netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/ip.h>
|
|
|
|
|
#include <linux/netfilter.h>
|
|
|
|
|
#include <linux/netfilter_ipv6.h>
|
|
|
|
|
#include <linux/netfilter_bridge.h>
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
|
#include <linux/icmp.h>
|
|
|
|
|
#include <linux/sysctl.h>
|
|
|
|
|
#include <net/route.h>
|
|
|
|
|
#include <net/ip.h>
|
|
|
|
|
|
|
|
|
|
#include <net/netfilter/nf_conntrack.h>
|
|
|
|
|
#include <net/netfilter/nf_conntrack_core.h>
|
|
|
|
|
#include <net/netfilter/nf_conntrack_helper.h>
|
|
|
|
|
#include <net/netfilter/nf_conntrack_bridge.h>
|
|
|
|
|
|
|
|
|
|
#include <linux/netfilter/nf_tables.h>
|
|
|
|
|
#include <net/netfilter/nf_tables.h>
|
|
|
|
|
|
|
|
|
|
#include "../br_private.h"
|
|
|
|
|
|
|
|
|
|
/* Best effort variant of ip_do_fragment which preserves geometry, unless skbuff
|
|
|
|
|
* has been linearized or cloned.
|
|
|
|
|
*/
|
|
|
|
|
static int nf_br_ip_fragment(struct net *net, struct sock *sk,
|
|
|
|
|
struct sk_buff *skb,
|
2019-09-13 17:13:09 +09:00
|
|
|
struct nf_bridge_frag_data *data,
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
int (*output)(struct net *, struct sock *sk,
|
2019-09-13 17:13:09 +09:00
|
|
|
const struct nf_bridge_frag_data *data,
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
struct sk_buff *))
|
|
|
|
|
{
|
|
|
|
|
int frag_max_size = BR_INPUT_SKB_CB(skb)->frag_max_size;
|
|
|
|
|
unsigned int hlen, ll_rs, mtu;
|
2019-10-17 10:00:56 +09:00
|
|
|
ktime_t tstamp = skb->tstamp;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
struct ip_frag_state state;
|
|
|
|
|
struct iphdr *iph;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
/* for offloaded checksums cleanup checksum before fragmentation */
|
|
|
|
|
if (skb->ip_summed == CHECKSUM_PARTIAL &&
|
|
|
|
|
(err = skb_checksum_help(skb)))
|
|
|
|
|
goto blackhole;
|
|
|
|
|
|
|
|
|
|
iph = ip_hdr(skb);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Setup starting values
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
hlen = iph->ihl * 4;
|
|
|
|
|
frag_max_size -= hlen;
|
|
|
|
|
ll_rs = LL_RESERVED_SPACE(skb->dev);
|
|
|
|
|
mtu = skb->dev->mtu;
|
|
|
|
|
|
|
|
|
|
if (skb_has_frag_list(skb)) {
|
|
|
|
|
unsigned int first_len = skb_pagelen(skb);
|
|
|
|
|
struct ip_fraglist_iter iter;
|
|
|
|
|
struct sk_buff *frag;
|
|
|
|
|
|
|
|
|
|
if (first_len - hlen > mtu ||
|
|
|
|
|
skb_headroom(skb) < ll_rs)
|
|
|
|
|
goto blackhole;
|
|
|
|
|
|
|
|
|
|
if (skb_cloned(skb))
|
|
|
|
|
goto slow_path;
|
|
|
|
|
|
|
|
|
|
skb_walk_frags(skb, frag) {
|
|
|
|
|
if (frag->len > mtu ||
|
|
|
|
|
skb_headroom(frag) < hlen + ll_rs)
|
|
|
|
|
goto blackhole;
|
|
|
|
|
|
|
|
|
|
if (skb_shared(frag))
|
|
|
|
|
goto slow_path;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ip_fraglist_init(skb, iph, hlen, &iter);
|
|
|
|
|
|
|
|
|
|
for (;;) {
|
|
|
|
|
if (iter.frag)
|
|
|
|
|
ip_fraglist_prepare(skb, &iter);
|
|
|
|
|
|
2019-10-17 10:00:56 +09:00
|
|
|
skb->tstamp = tstamp;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
err = output(net, sk, data, skb);
|
|
|
|
|
if (err || !iter.frag)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
skb = ip_fraglist_next(&iter);
|
|
|
|
|
}
|
2021-07-29 17:20:21 +09:00
|
|
|
|
|
|
|
|
if (!err)
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
kfree_skb_list(iter.frag);
|
|
|
|
|
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
slow_path:
|
|
|
|
|
/* This is a linearized skbuff, the original geometry is lost for us.
|
|
|
|
|
* This may also be a clone skbuff, we could preserve the geometry for
|
|
|
|
|
* the copies but probably not worth the effort.
|
|
|
|
|
*/
|
2019-10-20 01:26:37 +09:00
|
|
|
ip_frag_init(skb, hlen, ll_rs, frag_max_size, false, &state);
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
|
|
|
|
|
while (state.left > 0) {
|
|
|
|
|
struct sk_buff *skb2;
|
|
|
|
|
|
|
|
|
|
skb2 = ip_frag_next(skb, &state);
|
|
|
|
|
if (IS_ERR(skb2)) {
|
|
|
|
|
err = PTR_ERR(skb2);
|
|
|
|
|
goto blackhole;
|
|
|
|
|
}
|
|
|
|
|
|
2019-10-17 10:00:56 +09:00
|
|
|
skb2->tstamp = tstamp;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
err = output(net, sk, data, skb2);
|
|
|
|
|
if (err)
|
|
|
|
|
goto blackhole;
|
|
|
|
|
}
|
|
|
|
|
consume_skb(skb);
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
blackhole:
|
|
|
|
|
kfree_skb(skb);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* ip_defrag() expects IPCB() in place. */
|
|
|
|
|
static void br_skb_cb_save(struct sk_buff *skb, struct br_input_skb_cb *cb,
|
|
|
|
|
size_t inet_skb_parm_size)
|
|
|
|
|
{
|
|
|
|
|
memcpy(cb, skb->cb, sizeof(*cb));
|
|
|
|
|
memset(skb->cb, 0, inet_skb_parm_size);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void br_skb_cb_restore(struct sk_buff *skb,
|
|
|
|
|
const struct br_input_skb_cb *cb,
|
|
|
|
|
u16 fragsz)
|
|
|
|
|
{
|
|
|
|
|
memcpy(skb->cb, cb, sizeof(*cb));
|
|
|
|
|
BR_INPUT_SKB_CB(skb)->frag_max_size = fragsz;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int nf_ct_br_defrag4(struct sk_buff *skb,
|
|
|
|
|
const struct nf_hook_state *state)
|
|
|
|
|
{
|
|
|
|
|
u16 zone_id = NF_CT_DEFAULT_ZONE_ID;
|
|
|
|
|
enum ip_conntrack_info ctinfo;
|
|
|
|
|
struct br_input_skb_cb cb;
|
|
|
|
|
const struct nf_conn *ct;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
if (!ip_is_fragment(ip_hdr(skb)))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
ct = nf_ct_get(skb, &ctinfo);
|
|
|
|
|
if (ct)
|
|
|
|
|
zone_id = nf_ct_zone_id(nf_ct_zone(ct), CTINFO2DIR(ctinfo));
|
|
|
|
|
|
|
|
|
|
br_skb_cb_save(skb, &cb, sizeof(struct inet_skb_parm));
|
|
|
|
|
local_bh_disable();
|
|
|
|
|
err = ip_defrag(state->net, skb,
|
|
|
|
|
IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
|
|
|
|
|
local_bh_enable();
|
|
|
|
|
if (!err) {
|
|
|
|
|
br_skb_cb_restore(skb, &cb, IPCB(skb)->frag_max_size);
|
|
|
|
|
skb->ignore_df = 1;
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return NF_STOLEN;
|
|
|
|
|
}
|
|
|
|
|
|
2019-05-29 20:25:38 +09:00
|
|
|
static unsigned int nf_ct_br_defrag6(struct sk_buff *skb,
|
|
|
|
|
const struct nf_hook_state *state)
|
|
|
|
|
{
|
2020-08-10 20:52:15 +09:00
|
|
|
#if IS_ENABLED(CONFIG_NF_DEFRAG_IPV6)
|
2019-05-29 20:25:38 +09:00
|
|
|
u16 zone_id = NF_CT_DEFAULT_ZONE_ID;
|
|
|
|
|
enum ip_conntrack_info ctinfo;
|
|
|
|
|
struct br_input_skb_cb cb;
|
|
|
|
|
const struct nf_conn *ct;
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
ct = nf_ct_get(skb, &ctinfo);
|
|
|
|
|
if (ct)
|
|
|
|
|
zone_id = nf_ct_zone_id(nf_ct_zone(ct), CTINFO2DIR(ctinfo));
|
|
|
|
|
|
|
|
|
|
br_skb_cb_save(skb, &cb, sizeof(struct inet6_skb_parm));
|
|
|
|
|
|
2020-08-10 20:52:15 +09:00
|
|
|
err = nf_ct_frag6_gather(state->net, skb,
|
|
|
|
|
IP_DEFRAG_CONNTRACK_BRIDGE_IN + zone_id);
|
2019-05-29 20:25:38 +09:00
|
|
|
/* queued */
|
|
|
|
|
if (err == -EINPROGRESS)
|
|
|
|
|
return NF_STOLEN;
|
|
|
|
|
|
|
|
|
|
br_skb_cb_restore(skb, &cb, IP6CB(skb)->frag_max_size);
|
|
|
|
|
return err == 0 ? NF_ACCEPT : NF_DROP;
|
2020-08-10 20:52:15 +09:00
|
|
|
#else
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
#endif
|
2019-05-29 20:25:38 +09:00
|
|
|
}
|
|
|
|
|
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
static int nf_ct_br_ip_check(const struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
const struct iphdr *iph;
|
|
|
|
|
int nhoff, len;
|
|
|
|
|
|
|
|
|
|
nhoff = skb_network_offset(skb);
|
|
|
|
|
iph = ip_hdr(skb);
|
|
|
|
|
if (iph->ihl < 5 ||
|
|
|
|
|
iph->version != 4)
|
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
len = ntohs(iph->tot_len);
|
|
|
|
|
if (skb->len < nhoff + len ||
|
|
|
|
|
len < (iph->ihl * 4))
|
2019-05-29 20:25:38 +09:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int nf_ct_br_ipv6_check(const struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
const struct ipv6hdr *hdr;
|
|
|
|
|
int nhoff, len;
|
|
|
|
|
|
|
|
|
|
nhoff = skb_network_offset(skb);
|
|
|
|
|
hdr = ipv6_hdr(skb);
|
|
|
|
|
if (hdr->version != 6)
|
|
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
len = ntohs(hdr->payload_len) + sizeof(struct ipv6hdr) + nhoff;
|
|
|
|
|
if (skb->len < len)
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int nf_ct_bridge_pre(void *priv, struct sk_buff *skb,
|
|
|
|
|
const struct nf_hook_state *state)
|
|
|
|
|
{
|
|
|
|
|
struct nf_hook_state bridge_state = *state;
|
|
|
|
|
enum ip_conntrack_info ctinfo;
|
|
|
|
|
struct nf_conn *ct;
|
|
|
|
|
u32 len;
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ct = nf_ct_get(skb, &ctinfo);
|
|
|
|
|
if ((ct && !nf_ct_is_template(ct)) ||
|
|
|
|
|
ctinfo == IP_CT_UNTRACKED)
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
switch (skb->protocol) {
|
|
|
|
|
case htons(ETH_P_IP):
|
|
|
|
|
if (!pskb_may_pull(skb, sizeof(struct iphdr)))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
len = ntohs(ip_hdr(skb)->tot_len);
|
|
|
|
|
if (pskb_trim_rcsum(skb, len))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
if (nf_ct_br_ip_check(skb))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
bridge_state.pf = NFPROTO_IPV4;
|
|
|
|
|
ret = nf_ct_br_defrag4(skb, &bridge_state);
|
|
|
|
|
break;
|
|
|
|
|
case htons(ETH_P_IPV6):
|
2019-05-29 20:25:38 +09:00
|
|
|
if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
len = sizeof(struct ipv6hdr) + ntohs(ipv6_hdr(skb)->payload_len);
|
|
|
|
|
if (pskb_trim_rcsum(skb, len))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
if (nf_ct_br_ipv6_check(skb))
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
bridge_state.pf = NFPROTO_IPV6;
|
|
|
|
|
ret = nf_ct_br_defrag6(skb, &bridge_state);
|
|
|
|
|
break;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
default:
|
|
|
|
|
nf_ct_set(skb, NULL, IP_CT_UNTRACKED);
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (ret != NF_ACCEPT)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
return nf_conntrack_in(skb, &bridge_state);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void nf_ct_bridge_frag_save(struct sk_buff *skb,
|
2019-09-13 17:13:09 +09:00
|
|
|
struct nf_bridge_frag_data *data)
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
{
|
|
|
|
|
if (skb_vlan_tag_present(skb)) {
|
|
|
|
|
data->vlan_present = true;
|
|
|
|
|
data->vlan_tci = skb->vlan_tci;
|
|
|
|
|
data->vlan_proto = skb->vlan_proto;
|
|
|
|
|
} else {
|
|
|
|
|
data->vlan_present = false;
|
|
|
|
|
}
|
|
|
|
|
skb_copy_from_linear_data_offset(skb, -ETH_HLEN, data->mac, ETH_HLEN);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int
|
|
|
|
|
nf_ct_bridge_refrag(struct sk_buff *skb, const struct nf_hook_state *state,
|
|
|
|
|
int (*output)(struct net *, struct sock *sk,
|
2019-09-13 17:13:09 +09:00
|
|
|
const struct nf_bridge_frag_data *data,
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
struct sk_buff *))
|
|
|
|
|
{
|
2019-09-13 17:13:09 +09:00
|
|
|
struct nf_bridge_frag_data data;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
|
|
|
|
|
if (!BR_INPUT_SKB_CB(skb)->frag_max_size)
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
|
|
|
|
|
nf_ct_bridge_frag_save(skb, &data);
|
|
|
|
|
switch (skb->protocol) {
|
|
|
|
|
case htons(ETH_P_IP):
|
|
|
|
|
nf_br_ip_fragment(state->net, state->sk, skb, &data, output);
|
|
|
|
|
break;
|
|
|
|
|
case htons(ETH_P_IPV6):
|
2019-05-29 20:25:38 +09:00
|
|
|
nf_br_ip6_fragment(state->net, state->sk, skb, &data, output);
|
|
|
|
|
break;
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
default:
|
|
|
|
|
WARN_ON_ONCE(1);
|
|
|
|
|
return NF_DROP;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return NF_STOLEN;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Actually only slow path refragmentation needs this. */
|
|
|
|
|
static int nf_ct_bridge_frag_restore(struct sk_buff *skb,
|
2019-09-13 17:13:09 +09:00
|
|
|
const struct nf_bridge_frag_data *data)
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
{
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
err = skb_cow_head(skb, ETH_HLEN);
|
|
|
|
|
if (err) {
|
|
|
|
|
kfree_skb(skb);
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
}
|
|
|
|
|
if (data->vlan_present)
|
|
|
|
|
__vlan_hwaccel_put_tag(skb, data->vlan_proto, data->vlan_tci);
|
2019-06-19 23:35:07 +09:00
|
|
|
else if (skb_vlan_tag_present(skb))
|
|
|
|
|
__vlan_hwaccel_clear_tag(skb);
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
|
|
|
|
|
skb_copy_to_linear_data_offset(skb, -ETH_HLEN, data->mac, ETH_HLEN);
|
|
|
|
|
skb_reset_mac_header(skb);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int nf_ct_bridge_refrag_post(struct net *net, struct sock *sk,
|
2019-09-13 17:13:09 +09:00
|
|
|
const struct nf_bridge_frag_data *data,
|
netfilter: bridge: add connection tracking system
This patch adds basic connection tracking support for the bridge,
including initial IPv4 support.
This patch register two hooks to deal with the bridge forwarding path,
one from the bridge prerouting hook to call nf_conntrack_in(); and
another from the bridge postrouting hook to confirm the entry.
The conntrack bridge prerouting hook defragments packets before passing
them to nf_conntrack_in() to look up for an existing entry, otherwise a
new entry is allocated and it is attached to the skbuff. The conntrack
bridge postrouting hook confirms new conntrack entries, ie. if this is
the first packet seen, then it adds the entry to the hashtable and (if
needed) it refragments the skbuff into the original fragments, leaving
the geometry as is if possible. Exceptions are linearized skbuffs, eg.
skbuffs that are passed up to nfqueue and conntrack helpers, as well as
cloned skbuff for the local delivery (eg. tcpdump), also in case of
bridge port flooding (cloned skbuff too).
The packet defragmentation is done through the ip_defrag() call. This
forces us to save the bridge control buffer, reset the IP control buffer
area and then restore it after call. This function also bumps the IP
fragmentation statistics, it would be probably desiderable to have
independent statistics for the bridge defragmentation/refragmentation.
The maximum fragment length is stored in the control buffer and it is
used to refragment the skbuff from the postrouting path.
The new fraglist splitter and fragment transformer APIs are used to
implement the bridge refragmentation code. The br_ip_fragment() function
drops the packet in case the maximum fragment size seen is larger than
the output port MTU.
This patchset follows the principle that conntrack should not drop
packets, so users can do it through policy via invalid state matching.
Like br_netfilter, there is no refragmentation for packets that are
passed up for local delivery, ie. prerouting -> input path. There are
calls to nf_reset() already in several spots in the stack since time ago
already, eg. af_packet, that show that skbuff fraglist handling from the
netif_rx path is supported already.
The helpers are called from the postrouting hook, before confirmation,
from there we may see packet floods to bridge ports. Then, although
unlikely, this may result in exercising the helpers many times for each
clone. It would be good to explore how to pass all the packets in a list
to the conntrack hook to do this handle only once for this case.
Thanks to Florian Westphal for handing me over an initial patchset
version to add support for conntrack bridge.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-29 20:25:37 +09:00
|
|
|
struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
err = nf_ct_bridge_frag_restore(skb, data);
|
|
|
|
|
if (err < 0)
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
return br_dev_queue_push_xmit(net, sk, skb);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int nf_ct_bridge_confirm(struct sk_buff *skb)
|
|
|
|
|
{
|
|
|
|
|
enum ip_conntrack_info ctinfo;
|
|
|
|
|
struct nf_conn *ct;
|
|
|
|
|
int protoff;
|
|
|
|
|
|
|
|
|
|
ct = nf_ct_get(skb, &ctinfo);
|
|
|
|
|
if (!ct || ctinfo == IP_CT_RELATED_REPLY)
|
|
|
|
|
return nf_conntrack_confirm(skb);
|
|
|
|
|
|
|
|
|
|
switch (skb->protocol) {
|
|
|
|
|
case htons(ETH_P_IP):
|
|
|
|
|
protoff = skb_network_offset(skb) + ip_hdrlen(skb);
|
|
|
|
|
break;
|
|
|
|
|
case htons(ETH_P_IPV6): {
|
|
|
|
|
unsigned char pnum = ipv6_hdr(skb)->nexthdr;
|
|
|
|
|
__be16 frag_off;
|
|
|
|
|
|
|
|
|
|
protoff = ipv6_skip_exthdr(skb, sizeof(struct ipv6hdr), &pnum,
|
|
|
|
|
&frag_off);
|
|
|
|
|
if (protoff < 0 || (frag_off & htons(~0x7)) != 0)
|
|
|
|
|
return nf_conntrack_confirm(skb);
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
return NF_ACCEPT;
|
|
|
|
|
}
|
|
|
|
|
return nf_confirm(skb, protoff, ct, ctinfo);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static unsigned int nf_ct_bridge_post(void *priv, struct sk_buff *skb,
|
|
|
|
|
const struct nf_hook_state *state)
|
|
|
|
|
{
|
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
|
|
ret = nf_ct_bridge_confirm(skb);
|
|
|
|
|
if (ret != NF_ACCEPT)
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
|
|
return nf_ct_bridge_refrag(skb, state, nf_ct_bridge_refrag_post);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct nf_hook_ops nf_ct_bridge_hook_ops[] __read_mostly = {
|
|
|
|
|
{
|
|
|
|
|
.hook = nf_ct_bridge_pre,
|
|
|
|
|
.pf = NFPROTO_BRIDGE,
|
|
|
|
|
.hooknum = NF_BR_PRE_ROUTING,
|
|
|
|
|
.priority = NF_IP_PRI_CONNTRACK,
|
|
|
|
|
},
|
|
|
|
|
{
|
|
|
|
|
.hook = nf_ct_bridge_post,
|
|
|
|
|
.pf = NFPROTO_BRIDGE,
|
|
|
|
|
.hooknum = NF_BR_POST_ROUTING,
|
|
|
|
|
.priority = NF_IP_PRI_CONNTRACK_CONFIRM,
|
|
|
|
|
},
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static struct nf_ct_bridge_info bridge_info = {
|
|
|
|
|
.ops = nf_ct_bridge_hook_ops,
|
|
|
|
|
.ops_size = ARRAY_SIZE(nf_ct_bridge_hook_ops),
|
|
|
|
|
.me = THIS_MODULE,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static int __init nf_conntrack_l3proto_bridge_init(void)
|
|
|
|
|
{
|
|
|
|
|
nf_ct_bridge_register(&bridge_info);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void __exit nf_conntrack_l3proto_bridge_fini(void)
|
|
|
|
|
{
|
|
|
|
|
nf_ct_bridge_unregister(&bridge_info);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
module_init(nf_conntrack_l3proto_bridge_init);
|
|
|
|
|
module_exit(nf_conntrack_l3proto_bridge_fini);
|
|
|
|
|
|
|
|
|
|
MODULE_ALIAS("nf_conntrack-" __stringify(AF_BRIDGE));
|
|
|
|
|
MODULE_LICENSE("GPL");
|