MLK-25349-3 PCI: imx: clear vreg bypass when pcie vph voltage is 3v3
Both 1.8v and 3.3v power supplies can be used by i.MX8MQ PCIe PHY. In default, the PCIE_VPH voltage is suggested to be 1.8v refer to data sheet. When PCIE_VPH is supplied by 3.3v in the HW schematic design, the VREG_BYPASS bits of GPR registers should be cleared from default value 1b'1 to 1b'0. Thus, the internal 3v3 to 1v8 translator would be turned on. Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com> Reviewed-by: Jun Li <jun.li@nxp.com> (cherry picked from commit 94e84f467b688ce79eb3239f1516f6009b75a19b) (cherry picked from commit 9ffc9044e99182f743ff272af71d8888f2d8665c) Signed-off-by: Andrey Zhizhikin <andrey.zhizhikin@leica-geosystems.com>
This commit is contained in:
parent
4e0f725087
commit
122206c61f
|
@ -46,6 +46,7 @@
|
|||
#define IMX8MQ_GPR_PCIE_REF_USE_PAD BIT(9)
|
||||
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE_EN BIT(10)
|
||||
#define IMX8MQ_GPR_PCIE_CLK_REQ_OVERRIDE BIT(11)
|
||||
#define IMX8MQ_GPR_PCIE_VREG_BYPASS BIT(12)
|
||||
#define IMX8MQ_GPR12_PCIE2_CTRL_DEVICE_TYPE GENMASK(11, 8)
|
||||
#define IMX8MQ_PCIE2_BASE_ADDR 0x33c00000
|
||||
#define IMX8_HSIO_PCIEB_BASE_ADDR 0x5f010000
|
||||
|
@ -144,6 +145,7 @@ struct imx6_pcie {
|
|||
u32 l1ss_clkreq;
|
||||
int link_gen;
|
||||
struct regulator *vpcie;
|
||||
struct regulator *vph;
|
||||
void __iomem *phy_base;
|
||||
void __iomem *hsmix_base;
|
||||
|
||||
|
@ -1596,6 +1598,17 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
|
|||
imx6_pcie_grp_offset(imx6_pcie),
|
||||
IMX8MQ_GPR_PCIE_REF_USE_PAD,
|
||||
IMX8MQ_GPR_PCIE_REF_USE_PAD);
|
||||
/*
|
||||
* Regarding to the datasheet, the PCIE_VPH is suggested
|
||||
* to be 1.8V. If the PCIE_VPH is supplied by 3.3V, the
|
||||
* VREG_BYPASS should be cleared to zero.
|
||||
*/
|
||||
if (imx6_pcie->vph &&
|
||||
regulator_get_voltage(imx6_pcie->vph) > 3000000)
|
||||
regmap_update_bits(imx6_pcie->iomuxc_gpr,
|
||||
imx6_pcie_grp_offset(imx6_pcie),
|
||||
IMX8MQ_GPR_PCIE_VREG_BYPASS,
|
||||
0);
|
||||
break;
|
||||
case IMX8MP:
|
||||
case IMX8MP_EP:
|
||||
|
@ -2685,6 +2698,13 @@ static int imx6_pcie_probe(struct platform_device *pdev)
|
|||
imx6_pcie->vpcie = NULL;
|
||||
}
|
||||
|
||||
imx6_pcie->vph = devm_regulator_get_optional(&pdev->dev, "vph");
|
||||
if (IS_ERR(imx6_pcie->vph)) {
|
||||
if (PTR_ERR(imx6_pcie->vph) != -ENODEV)
|
||||
return PTR_ERR(imx6_pcie->vph);
|
||||
imx6_pcie->vph = NULL;
|
||||
}
|
||||
|
||||
platform_set_drvdata(pdev, imx6_pcie);
|
||||
|
||||
ret = imx6_pcie_attach_pd(dev);
|
||||
|
|
Loading…
Reference in New Issue