linux-brain/drivers/infiniband/core/device.c

2590 lines
69 KiB
C
Raw Normal View History

/*
* Copyright (c) 2004 Topspin Communications. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/netdevice.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <linux/security.h>
#include <linux/notifier.h>
#include <linux/hashtable.h>
#include <rdma/rdma_netlink.h>
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
#include <rdma/ib_addr.h>
#include <rdma/ib_cache.h>
#include "core_priv.h"
#include "restrack.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("core kernel InfiniBand API");
MODULE_LICENSE("Dual BSD/GPL");
struct workqueue_struct *ib_comp_wq;
struct workqueue_struct *ib_comp_unbound_wq;
struct workqueue_struct *ib_wq;
EXPORT_SYMBOL_GPL(ib_wq);
/*
* Each of the three rwsem locks (devices, clients, client_data) protects the
* xarray of the same name. Specifically it allows the caller to assert that
* the MARK will/will not be changing under the lock, and for devices and
* clients, that the value in the xarray is still a valid pointer. Change of
* the MARK is linked to the object state, so holding the lock and testing the
* MARK also asserts that the contained object is in a certain state.
*
* This is used to build a two stage register/unregister flow where objects
* can continue to be in the xarray even though they are still in progress to
* register/unregister.
*
* The xarray itself provides additional locking, and restartable iteration,
* which is also relied on.
*
* Locks should not be nested, with the exception of client_data, which is
* allowed to nest under the read side of the other two locks.
*
* The devices_rwsem also protects the device name list, any change or
* assignment of device name must also hold the write side to guarantee unique
* names.
*/
/*
* devices contains devices that have had their names assigned. The
* devices may not be registered. Users that care about the registration
* status need to call ib_device_try_get() on the device to ensure it is
* registered, and keep it registered, for the required duration.
*
*/
static DEFINE_XARRAY_FLAGS(devices, XA_FLAGS_ALLOC);
static DECLARE_RWSEM(devices_rwsem);
#define DEVICE_REGISTERED XA_MARK_1
static LIST_HEAD(client_list);
#define CLIENT_REGISTERED XA_MARK_1
static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC);
static DECLARE_RWSEM(clients_rwsem);
/*
* If client_data is registered then the corresponding client must also still
* be registered.
*/
#define CLIENT_DATA_REGISTERED XA_MARK_1
/**
* struct rdma_dev_net - rdma net namespace metadata for a net
* @net: Pointer to owner net namespace
* @id: xarray id to identify the net namespace.
*/
struct rdma_dev_net {
possible_net_t net;
u32 id;
};
static unsigned int rdma_dev_net_id;
/*
* A list of net namespaces is maintained in an xarray. This is necessary
* because we can't get the locking right using the existing net ns list. We
* would require a init_net callback after the list is updated.
*/
static DEFINE_XARRAY_FLAGS(rdma_nets, XA_FLAGS_ALLOC);
/*
* rwsem to protect accessing the rdma_nets xarray entries.
*/
static DECLARE_RWSEM(rdma_nets_rwsem);
bool ib_devices_shared_netns = true;
module_param_named(netns_mode, ib_devices_shared_netns, bool, 0444);
MODULE_PARM_DESC(netns_mode,
"Share device among net namespaces; default=1 (shared)");
/**
* rdma_dev_access_netns() - Return whether a rdma device can be accessed
* from a specified net namespace or not.
* @device: Pointer to rdma device which needs to be checked
* @net: Pointer to net namesapce for which access to be checked
*
* rdma_dev_access_netns() - Return whether a rdma device can be accessed
* from a specified net namespace or not. When
* rdma device is in shared mode, it ignores the
* net namespace. When rdma device is exclusive
* to a net namespace, rdma device net namespace is
* checked against the specified one.
*/
bool rdma_dev_access_netns(const struct ib_device *dev, const struct net *net)
{
return (ib_devices_shared_netns ||
net_eq(read_pnet(&dev->coredev.rdma_net), net));
}
EXPORT_SYMBOL(rdma_dev_access_netns);
/*
* xarray has this behavior where it won't iterate over NULL values stored in
* allocated arrays. So we need our own iterator to see all values stored in
* the array. This does the same thing as xa_for_each except that it also
* returns NULL valued entries if the array is allocating. Simplified to only
* work on simple xarrays.
*/
static void *xan_find_marked(struct xarray *xa, unsigned long *indexp,
xa_mark_t filter)
{
XA_STATE(xas, xa, *indexp);
void *entry;
rcu_read_lock();
do {
entry = xas_find_marked(&xas, ULONG_MAX, filter);
if (xa_is_zero(entry))
break;
} while (xas_retry(&xas, entry));
rcu_read_unlock();
if (entry) {
*indexp = xas.xa_index;
if (xa_is_zero(entry))
return NULL;
return entry;
}
return XA_ERROR(-ENOENT);
}
#define xan_for_each_marked(xa, index, entry, filter) \
for (index = 0, entry = xan_find_marked(xa, &(index), filter); \
!xa_is_err(entry); \
(index)++, entry = xan_find_marked(xa, &(index), filter))
/* RCU hash table mapping netdevice pointers to struct ib_port_data */
static DEFINE_SPINLOCK(ndev_hash_lock);
static DECLARE_HASHTABLE(ndev_hash, 5);
static void free_netdevs(struct ib_device *ib_dev);
static void ib_unregister_work(struct work_struct *work);
static void __ib_unregister_device(struct ib_device *device);
static int ib_security_change(struct notifier_block *nb, unsigned long event,
void *lsm_data);
static void ib_policy_change_task(struct work_struct *work);
static DECLARE_WORK(ib_policy_change_work, ib_policy_change_task);
static void __ibdev_printk(const char *level, const struct ib_device *ibdev,
struct va_format *vaf)
{
if (ibdev && ibdev->dev.parent)
dev_printk_emit(level[1] - '0',
ibdev->dev.parent,
"%s %s %s: %pV",
dev_driver_string(ibdev->dev.parent),
dev_name(ibdev->dev.parent),
dev_name(&ibdev->dev),
vaf);
else if (ibdev)
printk("%s%s: %pV",
level, dev_name(&ibdev->dev), vaf);
else
printk("%s(NULL ib_device): %pV", level, vaf);
}
void ibdev_printk(const char *level, const struct ib_device *ibdev,
const char *format, ...)
{
struct va_format vaf;
va_list args;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
__ibdev_printk(level, ibdev, &vaf);
va_end(args);
}
EXPORT_SYMBOL(ibdev_printk);
#define define_ibdev_printk_level(func, level) \
void func(const struct ib_device *ibdev, const char *fmt, ...) \
{ \
struct va_format vaf; \
va_list args; \
\
va_start(args, fmt); \
\
vaf.fmt = fmt; \
vaf.va = &args; \
\
__ibdev_printk(level, ibdev, &vaf); \
\
va_end(args); \
} \
EXPORT_SYMBOL(func);
define_ibdev_printk_level(ibdev_emerg, KERN_EMERG);
define_ibdev_printk_level(ibdev_alert, KERN_ALERT);
define_ibdev_printk_level(ibdev_crit, KERN_CRIT);
define_ibdev_printk_level(ibdev_err, KERN_ERR);
define_ibdev_printk_level(ibdev_warn, KERN_WARNING);
define_ibdev_printk_level(ibdev_notice, KERN_NOTICE);
define_ibdev_printk_level(ibdev_info, KERN_INFO);
static struct notifier_block ibdev_lsm_nb = {
.notifier_call = ib_security_change,
};
static int rdma_dev_change_netns(struct ib_device *device, struct net *cur_net,
struct net *net);
/* Pointer to the RCU head at the start of the ib_port_data array */
struct ib_port_data_rcu {
struct rcu_head rcu_head;
struct ib_port_data pdata[];
};
static int ib_device_check_mandatory(struct ib_device *device)
{
#define IB_MANDATORY_FUNC(x) { offsetof(struct ib_device_ops, x), #x }
static const struct {
size_t offset;
char *name;
} mandatory_table[] = {
IB_MANDATORY_FUNC(query_device),
IB_MANDATORY_FUNC(query_port),
IB_MANDATORY_FUNC(query_pkey),
IB_MANDATORY_FUNC(alloc_pd),
IB_MANDATORY_FUNC(dealloc_pd),
IB_MANDATORY_FUNC(create_qp),
IB_MANDATORY_FUNC(modify_qp),
IB_MANDATORY_FUNC(destroy_qp),
IB_MANDATORY_FUNC(post_send),
IB_MANDATORY_FUNC(post_recv),
IB_MANDATORY_FUNC(create_cq),
IB_MANDATORY_FUNC(destroy_cq),
IB_MANDATORY_FUNC(poll_cq),
IB_MANDATORY_FUNC(req_notify_cq),
IB_MANDATORY_FUNC(get_dma_mr),
IB_MANDATORY_FUNC(dereg_mr),
IB_MANDATORY_FUNC(get_port_immutable)
};
int i;
device->kverbs_provider = true;
for (i = 0; i < ARRAY_SIZE(mandatory_table); ++i) {
if (!*(void **) ((void *) &device->ops +
mandatory_table[i].offset)) {
device->kverbs_provider = false;
break;
}
}
return 0;
}
/*
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
* Caller must perform ib_device_put() to return the device reference count
* when ib_device_get_by_index() returns valid device pointer.
*/
struct ib_device *ib_device_get_by_index(const struct net *net, u32 index)
{
struct ib_device *device;
down_read(&devices_rwsem);
device = xa_load(&devices, index);
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
if (device) {
if (!rdma_dev_access_netns(device, net)) {
device = NULL;
goto out;
}
if (!ib_device_try_get(device))
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
device = NULL;
}
out:
up_read(&devices_rwsem);
return device;
}
/**
* ib_device_put - Release IB device reference
* @device: device whose reference to be released
*
* ib_device_put() releases reference to the IB device to allow it to be
* unregistered and eventually free.
*/
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
void ib_device_put(struct ib_device *device)
{
if (refcount_dec_and_test(&device->refcount))
complete(&device->unreg_completion);
}
EXPORT_SYMBOL(ib_device_put);
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
static struct ib_device *__ib_device_get_by_name(const char *name)
{
struct ib_device *device;
unsigned long index;
xa_for_each (&devices, index, device)
if (!strcmp(name, dev_name(&device->dev)))
return device;
return NULL;
}
/**
* ib_device_get_by_name - Find an IB device by name
* @name: The name to look for
* @driver_id: The driver ID that must match (RDMA_DRIVER_UNKNOWN matches all)
*
* Find and hold an ib_device by its name. The caller must call
* ib_device_put() on the returned pointer.
*/
struct ib_device *ib_device_get_by_name(const char *name,
enum rdma_driver_id driver_id)
{
struct ib_device *device;
down_read(&devices_rwsem);
device = __ib_device_get_by_name(name);
if (device && driver_id != RDMA_DRIVER_UNKNOWN &&
device->driver_id != driver_id)
device = NULL;
if (device) {
if (!ib_device_try_get(device))
device = NULL;
}
up_read(&devices_rwsem);
return device;
}
EXPORT_SYMBOL(ib_device_get_by_name);
static int rename_compat_devs(struct ib_device *device)
{
struct ib_core_device *cdev;
unsigned long index;
int ret = 0;
mutex_lock(&device->compat_devs_mutex);
xa_for_each (&device->compat_devs, index, cdev) {
ret = device_rename(&cdev->dev, dev_name(&device->dev));
if (ret) {
dev_warn(&cdev->dev,
"Fail to rename compatdev to new name %s\n",
dev_name(&device->dev));
break;
}
}
mutex_unlock(&device->compat_devs_mutex);
return ret;
}
int ib_device_rename(struct ib_device *ibdev, const char *name)
{
RDMA/srp: Rename SRP sysfs name after IB device rename trigger SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-17 21:43:10 +09:00
unsigned long index;
void *client_data;
int ret;
down_write(&devices_rwsem);
if (!strcmp(name, dev_name(&ibdev->dev))) {
RDMA/srp: Rename SRP sysfs name after IB device rename trigger SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-17 21:43:10 +09:00
up_write(&devices_rwsem);
return 0;
}
if (__ib_device_get_by_name(name)) {
RDMA/srp: Rename SRP sysfs name after IB device rename trigger SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-17 21:43:10 +09:00
up_write(&devices_rwsem);
return -EEXIST;
}
ret = device_rename(&ibdev->dev, name);
RDMA/srp: Rename SRP sysfs name after IB device rename trigger SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-17 21:43:10 +09:00
if (ret) {
up_write(&devices_rwsem);
return ret;
}
strlcpy(ibdev->name, name, IB_DEVICE_NAME_MAX);
ret = rename_compat_devs(ibdev);
RDMA/srp: Rename SRP sysfs name after IB device rename trigger SRP logic used device name and port index as symlink to relevant kobject. If the IB device is renamed then the prior name will be re-used by the next device plugged in and sysfs will panic as SRP will try to re-use the same name. mlx5_ib: Mellanox Connect-IB Infiniband driver v5.0-0 sysfs: cannot create duplicate filename '/class/infiniband_srp/srp-mlx5_0-1' CPU: 3 PID: 1107 Comm: modprobe Not tainted 5.1.0-for-upstream-perf-2019-05-12_15-09-52-87 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x5a/0x73 sysfs_warn_dup+0x58/0x70 sysfs_do_create_link_sd.isra.2+0xa3/0xb0 device_add+0x33f/0x660 srp_add_one+0x301/0x4f0 [ib_srp] add_client_context+0x99/0xe0 [ib_core] enable_device_and_get+0xd1/0x1b0 [ib_core] ib_register_device+0x533/0x710 [ib_core] ? mutex_lock+0xe/0x30 __mlx5_ib_add+0x23/0x70 [mlx5_ib] mlx5_add_device+0x4e/0xd0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffa0791000 do_one_initcall+0x4b/0x1cb ? kmem_cache_alloc_trace+0xc6/0x1d0 ? do_init_module+0x22/0x21f do_init_module+0x5a/0x21f load_module+0x17f2/0x1ca0 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x48/0x120 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f157cce10d9 The module load/unload sequence was used to trigger such kernel panic: sudo modprobe ib_srp sudo modprobe -r mlx5_ib sudo modprobe -r mlx5_core sudo modprobe mlx5_core Have SRP track the name of the core device so that it can't have a name collision. Fixes: d21943dd19b5 ("RDMA/core: Implement IB device rename function") Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-17 21:43:10 +09:00
downgrade_write(&devices_rwsem);
down_read(&ibdev->client_data_rwsem);
xan_for_each_marked(&ibdev->client_data, index, client_data,
CLIENT_DATA_REGISTERED) {
struct ib_client *client = xa_load(&clients, index);
if (!client || !client->rename)
continue;
client->rename(ibdev, client_data);
}
up_read(&ibdev->client_data_rwsem);
up_read(&devices_rwsem);
return 0;
}
static int alloc_name(struct ib_device *ibdev, const char *name)
{
struct ib_device *device;
unsigned long index;
struct ida inuse;
int rc;
int i;
lockdep_assert_held_write(&devices_rwsem);
ida_init(&inuse);
xa_for_each (&devices, index, device) {
char buf[IB_DEVICE_NAME_MAX];
if (sscanf(dev_name(&device->dev), name, &i) != 1)
continue;
if (i < 0 || i >= INT_MAX)
continue;
snprintf(buf, sizeof buf, name, i);
if (strcmp(buf, dev_name(&device->dev)) != 0)
continue;
rc = ida_alloc_range(&inuse, i, i, GFP_KERNEL);
if (rc < 0)
goto out;
}
rc = ida_alloc(&inuse, GFP_KERNEL);
if (rc < 0)
goto out;
rc = dev_set_name(&ibdev->dev, name, rc);
out:
ida_destroy(&inuse);
return rc;
}
static void ib_device_release(struct device *device)
{
struct ib_device *dev = container_of(device, struct ib_device, dev);
free_netdevs(dev);
WARN_ON(refcount_read(&dev->refcount));
RDMA/core: Fix panic when port_data isn't initialized This happens if assign_name() returns failure when called from ib_register_device(), that will lead to the following panic in every time that someone touches the port_data's data members. BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 19 PID: 1994 Comm: systemd-udevd Not tainted 5.1.0-rc5+ #1 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 12/20/2013 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Code: 85 ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 9c 58 66 66 90 66 90 48 89 c3 fa 66 66 90 66 66 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 0f 94 c2 84 d2 74 05 48 89 d8 5b c3 89 c6 e8 b4 85 8a RSP: 0018:ffffa8d7079a7c08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffffa8d7079a7bf8 RDX: 0000000000000001 RSI: ffff93607c990000 RDI: 00000000000000c0 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffc08c4dd8 R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000000c0 R13: ffff93607c990000 R14: ffffffffc05a9740 R15: ffffa8d7079a7e98 FS: 00007f1c6ee438c0(0000) GS:ffff93609f6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000819fca002 CR4: 00000000000606e0 Call Trace: free_netdevs+0x4d/0xe0 [ib_core] ib_dealloc_device+0x51/0xb0 [ib_core] __mlx5_ib_add+0x5e/0x70 [mlx5_ib] mlx5_add_device+0x57/0xe0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffc0474000 do_one_initcall+0x4e/0x1d4 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x15f/0x1c0 do_init_module+0x5a/0x218 load_module+0x186b/0x1e40 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 8ceb1357b337 ("RDMA/device: Consolidate ib_device per_port data into one place") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-23 16:12:51 +09:00
if (dev->port_data) {
ib_cache_release_one(dev);
ib_security_release_port_pkey_list(dev);
kfree_rcu(container_of(dev->port_data, struct ib_port_data_rcu,
pdata[0]),
rcu_head);
RDMA/core: Fix panic when port_data isn't initialized This happens if assign_name() returns failure when called from ib_register_device(), that will lead to the following panic in every time that someone touches the port_data's data members. BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 19 PID: 1994 Comm: systemd-udevd Not tainted 5.1.0-rc5+ #1 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 12/20/2013 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Code: 85 ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 9c 58 66 66 90 66 90 48 89 c3 fa 66 66 90 66 66 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 0f 94 c2 84 d2 74 05 48 89 d8 5b c3 89 c6 e8 b4 85 8a RSP: 0018:ffffa8d7079a7c08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffffa8d7079a7bf8 RDX: 0000000000000001 RSI: ffff93607c990000 RDI: 00000000000000c0 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffc08c4dd8 R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000000c0 R13: ffff93607c990000 R14: ffffffffc05a9740 R15: ffffa8d7079a7e98 FS: 00007f1c6ee438c0(0000) GS:ffff93609f6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000819fca002 CR4: 00000000000606e0 Call Trace: free_netdevs+0x4d/0xe0 [ib_core] ib_dealloc_device+0x51/0xb0 [ib_core] __mlx5_ib_add+0x5e/0x70 [mlx5_ib] mlx5_add_device+0x57/0xe0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffc0474000 do_one_initcall+0x4e/0x1d4 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x15f/0x1c0 do_init_module+0x5a/0x218 load_module+0x186b/0x1e40 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 8ceb1357b337 ("RDMA/device: Consolidate ib_device per_port data into one place") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-23 16:12:51 +09:00
}
xa_destroy(&dev->compat_devs);
xa_destroy(&dev->client_data);
kfree_rcu(dev, rcu_head);
}
static int ib_device_uevent(struct device *device,
struct kobj_uevent_env *env)
{
if (add_uevent_var(env, "NAME=%s", dev_name(device)))
return -ENOMEM;
/*
* It would be nice to pass the node GUID with the event...
*/
return 0;
}
static const void *net_namespace(struct device *d)
{
struct ib_core_device *coredev =
container_of(d, struct ib_core_device, dev);
return read_pnet(&coredev->rdma_net);
}
static struct class ib_class = {
.name = "infiniband",
.dev_release = ib_device_release,
.dev_uevent = ib_device_uevent,
.ns_type = &net_ns_type_operations,
.namespace = net_namespace,
};
static void rdma_init_coredev(struct ib_core_device *coredev,
struct ib_device *dev, struct net *net)
{
/* This BUILD_BUG_ON is intended to catch layout change
* of union of ib_core_device and device.
* dev must be the first element as ib_core and providers
* driver uses it. Adding anything in ib_core_device before
* device will break this assumption.
*/
BUILD_BUG_ON(offsetof(struct ib_device, coredev.dev) !=
offsetof(struct ib_device, dev));
coredev->dev.class = &ib_class;
coredev->dev.groups = dev->groups;
device_initialize(&coredev->dev);
coredev->owner = dev;
INIT_LIST_HEAD(&coredev->port_list);
write_pnet(&coredev->rdma_net, net);
}
/**
* _ib_alloc_device - allocate an IB device struct
* @size:size of structure to allocate
*
* Low-level drivers should use ib_alloc_device() to allocate &struct
* ib_device. @size is the size of the structure to be allocated,
* including any private data used by the low-level driver.
* ib_dealloc_device() must be used to free structures allocated with
* ib_alloc_device().
*/
struct ib_device *_ib_alloc_device(size_t size)
{
struct ib_device *device;
if (WARN_ON(size < sizeof(struct ib_device)))
return NULL;
device = kzalloc(size, GFP_KERNEL);
if (!device)
return NULL;
if (rdma_restrack_init(device)) {
kfree(device);
return NULL;
}
device->groups[0] = &ib_dev_attr_group;
rdma_init_coredev(&device->coredev, device, &init_net);
INIT_LIST_HEAD(&device->event_handler_list);
spin_lock_init(&device->event_handler_lock);
mutex_init(&device->unregistration_lock);
/*
* client_data needs to be alloc because we don't want our mark to be
* destroyed if the user stores NULL in the client data.
*/
xa_init_flags(&device->client_data, XA_FLAGS_ALLOC);
init_rwsem(&device->client_data_rwsem);
xa_init_flags(&device->compat_devs, XA_FLAGS_ALLOC);
mutex_init(&device->compat_devs_mutex);
RDMA/core: Sync unregistration with netlink commands When the rdma device is getting removed, get resource info can race with device removal, as below: CPU-0 CPU-1 -------- -------- rdma_nl_rcv_msg() nldev_res_get_cq_dumpit() mutex_lock(device_lock); get device reference mutex_unlock(device_lock); [..] ib_unregister_device() /* Valid reference to * device->dev exists. */ ib_dealloc_device() [..] provider->fill_res_entry(); Even though device object is not freed, fill_res_entry() can get called on device which doesn't have a driver anymore. Kernel core device reference count is not sufficient, as this only keeps the structure valid, and doesn't guarantee the driver is still loaded. Similar race can occur with device renaming and device removal, where device_rename() tries to rename a unregistered device. While this is fine for devices of a class which are not net namespace aware, but it is incorrect for net namespace aware class coming in subsequent series. If a class is net namespace aware, then the below [1] call trace is observed in above situation. Therefore, to avoid the race, keep a reference count and let device unregistration wait until all netlink users drop the reference. [1] Call trace: kernfs: ns required in 'infiniband' for 'mlx5_0' WARNING: CPU: 18 PID: 44270 at fs/kernfs/dir.c:842 kernfs_find_ns+0x104/0x120 libahci i2c_core mlxfw libata dca [last unloaded: devlink] RIP: 0010:kernfs_find_ns+0x104/0x120 Call Trace: kernfs_find_and_get_ns+0x2e/0x50 sysfs_rename_link_ns+0x40/0xb0 device_rename+0xb2/0xf0 ib_device_rename+0xb3/0x100 [ib_core] nldev_set_doit+0x165/0x190 [ib_core] rdma_nl_rcv_msg+0x249/0x250 [ib_core] ? netlink_deliver_tap+0x8f/0x3e0 rdma_nl_rcv+0xd6/0x120 [ib_core] netlink_unicast+0x17c/0x230 netlink_sendmsg+0x2f0/0x3e0 sock_sendmsg+0x30/0x40 __sys_sendto+0xdc/0x160 Fixes: da5c85078215 ("RDMA/nldev: add driver-specific resource tracking") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-11-16 10:50:57 +09:00
init_completion(&device->unreg_completion);
INIT_WORK(&device->unregistration_work, ib_unregister_work);
return device;
}
EXPORT_SYMBOL(_ib_alloc_device);
/**
* ib_dealloc_device - free an IB device struct
* @device:structure to free
*
* Free a structure allocated with ib_alloc_device().
*/
void ib_dealloc_device(struct ib_device *device)
{
if (device->ops.dealloc_driver)
device->ops.dealloc_driver(device);
/*
* ib_unregister_driver() requires all devices to remain in the xarray
* while their ops are callable. The last op we call is dealloc_driver
* above. This is needed to create a fence on op callbacks prior to
* allowing the driver module to unload.
*/
down_write(&devices_rwsem);
if (xa_load(&devices, device->index) == device)
xa_erase(&devices, device->index);
up_write(&devices_rwsem);
/* Expedite releasing netdev references */
free_netdevs(device);
WARN_ON(!xa_empty(&device->compat_devs));
WARN_ON(!xa_empty(&device->client_data));
WARN_ON(refcount_read(&device->refcount));
rdma_restrack_clean(device);
/* Balances with device_initialize */
put_device(&device->dev);
}
EXPORT_SYMBOL(ib_dealloc_device);
/*
* add_client_context() and remove_client_context() must be safe against
* parallel calls on the same device - registration/unregistration of both the
* device and client can be occurring in parallel.
*
* The routines need to be a fence, any caller must not return until the add
* or remove is fully completed.
*/
static int add_client_context(struct ib_device *device,
struct ib_client *client)
{
int ret = 0;
if (!device->kverbs_provider && !client->no_kverbs_req)
return 0;
down_write(&device->client_data_rwsem);
/*
* Another caller to add_client_context got here first and has already
* completely initialized context.
*/
if (xa_get_mark(&device->client_data, client->client_id,
CLIENT_DATA_REGISTERED))
goto out;
ret = xa_err(xa_store(&device->client_data, client->client_id, NULL,
GFP_KERNEL));
if (ret)
goto out;
downgrade_write(&device->client_data_rwsem);
if (client->add)
client->add(device);
/* Readers shall not see a client until add has been completed */
xa_set_mark(&device->client_data, client->client_id,
CLIENT_DATA_REGISTERED);
up_read(&device->client_data_rwsem);
return 0;
out:
up_write(&device->client_data_rwsem);
return ret;
}
static void remove_client_context(struct ib_device *device,
unsigned int client_id)
{
struct ib_client *client;
void *client_data;
down_write(&device->client_data_rwsem);
if (!xa_get_mark(&device->client_data, client_id,
CLIENT_DATA_REGISTERED)) {
up_write(&device->client_data_rwsem);
return;
}
client_data = xa_load(&device->client_data, client_id);
xa_clear_mark(&device->client_data, client_id, CLIENT_DATA_REGISTERED);
client = xa_load(&clients, client_id);
downgrade_write(&device->client_data_rwsem);
/*
* Notice we cannot be holding any exclusive locks when calling the
* remove callback as the remove callback can recurse back into any
* public functions in this module and thus try for any locks those
* functions take.
*
* For this reason clients and drivers should not call the
* unregistration functions will holdling any locks.
*
* It tempting to drop the client_data_rwsem too, but this is required
* to ensure that unregister_client does not return until all clients
* are completely unregistered, which is required to avoid module
* unloading races.
*/
if (client->remove)
client->remove(device, client_data);
xa_erase(&device->client_data, client_id);
up_read(&device->client_data_rwsem);
}
static int alloc_port_data(struct ib_device *device)
{
struct ib_port_data_rcu *pdata_rcu;
unsigned int port;
if (device->port_data)
return 0;
/* This can only be called once the physical port range is defined */
if (WARN_ON(!device->phys_port_cnt))
return -EINVAL;
/*
* device->port_data is indexed directly by the port number to make
* access to this data as efficient as possible.
*
* Therefore port_data is declared as a 1 based array with potential
* empty slots at the beginning.
*/
pdata_rcu = kzalloc(struct_size(pdata_rcu, pdata,
rdma_end_port(device) + 1),
GFP_KERNEL);
if (!pdata_rcu)
return -ENOMEM;
/*
* The rcu_head is put in front of the port data array and the stored
* pointer is adjusted since we never need to see that member until
* kfree_rcu.
*/
device->port_data = pdata_rcu->pdata;
rdma_for_each_port (device, port) {
struct ib_port_data *pdata = &device->port_data[port];
pdata->ib_dev = device;
spin_lock_init(&pdata->pkey_list_lock);
INIT_LIST_HEAD(&pdata->pkey_list);
spin_lock_init(&pdata->netdev_lock);
INIT_HLIST_NODE(&pdata->ndev_hash_link);
}
return 0;
}
static int verify_immutable(const struct ib_device *dev, u8 port)
{
return WARN_ON(!rdma_cap_ib_mad(dev, port) &&
rdma_max_mad_size(dev, port) != 0);
}
static int setup_port_data(struct ib_device *device)
{
unsigned int port;
int ret;
ret = alloc_port_data(device);
if (ret)
return ret;
rdma_for_each_port (device, port) {
struct ib_port_data *pdata = &device->port_data[port];
ret = device->ops.get_port_immutable(device, port,
&pdata->immutable);
if (ret)
return ret;
if (verify_immutable(device, port))
return -EINVAL;
}
return 0;
}
void ib_get_device_fw_str(struct ib_device *dev, char *str)
{
if (dev->ops.get_dev_fw_str)
dev->ops.get_dev_fw_str(dev, str);
else
str[0] = '\0';
}
EXPORT_SYMBOL(ib_get_device_fw_str);
static void ib_policy_change_task(struct work_struct *work)
{
struct ib_device *dev;
unsigned long index;
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
unsigned int i;
rdma_for_each_port (dev, i) {
u64 sp;
int ret = ib_get_cached_subnet_prefix(dev,
i,
&sp);
WARN_ONCE(ret,
"ib_get_cached_subnet_prefix err: %d, this should never happen here\n",
ret);
if (!ret)
ib_security_cache_change(dev, i, sp);
}
}
up_read(&devices_rwsem);
}
static int ib_security_change(struct notifier_block *nb, unsigned long event,
void *lsm_data)
{
if (event != LSM_POLICY_CHANGE)
return NOTIFY_DONE;
schedule_work(&ib_policy_change_work);
ib_mad_agent_security_change();
return NOTIFY_OK;
}
static void compatdev_release(struct device *dev)
{
struct ib_core_device *cdev =
container_of(dev, struct ib_core_device, dev);
kfree(cdev);
}
static int add_one_compat_dev(struct ib_device *device,
struct rdma_dev_net *rnet)
{
struct ib_core_device *cdev;
int ret;
lockdep_assert_held(&rdma_nets_rwsem);
if (!ib_devices_shared_netns)
return 0;
/*
* Create and add compat device in all namespaces other than where it
* is currently bound to.
*/
if (net_eq(read_pnet(&rnet->net),
read_pnet(&device->coredev.rdma_net)))
return 0;
/*
* The first of init_net() or ib_register_device() to take the
* compat_devs_mutex wins and gets to add the device. Others will wait
* for completion here.
*/
mutex_lock(&device->compat_devs_mutex);
cdev = xa_load(&device->compat_devs, rnet->id);
if (cdev) {
ret = 0;
goto done;
}
ret = xa_reserve(&device->compat_devs, rnet->id, GFP_KERNEL);
if (ret)
goto done;
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
if (!cdev) {
ret = -ENOMEM;
goto cdev_err;
}
cdev->dev.parent = device->dev.parent;
rdma_init_coredev(cdev, device, read_pnet(&rnet->net));
cdev->dev.release = compatdev_release;
dev_set_name(&cdev->dev, "%s", dev_name(&device->dev));
ret = device_add(&cdev->dev);
if (ret)
goto add_err;
ret = ib_setup_port_attrs(cdev);
if (ret)
goto port_err;
ret = xa_err(xa_store(&device->compat_devs, rnet->id,
cdev, GFP_KERNEL));
if (ret)
goto insert_err;
mutex_unlock(&device->compat_devs_mutex);
return 0;
insert_err:
ib_free_port_attrs(cdev);
port_err:
device_del(&cdev->dev);
add_err:
put_device(&cdev->dev);
cdev_err:
xa_release(&device->compat_devs, rnet->id);
done:
mutex_unlock(&device->compat_devs_mutex);
return ret;
}
static void remove_one_compat_dev(struct ib_device *device, u32 id)
{
struct ib_core_device *cdev;
mutex_lock(&device->compat_devs_mutex);
cdev = xa_erase(&device->compat_devs, id);
mutex_unlock(&device->compat_devs_mutex);
if (cdev) {
ib_free_port_attrs(cdev);
device_del(&cdev->dev);
put_device(&cdev->dev);
}
}
static void remove_compat_devs(struct ib_device *device)
{
struct ib_core_device *cdev;
unsigned long index;
xa_for_each (&device->compat_devs, index, cdev)
remove_one_compat_dev(device, index);
}
static int add_compat_devs(struct ib_device *device)
{
struct rdma_dev_net *rnet;
unsigned long index;
int ret = 0;
lockdep_assert_held(&devices_rwsem);
down_read(&rdma_nets_rwsem);
xa_for_each (&rdma_nets, index, rnet) {
ret = add_one_compat_dev(device, rnet);
if (ret)
break;
}
up_read(&rdma_nets_rwsem);
return ret;
}
static void remove_all_compat_devs(void)
{
struct ib_compat_device *cdev;
struct ib_device *dev;
unsigned long index;
down_read(&devices_rwsem);
xa_for_each (&devices, index, dev) {
unsigned long c_index = 0;
/* Hold nets_rwsem so that any other thread modifying this
* system param can sync with this thread.
*/
down_read(&rdma_nets_rwsem);
xa_for_each (&dev->compat_devs, c_index, cdev)
remove_one_compat_dev(dev, c_index);
up_read(&rdma_nets_rwsem);
}
up_read(&devices_rwsem);
}
static int add_all_compat_devs(void)
{
struct rdma_dev_net *rnet;
struct ib_device *dev;
unsigned long index;
int ret = 0;
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
unsigned long net_index = 0;
/* Hold nets_rwsem so that any other thread modifying this
* system param can sync with this thread.
*/
down_read(&rdma_nets_rwsem);
xa_for_each (&rdma_nets, net_index, rnet) {
ret = add_one_compat_dev(dev, rnet);
if (ret)
break;
}
up_read(&rdma_nets_rwsem);
}
up_read(&devices_rwsem);
if (ret)
remove_all_compat_devs();
return ret;
}
int rdma_compatdev_set(u8 enable)
{
struct rdma_dev_net *rnet;
unsigned long index;
int ret = 0;
down_write(&rdma_nets_rwsem);
if (ib_devices_shared_netns == enable) {
up_write(&rdma_nets_rwsem);
return 0;
}
/* enable/disable of compat devices is not supported
* when more than default init_net exists.
*/
xa_for_each (&rdma_nets, index, rnet) {
ret++;
break;
}
if (!ret)
ib_devices_shared_netns = enable;
up_write(&rdma_nets_rwsem);
if (ret)
return -EBUSY;
if (enable)
ret = add_all_compat_devs();
else
remove_all_compat_devs();
return ret;
}
static void rdma_dev_exit_net(struct net *net)
{
struct rdma_dev_net *rnet = net_generic(net, rdma_dev_net_id);
struct ib_device *dev;
unsigned long index;
int ret;
down_write(&rdma_nets_rwsem);
/*
* Prevent the ID from being re-used and hide the id from xa_for_each.
*/
ret = xa_err(xa_store(&rdma_nets, rnet->id, NULL, GFP_KERNEL));
WARN_ON(ret);
up_write(&rdma_nets_rwsem);
down_read(&devices_rwsem);
xa_for_each (&devices, index, dev) {
get_device(&dev->dev);
/*
* Release the devices_rwsem so that pontentially blocking
* device_del, doesn't hold the devices_rwsem for too long.
*/
up_read(&devices_rwsem);
remove_one_compat_dev(dev, rnet->id);
/*
* If the real device is in the NS then move it back to init.
*/
rdma_dev_change_netns(dev, net, &init_net);
put_device(&dev->dev);
down_read(&devices_rwsem);
}
up_read(&devices_rwsem);
xa_erase(&rdma_nets, rnet->id);
}
static __net_init int rdma_dev_init_net(struct net *net)
{
struct rdma_dev_net *rnet = net_generic(net, rdma_dev_net_id);
unsigned long index;
struct ib_device *dev;
int ret;
/* No need to create any compat devices in default init_net. */
if (net_eq(net, &init_net))
return 0;
write_pnet(&rnet->net, net);
ret = xa_alloc(&rdma_nets, &rnet->id, rnet, xa_limit_32b, GFP_KERNEL);
if (ret)
return ret;
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
/* Hold nets_rwsem so that netlink command cannot change
* system configuration for device sharing mode.
*/
down_read(&rdma_nets_rwsem);
ret = add_one_compat_dev(dev, rnet);
up_read(&rdma_nets_rwsem);
if (ret)
break;
}
up_read(&devices_rwsem);
if (ret)
rdma_dev_exit_net(net);
return ret;
}
/*
* Assign the unique string device name and the unique device index. This is
* undone by ib_dealloc_device.
*/
static int assign_name(struct ib_device *device, const char *name)
{
static u32 last_id;
int ret;
down_write(&devices_rwsem);
/* Assign a unique name to the device */
if (strchr(name, '%'))
ret = alloc_name(device, name);
else
ret = dev_set_name(&device->dev, name);
if (ret)
goto out;
if (__ib_device_get_by_name(dev_name(&device->dev))) {
ret = -ENFILE;
goto out;
}
strlcpy(device->name, dev_name(&device->dev), IB_DEVICE_NAME_MAX);
XArray updates for 5.1-rc1 -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+ w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg== =HSP/ -----END PGP SIGNATURE----- Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-12 12:06:18 +09:00
ret = xa_alloc_cyclic(&devices, &device->index, device, xa_limit_31b,
&last_id, GFP_KERNEL);
if (ret > 0)
ret = 0;
out:
up_write(&devices_rwsem);
return ret;
}
static void setup_dma_device(struct ib_device *device)
{
struct device *parent = device->dev.parent;
WARN_ON_ONCE(device->dma_device);
if (device->dev.dma_ops) {
/*
* The caller provided custom DMA operations. Copy the
* DMA-related fields that are used by e.g. dma_alloc_coherent()
* into device->dev.
*/
device->dma_device = &device->dev;
IB/core: Fix two kernel warnings triggered by rxe registration Eliminate the WARN_ONs that create following two warnings when registering an rxe device: WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_register_device+0x591/0x640 [ib_core] Call Trace: rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] Call Trace: ib_register_device+0x3f7/0x640 [ib_core] rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a The code should accept either a parent pointer or a fully specified DMA specification without producing warnings. Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-04 06:28:18 +09:00
if (!device->dev.dma_mask) {
if (parent)
device->dev.dma_mask = parent->dma_mask;
else
WARN_ON_ONCE(true);
}
if (!device->dev.coherent_dma_mask) {
if (parent)
device->dev.coherent_dma_mask =
parent->coherent_dma_mask;
else
WARN_ON_ONCE(true);
}
} else {
/*
* The caller did not provide custom DMA operations. Use the
* DMA mapping operations of the parent device.
*/
IB/core: Fix two kernel warnings triggered by rxe registration Eliminate the WARN_ONs that create following two warnings when registering an rxe device: WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/device.c:449 ib_register_device+0x591/0x640 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Not tainted 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_register_device+0x591/0x640 [ib_core] Call Trace: rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a WARNING: CPU: 2 PID: 1005 at drivers/infiniband/core/sysfs.c:1279 ib_device_register_sysfs+0x11d/0x160 [ib_core] CPU: 2 PID: 1005 Comm: run_tests Tainted: G W 4.15.0-rc4-dbg+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:ib_device_register_sysfs+0x11d/0x160 [ib_core] Call Trace: ib_register_device+0x3f7/0x640 [ib_core] rxe_register_device+0x3c6/0x470 [rdma_rxe] rxe_add+0x543/0x5e0 [rdma_rxe] rxe_net_add+0x37/0xb0 [rdma_rxe] rxe_param_set_add+0x5a/0x120 [rdma_rxe] param_attr_store+0x5e/0xc0 module_attr_store+0x19/0x30 sysfs_kf_write+0x3d/0x50 kernfs_fop_write+0x116/0x1a0 __vfs_write+0x23/0x120 vfs_write+0xbe/0x1b0 SyS_write+0x44/0xa0 entry_SYSCALL_64_fastpath+0x23/0x9a The code should accept either a parent pointer or a fully specified DMA specification without producing warnings. Fixes: 99db9494035f ("IB/core: Remove ib_device.dma_device") Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: stable@vger.kernel.org # v4.11 Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-01-04 06:28:18 +09:00
WARN_ON_ONCE(!parent);
device->dma_device = parent;
}
/* Setup default max segment size for all IB devices */
dma_set_max_seg_size(device->dma_device, SZ_2G);
}
/*
* setup_device() allocates memory and sets up data that requires calling the
* device ops, this is the only reason these actions are not done during
* ib_alloc_device. It is undone by ib_dealloc_device().
*/
static int setup_device(struct ib_device *device)
{
struct ib_udata uhw = {.outlen = 0, .inlen = 0};
int ret;
setup_dma_device(device);
ret = ib_device_check_mandatory(device);
if (ret)
return ret;
ret = setup_port_data(device);
if (ret) {
dev_warn(&device->dev, "Couldn't create per-port data\n");
return ret;
}
memset(&device->attrs, 0, sizeof(device->attrs));
ret = device->ops.query_device(device, &device->attrs, &uhw);
if (ret) {
dev_warn(&device->dev,
"Couldn't query the device attributes\n");
return ret;
}
return 0;
}
static void disable_device(struct ib_device *device)
{
struct ib_client *client;
WARN_ON(!refcount_read(&device->refcount));
down_write(&devices_rwsem);
xa_clear_mark(&devices, device->index, DEVICE_REGISTERED);
up_write(&devices_rwsem);
down_read(&clients_rwsem);
list_for_each_entry_reverse(client, &client_list, list)
remove_client_context(device, client->client_id);
up_read(&clients_rwsem);
/* Pairs with refcount_set in enable_device */
ib_device_put(device);
wait_for_completion(&device->unreg_completion);
/*
* compat devices must be removed after device refcount drops to zero.
* Otherwise init_net() may add more compatdevs after removing compat
* devices and before device is disabled.
*/
remove_compat_devs(device);
}
/*
* An enabled device is visible to all clients and to all the public facing
* APIs that return a device pointer. This always returns with a new get, even
* if it fails.
*/
static int enable_device_and_get(struct ib_device *device)
{
struct ib_client *client;
unsigned long index;
int ret = 0;
/*
* One ref belongs to the xa and the other belongs to this
* thread. This is needed to guard against parallel unregistration.
*/
refcount_set(&device->refcount, 2);
down_write(&devices_rwsem);
xa_set_mark(&devices, device->index, DEVICE_REGISTERED);
/*
* By using downgrade_write() we ensure that no other thread can clear
* DEVICE_REGISTERED while we are completing the client setup.
*/
downgrade_write(&devices_rwsem);
if (device->ops.enable_driver) {
ret = device->ops.enable_driver(device);
if (ret)
goto out;
}
down_read(&clients_rwsem);
xa_for_each_marked (&clients, index, client, CLIENT_REGISTERED) {
ret = add_client_context(device, client);
if (ret)
break;
}
up_read(&clients_rwsem);
if (!ret)
ret = add_compat_devs(device);
out:
up_read(&devices_rwsem);
return ret;
}
/**
* ib_register_device - Register an IB device with IB core
* @device:Device to register
*
* Low-level drivers use ib_register_device() to register their
* devices with the IB core. All registered clients will receive a
* callback for each device that is added. @device must be allocated
* with ib_alloc_device().
*
* If the driver uses ops.dealloc_driver and calls any ib_unregister_device()
* asynchronously then the device pointer may become freed as soon as this
* function returns.
*/
int ib_register_device(struct ib_device *device, const char *name)
{
int ret;
ret = assign_name(device, name);
if (ret)
return ret;
ret = setup_device(device);
if (ret)
return ret;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
ret = ib_cache_setup_one(device);
if (ret) {
dev_warn(&device->dev,
"Couldn't set up InfiniBand P_Key/GID cache\n");
return ret;
}
ib_device_register_rdmacg(device);
/*
* Ensure that ADD uevent is not fired because it
* is too early amd device is not initialized yet.
*/
dev_set_uevent_suppress(&device->dev, true);
ret = device_add(&device->dev);
if (ret)
goto cg_cleanup;
ret = ib_device_register_sysfs(device);
if (ret) {
dev_warn(&device->dev,
"Couldn't register device with driver model\n");
goto dev_cleanup;
}
ret = enable_device_and_get(device);
dev_set_uevent_suppress(&device->dev, false);
/* Mark for userspace that device is ready */
kobject_uevent(&device->dev.kobj, KOBJ_ADD);
if (ret) {
void (*dealloc_fn)(struct ib_device *);
/*
* If we hit this error flow then we don't want to
* automatically dealloc the device since the caller is
* expected to call ib_dealloc_device() after
* ib_register_device() fails. This is tricky due to the
* possibility for a parallel unregistration along with this
* error flow. Since we have a refcount here we know any
* parallel flow is stopped in disable_device and will see the
* NULL pointers, causing the responsibility to
* ib_dealloc_device() to revert back to this thread.
*/
dealloc_fn = device->ops.dealloc_driver;
device->ops.dealloc_driver = NULL;
ib_device_put(device);
__ib_unregister_device(device);
device->ops.dealloc_driver = dealloc_fn;
return ret;
}
ib_device_put(device);
IB/core: Fix kernel crash during fail to initialize device This patch fixes the kernel crash that occurs during ib_dealloc_device() called due to provider driver fails with an error after ib_alloc_device() and before it can register using ib_register_device(). This crashed seen in tha lab as below which can occur with any IB device which fails to perform its device initialization before invoking ib_register_device(). This patch avoids touching cache and port immutable structures if device is not yet initialized. It also releases related memory when cache and port immutable data structure initialization fails during register_device() state. [81416.561946] BUG: unable to handle kernel NULL pointer dereference at (null) [81416.570340] IP: ib_cache_release_one+0x29/0x80 [ib_core] [81416.576222] PGD 78da66067 [81416.576223] PUD 7f2d7c067 [81416.579484] PMD 0 [81416.582720] [81416.587242] Oops: 0000 [#1] SMP [81416.722395] task: ffff8807887515c0 task.stack: ffffc900062c0000 [81416.729148] RIP: 0010:ib_cache_release_one+0x29/0x80 [ib_core] [81416.735793] RSP: 0018:ffffc900062c3a90 EFLAGS: 00010202 [81416.741823] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 [81416.749785] RDX: 0000000000000000 RSI: 0000000000000282 RDI: ffff880859fec000 [81416.757757] RBP: ffffc900062c3aa0 R08: ffff8808536e5ac0 R09: ffff880859fec5b0 [81416.765708] R10: 00000000536e5c01 R11: ffff8808536e5ac0 R12: ffff880859fec000 [81416.773672] R13: 0000000000000000 R14: ffff8808536e5ac0 R15: ffff88084ebc0060 [81416.781621] FS: 00007fd879fab740(0000) GS:ffff88085fac0000(0000) knlGS:0000000000000000 [81416.790522] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [81416.797094] CR2: 0000000000000000 CR3: 00000007eb215000 CR4: 00000000003406e0 [81416.805051] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [81416.812997] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [81416.820950] Call Trace: [81416.824226] ib_device_release+0x1e/0x40 [ib_core] [81416.829858] device_release+0x32/0xa0 [81416.834370] kobject_cleanup+0x63/0x170 [81416.839058] kobject_put+0x25/0x50 [81416.843319] ib_dealloc_device+0x25/0x40 [ib_core] [81416.848986] mlx5_ib_add+0x163/0x1990 [mlx5_ib] [81416.854414] mlx5_add_device+0x5a/0x160 [mlx5_core] [81416.860191] mlx5_register_interface+0x8d/0xc0 [mlx5_core] [81416.866587] ? 0xffffffffa09e9000 [81416.870816] mlx5_ib_init+0x15/0x17 [mlx5_ib] [81416.876094] do_one_initcall+0x51/0x1b0 [81416.880861] ? __vunmap+0x85/0xd0 [81416.885113] ? kmem_cache_alloc_trace+0x14b/0x1b0 [81416.890768] ? vfree+0x2e/0x70 [81416.894762] do_init_module+0x60/0x1fa [81416.899441] load_module+0x15f6/0x1af0 [81416.904114] ? __symbol_put+0x60/0x60 [81416.908709] ? ima_post_read_file+0x3d/0x80 [81416.913828] ? security_kernel_post_read_file+0x6b/0x80 [81416.920006] SYSC_finit_module+0xa6/0xf0 [81416.924888] SyS_finit_module+0xe/0x10 [81416.929568] entry_SYSCALL_64_fastpath+0x1a/0xa9 [81416.935089] RIP: 0033:0x7fd879494949 [81416.939543] RSP: 002b:00007ffdbc1b4e58 EFLAGS: 00000202 ORIG_RAX: 0000000000000139 [81416.947982] RAX: ffffffffffffffda RBX: 0000000001b66f00 RCX: 00007fd879494949 [81416.955965] RDX: 0000000000000000 RSI: 000000000041a13c RDI: 0000000000000003 [81416.963926] RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000001b652a0 [81416.971861] R10: 0000000000000003 R11: 0000000000000202 R12: 00007ffdbc1b3e70 [81416.979763] R13: 00007ffdbc1b3e50 R14: 0000000000000005 R15: 0000000000000000 [81417.008005] RIP: ib_cache_release_one+0x29/0x80 [ib_core] RSP: ffffc900062c3a90 [81417.016045] CR2: 0000000000000000 Fixes: 55aeed0654 ("IB/core: Make ib_alloc_device init the kobject") Fixes: 7738613e7c ("IB/core: Add per port immutable struct to ib_device") Cc: <stable@vger.kernel.org> # v4.2+ Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-03-19 17:55:55 +09:00
return 0;
dev_cleanup:
device_del(&device->dev);
cg_cleanup:
dev_set_uevent_suppress(&device->dev, false);
ib_device_unregister_rdmacg(device);
ib_cache_cleanup_one(device);
return ret;
}
EXPORT_SYMBOL(ib_register_device);
/* Callers must hold a get on the device. */
static void __ib_unregister_device(struct ib_device *ib_dev)
{
/*
* We have a registration lock so that all the calls to unregister are
* fully fenced, once any unregister returns the device is truely
* unregistered even if multiple callers are unregistering it at the
* same time. This also interacts with the registration flow and
* provides sane semantics if register and unregister are racing.
*/
mutex_lock(&ib_dev->unregistration_lock);
if (!refcount_read(&ib_dev->refcount))
goto out;
disable_device(ib_dev);
/* Expedite removing unregistered pointers from the hash table */
free_netdevs(ib_dev);
ib_device_unregister_sysfs(ib_dev);
device_del(&ib_dev->dev);
ib_device_unregister_rdmacg(ib_dev);
ib_cache_cleanup_one(ib_dev);
/*
* Drivers using the new flow may not call ib_dealloc_device except
* in error unwind prior to registration success.
*/
if (ib_dev->ops.dealloc_driver) {
WARN_ON(kref_read(&ib_dev->dev.kobj.kref) <= 1);
ib_dealloc_device(ib_dev);
}
out:
mutex_unlock(&ib_dev->unregistration_lock);
}
/**
* ib_unregister_device - Unregister an IB device
* @device: The device to unregister
*
* Unregister an IB device. All clients will receive a remove callback.
*
* Callers should call this routine only once, and protect against races with
* registration. Typically it should only be called as part of a remove
* callback in an implementation of driver core's struct device_driver and
* related.
*
* If ops.dealloc_driver is used then ib_dev will be freed upon return from
* this function.
*/
void ib_unregister_device(struct ib_device *ib_dev)
{
get_device(&ib_dev->dev);
__ib_unregister_device(ib_dev);
put_device(&ib_dev->dev);
}
EXPORT_SYMBOL(ib_unregister_device);
/**
* ib_unregister_device_and_put - Unregister a device while holding a 'get'
* device: The device to unregister
*
* This is the same as ib_unregister_device(), except it includes an internal
* ib_device_put() that should match a 'get' obtained by the caller.
*
* It is safe to call this routine concurrently from multiple threads while
* holding the 'get'. When the function returns the device is fully
* unregistered.
*
* Drivers using this flow MUST use the driver_unregister callback to clean up
* their resources associated with the device and dealloc it.
*/
void ib_unregister_device_and_put(struct ib_device *ib_dev)
{
WARN_ON(!ib_dev->ops.dealloc_driver);
get_device(&ib_dev->dev);
ib_device_put(ib_dev);
__ib_unregister_device(ib_dev);
put_device(&ib_dev->dev);
}
EXPORT_SYMBOL(ib_unregister_device_and_put);
/**
* ib_unregister_driver - Unregister all IB devices for a driver
* @driver_id: The driver to unregister
*
* This implements a fence for device unregistration. It only returns once all
* devices associated with the driver_id have fully completed their
* unregistration and returned from ib_unregister_device*().
*
* If device's are not yet unregistered it goes ahead and starts unregistering
* them.
*
* This does not block creation of new devices with the given driver_id, that
* is the responsibility of the caller.
*/
void ib_unregister_driver(enum rdma_driver_id driver_id)
{
struct ib_device *ib_dev;
unsigned long index;
down_read(&devices_rwsem);
xa_for_each (&devices, index, ib_dev) {
if (ib_dev->driver_id != driver_id)
continue;
get_device(&ib_dev->dev);
up_read(&devices_rwsem);
WARN_ON(!ib_dev->ops.dealloc_driver);
__ib_unregister_device(ib_dev);
put_device(&ib_dev->dev);
down_read(&devices_rwsem);
}
up_read(&devices_rwsem);
}
EXPORT_SYMBOL(ib_unregister_driver);
static void ib_unregister_work(struct work_struct *work)
{
struct ib_device *ib_dev =
container_of(work, struct ib_device, unregistration_work);
__ib_unregister_device(ib_dev);
put_device(&ib_dev->dev);
}
/**
* ib_unregister_device_queued - Unregister a device using a work queue
* device: The device to unregister
*
* This schedules an asynchronous unregistration using a WQ for the device. A
* driver should use this to avoid holding locks while doing unregistration,
* such as holding the RTNL lock.
*
* Drivers using this API must use ib_unregister_driver before module unload
* to ensure that all scheduled unregistrations have completed.
*/
void ib_unregister_device_queued(struct ib_device *ib_dev)
{
WARN_ON(!refcount_read(&ib_dev->refcount));
WARN_ON(!ib_dev->ops.dealloc_driver);
get_device(&ib_dev->dev);
if (!queue_work(system_unbound_wq, &ib_dev->unregistration_work))
put_device(&ib_dev->dev);
}
EXPORT_SYMBOL(ib_unregister_device_queued);
/*
* The caller must pass in a device that has the kref held and the refcount
* released. If the device is in cur_net and still registered then it is moved
* into net.
*/
static int rdma_dev_change_netns(struct ib_device *device, struct net *cur_net,
struct net *net)
{
int ret2 = -EINVAL;
int ret;
mutex_lock(&device->unregistration_lock);
/*
* If a device not under ib_device_get() or if the unregistration_lock
* is not held, the namespace can be changed, or it can be unregistered.
* Check again under the lock.
*/
if (refcount_read(&device->refcount) == 0 ||
!net_eq(cur_net, read_pnet(&device->coredev.rdma_net))) {
ret = -ENODEV;
goto out;
}
kobject_uevent(&device->dev.kobj, KOBJ_REMOVE);
disable_device(device);
/*
* At this point no one can be using the device, so it is safe to
* change the namespace.
*/
write_pnet(&device->coredev.rdma_net, net);
down_read(&devices_rwsem);
/*
* Currently rdma devices are system wide unique. So the device name
* is guaranteed free in the new namespace. Publish the new namespace
* at the sysfs level.
*/
ret = device_rename(&device->dev, dev_name(&device->dev));
up_read(&devices_rwsem);
if (ret) {
dev_warn(&device->dev,
"%s: Couldn't rename device after namespace change\n",
__func__);
/* Try and put things back and re-enable the device */
write_pnet(&device->coredev.rdma_net, cur_net);
}
ret2 = enable_device_and_get(device);
if (ret2) {
/*
* This shouldn't really happen, but if it does, let the user
* retry at later point. So don't disable the device.
*/
dev_warn(&device->dev,
"%s: Couldn't re-enable device after namespace change\n",
__func__);
}
kobject_uevent(&device->dev.kobj, KOBJ_ADD);
ib_device_put(device);
out:
mutex_unlock(&device->unregistration_lock);
if (ret)
return ret;
return ret2;
}
int ib_device_set_netns_put(struct sk_buff *skb,
struct ib_device *dev, u32 ns_fd)
{
struct net *net;
int ret;
net = get_net_ns_by_fd(ns_fd);
if (IS_ERR(net)) {
ret = PTR_ERR(net);
goto net_err;
}
if (!netlink_ns_capable(skb, net->user_ns, CAP_NET_ADMIN)) {
ret = -EPERM;
goto ns_err;
}
/*
* Currently supported only for those providers which support
* disassociation and don't do port specific sysfs init. Once a
* port_cleanup infrastructure is implemented, this limitation will be
* removed.
*/
if (!dev->ops.disassociate_ucontext || dev->ops.init_port ||
ib_devices_shared_netns) {
ret = -EOPNOTSUPP;
goto ns_err;
}
get_device(&dev->dev);
ib_device_put(dev);
ret = rdma_dev_change_netns(dev, current->nsproxy->net_ns, net);
put_device(&dev->dev);
put_net(net);
return ret;
ns_err:
put_net(net);
net_err:
ib_device_put(dev);
return ret;
}
static struct pernet_operations rdma_dev_net_ops = {
.init = rdma_dev_init_net,
.exit = rdma_dev_exit_net,
.id = &rdma_dev_net_id,
.size = sizeof(struct rdma_dev_net),
};
static int assign_client_id(struct ib_client *client)
{
int ret;
down_write(&clients_rwsem);
/*
* The add/remove callbacks must be called in FIFO/LIFO order. To
* achieve this we assign client_ids so they are sorted in
* registration order, and retain a linked list we can reverse iterate
* to get the LIFO order. The extra linked list can go away if xarray
* learns to reverse iterate.
*/
XArray updates for 5.1-rc1 -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+ w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg== =HSP/ -----END PGP SIGNATURE----- Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-12 12:06:18 +09:00
if (list_empty(&client_list)) {
client->client_id = 0;
XArray updates for 5.1-rc1 -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+ w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg== =HSP/ -----END PGP SIGNATURE----- Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-12 12:06:18 +09:00
} else {
struct ib_client *last;
last = list_last_entry(&client_list, struct ib_client, list);
client->client_id = last->client_id + 1;
}
XArray updates for 5.1-rc1 -----BEGIN PGP SIGNATURE----- iQFIBAABCgAyFiEEejHryeLBw/spnjHrDpNsjXcpgj4FAlyHF2oUHHdpbGx5QGlu ZnJhZGVhZC5vcmcACgkQDpNsjXcpgj5j9AgAlpeptRfnPO0+VXj+EbxaOOI8tOG+ w+vBasWoQB+lZ9ctf1qUQVSeLn0ErxTM7BaIP7plfDrEWiIbRWkV18B+heS5d1Yz aTV1d/8tG6/eo61K2VqXHbUhymgMtbXDsg1rwWTF8+Q4xIcMqfYAR0f9ptU1Oejc pNAn16dYgKi6+4eluY7gXxruBosQ6yNml6iEje9A3uR8nhzTI/P3Yf2GGIZnQLsL +UIx4Ps38dJ3VCYBPfbnszZfYPpILUH9/Bdx+mAMUtZwvpM3JYqc8XsiFfqDO7n1 3003yUytnRkb1UK3QIvkbPt0G8UOI4s9fxRPsA8lLSww/f2y1r5kC4Mxbg== =HSP/ -----END PGP SIGNATURE----- Merge tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax Pull XArray updates from Matthew Wilcox: "This pull request changes the xa_alloc() API. I'm only aware of one subsystem that has started trying to use it, and we agree on the fixup as part of the merge. The xa_insert() error code also changed to match xa_alloc() (EEXIST to EBUSY), and I added xa_alloc_cyclic(). Beyond that, the usual bugfixes, optimisations and tweaking. I now have a git tree with all users of the radix tree and IDR converted over to the XArray that I'll be feeding to maintainers over the next few weeks" * tag 'xarray-5.1-rc1' of git://git.infradead.org/users/willy/linux-dax: XArray: Fix xa_reserve for 2-byte aligned entries XArray: Fix xa_erase of 2-byte aligned entries XArray: Use xa_cmpxchg to implement xa_reserve XArray: Fix xa_release in allocating arrays XArray: Mark xa_insert and xa_reserve as must_check XArray: Add cyclic allocation XArray: Redesign xa_alloc API XArray: Add support for 1s-based allocation XArray: Change xa_insert to return -EBUSY XArray: Update xa_erase family descriptions XArray tests: RCU lock prohibits GFP_KERNEL
2019-03-12 12:06:18 +09:00
ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL);
if (ret)
goto out;
xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED);
list_add_tail(&client->list, &client_list);
out:
up_write(&clients_rwsem);
return ret;
}
/**
* ib_register_client - Register an IB client
* @client:Client to register
*
* Upper level users of the IB drivers can use ib_register_client() to
* register callbacks for IB device addition and removal. When an IB
* device is added, each registered client's add method will be called
* (in the order the clients were registered), and when a device is
* removed, each client's remove method will be called (in the reverse
* order that clients were registered). In addition, when
* ib_register_client() is called, the client will receive an add
* callback for all devices already registered.
*/
int ib_register_client(struct ib_client *client)
{
struct ib_device *device;
unsigned long index;
int ret;
ret = assign_client_id(client);
if (ret)
return ret;
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, device, DEVICE_REGISTERED) {
ret = add_client_context(device, client);
if (ret) {
up_read(&devices_rwsem);
ib_unregister_client(client);
return ret;
}
}
up_read(&devices_rwsem);
return 0;
}
EXPORT_SYMBOL(ib_register_client);
/**
* ib_unregister_client - Unregister an IB client
* @client:Client to unregister
*
* Upper level users use ib_unregister_client() to remove their client
* registration. When ib_unregister_client() is called, the client
* will receive a remove callback for each IB device still registered.
*
* This is a full fence, once it returns no client callbacks will be called,
* or are running in another thread.
*/
void ib_unregister_client(struct ib_client *client)
{
struct ib_device *device;
unsigned long index;
down_write(&clients_rwsem);
xa_clear_mark(&clients, client->client_id, CLIENT_REGISTERED);
up_write(&clients_rwsem);
/*
* Every device still known must be serialized to make sure we are
* done with the client callbacks before we return.
*/
down_read(&devices_rwsem);
xa_for_each (&devices, index, device)
remove_client_context(device, client->client_id);
up_read(&devices_rwsem);
down_write(&clients_rwsem);
list_del(&client->list);
xa_erase(&clients, client->client_id);
up_write(&clients_rwsem);
}
EXPORT_SYMBOL(ib_unregister_client);
/**
* ib_set_client_data - Set IB client context
* @device:Device to set context for
* @client:Client to set context for
* @data:Context to set
*
* ib_set_client_data() sets client context data that can be retrieved with
* ib_get_client_data(). This can only be called while the client is
* registered to the device, once the ib_client remove() callback returns this
* cannot be called.
*/
void ib_set_client_data(struct ib_device *device, struct ib_client *client,
void *data)
{
void *rc;
if (WARN_ON(IS_ERR(data)))
data = NULL;
rc = xa_store(&device->client_data, client->client_id, data,
GFP_KERNEL);
WARN_ON(xa_is_err(rc));
}
EXPORT_SYMBOL(ib_set_client_data);
/**
* ib_register_event_handler - Register an IB event handler
* @event_handler:Handler to register
*
* ib_register_event_handler() registers an event handler that will be
* called back when asynchronous IB events occur (as defined in
* chapter 11 of the InfiniBand Architecture Specification). This
* callback may occur in interrupt context.
*/
void ib_register_event_handler(struct ib_event_handler *event_handler)
{
unsigned long flags;
spin_lock_irqsave(&event_handler->device->event_handler_lock, flags);
list_add_tail(&event_handler->list,
&event_handler->device->event_handler_list);
spin_unlock_irqrestore(&event_handler->device->event_handler_lock, flags);
}
EXPORT_SYMBOL(ib_register_event_handler);
/**
* ib_unregister_event_handler - Unregister an event handler
* @event_handler:Handler to unregister
*
* Unregister an event handler registered with
* ib_register_event_handler().
*/
void ib_unregister_event_handler(struct ib_event_handler *event_handler)
{
unsigned long flags;
spin_lock_irqsave(&event_handler->device->event_handler_lock, flags);
list_del(&event_handler->list);
spin_unlock_irqrestore(&event_handler->device->event_handler_lock, flags);
}
EXPORT_SYMBOL(ib_unregister_event_handler);
/**
* ib_dispatch_event - Dispatch an asynchronous event
* @event:Event to dispatch
*
* Low-level drivers must call ib_dispatch_event() to dispatch the
* event to all registered event handlers when an asynchronous event
* occurs.
*/
void ib_dispatch_event(struct ib_event *event)
{
unsigned long flags;
struct ib_event_handler *handler;
spin_lock_irqsave(&event->device->event_handler_lock, flags);
list_for_each_entry(handler, &event->device->event_handler_list, list)
handler->handler(handler, event);
spin_unlock_irqrestore(&event->device->event_handler_lock, flags);
}
EXPORT_SYMBOL(ib_dispatch_event);
/**
* ib_query_port - Query IB port attributes
* @device:Device to query
* @port_num:Port number to query
* @port_attr:Port attributes
*
* ib_query_port() returns the attributes of a port through the
* @port_attr pointer.
*/
int ib_query_port(struct ib_device *device,
u8 port_num,
struct ib_port_attr *port_attr)
{
union ib_gid gid;
int err;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
memset(port_attr, 0, sizeof(*port_attr));
err = device->ops.query_port(device, port_num, port_attr);
if (err || port_attr->subnet_prefix)
return err;
if (rdma_port_get_link_layer(device, port_num) != IB_LINK_LAYER_INFINIBAND)
return 0;
err = device->ops.query_gid(device, port_num, 0, &gid);
if (err)
return err;
port_attr->subnet_prefix = be64_to_cpu(gid.global.subnet_prefix);
return 0;
}
EXPORT_SYMBOL(ib_query_port);
static void add_ndev_hash(struct ib_port_data *pdata)
{
unsigned long flags;
might_sleep();
spin_lock_irqsave(&ndev_hash_lock, flags);
if (hash_hashed(&pdata->ndev_hash_link)) {
hash_del_rcu(&pdata->ndev_hash_link);
spin_unlock_irqrestore(&ndev_hash_lock, flags);
/*
* We cannot do hash_add_rcu after a hash_del_rcu until the
* grace period
*/
synchronize_rcu();
spin_lock_irqsave(&ndev_hash_lock, flags);
}
if (pdata->netdev)
hash_add_rcu(ndev_hash, &pdata->ndev_hash_link,
(uintptr_t)pdata->netdev);
spin_unlock_irqrestore(&ndev_hash_lock, flags);
}
/**
* ib_device_set_netdev - Associate the ib_dev with an underlying net_device
* @ib_dev: Device to modify
* @ndev: net_device to affiliate, may be NULL
* @port: IB port the net_device is connected to
*
* Drivers should use this to link the ib_device to a netdev so the netdev
* shows up in interfaces like ib_enum_roce_netdev. Only one netdev may be
* affiliated with any port.
*
* The caller must ensure that the given ndev is not unregistered or
* unregistering, and that either the ib_device is unregistered or
* ib_device_set_netdev() is called with NULL when the ndev sends a
* NETDEV_UNREGISTER event.
*/
int ib_device_set_netdev(struct ib_device *ib_dev, struct net_device *ndev,
unsigned int port)
{
struct net_device *old_ndev;
struct ib_port_data *pdata;
unsigned long flags;
int ret;
/*
* Drivers wish to call this before ib_register_driver, so we have to
* setup the port data early.
*/
ret = alloc_port_data(ib_dev);
if (ret)
return ret;
if (!rdma_is_port_valid(ib_dev, port))
return -EINVAL;
pdata = &ib_dev->port_data[port];
spin_lock_irqsave(&pdata->netdev_lock, flags);
old_ndev = rcu_dereference_protected(
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
if (old_ndev == ndev) {
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
return 0;
}
if (ndev)
dev_hold(ndev);
rcu_assign_pointer(pdata->netdev, ndev);
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
add_ndev_hash(pdata);
if (old_ndev)
dev_put(old_ndev);
return 0;
}
EXPORT_SYMBOL(ib_device_set_netdev);
static void free_netdevs(struct ib_device *ib_dev)
{
unsigned long flags;
unsigned int port;
RDMA/core: Fix panic when port_data isn't initialized This happens if assign_name() returns failure when called from ib_register_device(), that will lead to the following panic in every time that someone touches the port_data's data members. BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 19 PID: 1994 Comm: systemd-udevd Not tainted 5.1.0-rc5+ #1 Hardware name: HP ProLiant DL360p Gen8, BIOS P71 12/20/2013 RIP: 0010:_raw_spin_lock_irqsave+0x1e/0x40 Code: 85 ff 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 9c 58 66 66 90 66 90 48 89 c3 fa 66 66 90 66 66 90 31 c0 ba 01 00 00 00 <f0> 0f b1 17 0f 94 c2 84 d2 74 05 48 89 d8 5b c3 89 c6 e8 b4 85 8a RSP: 0018:ffffa8d7079a7c08 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000202 RCX: ffffa8d7079a7bf8 RDX: 0000000000000001 RSI: ffff93607c990000 RDI: 00000000000000c0 RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffc08c4dd8 R10: 0000000000000000 R11: 0000000000000001 R12: 00000000000000c0 R13: ffff93607c990000 R14: ffffffffc05a9740 R15: ffffa8d7079a7e98 FS: 00007f1c6ee438c0(0000) GS:ffff93609f6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000000819fca002 CR4: 00000000000606e0 Call Trace: free_netdevs+0x4d/0xe0 [ib_core] ib_dealloc_device+0x51/0xb0 [ib_core] __mlx5_ib_add+0x5e/0x70 [mlx5_ib] mlx5_add_device+0x57/0xe0 [mlx5_core] mlx5_register_interface+0x85/0xc0 [mlx5_core] ? 0xffffffffc0474000 do_one_initcall+0x4e/0x1d4 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x15f/0x1c0 do_init_module+0x5a/0x218 load_module+0x186b/0x1e40 ? m_show+0x1c0/0x1c0 __do_sys_finit_module+0x94/0xe0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 8ceb1357b337 ("RDMA/device: Consolidate ib_device per_port data into one place") Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-05-23 16:12:51 +09:00
if (!ib_dev->port_data)
return;
rdma_for_each_port (ib_dev, port) {
struct ib_port_data *pdata = &ib_dev->port_data[port];
struct net_device *ndev;
spin_lock_irqsave(&pdata->netdev_lock, flags);
ndev = rcu_dereference_protected(
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
if (ndev) {
spin_lock(&ndev_hash_lock);
hash_del_rcu(&pdata->ndev_hash_link);
spin_unlock(&ndev_hash_lock);
/*
* If this is the last dev_put there is still a
* synchronize_rcu before the netdev is kfreed, so we
* can continue to rely on unlocked pointer
* comparisons after the put
*/
rcu_assign_pointer(pdata->netdev, NULL);
dev_put(ndev);
}
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
}
}
struct net_device *ib_device_get_netdev(struct ib_device *ib_dev,
unsigned int port)
{
struct ib_port_data *pdata;
struct net_device *res;
if (!rdma_is_port_valid(ib_dev, port))
return NULL;
pdata = &ib_dev->port_data[port];
/*
* New drivers should use ib_device_set_netdev() not the legacy
* get_netdev().
*/
if (ib_dev->ops.get_netdev)
res = ib_dev->ops.get_netdev(ib_dev, port);
else {
spin_lock(&pdata->netdev_lock);
res = rcu_dereference_protected(
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
if (res)
dev_hold(res);
spin_unlock(&pdata->netdev_lock);
}
/*
* If we are starting to unregister expedite things by preventing
* propagation of an unregistering netdev.
*/
if (res && res->reg_state != NETREG_REGISTERED) {
dev_put(res);
return NULL;
}
return res;
}
/**
* ib_device_get_by_netdev - Find an IB device associated with a netdev
* @ndev: netdev to locate
* @driver_id: The driver ID that must match (RDMA_DRIVER_UNKNOWN matches all)
*
* Find and hold an ib_device that is associated with a netdev via
* ib_device_set_netdev(). The caller must call ib_device_put() on the
* returned pointer.
*/
struct ib_device *ib_device_get_by_netdev(struct net_device *ndev,
enum rdma_driver_id driver_id)
{
struct ib_device *res = NULL;
struct ib_port_data *cur;
rcu_read_lock();
hash_for_each_possible_rcu (ndev_hash, cur, ndev_hash_link,
(uintptr_t)ndev) {
if (rcu_access_pointer(cur->netdev) == ndev &&
(driver_id == RDMA_DRIVER_UNKNOWN ||
cur->ib_dev->driver_id == driver_id) &&
ib_device_try_get(cur->ib_dev)) {
res = cur->ib_dev;
break;
}
}
rcu_read_unlock();
return res;
}
EXPORT_SYMBOL(ib_device_get_by_netdev);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
/**
* ib_enum_roce_netdev - enumerate all RoCE ports
* @ib_dev : IB device we want to query
* @filter: Should we call the callback?
* @filter_cookie: Cookie passed to filter
* @cb: Callback to call for each found RoCE ports
* @cookie: Cookie passed back to the callback
*
* Enumerates all of the physical RoCE ports of ib_dev
* which are related to netdevice and calls callback() on each
* device for which filter() function returns non zero.
*/
void ib_enum_roce_netdev(struct ib_device *ib_dev,
roce_netdev_filter filter,
void *filter_cookie,
roce_netdev_callback cb,
void *cookie)
{
unsigned int port;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
rdma_for_each_port (ib_dev, port)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
if (rdma_protocol_roce(ib_dev, port)) {
struct net_device *idev =
ib_device_get_netdev(ib_dev, port);
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
if (filter(ib_dev, port, idev, filter_cookie))
cb(ib_dev, port, idev, cookie);
if (idev)
dev_put(idev);
}
}
/**
* ib_enum_all_roce_netdevs - enumerate all RoCE devices
* @filter: Should we call the callback?
* @filter_cookie: Cookie passed to filter
* @cb: Callback to call for each found RoCE ports
* @cookie: Cookie passed back to the callback
*
* Enumerates all RoCE devices' physical ports which are related
* to netdevices and calls callback() on each device for which
* filter() function returns non zero.
*/
void ib_enum_all_roce_netdevs(roce_netdev_filter filter,
void *filter_cookie,
roce_netdev_callback cb,
void *cookie)
{
struct ib_device *dev;
unsigned long index;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED)
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
ib_enum_roce_netdev(dev, filter, filter_cookie, cb, cookie);
up_read(&devices_rwsem);
}
/**
* ib_enum_all_devs - enumerate all ib_devices
* @cb: Callback to call for each found ib_device
*
* Enumerates all ib_devices and calls callback() on each device.
*/
int ib_enum_all_devs(nldev_callback nldev_cb, struct sk_buff *skb,
struct netlink_callback *cb)
{
unsigned long index;
struct ib_device *dev;
unsigned int idx = 0;
int ret = 0;
down_read(&devices_rwsem);
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
if (!rdma_dev_access_netns(dev, sock_net(skb->sk)))
continue;
ret = nldev_cb(dev, skb, cb, idx);
if (ret)
break;
idx++;
}
up_read(&devices_rwsem);
return ret;
IB/core: Add RoCE GID table management RoCE GIDs are based on IP addresses configured on Ethernet net-devices which relate to the RDMA (RoCE) device port. Currently, each of the low-level drivers that support RoCE (ocrdma, mlx4) manages its own RoCE port GID table. As there's nothing which is essentially vendor specific, we generalize that, and enhance the RDMA core GID cache to do this job. In order to populate the GID table, we listen for events: (a) netdev up/down/change_addr events - if a netdev is built onto our RoCE device, we need to add/delete its IPs. This involves adding all GIDs related to this ndev, add default GIDs, etc. (b) inet events - add new GIDs (according to the IP addresses) to the table. For programming the port RoCE GID table, providers must implement the add_gid and del_gid callbacks. RoCE GID management requires us to state the associated net_device alongside the GID. This information is necessary in order to manage the GID table. For example, when a net_device is removed, its associated GIDs need to be removed as well. RoCE mandates generating a default GID for each port, based on the related net-device's IPv6 link local. In contrast to the GID based on the regular IPv6 link-local (as we generate GID per IP address), the default GID is also available when the net device is down (in order to support loopback). Locking is done as follows: The patch modify the GID table code both for new RoCE drivers implementing the add_gid/del_gid callbacks and for current RoCE and IB drivers that do not. The flows for updating the table are different, so the locking requirements are too. While updating RoCE GID table, protection against multiple writers is achieved via mutex_lock(&table->lock). Since writing to a table requires us to find an entry (possible a free entry) in the table and then modify it, this mutex protects both the find_gid and write_gid ensuring the atomicity of the action. Each entry in the GID cache is protected by rwlock. In RoCE, writing (usually results from netdev notifier) involves invoking the vendor's add_gid and del_gid callbacks, which could sleep. Therefore, an invalid flag is added for each entry. Updates for RoCE are done via a workqueue, thus sleeping is permitted. In IB, updates are done in write_lock_irq(&device->cache.lock), thus write_gid isn't allowed to sleep and add_gid/del_gid are not called. When passing net-device into/out-of the GID cache, the device is always passed held (dev_hold). The code uses a single work item for updating all RDMA devices, following a netdev or inet notifier. The patch moves the cache from being a client (which was incorrect, as the cache is part of the IB infrastructure) to being explicitly initialized/freed when a device is registered/removed. Signed-off-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2015-07-31 00:33:26 +09:00
}
/**
* ib_query_pkey - Get P_Key table entry
* @device:Device to query
* @port_num:Port number to query
* @index:P_Key table index to query
* @pkey:Returned P_Key
*
* ib_query_pkey() fetches the specified P_Key table entry.
*/
int ib_query_pkey(struct ib_device *device,
u8 port_num, u16 index, u16 *pkey)
{
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
return device->ops.query_pkey(device, port_num, index, pkey);
}
EXPORT_SYMBOL(ib_query_pkey);
/**
* ib_modify_device - Change IB device attributes
* @device:Device to modify
* @device_modify_mask:Mask of attributes to change
* @device_modify:New attribute values
*
* ib_modify_device() changes a device's attributes as specified by
* the @device_modify_mask and @device_modify structure.
*/
int ib_modify_device(struct ib_device *device,
int device_modify_mask,
struct ib_device_modify *device_modify)
{
if (!device->ops.modify_device)
return -ENOSYS;
return device->ops.modify_device(device, device_modify_mask,
device_modify);
}
EXPORT_SYMBOL(ib_modify_device);
/**
* ib_modify_port - Modifies the attributes for the specified port.
* @device: The device to modify.
* @port_num: The number of the port to modify.
* @port_modify_mask: Mask used to specify which attributes of the port
* to change.
* @port_modify: New attribute values for the port.
*
* ib_modify_port() changes a port's attributes as specified by the
* @port_modify_mask and @port_modify structure.
*/
int ib_modify_port(struct ib_device *device,
u8 port_num, int port_modify_mask,
struct ib_port_modify *port_modify)
{
int rc;
if (!rdma_is_port_valid(device, port_num))
return -EINVAL;
if (device->ops.modify_port)
rc = device->ops.modify_port(device, port_num,
port_modify_mask,
port_modify);
else
rc = rdma_protocol_roce(device, port_num) ? 0 : -ENOSYS;
return rc;
}
EXPORT_SYMBOL(ib_modify_port);
/**
* ib_find_gid - Returns the port number and GID table index where
* a specified GID value occurs. Its searches only for IB link layer.
* @device: The device to query.
* @gid: The GID value to search for.
* @port_num: The port number of the device where the GID value was found.
* @index: The index into the GID table where the GID was found. This
* parameter may be NULL.
*/
int ib_find_gid(struct ib_device *device, union ib_gid *gid,
u8 *port_num, u16 *index)
{
union ib_gid tmp_gid;
unsigned int port;
int ret, i;
rdma_for_each_port (device, port) {
if (!rdma_protocol_ib(device, port))
continue;
for (i = 0; i < device->port_data[port].immutable.gid_tbl_len;
++i) {
ret = rdma_query_gid(device, port, i, &tmp_gid);
if (ret)
return ret;
if (!memcmp(&tmp_gid, gid, sizeof *gid)) {
*port_num = port;
if (index)
*index = i;
return 0;
}
}
}
return -ENOENT;
}
EXPORT_SYMBOL(ib_find_gid);
/**
* ib_find_pkey - Returns the PKey table index where a specified
* PKey value occurs.
* @device: The device to query.
* @port_num: The port number of the device to search for the PKey.
* @pkey: The PKey value to search for.
* @index: The index into the PKey table where the PKey was found.
*/
int ib_find_pkey(struct ib_device *device,
u8 port_num, u16 pkey, u16 *index)
{
int ret, i;
u16 tmp_pkey;
int partial_ix = -1;
for (i = 0; i < device->port_data[port_num].immutable.pkey_tbl_len;
++i) {
ret = ib_query_pkey(device, port_num, i, &tmp_pkey);
if (ret)
return ret;
if ((pkey & 0x7fff) == (tmp_pkey & 0x7fff)) {
/* if there is full-member pkey take it.*/
if (tmp_pkey & 0x8000) {
*index = i;
return 0;
}
if (partial_ix < 0)
partial_ix = i;
}
}
/*no full-member, if exists take the limited*/
if (partial_ix >= 0) {
*index = partial_ix;
return 0;
}
return -ENOENT;
}
EXPORT_SYMBOL(ib_find_pkey);
/**
* ib_get_net_dev_by_params() - Return the appropriate net_dev
* for a received CM request
* @dev: An RDMA device on which the request has been received.
* @port: Port number on the RDMA device.
* @pkey: The Pkey the request came on.
* @gid: A GID that the net_dev uses to communicate.
* @addr: Contains the IP address that the request specified as its
* destination.
*
*/
struct net_device *ib_get_net_dev_by_params(struct ib_device *dev,
u8 port,
u16 pkey,
const union ib_gid *gid,
const struct sockaddr *addr)
{
struct net_device *net_dev = NULL;
unsigned long index;
void *client_data;
if (!rdma_protocol_ib(dev, port))
return NULL;
/*
* Holding the read side guarantees that the client will not become
* unregistered while we are calling get_net_dev_by_params()
*/
down_read(&dev->client_data_rwsem);
xan_for_each_marked (&dev->client_data, index, client_data,
CLIENT_DATA_REGISTERED) {
struct ib_client *client = xa_load(&clients, index);
if (!client || !client->get_net_dev_by_params)
continue;
net_dev = client->get_net_dev_by_params(dev, port, pkey, gid,
addr, client_data);
if (net_dev)
break;
}
up_read(&dev->client_data_rwsem);
return net_dev;
}
EXPORT_SYMBOL(ib_get_net_dev_by_params);
void ib_set_device_ops(struct ib_device *dev, const struct ib_device_ops *ops)
{
struct ib_device_ops *dev_ops = &dev->ops;
#define SET_DEVICE_OP(ptr, name) \
do { \
if (ops->name) \
if (!((ptr)->name)) \
(ptr)->name = ops->name; \
} while (0)
#define SET_OBJ_SIZE(ptr, name) SET_DEVICE_OP(ptr, size_##name)
SET_DEVICE_OP(dev_ops, add_gid);
SET_DEVICE_OP(dev_ops, advise_mr);
SET_DEVICE_OP(dev_ops, alloc_dm);
SET_DEVICE_OP(dev_ops, alloc_fmr);
SET_DEVICE_OP(dev_ops, alloc_hw_stats);
SET_DEVICE_OP(dev_ops, alloc_mr);
SET_DEVICE_OP(dev_ops, alloc_mw);
SET_DEVICE_OP(dev_ops, alloc_pd);
SET_DEVICE_OP(dev_ops, alloc_rdma_netdev);
SET_DEVICE_OP(dev_ops, alloc_ucontext);
SET_DEVICE_OP(dev_ops, alloc_xrcd);
SET_DEVICE_OP(dev_ops, attach_mcast);
SET_DEVICE_OP(dev_ops, check_mr_status);
SET_DEVICE_OP(dev_ops, create_ah);
SET_DEVICE_OP(dev_ops, create_counters);
SET_DEVICE_OP(dev_ops, create_cq);
SET_DEVICE_OP(dev_ops, create_flow);
SET_DEVICE_OP(dev_ops, create_flow_action_esp);
SET_DEVICE_OP(dev_ops, create_qp);
SET_DEVICE_OP(dev_ops, create_rwq_ind_table);
SET_DEVICE_OP(dev_ops, create_srq);
SET_DEVICE_OP(dev_ops, create_wq);
SET_DEVICE_OP(dev_ops, dealloc_dm);
SET_DEVICE_OP(dev_ops, dealloc_driver);
SET_DEVICE_OP(dev_ops, dealloc_fmr);
SET_DEVICE_OP(dev_ops, dealloc_mw);
SET_DEVICE_OP(dev_ops, dealloc_pd);
SET_DEVICE_OP(dev_ops, dealloc_ucontext);
SET_DEVICE_OP(dev_ops, dealloc_xrcd);
SET_DEVICE_OP(dev_ops, del_gid);
SET_DEVICE_OP(dev_ops, dereg_mr);
SET_DEVICE_OP(dev_ops, destroy_ah);
SET_DEVICE_OP(dev_ops, destroy_counters);
SET_DEVICE_OP(dev_ops, destroy_cq);
SET_DEVICE_OP(dev_ops, destroy_flow);
SET_DEVICE_OP(dev_ops, destroy_flow_action);
SET_DEVICE_OP(dev_ops, destroy_qp);
SET_DEVICE_OP(dev_ops, destroy_rwq_ind_table);
SET_DEVICE_OP(dev_ops, destroy_srq);
SET_DEVICE_OP(dev_ops, destroy_wq);
SET_DEVICE_OP(dev_ops, detach_mcast);
SET_DEVICE_OP(dev_ops, disassociate_ucontext);
SET_DEVICE_OP(dev_ops, drain_rq);
SET_DEVICE_OP(dev_ops, drain_sq);
SET_DEVICE_OP(dev_ops, enable_driver);
SET_DEVICE_OP(dev_ops, fill_res_entry);
SET_DEVICE_OP(dev_ops, get_dev_fw_str);
SET_DEVICE_OP(dev_ops, get_dma_mr);
SET_DEVICE_OP(dev_ops, get_hw_stats);
SET_DEVICE_OP(dev_ops, get_link_layer);
SET_DEVICE_OP(dev_ops, get_netdev);
SET_DEVICE_OP(dev_ops, get_port_immutable);
SET_DEVICE_OP(dev_ops, get_vector_affinity);
SET_DEVICE_OP(dev_ops, get_vf_config);
SET_DEVICE_OP(dev_ops, get_vf_stats);
SET_DEVICE_OP(dev_ops, init_port);
SET_DEVICE_OP(dev_ops, iw_accept);
SET_DEVICE_OP(dev_ops, iw_add_ref);
SET_DEVICE_OP(dev_ops, iw_connect);
SET_DEVICE_OP(dev_ops, iw_create_listen);
SET_DEVICE_OP(dev_ops, iw_destroy_listen);
SET_DEVICE_OP(dev_ops, iw_get_qp);
SET_DEVICE_OP(dev_ops, iw_reject);
SET_DEVICE_OP(dev_ops, iw_rem_ref);
SET_DEVICE_OP(dev_ops, map_mr_sg);
SET_DEVICE_OP(dev_ops, map_phys_fmr);
SET_DEVICE_OP(dev_ops, mmap);
SET_DEVICE_OP(dev_ops, modify_ah);
SET_DEVICE_OP(dev_ops, modify_cq);
SET_DEVICE_OP(dev_ops, modify_device);
SET_DEVICE_OP(dev_ops, modify_flow_action_esp);
SET_DEVICE_OP(dev_ops, modify_port);
SET_DEVICE_OP(dev_ops, modify_qp);
SET_DEVICE_OP(dev_ops, modify_srq);
SET_DEVICE_OP(dev_ops, modify_wq);
SET_DEVICE_OP(dev_ops, peek_cq);
SET_DEVICE_OP(dev_ops, poll_cq);
SET_DEVICE_OP(dev_ops, post_recv);
SET_DEVICE_OP(dev_ops, post_send);
SET_DEVICE_OP(dev_ops, post_srq_recv);
SET_DEVICE_OP(dev_ops, process_mad);
SET_DEVICE_OP(dev_ops, query_ah);
SET_DEVICE_OP(dev_ops, query_device);
SET_DEVICE_OP(dev_ops, query_gid);
SET_DEVICE_OP(dev_ops, query_pkey);
SET_DEVICE_OP(dev_ops, query_port);
SET_DEVICE_OP(dev_ops, query_qp);
SET_DEVICE_OP(dev_ops, query_srq);
SET_DEVICE_OP(dev_ops, rdma_netdev_get_params);
SET_DEVICE_OP(dev_ops, read_counters);
SET_DEVICE_OP(dev_ops, reg_dm_mr);
SET_DEVICE_OP(dev_ops, reg_user_mr);
SET_DEVICE_OP(dev_ops, req_ncomp_notif);
SET_DEVICE_OP(dev_ops, req_notify_cq);
SET_DEVICE_OP(dev_ops, rereg_user_mr);
SET_DEVICE_OP(dev_ops, resize_cq);
SET_DEVICE_OP(dev_ops, set_vf_guid);
SET_DEVICE_OP(dev_ops, set_vf_link_state);
SET_DEVICE_OP(dev_ops, unmap_fmr);
SET_OBJ_SIZE(dev_ops, ib_ah);
SET_OBJ_SIZE(dev_ops, ib_pd);
SET_OBJ_SIZE(dev_ops, ib_srq);
SET_OBJ_SIZE(dev_ops, ib_ucontext);
}
EXPORT_SYMBOL(ib_set_device_ops);
RDMA/netlink: Fix general protection fault The RDMA netlink core code checks validity of messages by ensuring that type and operand are in range. It works well for almost all clients except NLDEV, which has cb_table less than number of operands. Request to access such operand will trigger the following kernel panic. This patch updates all places where cb_table is declared for the consistency, but only NLDEV is actually need it. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 task: ffff8800657799c0 task.stack: ffff8800695d000 RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0 RSP: 0018:ffff8800695d7838 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7 RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000 R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0 FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rdma_nl_multicast+0x80/0x80 rdma_nl_rcv+0x36b/0x4d0 ? ibnl_put_attr+0xc0/0xc0 netlink_unicast+0x4bd/0x6d0 ? netlink_sendskb+0x50/0x50 ? drop_futex_key_refs.isra.4+0x68/0xb0 netlink_sendmsg+0x9ab/0xbd0 ? nlmsg_notify+0x140/0x140 ? wake_up_q+0xa1/0xf0 ? drop_futex_key_refs.isra.4+0x68/0xb0 sock_sendmsg+0x88/0xd0 sock_write_iter+0x228/0x3c0 ? sock_sendmsg+0xd0/0xd0 ? do_futex+0x3e5/0xb20 ? iov_iter_init+0xaf/0x1d0 __vfs_write+0x46e/0x640 ? sched_clock_cpu+0x1b/0x190 ? __vfs_read+0x620/0x620 ? __fget+0x23a/0x390 ? rw_verify_area+0xca/0x290 vfs_write+0x192/0x490 SyS_write+0xde/0x1c0 ? SyS_read+0x1c0/0x1c0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fee6a74a219 RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219 RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98 R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838 ---[ end trace ba085d123959c8ec ]--- Kernel panic - not syncing: Fatal exception Cc: syzkaller <syzkaller@googlegroups.com> Fixes: b4c598a67ea1 ("RDMA/netlink: Implement nldev device dumpit calback") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
2017-12-06 05:30:04 +09:00
static const struct rdma_nl_cbs ibnl_ls_cb_table[RDMA_NL_LS_NUM_OPS] = {
[RDMA_NL_LS_OP_RESOLVE] = {
.doit = ib_nl_handle_resolve_resp,
.flags = RDMA_NL_ADMIN_PERM,
},
[RDMA_NL_LS_OP_SET_TIMEOUT] = {
.doit = ib_nl_handle_set_timeout,
.flags = RDMA_NL_ADMIN_PERM,
},
[RDMA_NL_LS_OP_IP_RESOLVE] = {
.doit = ib_nl_handle_ip_res_resp,
.flags = RDMA_NL_ADMIN_PERM,
},
};
static int __init ib_core_init(void)
{
int ret;
ib_wq = alloc_workqueue("infiniband", 0, 0);
if (!ib_wq)
return -ENOMEM;
ib_comp_wq = alloc_workqueue("ib-comp-wq",
WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
if (!ib_comp_wq) {
ret = -ENOMEM;
goto err;
}
ib_comp_unbound_wq =
alloc_workqueue("ib-comp-unb-wq",
WQ_UNBOUND | WQ_HIGHPRI | WQ_MEM_RECLAIM |
WQ_SYSFS, WQ_UNBOUND_MAX_ACTIVE);
if (!ib_comp_unbound_wq) {
ret = -ENOMEM;
goto err_comp;
}
ret = class_register(&ib_class);
if (ret) {
pr_warn("Couldn't create InfiniBand device class\n");
goto err_comp_unbound;
}
ret = rdma_nl_init();
if (ret) {
pr_warn("Couldn't init IB netlink interface: err %d\n", ret);
goto err_sysfs;
}
ret = addr_init();
if (ret) {
pr_warn("Could't init IB address resolution\n");
goto err_ibnl;
}
ret = ib_mad_init();
if (ret) {
pr_warn("Couldn't init IB MAD\n");
goto err_addr;
}
ret = ib_sa_init();
if (ret) {
pr_warn("Couldn't init SA\n");
goto err_mad;
}
ret = register_lsm_notifier(&ibdev_lsm_nb);
if (ret) {
pr_warn("Couldn't register LSM notifier. ret %d\n", ret);
goto err_sa;
}
ret = register_pernet_device(&rdma_dev_net_ops);
if (ret) {
pr_warn("Couldn't init compat dev. ret %d\n", ret);
goto err_compat;
}
nldev_init();
rdma_nl_register(RDMA_NL_LS, ibnl_ls_cb_table);
roce_gid_mgmt_init();
return 0;
err_compat:
unregister_lsm_notifier(&ibdev_lsm_nb);
err_sa:
ib_sa_cleanup();
err_mad:
ib_mad_cleanup();
err_addr:
addr_cleanup();
err_ibnl:
rdma_nl_exit();
err_sysfs:
class_unregister(&ib_class);
err_comp_unbound:
destroy_workqueue(ib_comp_unbound_wq);
err_comp:
destroy_workqueue(ib_comp_wq);
err:
destroy_workqueue(ib_wq);
return ret;
}
static void __exit ib_core_cleanup(void)
{
roce_gid_mgmt_cleanup();
nldev_exit();
rdma_nl_unregister(RDMA_NL_LS);
unregister_pernet_device(&rdma_dev_net_ops);
unregister_lsm_notifier(&ibdev_lsm_nb);
ib_sa_cleanup();
ib_mad_cleanup();
addr_cleanup();
rdma_nl_exit();
class_unregister(&ib_class);
destroy_workqueue(ib_comp_unbound_wq);
destroy_workqueue(ib_comp_wq);
IB/uverbs: Export ib_umem_get()/ib_umem_release() to modules Export ib_umem_get()/ib_umem_release() and put low-level drivers in control of when to call ib_umem_get() to pin and DMA map userspace, rather than always calling it in ib_uverbs_reg_mr() before calling the low-level driver's reg_user_mr method. Also move these functions to be in the ib_core module instead of ib_uverbs, so that driver modules using them do not depend on ib_uverbs. This has a number of advantages: - It is better design from the standpoint of making generic code a library that can be used or overridden by device-specific code as the details of specific devices dictate. - Drivers that do not need to pin userspace memory regions do not need to take the performance hit of calling ib_mem_get(). For example, although I have not tried to implement it in this patch, the ipath driver should be able to avoid pinning memory and just use copy_{to,from}_user() to access userspace memory regions. - Buffers that need special mapping treatment can be identified by the low-level driver. For example, it may be possible to solve some Altix-specific memory ordering issues with mthca CQs in userspace by mapping CQ buffers with extra flags. - Drivers that need to pin and DMA map userspace memory for things other than memory regions can use ib_umem_get() directly, instead of hacks using extra parameters to their reg_phys_mr method. For example, the mlx4 driver that is pending being merged needs to pin and DMA map QP and CQ buffers, but it does not need to create a memory key for these buffers. So the cleanest solution is for mlx4 to call ib_umem_get() in the create_qp and create_cq methods. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-03-05 09:15:11 +09:00
/* Make sure that any pending umem accounting work is done. */
destroy_workqueue(ib_wq);
flush_workqueue(system_unbound_wq);
WARN_ON(!xa_empty(&clients));
WARN_ON(!xa_empty(&devices));
}
MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_LS, 4);
/* ib core relies on netdev stack to first register net_ns_type_operations
* ns kobject type before ib_core initialization.
*/
fs_initcall(ib_core_init);
module_exit(ib_core_cleanup);