linux-brain/arch/x86/kernel/cpu/mce/severity.c

421 lines
11 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* MCE grading rules.
* Copyright 2008, 2009 Intel Corporation.
*
* Author: Andi Kleen
*/
#include <linux/kernel.h>
#include <linux/seq_file.h>
#include <linux/init.h>
#include <linux/debugfs.h>
#include <asm/mce.h>
#include <linux/uaccess.h>
#include "internal.h"
/*
* Grade an mce by severity. In general the most severe ones are processed
* first. Since there are quite a lot of combinations test the bits in a
* table-driven way. The rules are simply processed in order, first
* match wins.
*
* Note this is only used for machine check exceptions, the corrected
* errors use much simpler rules. The exceptions still check for the corrected
* errors, but only to leave them alone for the CMCI handler (except for
* panic situations)
*/
enum context { IN_KERNEL = 1, IN_USER = 2, IN_KERNEL_RECOV = 3 };
enum ser { SER_REQUIRED = 1, NO_SER = 2 };
enum exception { EXCP_CONTEXT = 1, NO_EXCP = 2 };
static struct severity {
u64 mask;
u64 result;
unsigned char sev;
unsigned char mcgmask;
unsigned char mcgres;
unsigned char ser;
unsigned char context;
unsigned char excp;
unsigned char covered;
char *msg;
} severities[] = {
#define MCESEV(s, m, c...) { .sev = MCE_ ## s ## _SEVERITY, .msg = m, ## c }
#define KERNEL .context = IN_KERNEL
#define USER .context = IN_USER
#define KERNEL_RECOV .context = IN_KERNEL_RECOV
#define SER .ser = SER_REQUIRED
#define NOSER .ser = NO_SER
#define EXCP .excp = EXCP_CONTEXT
#define NOEXCP .excp = NO_EXCP
#define BITCLR(x) .mask = x, .result = 0
#define BITSET(x) .mask = x, .result = x
#define MCGMASK(x, y) .mcgmask = x, .mcgres = y
#define MASK(x, y) .mask = x, .result = y
#define MCI_UC_S (MCI_STATUS_UC|MCI_STATUS_S)
x86/MCE: Extend table to report action optional errors through CMCI too According to the Intel SDM Volume 3B (253669-063US, July 2017), action optional (SRAO) errors can be reported either via MCE or CMC: In cases when SRAO is signaled via CMCI the error signature is indicated via UC=1, PCC=0, S=0. Type(*1) UC EN PCC S AR Signaling --------------------------------------------------------------- UC 1 1 1 x x MCE SRAR 1 1 0 1 1 MCE SRAO 1 x(*2) 0 x(*2) 0 MCE/CMC UCNA 1 x 0 0 0 CMC CE 0 x x x x CMC NOTES: 1. SRAR, SRAO and UCNA errors are supported by the processor only when IA32_MCG_CAP[24] (MCG_SER_P) is set. 2. EN=1, S=1 when signaled via MCE. EN=x, S=0 when signaled via CMC. And there is a description in 15.6.2 UCR Error Reporting and Logging, for bit S: S (Signaling) flag, bit 56 - Indicates (when set) that a machine check exception was generated for the UCR error reported in this MC bank... When the S flag in the IA32_MCi_STATUS register is clear, this UCR error was not signaled via a machine check exception and instead was reported as a corrected machine check (CMC). So merge the two cases and just remove the S=0 check for SRAO in mce_severity(). [ Borislav: Massage commit message.] Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Tested-by: Chen Wei <chenwei68@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1511575548-41992-1-git-send-email-xiexiuqi@huawei.com
2017-12-05 01:54:37 +09:00
#define MCI_UC_AR (MCI_STATUS_UC|MCI_STATUS_AR)
#define MCI_UC_SAR (MCI_STATUS_UC|MCI_STATUS_S|MCI_STATUS_AR)
#define MCI_ADDR (MCI_STATUS_ADDRV|MCI_STATUS_MISCV)
MCESEV(
NO, "Invalid",
BITCLR(MCI_STATUS_VAL)
),
MCESEV(
NO, "Not enabled",
EXCP, BITCLR(MCI_STATUS_EN)
),
MCESEV(
PANIC, "Processor context corrupt",
BITSET(MCI_STATUS_PCC)
),
/* When MCIP is not set something is very confused */
MCESEV(
PANIC, "MCIP not set in MCA handler",
EXCP, MCGMASK(MCG_STATUS_MCIP, 0)
),
/* Neither return not error IP -- no chance to recover -> PANIC */
MCESEV(
PANIC, "Neither restart nor error IP",
EXCP, MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, 0)
),
MCESEV(
PANIC, "In kernel and no restart IP",
EXCP, KERNEL, MCGMASK(MCG_STATUS_RIPV, 0)
),
MCESEV(
PANIC, "In kernel and no restart IP",
EXCP, KERNEL_RECOV, MCGMASK(MCG_STATUS_RIPV, 0)
),
MCESEV(
DEFERRED, "Deferred error",
NOSER, MASK(MCI_STATUS_UC|MCI_STATUS_DEFERRED|MCI_STATUS_POISON, MCI_STATUS_DEFERRED)
),
MCESEV(
KEEP, "Corrected error",
NOSER, BITCLR(MCI_STATUS_UC)
),
x86/MCE: Extend table to report action optional errors through CMCI too According to the Intel SDM Volume 3B (253669-063US, July 2017), action optional (SRAO) errors can be reported either via MCE or CMC: In cases when SRAO is signaled via CMCI the error signature is indicated via UC=1, PCC=0, S=0. Type(*1) UC EN PCC S AR Signaling --------------------------------------------------------------- UC 1 1 1 x x MCE SRAR 1 1 0 1 1 MCE SRAO 1 x(*2) 0 x(*2) 0 MCE/CMC UCNA 1 x 0 0 0 CMC CE 0 x x x x CMC NOTES: 1. SRAR, SRAO and UCNA errors are supported by the processor only when IA32_MCG_CAP[24] (MCG_SER_P) is set. 2. EN=1, S=1 when signaled via MCE. EN=x, S=0 when signaled via CMC. And there is a description in 15.6.2 UCR Error Reporting and Logging, for bit S: S (Signaling) flag, bit 56 - Indicates (when set) that a machine check exception was generated for the UCR error reported in this MC bank... When the S flag in the IA32_MCi_STATUS register is clear, this UCR error was not signaled via a machine check exception and instead was reported as a corrected machine check (CMC). So merge the two cases and just remove the S=0 check for SRAO in mce_severity(). [ Borislav: Massage commit message.] Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Tested-by: Chen Wei <chenwei68@huawei.com> Cc: linux-edac <linux-edac@vger.kernel.org> Link: http://lkml.kernel.org/r/1511575548-41992-1-git-send-email-xiexiuqi@huawei.com
2017-12-05 01:54:37 +09:00
/*
* known AO MCACODs reported via MCE or CMC:
*
* SRAO could be signaled either via a machine check exception or
* CMCI with the corresponding bit S 1 or 0. So we don't need to
* check bit S for SRAO.
*/
MCESEV(
AO, "Action optional: memory scrubbing error",
SER, MASK(MCI_STATUS_OVER|MCI_UC_AR|MCACOD_SCRUBMSK, MCI_STATUS_UC|MCACOD_SCRUB)
),
MCESEV(
AO, "Action optional: last level cache writeback error",
SER, MASK(MCI_STATUS_OVER|MCI_UC_AR|MCACOD, MCI_STATUS_UC|MCACOD_L3WB)
),
/* ignore OVER for UCNA */
MCESEV(
UCNA, "Uncorrected no action required",
SER, MASK(MCI_UC_SAR, MCI_STATUS_UC)
),
MCESEV(
PANIC, "Illegal combination (UCNA with AR=1)",
SER,
MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_UC|MCI_STATUS_AR)
),
MCESEV(
KEEP, "Non signalled machine check",
SER, BITCLR(MCI_STATUS_S)
),
MCESEV(
PANIC, "Action required with lost events",
SER, BITSET(MCI_STATUS_OVER|MCI_UC_SAR)
),
/* known AR MCACODs: */
#ifdef CONFIG_MEMORY_FAILURE
MCESEV(
KEEP, "Action required but unaffected thread is continuable",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR, MCI_UC_SAR|MCI_ADDR),
MCGMASK(MCG_STATUS_RIPV|MCG_STATUS_EIPV, MCG_STATUS_RIPV)
),
MCESEV(
AR, "Action required: data load in error recoverable area of kernel",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
KERNEL_RECOV
),
MCESEV(
AR, "Action required: data load error in a user process",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
USER
),
MCESEV(
AR, "Action required: instruction fetch error in a user process",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
USER
),
MCESEV(
PANIC, "Data load in unrecoverable area of kernel",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_DATA),
KERNEL
),
MCESEV(
PANIC, "Instruction fetch error in kernel",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR|MCI_ADDR|MCACOD, MCI_UC_SAR|MCI_ADDR|MCACOD_INSTR),
KERNEL
),
#endif
MCESEV(
PANIC, "Action required: unknown MCACOD",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_SAR)
),
MCESEV(
SOME, "Action optional: unknown MCACOD",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_UC_S)
),
MCESEV(
SOME, "Action optional with lost events",
SER, MASK(MCI_STATUS_OVER|MCI_UC_SAR, MCI_STATUS_OVER|MCI_UC_S)
),
MCESEV(
PANIC, "Overflowed uncorrected",
BITSET(MCI_STATUS_OVER|MCI_STATUS_UC)
),
MCESEV(
UC, "Uncorrected",
BITSET(MCI_STATUS_UC)
),
MCESEV(
SOME, "No match",
BITSET(0)
) /* always matches. keep at end */
};
#define mc_recoverable(mcg) (((mcg) & (MCG_STATUS_RIPV|MCG_STATUS_EIPV)) == \
(MCG_STATUS_RIPV|MCG_STATUS_EIPV))
/*
* If mcgstatus indicated that ip/cs on the stack were
* no good, then "m->cs" will be zero and we will have
* to assume the worst case (IN_KERNEL) as we actually
* have no idea what we were executing when the machine
* check hit.
* If we do have a good "m->cs" (or a faked one in the
* case we were executing in VM86 mode) we can use it to
* distinguish an exception taken in user from from one
* taken in the kernel.
*/
static int error_context(struct mce *m)
{
if ((m->cs & 3) == 3)
return IN_USER;
if (mc_recoverable(m->mcgstatus) && ex_has_fault_handler(m->ip))
return IN_KERNEL_RECOV;
return IN_KERNEL;
}
static int mce_severity_amd_smca(struct mce *m, enum context err_ctx)
{
u32 addr = MSR_AMD64_SMCA_MCx_CONFIG(m->bank);
u32 low, high;
/*
* We need to look at the following bits:
* - "succor" bit (data poisoning support), and
* - TCC bit (Task Context Corrupt)
* in MCi_STATUS to determine error severity.
*/
if (!mce_flags.succor)
return MCE_PANIC_SEVERITY;
if (rdmsr_safe(addr, &low, &high))
return MCE_PANIC_SEVERITY;
/* TCC (Task context corrupt). If set and if IN_KERNEL, panic. */
if ((low & MCI_CONFIG_MCAX) &&
(m->status & MCI_STATUS_TCC) &&
(err_ctx == IN_KERNEL))
return MCE_PANIC_SEVERITY;
/* ...otherwise invoke hwpoison handler. */
return MCE_AR_SEVERITY;
}
/*
* See AMD Error Scope Hierarchy table in a newer BKDG. For example
* 49125_15h_Models_30h-3Fh_BKDG.pdf, section "RAS Features"
*/
static int mce_severity_amd(struct mce *m, int tolerant, char **msg, bool is_excp)
{
enum context ctx = error_context(m);
/* Processor Context Corrupt, no need to fumble too much, die! */
if (m->status & MCI_STATUS_PCC)
return MCE_PANIC_SEVERITY;
if (m->status & MCI_STATUS_UC) {
if (ctx == IN_KERNEL)
return MCE_PANIC_SEVERITY;
/*
* On older systems where overflow_recov flag is not present, we
* should simply panic if an error overflow occurs. If
* overflow_recov flag is present and set, then software can try
* to at least kill process to prolong system operation.
*/
if (mce_flags.overflow_recov) {
if (mce_flags.smca)
return mce_severity_amd_smca(m, ctx);
/* kill current process */
return MCE_AR_SEVERITY;
} else {
/* at least one error was not logged */
if (m->status & MCI_STATUS_OVER)
return MCE_PANIC_SEVERITY;
}
/*
* For any other case, return MCE_UC_SEVERITY so that we log the
* error and exit #MC handler.
*/
return MCE_UC_SEVERITY;
}
/*
* deferred error: poll handler catches these and adds to mce_ring so
* memory-failure can take recovery actions.
*/
if (m->status & MCI_STATUS_DEFERRED)
return MCE_DEFERRED_SEVERITY;
/*
* corrected error: poll handler catches these and passes responsibility
* of decoding the error to EDAC
*/
return MCE_KEEP_SEVERITY;
}
static int mce_severity_intel(struct mce *m, int tolerant, char **msg, bool is_excp)
{
enum exception excp = (is_excp ? EXCP_CONTEXT : NO_EXCP);
enum context ctx = error_context(m);
struct severity *s;
for (s = severities;; s++) {
if ((m->status & s->mask) != s->result)
continue;
if ((m->mcgstatus & s->mcgmask) != s->mcgres)
continue;
if (s->ser == SER_REQUIRED && !mca_cfg.ser)
continue;
if (s->ser == NO_SER && mca_cfg.ser)
continue;
if (s->context && ctx != s->context)
continue;
if (s->excp && excp != s->excp)
continue;
if (msg)
*msg = s->msg;
s->covered = 1;
if (s->sev >= MCE_UC_SEVERITY && ctx == IN_KERNEL) {
if (tolerant < 1)
return MCE_PANIC_SEVERITY;
}
return s->sev;
}
}
/* Default to mce_severity_intel */
int (*mce_severity)(struct mce *m, int tolerant, char **msg, bool is_excp) =
mce_severity_intel;
void __init mcheck_vendor_init_severity(void)
{
if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD ||
boot_cpu_data.x86_vendor == X86_VENDOR_HYGON)
mce_severity = mce_severity_amd;
}
#ifdef CONFIG_DEBUG_FS
static void *s_start(struct seq_file *f, loff_t *pos)
{
if (*pos >= ARRAY_SIZE(severities))
return NULL;
return &severities[*pos];
}
static void *s_next(struct seq_file *f, void *data, loff_t *pos)
{
if (++(*pos) >= ARRAY_SIZE(severities))
return NULL;
return &severities[*pos];
}
static void s_stop(struct seq_file *f, void *data)
{
}
static int s_show(struct seq_file *f, void *data)
{
struct severity *ser = data;
seq_printf(f, "%d\t%s\n", ser->covered, ser->msg);
return 0;
}
static const struct seq_operations severities_seq_ops = {
.start = s_start,
.next = s_next,
.stop = s_stop,
.show = s_show,
};
static int severities_coverage_open(struct inode *inode, struct file *file)
{
return seq_open(file, &severities_seq_ops);
}
static ssize_t severities_coverage_write(struct file *file,
const char __user *ubuf,
size_t count, loff_t *ppos)
{
int i;
for (i = 0; i < ARRAY_SIZE(severities); i++)
severities[i].covered = 0;
return count;
}
static const struct file_operations severities_coverage_fops = {
.open = severities_coverage_open,
.release = seq_release,
.read = seq_read,
.write = severities_coverage_write,
llseek: automatically add .llseek fop All file_operations should get a .llseek operation so we can make nonseekable_open the default for future file operations without a .llseek pointer. The three cases that we can automatically detect are no_llseek, seq_lseek and default_llseek. For cases where we can we can automatically prove that the file offset is always ignored, we use noop_llseek, which maintains the current behavior of not returning an error from a seek. New drivers should normally not use noop_llseek but instead use no_llseek and call nonseekable_open at open time. Existing drivers can be converted to do the same when the maintainer knows for certain that no user code relies on calling seek on the device file. The generated code is often incorrectly indented and right now contains comments that clarify for each added line why a specific variant was chosen. In the version that gets submitted upstream, the comments will be gone and I will manually fix the indentation, because there does not seem to be a way to do that using coccinelle. Some amount of new code is currently sitting in linux-next that should get the same modifications, which I will do at the end of the merge window. Many thanks to Julia Lawall for helping me learn to write a semantic patch that does all this. ===== begin semantic patch ===== // This adds an llseek= method to all file operations, // as a preparation for making no_llseek the default. // // The rules are // - use no_llseek explicitly if we do nonseekable_open // - use seq_lseek for sequential files // - use default_llseek if we know we access f_pos // - use noop_llseek if we know we don't access f_pos, // but we still want to allow users to call lseek // @ open1 exists @ identifier nested_open; @@ nested_open(...) { <+... nonseekable_open(...) ...+> } @ open exists@ identifier open_f; identifier i, f; identifier open1.nested_open; @@ int open_f(struct inode *i, struct file *f) { <+... ( nonseekable_open(...) | nested_open(...) ) ...+> } @ read disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ read_no_fpos disable optional_qualifier exists @ identifier read_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off) { ... when != off } @ write @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; expression E; identifier func; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { <+... ( *off = E | *off += E | func(..., off, ...) | E = *off ) ...+> } @ write_no_fpos @ identifier write_f; identifier f, p, s, off; type ssize_t, size_t, loff_t; @@ ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off) { ... when != off } @ fops0 @ identifier fops; @@ struct file_operations fops = { ... }; @ has_llseek depends on fops0 @ identifier fops0.fops; identifier llseek_f; @@ struct file_operations fops = { ... .llseek = llseek_f, ... }; @ has_read depends on fops0 @ identifier fops0.fops; identifier read_f; @@ struct file_operations fops = { ... .read = read_f, ... }; @ has_write depends on fops0 @ identifier fops0.fops; identifier write_f; @@ struct file_operations fops = { ... .write = write_f, ... }; @ has_open depends on fops0 @ identifier fops0.fops; identifier open_f; @@ struct file_operations fops = { ... .open = open_f, ... }; // use no_llseek if we call nonseekable_open //////////////////////////////////////////// @ nonseekable1 depends on !has_llseek && has_open @ identifier fops0.fops; identifier nso ~= "nonseekable_open"; @@ struct file_operations fops = { ... .open = nso, ... +.llseek = no_llseek, /* nonseekable */ }; @ nonseekable2 depends on !has_llseek @ identifier fops0.fops; identifier open.open_f; @@ struct file_operations fops = { ... .open = open_f, ... +.llseek = no_llseek, /* open uses nonseekable */ }; // use seq_lseek for sequential files ///////////////////////////////////// @ seq depends on !has_llseek @ identifier fops0.fops; identifier sr ~= "seq_read"; @@ struct file_operations fops = { ... .read = sr, ... +.llseek = seq_lseek, /* we have seq_read */ }; // use default_llseek if there is a readdir /////////////////////////////////////////// @ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier readdir_e; @@ // any other fop is used that changes pos struct file_operations fops = { ... .readdir = readdir_e, ... +.llseek = default_llseek, /* readdir is present */ }; // use default_llseek if at least one of read/write touches f_pos ///////////////////////////////////////////////////////////////// @ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read.read_f; @@ // read fops use offset struct file_operations fops = { ... .read = read_f, ... +.llseek = default_llseek, /* read accesses f_pos */ }; @ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, ... + .llseek = default_llseek, /* write accesses f_pos */ }; // Use noop_llseek if neither read nor write accesses f_pos /////////////////////////////////////////////////////////// @ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; identifier write_no_fpos.write_f; @@ // write fops use offset struct file_operations fops = { ... .write = write_f, .read = read_f, ... +.llseek = noop_llseek, /* read and write both use no f_pos */ }; @ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier write_no_fpos.write_f; @@ struct file_operations fops = { ... .write = write_f, ... +.llseek = noop_llseek, /* write uses no f_pos */ }; @ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; identifier read_no_fpos.read_f; @@ struct file_operations fops = { ... .read = read_f, ... +.llseek = noop_llseek, /* read uses no f_pos */ }; @ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @ identifier fops0.fops; @@ struct file_operations fops = { ... +.llseek = noop_llseek, /* no read or write fn */ }; ===== End semantic patch ===== Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Julia Lawall <julia@diku.dk> Cc: Christoph Hellwig <hch@infradead.org>
2010-08-16 01:52:59 +09:00
.llseek = seq_lseek,
};
static int __init severities_debugfs_init(void)
{
struct dentry *dmce, *fsev;
dmce = mce_get_debugfs_dir();
if (!dmce)
goto err_out;
fsev = debugfs_create_file("severities-coverage", 0444, dmce, NULL,
&severities_coverage_fops);
if (!fsev)
goto err_out;
return 0;
err_out:
return -ENOMEM;
}
late_initcall(severities_debugfs_init);
#endif /* CONFIG_DEBUG_FS */