linux-brain/arch/arm/mach-w90x900/dev.c

538 lines
12 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-w90x900/dev.c
*
* Copyright (C) 2009 Nuvoton corporation.
*
* Wan ZongShun <mcuos.com@gmail.com>
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/mtd/physmap.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <asm/system_misc.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach-types.h>
#include <mach/regs-serial.h>
#include <linux/platform_data/spi-nuc900.h>
#include <mach/map.h>
#include <linux/platform_data/video-nuc900fb.h>
#include <mach/regs-ldm.h>
#include <linux/platform_data/keypad-w90p910.h>
#include "cpu.h"
/*NUC900 evb norflash driver data */
#define NUC900_FLASH_BASE 0xA0000000
#define NUC900_FLASH_SIZE 0x400000
#define SPIOFFSET 0x200
#define SPIOREG_SIZE 0x100
static struct mtd_partition nuc900_flash_partitions[] = {
{
.name = "NOR Partition 1 for kernel (960K)",
.size = 0xF0000,
.offset = 0x10000,
},
{
.name = "NOR Partition 2 for image (1M)",
.size = 0x100000,
.offset = 0x100000,
},
{
.name = "NOR Partition 3 for user (2M)",
.size = 0x200000,
.offset = 0x00200000,
}
};
static struct physmap_flash_data nuc900_flash_data = {
.width = 2,
.parts = nuc900_flash_partitions,
.nr_parts = ARRAY_SIZE(nuc900_flash_partitions),
};
static struct resource nuc900_flash_resources[] = {
{
.start = NUC900_FLASH_BASE,
.end = NUC900_FLASH_BASE + NUC900_FLASH_SIZE - 1,
.flags = IORESOURCE_MEM,
}
};
static struct platform_device nuc900_flash_device = {
.name = "physmap-flash",
.id = 0,
.dev = {
.platform_data = &nuc900_flash_data,
},
.resource = nuc900_flash_resources,
.num_resources = ARRAY_SIZE(nuc900_flash_resources),
};
/* USB EHCI Host Controller */
static struct resource nuc900_usb_ehci_resource[] = {
[0] = {
.start = W90X900_PA_USBEHCIHOST,
.end = W90X900_PA_USBEHCIHOST + W90X900_SZ_USBEHCIHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBH,
.end = IRQ_USBH,
.flags = IORESOURCE_IRQ,
}
};
static u64 nuc900_device_usb_ehci_dmamask = 0xffffffffUL;
static struct platform_device nuc900_device_usb_ehci = {
.name = "nuc900-ehci",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_usb_ehci_resource),
.resource = nuc900_usb_ehci_resource,
.dev = {
.dma_mask = &nuc900_device_usb_ehci_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
};
/* USB OHCI Host Controller */
static struct resource nuc900_usb_ohci_resource[] = {
[0] = {
.start = W90X900_PA_USBOHCIHOST,
.end = W90X900_PA_USBOHCIHOST + W90X900_SZ_USBOHCIHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBH,
.end = IRQ_USBH,
.flags = IORESOURCE_IRQ,
}
};
static u64 nuc900_device_usb_ohci_dmamask = 0xffffffffUL;
static struct platform_device nuc900_device_usb_ohci = {
.name = "nuc900-ohci",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_usb_ohci_resource),
.resource = nuc900_usb_ohci_resource,
.dev = {
.dma_mask = &nuc900_device_usb_ohci_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
};
/* USB Device (Gadget)*/
static struct resource nuc900_usbgadget_resource[] = {
[0] = {
.start = W90X900_PA_USBDEV,
.end = W90X900_PA_USBDEV + W90X900_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_USBD,
.end = IRQ_USBD,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device nuc900_device_usbgadget = {
.name = "nuc900-usbgadget",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_usbgadget_resource),
.resource = nuc900_usbgadget_resource,
};
/* MAC device */
static struct resource nuc900_emc_resource[] = {
[0] = {
.start = W90X900_PA_EMC,
.end = W90X900_PA_EMC + W90X900_SZ_EMC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EMCTX,
.end = IRQ_EMCTX,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_EMCRX,
.end = IRQ_EMCRX,
.flags = IORESOURCE_IRQ,
}
};
static u64 nuc900_device_emc_dmamask = 0xffffffffUL;
static struct platform_device nuc900_device_emc = {
.name = "nuc900-emc",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_emc_resource),
.resource = nuc900_emc_resource,
.dev = {
.dma_mask = &nuc900_device_emc_dmamask,
.coherent_dma_mask = 0xffffffffUL
}
};
/* SPI device */
static struct nuc900_spi_info nuc900_spiflash_data = {
.num_cs = 1,
.lsb = 0,
.txneg = 1,
.rxneg = 0,
.divider = 24,
.sleep = 0,
.txnum = 0,
.txbitlen = 8,
.bus_num = 0,
};
static struct resource nuc900_spi_resource[] = {
[0] = {
.start = W90X900_PA_I2C + SPIOFFSET,
.end = W90X900_PA_I2C + SPIOFFSET + SPIOREG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SSP,
.end = IRQ_SSP,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device nuc900_device_spi = {
.name = "nuc900-spi",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_spi_resource),
.resource = nuc900_spi_resource,
.dev = {
.platform_data = &nuc900_spiflash_data,
}
};
/* spi device, spi flash info */
static struct mtd_partition nuc900_spi_flash_partitions[] = {
{
.name = "bootloader(spi)",
.size = 0x0100000,
.offset = 0,
},
};
static struct flash_platform_data nuc900_spi_flash_data = {
.name = "m25p80",
.parts = nuc900_spi_flash_partitions,
.nr_parts = ARRAY_SIZE(nuc900_spi_flash_partitions),
.type = "w25x16",
};
static struct spi_board_info nuc900_spi_board_info[] __initdata = {
{
.modalias = "m25p80",
.max_speed_hz = 20000000,
.bus_num = 0,
.chip_select = 0,
.platform_data = &nuc900_spi_flash_data,
.mode = SPI_MODE_0,
},
};
/* WDT Device */
static struct resource nuc900_wdt_resource[] = {
[0] = {
.start = W90X900_PA_TIMER,
.end = W90X900_PA_TIMER + W90X900_SZ_TIMER - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_WDT,
.end = IRQ_WDT,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device nuc900_device_wdt = {
.name = "nuc900-wdt",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_wdt_resource),
.resource = nuc900_wdt_resource,
};
/*
* public device definition between 910 and 920, or 910
* and 950 or 950 and 960...,their dev platform register
* should be in specific file such as nuc950, nuc960 c
* files rather than the public dev.c file here. so the
* corresponding platform_device definition should not be
* static.
*/
/* RTC controller*/
static struct resource nuc900_rtc_resource[] = {
[0] = {
.start = W90X900_PA_RTC,
.end = W90X900_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_RTC,
.end = IRQ_RTC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device nuc900_device_rtc = {
.name = "nuc900-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_rtc_resource),
.resource = nuc900_rtc_resource,
};
/*TouchScreen controller*/
static struct resource nuc900_ts_resource[] = {
[0] = {
.start = W90X900_PA_ADC,
.end = W90X900_PA_ADC + W90X900_SZ_ADC-1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_ADC,
.end = IRQ_ADC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device nuc900_device_ts = {
.name = "nuc900-ts",
.id = -1,
.resource = nuc900_ts_resource,
.num_resources = ARRAY_SIZE(nuc900_ts_resource),
};
/* FMI Device */
static struct resource nuc900_fmi_resource[] = {
[0] = {
.start = W90X900_PA_FMI,
.end = W90X900_PA_FMI + W90X900_SZ_FMI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_FMI,
.end = IRQ_FMI,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device nuc900_device_fmi = {
.name = "nuc900-fmi",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_fmi_resource),
.resource = nuc900_fmi_resource,
};
/* KPI controller*/
static int nuc900_keymap[] = {
KEY(0, 0, KEY_A),
KEY(0, 1, KEY_B),
KEY(0, 2, KEY_C),
KEY(0, 3, KEY_D),
KEY(1, 0, KEY_E),
KEY(1, 1, KEY_F),
KEY(1, 2, KEY_G),
KEY(1, 3, KEY_H),
KEY(2, 0, KEY_I),
KEY(2, 1, KEY_J),
KEY(2, 2, KEY_K),
KEY(2, 3, KEY_L),
KEY(3, 0, KEY_M),
KEY(3, 1, KEY_N),
KEY(3, 2, KEY_O),
KEY(3, 3, KEY_P),
};
static struct matrix_keymap_data nuc900_map_data = {
.keymap = nuc900_keymap,
.keymap_size = ARRAY_SIZE(nuc900_keymap),
};
struct w90p910_keypad_platform_data nuc900_keypad_info = {
.keymap_data = &nuc900_map_data,
.prescale = 0xfa,
.debounce = 0x50,
};
static struct resource nuc900_kpi_resource[] = {
[0] = {
.start = W90X900_PA_KPI,
.end = W90X900_PA_KPI + W90X900_SZ_KPI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_KPI,
.end = IRQ_KPI,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device nuc900_device_kpi = {
.name = "nuc900-kpi",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_kpi_resource),
.resource = nuc900_kpi_resource,
.dev = {
.platform_data = &nuc900_keypad_info,
}
};
/* LCD controller*/
static struct nuc900fb_display nuc900_lcd_info[] = {
/* Giantplus Technology GPM1040A0 320x240 Color TFT LCD */
[0] = {
.type = LCM_DCCS_VA_SRC_RGB565,
.width = 320,
.height = 240,
.xres = 320,
.yres = 240,
.bpp = 16,
.pixclock = 200000,
.left_margin = 34,
.right_margin = 54,
.hsync_len = 10,
.upper_margin = 18,
.lower_margin = 4,
.vsync_len = 1,
.dccs = 0x8e00041a,
.devctl = 0x060800c0,
.fbctrl = 0x00a000a0,
.scale = 0x04000400,
},
};
static struct nuc900fb_mach_info nuc900_fb_info = {
#if defined(CONFIG_GPM1040A0_320X240)
.displays = &nuc900_lcd_info[0],
#else
.displays = nuc900_lcd_info,
#endif
.num_displays = ARRAY_SIZE(nuc900_lcd_info),
.default_display = 0,
.gpio_dir = 0x00000004,
.gpio_dir_mask = 0xFFFFFFFD,
.gpio_data = 0x00000004,
.gpio_data_mask = 0xFFFFFFFD,
};
static struct resource nuc900_lcd_resource[] = {
[0] = {
.start = W90X900_PA_LCD,
.end = W90X900_PA_LCD + W90X900_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_LCD,
.end = IRQ_LCD,
.flags = IORESOURCE_IRQ,
}
};
static u64 nuc900_device_lcd_dmamask = -1;
struct platform_device nuc900_device_lcd = {
.name = "nuc900-lcd",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_lcd_resource),
.resource = nuc900_lcd_resource,
.dev = {
.dma_mask = &nuc900_device_lcd_dmamask,
.coherent_dma_mask = -1,
.platform_data = &nuc900_fb_info,
}
};
/* AUDIO controller*/
static u64 nuc900_device_audio_dmamask = -1;
static struct resource nuc900_ac97_resource[] = {
[0] = {
.start = W90X900_PA_ACTL,
.end = W90X900_PA_ACTL + W90X900_SZ_ACTL - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_ACTL,
.end = IRQ_ACTL,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device nuc900_device_ac97 = {
.name = "nuc900-ac97",
.id = -1,
.num_resources = ARRAY_SIZE(nuc900_ac97_resource),
.resource = nuc900_ac97_resource,
.dev = {
.dma_mask = &nuc900_device_audio_dmamask,
.coherent_dma_mask = -1,
}
};
/*Here should be your evb resourse,such as LCD*/
static struct platform_device *nuc900_public_dev[] __initdata = {
&nuc900_serial_device,
&nuc900_flash_device,
&nuc900_device_usb_ehci,
&nuc900_device_usb_ohci,
&nuc900_device_usbgadget,
&nuc900_device_emc,
&nuc900_device_spi,
&nuc900_device_wdt,
&nuc900_device_ac97,
};
/* Provide adding specific CPU platform devices API */
void __init nuc900_board_init(struct platform_device **device, int size)
{
cpu_idle_poll_ctrl(true);
platform_add_devices(device, size);
platform_add_devices(nuc900_public_dev, ARRAY_SIZE(nuc900_public_dev));
spi_register_board_info(nuc900_spi_board_info,
ARRAY_SIZE(nuc900_spi_board_info));
}