools/memory-model/Documentation/references.txt b/tools/memory-model/Documentation/references.txt new file mode 100644 index 000000000000..ba2e34c2ec3f --- /dev/null +++ b/tools/memory-model/Documentation/references.txt @@ -0,0 +1,107 @@ +This document provides background reading for memory models and related +tools. These documents are aimed at kernel hackers who are interested +in memory models. + + +Hardware manuals and models +=========================== + +o SPARC International Inc. (Ed.). 1994. "The SPARC Architecture + Reference Manual Version 9". SPARC International Inc. + +o Compaq Computer Corporation (Ed.). 2002. "Alpha Architecture + Reference Manual". Compaq Computer Corporation. + +o Intel Corporation (Ed.). 2002. "A Formal Specification of Intel + Itanium Processor Family Memory Ordering". Intel Corporation. + +o Intel Corporation (Ed.). 2002. "Intel 64 and IA-32 Architectures + Software Developer’s Manual". Intel Corporation. + +o Peter Sewell, Susmit Sarkar, Scott Owens, Francesco Zappa Nardelli, + and Magnus O. Myreen. 2010. "x86-TSO: A Rigorous and Usable + Programmer's Model for x86 Multiprocessors". Commun. ACM 53, 7 + (July, 2010), 89-97. http://doi.acm.org/10.1145/1785414.1785443 + +o IBM Corporation (Ed.). 2009. "Power ISA Version 2.06". IBM + Corporation. + +o ARM Ltd. (Ed.). 2009. "ARM Barrier Litmus Tests and Cookbook". + ARM Ltd. + +o Susmit Sarkar, Peter Sewell, Jade Alglave, Luc Maranget, and + Derek Williams. 2011. "Understanding POWER Multiprocessors". In + Proceedings of the 32Nd ACM SIGPLAN Conference on Programming + Language Design and Implementation (PLDI ’11). ACM, New York, + NY, USA, 175–186. + +o Susmit Sarkar, Kayvan Memarian, Scott Owens, Mark Batty, + Peter Sewell, Luc Maranget, Jade Alglave, and Derek Williams. + 2012. "Synchronising C/C++ and POWER". In Proceedings of the 33rd + ACM SIGPLAN Conference on Programming Language Design and + Implementation (PLDI '12). ACM, New York, NY, USA, 311-322. + +o ARM Ltd. (Ed.). 2014. "ARM Architecture Reference Manual (ARMv8, + for ARMv8-A architecture profile)". ARM Ltd. + +o Imagination Technologies, LTD. 2015. "MIPS(R) Architecture + For Programmers, Volume II-A: The MIPS64(R) Instruction, + Set Reference Manual". Imagination Technologies, + LTD. https://imgtec.com/?do-download=4302. + +o Shaked Flur, Kathryn E. Gray, Christopher Pulte, Susmit + Sarkar, Ali Sezgin, Luc Maranget, Will Deacon, and Peter + Sewell. 2016. "Modelling the ARMv8 Architecture, Operationally: + Concurrency and ISA". In Proceedings of the 43rd Annual ACM + SIGPLAN-SIGACT Symposium on Principles of Programming Languages + (POPL ’16). ACM, New York, NY, USA, 608–621. + +o Shaked Flur, Susmit Sarkar, Christopher Pulte, Kyndylan Nienhuis, + Luc Maranget, Kathryn E. Gray, Ali Sezgin, Mark Batty, and Peter + Sewell. 2017. "Mixed-size Concurrency: ARM, POWER, C/C++11, + and SC". In Proceedings of the 44th ACM SIGPLAN Symposium on + Principles of Programming Languages (POPL 2017). ACM, New York, + NY, USA, 429–442. + + +Linux-kernel memory model +========================= + +o Andrea Parri, Alan Stern, Luc Maranget, Paul E. McKenney, + and Jade Alglave. 2017. "A formal model of + Linux-kernel memory ordering - companion webpage". + http://moscova.inria.fr/∼maranget/cats7/linux/. (2017). [Online; + accessed 30-January-2017]. + +o Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and + Alan Stern. 2017. "A formal kernel memory-ordering model (part 1)" + Linux Weekly News. https://lwn.net/Articles/718628/ + +o Jade Alglave, Luc Maranget, Paul E. McKenney, Andrea Parri, and + Alan Stern. 2017. "A formal kernel memory-ordering model (part 2)" + Linux Weekly News. https://lwn.net/Articles/720550/ + + +Memory-model tooling +==================== + +o Daniel Jackson. 2002. "Alloy: A Lightweight Object Modelling + Notation". ACM Trans. Softw. Eng. Methodol. 11, 2 (April 2002), + 256–290. http://doi.acm.org/10.1145/505145.505149 + +o Jade Alglave, Luc Maranget, and Michael Tautschnig. 2014. "Herding + Cats: Modelling, Simulation, Testing, and Data Mining for Weak + Memory". ACM Trans. Program. Lang. Syst. 36, 2, Article 7 (July + 2014), 7:1–7:74 pages. + +o Jade Alglave, Patrick Cousot, and Luc Maranget. 2016. "Syntax and + semantics of the weak consistency model specification language + cat". CoRR abs/1608.07531 (2016). http://arxiv.org/abs/1608.07531 + + +Memory-model comparisons +======================== + +o Paul E. McKenney, Ulrich Weigand, Andrea Parri, and Boqun + Feng. 2016. "Linux-Kernel Memory Model". (6 June 2016). + http://open-std.org/JTC1/SC22/WG21/docs/papers/2016/p0124r2.html. diff --git a/tools/memory-model/MAINTAINERS b/tools/memory-model/MAINTAINERS new file mode 100644 index 000000000000..711cbe72d606 --- /dev/null +++ b/tools/memory-model/MAINTAINERS @@ -0,0 +1,15 @@ +LINUX KERNEL MEMORY MODEL +M: Alan Stern +M: Andrea Parri +M: Will Deacon +M: Peter Zijlstra +M: Boqun Feng +M: Nicholas Piggin +M: David Howells +M: Jade Alglave +M: Luc Maranget +M: "Paul E. McKenney" +L: linux-kernel@vger.kernel.org +S: Supported +T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git +F: tools/memory-model/ diff --git a/tools/memory-model/README b/tools/memory-model/README new file mode 100644 index 000000000000..43ba49492111 --- /dev/null +++ b/tools/memory-model/README @@ -0,0 +1,220 @@ + ========================= + LINUX KERNEL MEMORY MODEL + ========================= + +============ +INTRODUCTION +============ + +This directory contains the memory model of the Linux kernel, written +in the "cat" language and executable by the (externally provided) +"herd7" simulator, which exhaustively explores the state space of +small litmus tests. + +In addition, the "klitmus7" tool (also externally provided) may be used +to convert a litmus test to a Linux kernel module, which in turn allows +that litmus test to be exercised within the Linux kernel. + + +============ +REQUIREMENTS +============ + +The "herd7" and "klitmus7" tools must be downloaded separately: + + https://github.com/herd/herdtools7 + +See "herdtools7/INSTALL.md" for installation instructions. + +Alternatively, Abhishek Bhardwaj has kindly provided a Docker image +of these tools at "abhishek40/memory-model". Abhishek suggests the +following commands to install and use this image: + + - Users should install Docker for their distribution. + - docker run -itd abhishek40/memory-model + - docker attach + +Gentoo users might wish to make use of Patrick McLean's package: + + https://gitweb.gentoo.org/repo/gentoo.git/tree/dev-util/herdtools7 + +These packages may not be up-to-date with respect to the GitHub +repository. + + +================== +BASIC USAGE: HERD7 +================== + +The memory model is used, in conjunction with "herd7", to exhaustively +explore the state space of small litmus tests. + +For example, to run SB+mbonceonces.litmus against the memory model: + + $ herd7 -conf linux-kernel.cfg litmus-tests/SB+mbonceonces.litmus + +Here is the corresponding output: + + Test SB+mbonceonces Allowed + States 3 + 0:r0=0; 1:r0=1; + 0:r0=1; 1:r0=0; + 0:r0=1; 1:r0=1; + No + Witnesses + Positive: 0 Negative: 3 + Condition exists (0:r0=0 /\ 1:r0=0) + Observation SB+mbonceonces Never 0 3 + Time SB+mbonceonces 0.01 + Hash=d66d99523e2cac6b06e66f4c995ebb48 + +The "Positive: 0 Negative: 3" and the "Never 0 3" each indicate that +this litmus test's "exists" clause can not be satisfied. + +See "herd7 -help" or "herdtools7/doc/" for more information. + + +===================== +BASIC USAGE: KLITMUS7 +===================== + +The "klitmus7" tool converts a litmus test into a Linux kernel module, +which may then be loaded and run. + +For example, to run SB+mbonceonces.litmus against hardware: + + $ mkdir mymodules + $ klitmus7 -o mymodules litmus-tests/SB+mbonceonces.litmus + $ cd mymodules ; make + $ sudo sh run.sh + +The corresponding output includes: + + Test SB+mbonceonces Allowed + Histogram (3 states) + 644580 :>0:r0=1; 1:r0=0; + 644328 :>0:r0=0; 1:r0=1; + 711092 :>0:r0=1; 1:r0=1; + No + Witnesses + Positive: 0, Negative: 2000000 + Condition exists (0:r0=0 /\ 1:r0=0) is NOT validated + Hash=d66d99523e2cac6b06e66f4c995ebb48 + Observation SB+mbonceonces Never 0 2000000 + Time SB+mbonceonces 0.16 + +The "Positive: 0 Negative: 2000000" and the "Never 0 2000000" indicate +that during two million trials, the state specified in this litmus +test's "exists" clause was not reached. + +And, as with "herd7", please see "klitmus7 -help" or "herdtools7/doc/" +for more information. + + +==================== +DESCRIPTION OF FILES +==================== + +Documentation/cheatsheet.txt + Quick-reference guide to the Linux-kernel memory model. + +Documentation/explanation.txt + Describes the memory model in detail. + +Documentation/recipes.txt + Lists common memory-ordering patterns. + +Documentation/references.txt + Provides background reading. + +linux-kernel.bell + Categorizes the relevant instructions, including memory + references, memory barriers, atomic read-modify-write operations, + lock acquisition/release, and RCU operations. + + More formally, this file (1) lists the subtypes of the various + event types used by the memory model and (2) performs RCU + read-side critical section nesting analysis. + +linux-kernel.cat + Specifies what reorderings are forbidden by memory references, + memory barriers, atomic read-modify-write operations, and RCU. + + More formally, this file specifies what executions are forbidden + by the memory model. Allowed executions are those which + satisfy the model's "coherence", "atomic", "happens-before", + "propagation", and "rcu" axioms, which are defined in the file. + +linux-kernel.cfg + Convenience file that gathers the common-case herd7 command-line + arguments. + +linux-kernel.def + Maps from C-like syntax to herd7's internal litmus-test + instruction-set architecture. + +litmus-tests + Directory containing a few representative litmus tests, which + are listed in litmus-tests/README. A great deal more litmus + tests are available at https://github.com/paulmckrcu/litmus. + +lock.cat + Provides a front-end analysis of lock acquisition and release, + for example, associating a lock acquisition with the preceding + and following releases and checking for self-deadlock. + + More formally, this file defines a performance-enhanced scheme + for generation of the possible reads-from and coherence order + relations on the locking primitives. + +README + This file. + + +=========== +LIMITATIONS +=========== + +The Linux-kernel memory model has the following limitations: + +1. Compiler optimizations are not modeled. Of course, the use + of READ_ONCE() and WRITE_ONCE() limits the compiler's ability + to optimize, but there is Linux-kernel code that uses bare C + memory accesses. Handling this code is on the to-do list. + For more information, see Documentation/explanation.txt (in + particular, the "THE PROGRAM ORDER RELATION: po AND po-loc" + and "A WARNING" sections). + +2. Multiple access sizes for a single variable are not supported, + and neither are misaligned or partially overlapping accesses. + +3. Exceptions and interrupts are not modeled. In some cases, + this limitation can be overcome by modeling the interrupt or + exception with an additional process. + +4. I/O such as MMIO or DMA is not supported. + +5. Self-modifying code (such as that found in the kernel's + alternatives mechanism, function tracer, Berkeley Packet Filter + JIT compiler, and module loader) is not supported. + +6. Complete modeling of all variants of atomic read-modify-write + operations, locking primitives, and RCU is not provided. + For example, call_rcu() and rcu_barrier() are not supported. + However, a substantial amount of support is provided for these + operations, as shown in the linux-kernel.def file. + +The "herd7" tool has some additional limitations of its own, apart from +the memory model: + +1. Non-trivial data structures such as arrays or structures are + not supported. However, pointers are supported, allowing trivial + linked lists to be constructed. + +2. Dynamic memory allocation is not supported, although this can + be worked around in some cases by supplying multiple statically + allocated variables. + +Some of these limitations may be overcome in the future, but others are +more likely to be addressed by incorporating the Linux-kernel memory model +into other tools. diff --git a/tools/memory-model/linux-kernel.bell b/tools/memory-model/linux-kernel.bell new file mode 100644 index 000000000000..57112505f5e0 --- /dev/null +++ b/tools/memory-model/linux-kernel.bell @@ -0,0 +1,53 @@ +// SPDX-License-Identifier: GPL-2.0+ +(* + * Copyright (C) 2015 Jade Alglave , + * Copyright (C) 2016 Luc Maranget for Inria + * Copyright (C) 2017 Alan Stern , + * Andrea Parri + * + * An earlier version of this file appears in the companion webpage for + * "Frightening small children and disconcerting grown-ups: Concurrency + * in the Linux kernel" by Alglave, Maranget, McKenney, Parri, and Stern, + * which is to appear in ASPLOS 2018. + *) + +"Linux kernel memory model" + +enum Accesses = 'once (*READ_ONCE,WRITE_ONCE,ACCESS_ONCE*) || + 'release (*smp_store_release*) || + 'acquire (*smp_load_acquire*) || + 'noreturn (* R of non-return RMW *) +instructions R[{'once,'acquire,'noreturn}] +instructions W[{'once,'release}] +instructions RMW[{'once,'acquire,'release}] + +enum Barriers = 'wmb (*smp_wmb*) || + 'rmb (*smp_rmb*) || + 'mb (*smp_mb*) || + 'rb_dep (*smp_read_barrier_depends*) || + 'rcu-lock (*rcu_read_lock*) || + 'rcu-unlock (*rcu_read_unlock*) || + 'sync-rcu (*synchronize_rcu*) || + 'before_atomic (*smp_mb__before_atomic*) || + 'after_atomic (*smp_mb__after_atomic*) || + 'after_spinlock (*smp_mb__after_spinlock*) +instructions F[Barriers] + +(* Compute matching pairs of nested Rcu-lock and Rcu-unlock *) +let matched = let rec + unmatched-locks = Rcu-lock \ domain(matched) + and unmatched-unlocks = Rcu-unlock \ range(matched) + and unmatched = unmatched-locks | unmatched-unlocks + and unmatched-po = [unmatched] ; po ; [unmatched] + and unmatched-locks-to-unlocks = + [unmatched-locks] ; po ; [unmatched-unlocks] + and matched = matched | (unmatched-locks-to-unlocks \ + (unmatched-po ; unmatched-po)) + in matched + +(* Validate nesting *) +flag ~empty Rcu-lock \ domain(matched) as unbalanced-rcu-locking +flag ~empty Rcu-unlock \ range(matched) as unbalanced-rcu-locking + +(* Outermost level of nesting only *) +let crit = matched \ (po^-1 ; matched ; po^-1) diff --git a/tools/memory-model/linux-kernel.cat b/tools/memory-model/linux-kernel.cat new file mode 100644 index 000000000000..15b7a5dd8a9a --- /dev/null +++ b/tools/memory-model/linux-kernel.cat @@ -0,0 +1,124 @@ +// SPDX-License-Identifier: GPL-2.0+ +(* + * Copyright (C) 2015 Jade Alglave , + * Copyright (C) 2016 Luc Maranget for Inria + * Copyright (C) 2017 Alan Stern , + * Andrea Parri + * + * An earlier version of this file appears in the companion webpage for + * "Frightening small children and disconcerting grown-ups: Concurrency + * in the Linux kernel" by Alglave, Maranget, McKenney, Parri, and Stern, + * which is to appear in ASPLOS 2018. + *) + +"Linux kernel memory model" + +(* + * File "lock.cat" handles locks and is experimental. + * It can be replaced by include "cos.cat" for tests that do not use locks. + *) + +include "lock.cat" + +(*******************) +(* Basic relations *) +(*******************) + +(* Fences *) +let rb-dep = [R] ; fencerel(Rb_dep) ; [R] +let rmb = [R \ Noreturn] ; fencerel(Rmb) ; [R \ Noreturn] +let wmb = [W] ; fencerel(Wmb) ; [W] +let mb = ([M] ; fencerel(Mb) ; [M]) | + ([M] ; fencerel(Before_atomic) ; [RMW] ; po? ; [M]) | + ([M] ; po? ; [RMW] ; fencerel(After_atomic) ; [M]) | + ([M] ; po? ; [LKW] ; fencerel(After_spinlock) ; [M]) +let gp = po ; [Sync-rcu] ; po? + +let strong-fence = mb | gp + +(* Release Acquire *) +let acq-po = [Acquire] ; po ; [M] +let po-rel = [M] ; po ; [Release] +let rfi-rel-acq = [Release] ; rfi ; [Acquire] + +(**********************************) +(* Fundamental coherence ordering *) +(**********************************) + +(* Sequential Consistency Per Variable *) +let com = rf | co | fr +acyclic po-loc | com as coherence + +(* Atomic Read-Modify-Write *) +empty rmw & (fre ; coe) as atomic + +(**********************************) +(* Instruction execution ordering *) +(**********************************) + +(* Preserved Program Order *) +let dep = addr | data +let rwdep = (dep | ctrl) ; [W] +let overwrite = co | fr +let to-w = rwdep | (overwrite & int) +let rrdep = addr | (dep ; rfi) +let strong-rrdep = rrdep+ & rb-dep +let to-r = strong-rrdep | rfi-rel-acq +let fence = strong-fence | wmb | po-rel | rmb | acq-po +let ppo = rrdep* ; (to-r | to-w | fence) + +(* Propagation: Ordering from release operations and strong fences. *) +let A-cumul(r) = rfe? ; r +let cumul-fence = A-cumul(strong-fence | po-rel) | wmb +let prop = (overwrite & ext)? ; cumul-fence* ; rfe? + +(* + * Happens Before: Ordering from the passage of time. + * No fences needed here for prop because relation confined to one process. + *) +let hb = ppo | rfe | ((prop \ id) & int) +acyclic hb as happens-before + +(****************************************) +(* Write and fence propagation ordering *) +(****************************************) + +(* Propagation: Each non-rf link needs a strong fence. *) +let pb = prop ; strong-fence ; hb* +acyclic pb as propagation + +(*******) +(* RCU *) +(*******) + +(* + * Effect of read-side critical section proceeds from the rcu_read_lock() + * onward on the one hand and from the rcu_read_unlock() backwards on the + * other hand. + *) +let rscs = po ; crit^-1 ; po? + +(* + * The synchronize_rcu() strong fence is special in that it can order not + * one but two non-rf relations, but only in conjunction with an RCU + * read-side critical section. + *) +let link = hb* ; pb* ; prop + +(* Chains that affect the RCU grace-period guarantee *) +let gp-link = gp ; link +let rscs-link = rscs ; link + +(* + * A cycle containing at least as many grace periods as RCU read-side + * critical sections is forbidden. + *) +let rec rcu-path = + gp-link | + (gp-link ; rscs-link) | + (rscs-link ; gp-link) | + (rcu-path ; rcu-path) | + (gp-link ; rcu-path ; rscs-link) | + (rscs-link ; rcu-path ; gp-link) + +irreflexive rcu-path as rcu diff --git a/tools/memory-model/linux-kernel.cfg b/tools/memory-model/linux-kernel.cfg new file mode 100644 index 000000000000..3c8098e99f41 --- /dev/null +++ b/tools/memory-model/linux-kernel.cfg @@ -0,0 +1,21 @@ +macros linux-kernel.def +bell linux-kernel.bell +model linux-kernel.cat +graph columns +squished true +showevents noregs +movelabel true +fontsize 8 +xscale 2.0 +yscale 1.5 +arrowsize 0.8 +showinitrf false +showfinalrf false +showinitwrites false +splines spline +pad 0.1 +edgeattr hb,color,indigo +edgeattr co,color,blue +edgeattr mb,color,darkgreen +edgeattr wmb,color,darkgreen +edgeattr rmb,color,darkgreen diff --git a/tools/memory-model/linux-kernel.def b/tools/memory-model/linux-kernel.def new file mode 100644 index 000000000000..a397387f77cc --- /dev/null +++ b/tools/memory-model/linux-kernel.def @@ -0,0 +1,108 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// An earlier version of this file appears in the companion webpage for +// "Frightening small children and disconcerting grown-ups: Concurrency +// in the Linux kernel" by Alglave, Maranget, McKenney, Parri, and Stern, +// which is to appear in ASPLOS 2018. + +// ONCE +READ_ONCE(X) __load{once}(X) +WRITE_ONCE(X,V) { __store{once}(X,V); } + +// Release Acquire and friends +smp_store_release(X,V) { __store{release}(*X,V); } +smp_load_acquire(X) __load{acquire}(*X) +rcu_assign_pointer(X,V) { __store{release}(X,V); } +lockless_dereference(X) __load{lderef}(X) +rcu_dereference(X) __load{deref}(X) + +// Fences +smp_mb() { __fence{mb} ; } +smp_rmb() { __fence{rmb} ; } +smp_wmb() { __fence{wmb} ; } +smp_read_barrier_depends() { __fence{rb_dep}; } +smp_mb__before_atomic() { __fence{before_atomic} ; } +smp_mb__after_atomic() { __fence{after_atomic} ; } +smp_mb__after_spinlock() { __fence{after_spinlock} ; } + +// Exchange +xchg(X,V) __xchg{mb}(X,V) +xchg_relaxed(X,V) __xchg{once}(X,V) +xchg_release(X,V) __xchg{release}(X,V) +xchg_acquire(X,V) __xchg{acquire}(X,V) +cmpxchg(X,V,W) __cmpxchg{mb}(X,V,W) +cmpxchg_relaxed(X,V,W) __cmpxchg{once}(X,V,W) +cmpxchg_acquire(X,V,W) __cmpxchg{acquire}(X,V,W) +cmpxchg_release(X,V,W) __cmpxchg{release}(X,V,W) + +// Spinlocks +spin_lock(X) { __lock(X) ; } +spin_unlock(X) { __unlock(X) ; } +spin_trylock(X) __trylock(X) + +// RCU +rcu_read_lock() { __fence{rcu-lock}; } +rcu_read_unlock() { __fence{rcu-unlock};} +synchronize_rcu() { __fence{sync-rcu}; } +synchronize_rcu_expedited() { __fence{sync-rcu}; } + +// Atomic +atomic_read(X) READ_ONCE(*X) +atomic_set(X,V) { WRITE_ONCE(*X,V) ; } +atomic_read_acquire(X) smp_load_acquire(X) +atomic_set_release(X,V) { smp_store_release(X,V); } + +atomic_add(V,X) { __atomic_op(X,+,V) ; } +atomic_sub(V,X) { __atomic_op(X,-,V) ; } +atomic_inc(X) { __atomic_op(X,+,1) ; } +atomic_dec(X) { __atomic_op(X,-,1) ; } + +atomic_add_return(V,X) __atomic_op_return{mb}(X,+,V) +atomic_add_return_relaxed(V,X) __atomic_op_return{once}(X,+,V) +atomic_add_return_acquire(V,X) __atomic_op_return{acquire}(X,+,V) +atomic_add_return_release(V,X) __atomic_op_return{release}(X,+,V) +atomic_fetch_add(V,X) __atomic_fetch_op{mb}(X,+,V) +atomic_fetch_add_relaxed(V,X) __atomic_fetch_op{once}(X,+,V) +atomic_fetch_add_acquire(V,X) __atomic_fetch_op{acquire}(X,+,V) +atomic_fetch_add_release(V,X) __atomic_fetch_op{release}(X,+,V) + +atomic_inc_return(X) __atomic_op_return{mb}(X,+,1) +atomic_inc_return_relaxed(X) __atomic_op_return{once}(X,+,1) +atomic_inc_return_acquire(X) __atomic_op_return{acquire}(X,+,1) +atomic_inc_return_release(X) __atomic_op_return{release}(X,+,1) +atomic_fetch_inc(X) __atomic_fetch_op{mb}(X,+,1) +atomic_fetch_inc_relaxed(X) __atomic_fetch_op{once}(X,+,1) +atomic_fetch_inc_acquire(X) __atomic_fetch_op{acquire}(X,+,1) +atomic_fetch_inc_release(X) __atomic_fetch_op{release}(X,+,1) + +atomic_sub_return(V,X) __atomic_op_return{mb}(X,-,V) +atomic_sub_return_relaxed(V,X) __atomic_op_return{once}(X,-,V) +atomic_sub_return_acquire(V,X) __atomic_op_return{acquire}(X,-,V) +atomic_sub_return_release(V,X) __atomic_op_return{release}(X,-,V) +atomic_fetch_sub(V,X) __atomic_fetch_op{mb}(X,-,V) +atomic_fetch_sub_relaxed(V,X) __atomic_fetch_op{once}(X,-,V) +atomic_fetch_sub_acquire(V,X) __atomic_fetch_op{acquire}(X,-,V) +atomic_fetch_sub_release(V,X) __atomic_fetch_op{release}(X,-,V) + +atomic_dec_return(X) __atomic_op_return{mb}(X,-,1) +atomic_dec_return_relaxed(X) __atomic_op_return{once}(X,-,1) +atomic_dec_return_acquire(X) __atomic_op_return{acquire}(X,-,1) +atomic_dec_return_release(X) __atomic_op_return{release}(X,-,1) +atomic_fetch_dec(X) __atomic_fetch_op{mb}(X,-,1) +atomic_fetch_dec_relaxed(X) __atomic_fetch_op{once}(X,-,1) +atomic_fetch_dec_acquire(X) __atomic_fetch_op{acquire}(X,-,1) +atomic_fetch_dec_release(X) __atomic_fetch_op{release}(X,-,1) + +atomic_xchg(X,V) __xchg{mb}(X,V) +atomic_xchg_relaxed(X,V) __xchg{once}(X,V) +atomic_xchg_release(X,V) __xchg{release}(X,V) +atomic_xchg_acquire(X,V) __xchg{acquire}(X,V) +atomic_cmpxchg(X,V,W) __cmpxchg{mb}(X,V,W) +atomic_cmpxchg_relaxed(X,V,W) __cmpxchg{once}(X,V,W) +atomic_cmpxchg_acquire(X,V,W) __cmpxchg{acquire}(X,V,W) +atomic_cmpxchg_release(X,V,W) __cmpxchg{release}(X,V,W) + +atomic_sub_and_test(V,X) __atomic_op_return{mb}(X,-,V) == 0 +atomic_dec_and_test(X) __atomic_op_return{mb}(X,-,1) == 0 +atomic_inc_and_test(X) __atomic_op_return{mb}(X,+,1) == 0 +atomic_add_negative(V,X) __atomic_op_return{mb}(X,+,V) < 0 diff --git a/tools/memory-model/litmus-tests/CoRR+poonceonce+Once.litmus b/tools/memory-model/litmus-tests/CoRR+poonceonce+Once.litmus new file mode 100644 index 000000000000..5b83d57f6ac5 --- /dev/null +++ b/tools/memory-model/litmus-tests/CoRR+poonceonce+Once.litmus @@ -0,0 +1,19 @@ +C CoRR+poonceonce+Once + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); +} + +P1(int *x) +{ + int r0; + int r1; + + r0 = READ_ONCE(*x); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/CoRW+poonceonce+Once.litmus b/tools/memory-model/litmus-tests/CoRW+poonceonce+Once.litmus new file mode 100644 index 000000000000..fab91c13d52c --- /dev/null +++ b/tools/memory-model/litmus-tests/CoRW+poonceonce+Once.litmus @@ -0,0 +1,18 @@ +C CoRW+poonceonce+Once + +{} + +P0(int *x) +{ + int r0; + + r0 = READ_ONCE(*x); + WRITE_ONCE(*x, 1); +} + +P1(int *x) +{ + WRITE_ONCE(*x, 2); +} + +exists (x=2 /\ 0:r0=2) diff --git a/tools/memory-model/litmus-tests/CoWR+poonceonce+Once.litmus b/tools/memory-model/litmus-tests/CoWR+poonceonce+Once.litmus new file mode 100644 index 000000000000..6a35ec2042ea --- /dev/null +++ b/tools/memory-model/litmus-tests/CoWR+poonceonce+Once.litmus @@ -0,0 +1,18 @@ +C CoWR+poonceonce+Once + +{} + +P0(int *x) +{ + int r0; + + WRITE_ONCE(*x, 1); + r0 = READ_ONCE(*x); +} + +P1(int *x) +{ + WRITE_ONCE(*x, 2); +} + +exists (x=1 /\ 0:r0=2) diff --git a/tools/memory-model/litmus-tests/CoWW+poonceonce.litmus b/tools/memory-model/litmus-tests/CoWW+poonceonce.litmus new file mode 100644 index 000000000000..32a96b832021 --- /dev/null +++ b/tools/memory-model/litmus-tests/CoWW+poonceonce.litmus @@ -0,0 +1,11 @@ +C CoWW+poonceonce + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); + WRITE_ONCE(*x, 2); +} + +exists (x=1) diff --git a/tools/memory-model/litmus-tests/IRIW+mbonceonces+OnceOnce.litmus b/tools/memory-model/litmus-tests/IRIW+mbonceonces+OnceOnce.litmus new file mode 100644 index 000000000000..7eba2c68992b --- /dev/null +++ b/tools/memory-model/litmus-tests/IRIW+mbonceonces+OnceOnce.litmus @@ -0,0 +1,35 @@ +C IRIW+mbonceonces+OnceOnce + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); +} + +P1(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*x); + smp_mb(); + r1 = READ_ONCE(*y); +} + +P2(int *y) +{ + WRITE_ONCE(*y, 1); +} + +P3(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + smp_mb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0 /\ 3:r0=1 /\ 3:r1=0) diff --git a/tools/memory-model/litmus-tests/IRIW+poonceonces+OnceOnce.litmus b/tools/memory-model/litmus-tests/IRIW+poonceonces+OnceOnce.litmus new file mode 100644 index 000000000000..b0556c6c75d4 --- /dev/null +++ b/tools/memory-model/litmus-tests/IRIW+poonceonces+OnceOnce.litmus @@ -0,0 +1,33 @@ +C IRIW+poonceonces+OnceOnce + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); +} + +P1(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*x); + r1 = READ_ONCE(*y); +} + +P2(int *y) +{ + WRITE_ONCE(*y, 1); +} + +P3(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0 /\ 3:r0=1 /\ 3:r1=0) diff --git a/tools/memory-model/litmus-tests/ISA2+poonceonces.litmus b/tools/memory-model/litmus-tests/ISA2+poonceonces.litmus new file mode 100644 index 000000000000..9a1a233d70c3 --- /dev/null +++ b/tools/memory-model/litmus-tests/ISA2+poonceonces.litmus @@ -0,0 +1,28 @@ +C ISA2+poonceonces + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + WRITE_ONCE(*y, 1); +} + +P1(int *y, int *z) +{ + int r0; + + r0 = READ_ONCE(*y); + WRITE_ONCE(*z, 1); +} + +P2(int *x, int *z) +{ + int r0; + int r1; + + r0 = READ_ONCE(*z); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 2:r0=1 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus b/tools/memory-model/litmus-tests/ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus new file mode 100644 index 000000000000..235195e87d4e --- /dev/null +++ b/tools/memory-model/litmus-tests/ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus @@ -0,0 +1,28 @@ +C ISA2+pooncerelease+poacquirerelease+poacquireonce + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + smp_store_release(y, 1); +} + +P1(int *y, int *z) +{ + int r0; + + r0 = smp_load_acquire(y); + smp_store_release(z, 1); +} + +P2(int *x, int *z) +{ + int r0; + int r1; + + r0 = smp_load_acquire(z); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 2:r0=1 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/LB+ctrlonceonce+mbonceonce.litmus b/tools/memory-model/litmus-tests/LB+ctrlonceonce+mbonceonce.litmus new file mode 100644 index 000000000000..dd5ac3a8974a --- /dev/null +++ b/tools/memory-model/litmus-tests/LB+ctrlonceonce+mbonceonce.litmus @@ -0,0 +1,23 @@ +C LB+ctrlonceonce+mbonceonce + +{} + +P0(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*x); + if (r0) + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*y); + smp_mb(); + WRITE_ONCE(*x, 1); +} + +exists (0:r0=1 /\ 1:r0=1) diff --git a/tools/memory-model/litmus-tests/LB+poacquireonce+pooncerelease.litmus b/tools/memory-model/litmus-tests/LB+poacquireonce+pooncerelease.litmus new file mode 100644 index 000000000000..47bd61319d93 --- /dev/null +++ b/tools/memory-model/litmus-tests/LB+poacquireonce+pooncerelease.litmus @@ -0,0 +1,21 @@ +C LB+poacquireonce+pooncerelease + +{} + +P0(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*x); + smp_store_release(y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = smp_load_acquire(y); + WRITE_ONCE(*x, 1); +} + +exists (0:r0=1 /\ 1:r0=1) diff --git a/tools/memory-model/litmus-tests/LB+poonceonces.litmus b/tools/memory-model/litmus-tests/LB+poonceonces.litmus new file mode 100644 index 000000000000..a5cdf027e34b --- /dev/null +++ b/tools/memory-model/litmus-tests/LB+poonceonces.litmus @@ -0,0 +1,21 @@ +C LB+poonceonces + +{} + +P0(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*x); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*y); + WRITE_ONCE(*x, 1); +} + +exists (0:r0=1 /\ 1:r0=1) diff --git a/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus b/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus new file mode 100644 index 000000000000..1a2fe5830381 --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+onceassign+derefonce.litmus @@ -0,0 +1,25 @@ +C MP+onceassign+derefonce.litmus + +{ +y=z; +z=0; +} + +P0(int *x, int **y) +{ + WRITE_ONCE(*x, 1); + rcu_assign_pointer(*y, x); +} + +P1(int *x, int **y) +{ + int *r0; + int r1; + + rcu_read_lock(); + r0 = rcu_dereference(*y); + r1 = READ_ONCE(*r0); + rcu_read_unlock(); +} + +exists (1:r0=x /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/MP+polocks.litmus b/tools/memory-model/litmus-tests/MP+polocks.litmus new file mode 100644 index 000000000000..5fe6f1e3c452 --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+polocks.litmus @@ -0,0 +1,24 @@ +C MP+polocks + +{} + +P0(int *x, int *y, spinlock_t *mylock) +{ + WRITE_ONCE(*x, 1); + spin_lock(mylock); + WRITE_ONCE(*y, 1); + spin_unlock(mylock); +} + +P1(int *x, int *y, spinlock_t *mylock) +{ + int r0; + int r1; + + spin_lock(mylock); + r0 = READ_ONCE(*y); + spin_unlock(mylock); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/MP+poonceonces.litmus b/tools/memory-model/litmus-tests/MP+poonceonces.litmus new file mode 100644 index 000000000000..46e1ac7ba126 --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+poonceonces.litmus @@ -0,0 +1,20 @@ +C MP+poonceonces + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/MP+pooncerelease+poacquireonce.litmus b/tools/memory-model/litmus-tests/MP+pooncerelease+poacquireonce.litmus new file mode 100644 index 000000000000..0b00cc7293ba --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+pooncerelease+poacquireonce.litmus @@ -0,0 +1,20 @@ +C MP+pooncerelease+poacquireonce + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + smp_store_release(y, 1); +} + +P1(int *x, int *y) +{ + int r0; + int r1; + + r0 = smp_load_acquire(y); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/MP+porevlocks.litmus b/tools/memory-model/litmus-tests/MP+porevlocks.litmus new file mode 100644 index 000000000000..90d011c34f33 --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+porevlocks.litmus @@ -0,0 +1,24 @@ +C MP+porevlocks + +{} + +P0(int *x, int *y, spinlock_t *mylock) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + spin_lock(mylock); + r1 = READ_ONCE(*x); + spin_unlock(mylock); +} + +P1(int *x, int *y, spinlock_t *mylock) +{ + spin_lock(mylock); + WRITE_ONCE(*x, 1); + spin_unlock(mylock); + WRITE_ONCE(*y, 1); +} + +exists (0:r0=1 /\ 0:r1=0) diff --git a/tools/memory-model/litmus-tests/MP+wmbonceonce+rmbonceonce.litmus b/tools/memory-model/litmus-tests/MP+wmbonceonce+rmbonceonce.litmus new file mode 100644 index 000000000000..604ad41ea0c2 --- /dev/null +++ b/tools/memory-model/litmus-tests/MP+wmbonceonce+rmbonceonce.litmus @@ -0,0 +1,22 @@ +C MP+wmbonceonce+rmbonceonce + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + smp_wmb(); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + smp_rmb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 1:r1=0) diff --git a/tools/memory-model/litmus-tests/R+mbonceonces.litmus b/tools/memory-model/litmus-tests/R+mbonceonces.litmus new file mode 100644 index 000000000000..e69b9e3e9436 --- /dev/null +++ b/tools/memory-model/litmus-tests/R+mbonceonces.litmus @@ -0,0 +1,21 @@ +C R+mbonceonces + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + smp_mb(); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*y, 2); + smp_mb(); + r0 = READ_ONCE(*x); +} + +exists (y=2 /\ 1:r0=0) diff --git a/tools/memory-model/litmus-tests/R+poonceonces.litmus b/tools/memory-model/litmus-tests/R+poonceonces.litmus new file mode 100644 index 000000000000..f7a12e00f82d --- /dev/null +++ b/tools/memory-model/litmus-tests/R+poonceonces.litmus @@ -0,0 +1,19 @@ +C R+poonceonces + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*y, 2); + r0 = READ_ONCE(*x); +} + +exists (y=2 /\ 1:r0=0) diff --git a/tools/memory-model/litmus-tests/README b/tools/memory-model/litmus-tests/README new file mode 100644 index 000000000000..9a3bb5949191 --- /dev/null +++ b/tools/memory-model/litmus-tests/README @@ -0,0 +1,125 @@ +This directory contains the following litmus tests: + +CoRR+poonceonce+Once.litmus + Test of read-read coherence, that is, whether or not two + successive reads from the same variable are ordered. + +CoRW+poonceonce+Once.litmus + Test of read-write coherence, that is, whether or not a read + from a given variable followed by a write to that same variable + are ordered. + +CoWR+poonceonce+Once.litmus + Test of write-read coherence, that is, whether or not a write + to a given variable followed by a read from that same variable + are ordered. + +CoWW+poonceonce.litmus + Test of write-write coherence, that is, whether or not two + successive writes to the same variable are ordered. + +IRIW+mbonceonces+OnceOnce.litmus + Test of independent reads from independent writes with smp_mb() + between each pairs of reads. In other words, is smp_mb() + sufficient to cause two different reading processes to agree on + the order of a pair of writes, where each write is to a different + variable by a different process. + +IRIW+poonceonces+OnceOnce.litmus + Test of independent reads from independent writes with nothing + between each pairs of reads. In other words, is anything at all + needed to cause two different reading processes to agree on the + order of a pair of writes, where each write is to a different + variable by a different process. + +ISA2+poonceonces.litmus + As below, but with store-release replaced with WRITE_ONCE() + and load-acquire replaced with READ_ONCE(). + +ISA2+pooncerelease+poacquirerelease+poacquireonce.litmus + Can a release-acquire chain order a prior store against + a later load? + +LB+ctrlonceonce+mbonceonce.litmus + Does a control dependency and an smp_mb() suffice for the + load-buffering litmus test, where each process reads from one + of two variables then writes to the other? + +LB+poacquireonce+pooncerelease.litmus + Does a release-acquire pair suffice for the load-buffering + litmus test, where each process reads from one of two variables then + writes to the other? + +LB+poonceonces.litmus + As above, but with store-release replaced with WRITE_ONCE() + and load-acquire replaced with READ_ONCE(). + +MP+onceassign+derefonce.litmus + As below, but with rcu_assign_pointer() and an rcu_dereference(). + +MP+polocks.litmus + As below, but with the second access of the writer process + and the first access of reader process protected by a lock. + +MP+poonceonces.litmus + As below, but without the smp_rmb() and smp_wmb(). + +MP+pooncerelease+poacquireonce.litmus + As below, but with a release-acquire chain. + +MP+porevlocks.litmus + As below, but with the first access of the writer process + and the second access of reader process protected by a lock. + +MP+wmbonceonce+rmbonceonce.litmus + Does a smp_wmb() (between the stores) and an smp_rmb() (between + the loads) suffice for the message-passing litmus test, where one + process writes data and then a flag, and the other process reads + the flag and then the data. (This is similar to the ISA2 tests, + but with two processes instead of three.) + +R+mbonceonces.litmus + This is the fully ordered (via smp_mb()) version of one of + the classic counterintuitive litmus tests that illustrates the + effects of store propagation delays. + +R+poonceonces.litmus + As above, but without the smp_mb() invocations. + +SB+mbonceonces.litmus + This is the fully ordered (again, via smp_mb() version of store + buffering, which forms the core of Dekker's mutual-exclusion + algorithm. + +SB+poonceonces.litmus + As above, but without the smp_mb() invocations. + +S+poonceonces.litmus + As below, but without the smp_wmb() and acquire load. + +S+wmbonceonce+poacquireonce.litmus + Can a smp_wmb(), instead of a release, and an acquire order + a prior store against a subsequent store? + +WRC+poonceonces+Once.litmus +WRC+pooncerelease+rmbonceonce+Once.litmus + These two are members of an extension of the MP litmus-test class + in which the first write is moved to a separate process. + +Z6.0+pooncelock+pooncelock+pombonce.litmus + Is the ordering provided by a spin_unlock() and a subsequent + spin_lock() sufficient to make ordering apparent to accesses + by a process not holding the lock? + +Z6.0+pooncelock+poonceLock+pombonce.litmus + As above, but with smp_mb__after_spinlock() immediately + following the spin_lock(). + +Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus + Is the ordering provided by a release-acquire chain sufficient + to make ordering apparent to accesses by a process that does + not participate in that release-acquire chain? + +A great many more litmus tests are available here: + + https://github.com/paulmckrcu/litmus diff --git a/tools/memory-model/litmus-tests/S+poonceonces.litmus b/tools/memory-model/litmus-tests/S+poonceonces.litmus new file mode 100644 index 000000000000..d0d541c8ec7d --- /dev/null +++ b/tools/memory-model/litmus-tests/S+poonceonces.litmus @@ -0,0 +1,19 @@ +C S+poonceonces + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 2); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*y); + WRITE_ONCE(*x, 1); +} + +exists (x=2 /\ 1:r0=1) diff --git a/tools/memory-model/litmus-tests/S+wmbonceonce+poacquireonce.litmus b/tools/memory-model/litmus-tests/S+wmbonceonce+poacquireonce.litmus new file mode 100644 index 000000000000..1d292d0d6603 --- /dev/null +++ b/tools/memory-model/litmus-tests/S+wmbonceonce+poacquireonce.litmus @@ -0,0 +1,20 @@ +C S+wmbonceonce+poacquireonce + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 2); + smp_wmb(); + WRITE_ONCE(*y, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = smp_load_acquire(y); + WRITE_ONCE(*x, 1); +} + +exists (x=2 /\ 1:r0=1) diff --git a/tools/memory-model/litmus-tests/SB+mbonceonces.litmus b/tools/memory-model/litmus-tests/SB+mbonceonces.litmus new file mode 100644 index 000000000000..b76caa5af1af --- /dev/null +++ b/tools/memory-model/litmus-tests/SB+mbonceonces.litmus @@ -0,0 +1,23 @@ +C SB+mbonceonces + +{} + +P0(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*x, 1); + smp_mb(); + r0 = READ_ONCE(*y); +} + +P1(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*y, 1); + smp_mb(); + r0 = READ_ONCE(*x); +} + +exists (0:r0=0 /\ 1:r0=0) diff --git a/tools/memory-model/litmus-tests/SB+poonceonces.litmus b/tools/memory-model/litmus-tests/SB+poonceonces.litmus new file mode 100644 index 000000000000..c1797e03807e --- /dev/null +++ b/tools/memory-model/litmus-tests/SB+poonceonces.litmus @@ -0,0 +1,21 @@ +C SB+poonceonces + +{} + +P0(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*x, 1); + r0 = READ_ONCE(*y); +} + +P1(int *x, int *y) +{ + int r0; + + WRITE_ONCE(*y, 1); + r0 = READ_ONCE(*x); +} + +exists (0:r0=0 /\ 1:r0=0) diff --git a/tools/memory-model/litmus-tests/WRC+poonceonces+Once.litmus b/tools/memory-model/litmus-tests/WRC+poonceonces+Once.litmus new file mode 100644 index 000000000000..f5e7c92f61cc --- /dev/null +++ b/tools/memory-model/litmus-tests/WRC+poonceonces+Once.litmus @@ -0,0 +1,27 @@ +C WRC+poonceonces+Once + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*x); + WRITE_ONCE(*y, 1); +} + +P2(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 2:r0=1 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/WRC+pooncerelease+rmbonceonce+Once.litmus b/tools/memory-model/litmus-tests/WRC+pooncerelease+rmbonceonce+Once.litmus new file mode 100644 index 000000000000..e3d0018025dd --- /dev/null +++ b/tools/memory-model/litmus-tests/WRC+pooncerelease+rmbonceonce+Once.litmus @@ -0,0 +1,28 @@ +C WRC+pooncerelease+rmbonceonce+Once + +{} + +P0(int *x) +{ + WRITE_ONCE(*x, 1); +} + +P1(int *x, int *y) +{ + int r0; + + r0 = READ_ONCE(*x); + smp_store_release(y, 1); +} + +P2(int *x, int *y) +{ + int r0; + int r1; + + r0 = READ_ONCE(*y); + smp_rmb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ 2:r0=1 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/Z6.0+pooncelock+poonceLock+pombonce.litmus b/tools/memory-model/litmus-tests/Z6.0+pooncelock+poonceLock+pombonce.litmus new file mode 100644 index 000000000000..9c2cb53e6ef0 --- /dev/null +++ b/tools/memory-model/litmus-tests/Z6.0+pooncelock+poonceLock+pombonce.litmus @@ -0,0 +1,33 @@ +C Z6.0+pooncelock+poonceLock+pombonce + +{} + +P0(int *x, int *y, spinlock_t *mylock) +{ + spin_lock(mylock); + WRITE_ONCE(*x, 1); + WRITE_ONCE(*y, 1); + spin_unlock(mylock); +} + +P1(int *y, int *z, spinlock_t *mylock) +{ + int r0; + + spin_lock(mylock); + smp_mb__after_spinlock(); + r0 = READ_ONCE(*y); + WRITE_ONCE(*z, 1); + spin_unlock(mylock); +} + +P2(int *x, int *z) +{ + int r1; + + WRITE_ONCE(*z, 2); + smp_mb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ z=2 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/Z6.0+pooncelock+pooncelock+pombonce.litmus b/tools/memory-model/litmus-tests/Z6.0+pooncelock+pooncelock+pombonce.litmus new file mode 100644 index 000000000000..c9a1f1a49ae1 --- /dev/null +++ b/tools/memory-model/litmus-tests/Z6.0+pooncelock+pooncelock+pombonce.litmus @@ -0,0 +1,32 @@ +C Z6.0+pooncelock+pooncelock+pombonce + +{} + +P0(int *x, int *y, spinlock_t *mylock) +{ + spin_lock(mylock); + WRITE_ONCE(*x, 1); + WRITE_ONCE(*y, 1); + spin_unlock(mylock); +} + +P1(int *y, int *z, spinlock_t *mylock) +{ + int r0; + + spin_lock(mylock); + r0 = READ_ONCE(*y); + WRITE_ONCE(*z, 1); + spin_unlock(mylock); +} + +P2(int *x, int *z) +{ + int r1; + + WRITE_ONCE(*z, 2); + smp_mb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ z=2 /\ 2:r1=0) diff --git a/tools/memory-model/litmus-tests/Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus b/tools/memory-model/litmus-tests/Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus new file mode 100644 index 000000000000..25409a033514 --- /dev/null +++ b/tools/memory-model/litmus-tests/Z6.0+pooncerelease+poacquirerelease+mbonceonce.litmus @@ -0,0 +1,28 @@ +C Z6.0+pooncerelease+poacquirerelease+mbonceonce + +{} + +P0(int *x, int *y) +{ + WRITE_ONCE(*x, 1); + smp_store_release(y, 1); +} + +P1(int *y, int *z) +{ + int r0; + + r0 = smp_load_acquire(y); + smp_store_release(z, 1); +} + +P2(int *x, int *z) +{ + int r1; + + WRITE_ONCE(*z, 2); + smp_mb(); + r1 = READ_ONCE(*x); +} + +exists (1:r0=1 /\ z=2 /\ 2:r1=0) diff --git a/tools/memory-model/lock.cat b/tools/memory-model/lock.cat new file mode 100644 index 000000000000..ba4a4ec6d313 --- /dev/null +++ b/tools/memory-model/lock.cat @@ -0,0 +1,99 @@ +// SPDX-License-Identifier: GPL-2.0+ +(* + * Copyright (C) 2016 Luc Maranget for Inria + * Copyright (C) 2017 Alan Stern + *) + +(* Generate coherence orders and handle lock operations *) + +include "cross.cat" + +(* From lock reads to their partner lock writes *) +let lk-rmw = ([LKR] ; po-loc ; [LKW]) \ (po ; po) +let rmw = rmw | lk-rmw + +(* + * A paired LKR must always see an unlocked value; spin_lock() calls nested + * inside a critical section (for the same lock) always deadlock. + *) +empty ([LKW] ; po-loc ; [domain(lk-rmw)]) \ (po-loc ; [UL] ; po-loc) + as lock-nest + +(* The litmus test is invalid if an LKW event is not part of an RMW pair *) +flag ~empty LKW \ range(lk-rmw) as unpaired-LKW + +(* This will be allowed if we implement spin_is_locked() *) +flag ~empty LKR \ domain(lk-rmw) as unpaired-LKR + +(* There should be no R or W accesses to spinlocks *) +let ALL-LOCKS = LKR | LKW | UL | LF +flag ~empty [M \ IW] ; loc ; [ALL-LOCKS] as mixed-lock-accesses + +(* The final value of a spinlock should not be tested *) +flag ~empty [FW] ; loc ; [ALL-LOCKS] as lock-final + + +(* + * Put lock operations in their appropriate classes, but leave UL out of W + * until after the co relation has been generated. + *) +let R = R | LKR | LF +let W = W | LKW + +let Release = Release | UL +let Acquire = Acquire | LKR + + +(* Match LKW events to their corresponding UL events *) +let critical = ([LKW] ; po-loc ; [UL]) \ (po-loc ; [LKW | UL] ; po-loc) + +flag ~empty UL \ range(critical) as unmatched-unlock + +(* Allow up to one unmatched LKW per location; more must deadlock *) +let UNMATCHED-LKW = LKW \ domain(critical) +empty ([UNMATCHED-LKW] ; loc ; [UNMATCHED-LKW]) \ id as unmatched-locks + + +(* rfi for LF events: link each LKW to the LF events in its critical section *) +let rfi-lf = ([LKW] ; po-loc ; [LF]) \ ([LKW] ; po-loc ; [UL] ; po-loc) + +(* rfe for LF events *) +let all-possible-rfe-lf = + (* + * Given an LF event r, compute the possible rfe edges for that event + * (all those starting from LKW events in other threads), + * and then convert that relation to a set of single-edge relations. + *) + let possible-rfe-lf r = + let pair-to-relation p = p ++ 0 + in map pair-to-relation ((LKW * {r}) & loc & ext) + (* Do this for each LF event r that isn't in rfi-lf *) + in map possible-rfe-lf (LF \ range(rfi-lf)) + +(* Generate all rf relations for LF events *) +with rfe-lf from cross(all-possible-rfe-lf) +let rf = rf | rfi-lf | rfe-lf + + +(* Generate all co relations, including LKW events but not UL *) +let co0 = co0 | ([IW] ; loc ; [LKW]) | + (([LKW] ; loc ; [UNMATCHED-LKW]) \ [UNMATCHED-LKW]) +include "cos-opt.cat" +let W = W | UL +let M = R | W + +(* Merge UL events into co *) +let co = (co | critical | (critical^-1 ; co))+ +let coe = co & ext +let coi = co & int + +(* Merge LKR events into rf *) +let rf = rf | ([IW | UL] ; singlestep(co) ; lk-rmw^-1) +let rfe = rf & ext +let rfi = rf & int + +let fr = rf^-1 ; co +let fre = fr & ext +let fri = fr & int + +show co,rf,fr