linux-brain/arch/arm/boot/dts/exynos5420.dtsi

1481 lines
35 KiB
Plaintext
Raw Normal View History

/*
* SAMSUNG EXYNOS5420 SoC device tree source
*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SAMSUNG EXYNOS54200 SoC device nodes are listed in this file.
* EXYNOS5420 based board files can include this file and provide
* values for board specfic bindings.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "exynos54xx.dtsi"
#include <dt-bindings/clock/exynos5420.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "samsung,exynos5420", "samsung,exynos5";
aliases {
mshc0 = &mmc_0;
mshc1 = &mmc_1;
mshc2 = &mmc_2;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
pinctrl3 = &pinctrl_3;
pinctrl4 = &pinctrl_4;
i2c8 = &hsi2c_8;
i2c9 = &hsi2c_9;
i2c10 = &hsi2c_10;
gsc0 = &gsc_0;
gsc1 = &gsc_1;
spi0 = &spi_0;
spi1 = &spi_1;
spi2 = &spi_2;
};
/*
* The 'cpus' node is not present here but instead it is provided
* by exynos5420-cpus.dtsi or exynos5422-cpus.dtsi.
*/
soc: soc {
cluster_a15_opp_table: opp_table0 {
compatible = "operating-points-v2";
opp-shared;
opp@1800000000 {
opp-hz = /bits/ 64 <1800000000>;
opp-microvolt = <1250000>;
clock-latency-ns = <140000>;
};
opp@1700000000 {
opp-hz = /bits/ 64 <1700000000>;
opp-microvolt = <1212500>;
clock-latency-ns = <140000>;
};
opp@1600000000 {
opp-hz = /bits/ 64 <1600000000>;
opp-microvolt = <1175000>;
clock-latency-ns = <140000>;
};
opp@1500000000 {
opp-hz = /bits/ 64 <1500000000>;
opp-microvolt = <1137500>;
clock-latency-ns = <140000>;
};
opp@1400000000 {
opp-hz = /bits/ 64 <1400000000>;
opp-microvolt = <1112500>;
clock-latency-ns = <140000>;
};
opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1062500>;
clock-latency-ns = <140000>;
};
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1037500>;
clock-latency-ns = <140000>;
};
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1012500>;
clock-latency-ns = <140000>;
};
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = < 987500>;
clock-latency-ns = <140000>;
};
opp@900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = < 962500>;
clock-latency-ns = <140000>;
};
opp@800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = < 937500>;
clock-latency-ns = <140000>;
};
opp@700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = < 912500>;
clock-latency-ns = <140000>;
};
};
cluster_a7_opp_table: opp_table1 {
compatible = "operating-points-v2";
opp-shared;
opp@1300000000 {
opp-hz = /bits/ 64 <1300000000>;
opp-microvolt = <1275000>;
clock-latency-ns = <140000>;
};
opp@1200000000 {
opp-hz = /bits/ 64 <1200000000>;
opp-microvolt = <1212500>;
clock-latency-ns = <140000>;
};
opp@1100000000 {
opp-hz = /bits/ 64 <1100000000>;
opp-microvolt = <1162500>;
clock-latency-ns = <140000>;
};
opp@1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <1112500>;
clock-latency-ns = <140000>;
};
opp@900000000 {
opp-hz = /bits/ 64 <900000000>;
opp-microvolt = <1062500>;
clock-latency-ns = <140000>;
};
opp@800000000 {
opp-hz = /bits/ 64 <800000000>;
opp-microvolt = <1025000>;
clock-latency-ns = <140000>;
};
opp@700000000 {
opp-hz = /bits/ 64 <700000000>;
opp-microvolt = <975000>;
clock-latency-ns = <140000>;
};
opp@600000000 {
opp-hz = /bits/ 64 <600000000>;
opp-microvolt = <937500>;
clock-latency-ns = <140000>;
};
};
cci: cci@10d20000 {
compatible = "arm,cci-400";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x10d20000 0x1000>;
ranges = <0x0 0x10d20000 0x6000>;
cci_control0: slave-if@4000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x4000 0x1000>;
};
cci_control1: slave-if@5000 {
compatible = "arm,cci-400-ctrl-if";
interface-type = "ace";
reg = <0x5000 0x1000>;
};
};
clock: clock-controller@10010000 {
compatible = "samsung,exynos5420-clock";
reg = <0x10010000 0x30000>;
#clock-cells = <1>;
};
clock_audss: audss-clock-controller@3810000 {
compatible = "samsung,exynos5420-audss-clock";
reg = <0x03810000 0x0C>;
#clock-cells = <1>;
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MAU_EPLL>,
<&clock CLK_SCLK_MAUDIO0>, <&clock CLK_SCLK_MAUPCM0>;
clock-names = "pll_ref", "pll_in", "sclk_audio", "sclk_pcm_in";
};
mfc: codec@11000000 {
compatible = "samsung,mfc-v7";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
clocks = <&clock CLK_MFC>;
clock-names = "mfc";
power-domains = <&mfc_pd>;
iommus = <&sysmmu_mfc_l>, <&sysmmu_mfc_r>;
iommu-names = "left", "right";
};
mmc_0: mmc@12200000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
interrupts = <0 75 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12200000 0x2000>;
clocks = <&clock CLK_MMC0>, <&clock CLK_SCLK_MMC0>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
};
mmc_1: mmc@12210000 {
compatible = "samsung,exynos5420-dw-mshc-smu";
interrupts = <0 76 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12210000 0x2000>;
clocks = <&clock CLK_MMC1>, <&clock CLK_SCLK_MMC1>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
};
mmc_2: mmc@12220000 {
compatible = "samsung,exynos5420-dw-mshc";
interrupts = <0 77 0>;
#address-cells = <1>;
#size-cells = <0>;
reg = <0x12220000 0x1000>;
clocks = <&clock CLK_MMC2>, <&clock CLK_SCLK_MMC2>;
clock-names = "biu", "ciu";
fifo-depth = <0x40>;
status = "disabled";
};
nocp_mem0_0: nocp@10CA1000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1000 0x200>;
status = "disabled";
};
nocp_mem0_1: nocp@10CA1400 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1400 0x200>;
status = "disabled";
};
nocp_mem1_0: nocp@10CA1800 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1800 0x200>;
status = "disabled";
};
nocp_mem1_1: nocp@10CA1C00 {
compatible = "samsung,exynos5420-nocp";
reg = <0x10CA1C00 0x200>;
status = "disabled";
};
nocp_g3d_0: nocp@11A51000 {
compatible = "samsung,exynos5420-nocp";
reg = <0x11A51000 0x200>;
status = "disabled";
};
nocp_g3d_1: nocp@11A51400 {
compatible = "samsung,exynos5420-nocp";
reg = <0x11A51400 0x200>;
status = "disabled";
};
gsc_pd: power-domain@10044000 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044000 0x20>;
#power-domain-cells = <0>;
clocks = <&clock CLK_FIN_PLL>,
<&clock CLK_MOUT_USER_ACLK300_GSCL>,
<&clock CLK_GSCL0>, <&clock CLK_GSCL1>;
clock-names = "oscclk", "clk0", "asb0", "asb1";
};
isp_pd: power-domain@10044020 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044020 0x20>;
#power-domain-cells = <0>;
};
mfc_pd: power-domain@10044060 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044060 0x20>;
Topic branch for adding Exynos 5410 Odroid XU board for v4.8. This brings support for Hardkernel's Odroid XU board. It was the first design with big.LITTLE SoC from Samsung: Exynos5410. The board is not very popular. Newer XU3 and XU4 got more attention. Board details: 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is enabled), 2. 2 GB DDR3 RAM, 3. PowerVR SGX544MP3 GPU (not enabled in DTS), 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4, 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of revisions though), 6. eMMC 4.5 and microSD slots. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJXVWVcAAoJEME3ZuaGi4PXFVQP/3JyYEYpBw+6tu0PasYz2cYr D2fprLkHlfFOY+wGdHoTuBsjsOj1nwTXyVAA/zhIqudgJFXH67vR+BABoCDVT7J0 /pYfMT4rm9Wa4ddKJnE6bv78IbAI52S1tzKsHRi+YlceVbKFUWJAqSsaJYVDOaci Sxg4/sbD2VcU7xlDNw2lSux6du3MEkdbarOd3l58eKMwvqSRCmvx7YultrrFwDhV JByy1VG+WXAWyaE59VRZ+kAGHMDTz7KK8YNjkUGmgJK0Ryd6C8kETw1ZC8fiA/tZ +QlnDehngSZ15x79RI7JUj/F+UY2QrMDzLk6qIa2E3sgWv4aJ0csFymk1+mUDhJF vO8EwqF+YnbwNG1mmzmqBgeQxb3EdKdM/onanpazIlQAlpaJIJpBbKR8x2Doa6TZ g/f37FQW3l1DEBT3H2IXd6Yx1FgCnlFjPb0fwnS5sG05YyOEKdKTss+5LKShG5J4 VeN8/EmaocRvQx0GE0pRr0nhuaWt9E59jXrAmBe8OUVIjQYTvxRoH2mWEQ0iuOEZ +VRD/WwtkdqeUBOSFYckVWDanJPqh3qLZ+eCEqoguMKtqCTC3eJp2euIBsawA4DW Nxl6Zy5iIMfc7j4VtoDy7qDtBJ1hzeX8gzRE+tVXrtpiMs2gd1+Jkofr2nTIihU9 h/Hg9dc34pSV9by8hutW =7u0/ -----END PGP SIGNATURE----- Merge tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Topic branch for adding Exynos 5410 Odroid XU board for v4.8. This brings support for Hardkernel's Odroid XU board. It was the first design with big.LITTLE SoC from Samsung: Exynos5410. The board is not very popular. Newer XU3 and XU4 got more attention. Board details: 1. Exynos5410 octa-core (A15+A7, however as of now only one cluster is enabled), 2. 2 GB DDR3 RAM, 3. PowerVR SGX544MP3 GPU (not enabled in DTS), 4. USB 3.0 Host x 1, USB 3.0 OTG x 1, USB 2.0 Host x 4, 5. HDMI 1.4a, MIPI DSI and Display Port (Display Port not on all of revisions though), 6. eMMC 4.5 and microSD slots. * tag 'samsung-dt-odroid-xu-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits) ARM: dts: exynos: Add watchdog and Security SubSystem to Exynos5410 ARM: dts: exynos: Configure PWM, usb3503, PMIC and thermal on Odroid XU board ARM: dts: exynos: Add Thermal Management Unit to Exynos5410 ARM: dts: exynos: Interrupt for USB DWC3-1 differs between Exynos5420 and 5410 dt-bindings: clock: Add watchdog and SSS clock IDs to Exynos5410 dt-bindings: clock: Add TMU clock ID to Exynos5410 ARM: dts: exynos: Add RTC and I2C to Exynos5410 ARM: dts: exynos: Add I2C, PWM and UART pinctrl to Exynos5410 ARM: dts: exynos: Move HSI2C nodes to exynos54xx.dtsi ARM: dts: exynos: Add initial support for Odroid XU board ARM: dts: exynos: Add USB to Exynos5410 ARM: dts: exynos: Move common Exynos5410/542x/5800 nodes to new DTSI ARM: dts: exynos: MCT is not an interrupt controller and extend length of iomap ARM: dts: exynos: Enable UART3 on Exynos5410 ARM: dts: exynos: Include common exynos5 in exynos5410.dtsi ARM: dts: exynos: Move Exynos5250 and Exynos5420 nodes under soc ARM: dts: exynos: Use phandle to get parent node in exynos5250-snow ARM: dts: exynos: Prepare for inclusion of exynos5.dtsi in exynos5410.dtsi ARM: dts: exynos: Move common nodes to exynos5.dtsi ARM: dts: exynos: Split Odroid XU3 LEDs to separate DTSI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2016-06-14 06:51:58 +09:00
clocks = <&clock CLK_FIN_PLL>,
<&clock CLK_MOUT_USER_ACLK333>,
<&clock CLK_ACLK333>;
clock-names = "oscclk", "clk0","asb0";
#power-domain-cells = <0>;
};
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
#power-domain-cells = <0>;
};
disp_pd: power-domain@100440C0 {
compatible = "samsung,exynos4210-pd";
reg = <0x100440C0 0x20>;
#power-domain-cells = <0>;
clocks = <&clock CLK_FIN_PLL>,
<&clock CLK_MOUT_USER_ACLK200_DISP1>,
<&clock CLK_MOUT_USER_ACLK300_DISP1>,
<&clock CLK_MOUT_USER_ACLK400_DISP1>,
<&clock CLK_FIMD1>, <&clock CLK_MIXER>;
clock-names = "oscclk", "clk0", "clk1", "clk2", "asb0", "asb1";
};
pinctrl_0: pinctrl@13400000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13400000 0x1000>;
interrupts = <0 45 0>;
wakeup-interrupt-controller {
compatible = "samsung,exynos4210-wakeup-eint";
interrupt-parent = <&gic>;
interrupts = <0 32 0>;
};
};
pinctrl_1: pinctrl@13410000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x13410000 0x1000>;
interrupts = <0 78 0>;
};
pinctrl_2: pinctrl@14000000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14000000 0x1000>;
interrupts = <0 46 0>;
};
pinctrl_3: pinctrl@14010000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x14010000 0x1000>;
interrupts = <0 50 0>;
};
pinctrl_4: pinctrl@03860000 {
compatible = "samsung,exynos5420-pinctrl";
reg = <0x03860000 0x1000>;
interrupts = <0 47 0>;
};
amba {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&gic>;
ranges;
adma: adma@03880000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x03880000 0x1000>;
interrupts = <0 110 0>;
clocks = <&clock_audss EXYNOS_ADMA>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <6>;
#dma-requests = <16>;
};
pdma0: pdma@121A0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121A0000 0x1000>;
interrupts = <0 34 0>;
clocks = <&clock CLK_PDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
pdma1: pdma@121B0000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x121B0000 0x1000>;
interrupts = <0 35 0>;
clocks = <&clock CLK_PDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
};
mdma0: mdma@10800000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x10800000 0x1000>;
interrupts = <0 33 0>;
clocks = <&clock CLK_MDMA0>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
};
mdma1: mdma@11C10000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x11C10000 0x1000>;
interrupts = <0 124 0>;
clocks = <&clock CLK_MDMA1>;
clock-names = "apb_pclk";
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in
* the kernel for boards that run in secure
* mode, we are getting imprecise external
* aborts causing the kernel to oops.
*/
status = "disabled";
};
};
i2s0: i2s@03830000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x03830000 0x100>;
dmas = <&adma 0
&adma 2
&adma 1>;
dma-names = "tx", "rx", "tx-sec";
clocks = <&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_I2S_BUS>,
<&clock_audss EXYNOS_SCLK_I2S>;
clock-names = "iis", "i2s_opclk0", "i2s_opclk1";
#clock-cells = <1>;
clock-output-names = "i2s_cdclk0";
#sound-dai-cells = <1>;
samsung,idma-addr = <0x03000000>;
pinctrl-names = "default";
pinctrl-0 = <&i2s0_bus>;
status = "disabled";
};
i2s1: i2s@12D60000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x12D60000 0x100>;
dmas = <&pdma1 12
&pdma1 11>;
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S1>, <&clock CLK_SCLK_I2S1>;
clock-names = "iis", "i2s_opclk0";
#clock-cells = <1>;
clock-output-names = "i2s_cdclk1";
#sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s1_bus>;
status = "disabled";
};
i2s2: i2s@12D70000 {
compatible = "samsung,exynos5420-i2s";
reg = <0x12D70000 0x100>;
dmas = <&pdma0 12
&pdma0 11>;
dma-names = "tx", "rx";
clocks = <&clock CLK_I2S2>, <&clock CLK_SCLK_I2S2>;
clock-names = "iis", "i2s_opclk0";
#clock-cells = <1>;
clock-output-names = "i2s_cdclk2";
#sound-dai-cells = <1>;
pinctrl-names = "default";
pinctrl-0 = <&i2s2_bus>;
status = "disabled";
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
interrupts = <0 68 0>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_bus>;
clocks = <&clock CLK_SPI0>, <&clock CLK_SCLK_SPI0>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
interrupts = <0 69 0>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
clocks = <&clock CLK_SPI1>, <&clock CLK_SCLK_SPI1>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
interrupts = <0 70 0>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_bus>;
clocks = <&clock CLK_SPI2>, <&clock CLK_SCLK_SPI2>;
clock-names = "spi", "spi_busclk0";
status = "disabled";
};
dp_phy: dp-video-phy {
compatible = "samsung,exynos5420-dp-video-phy";
samsung,pmu-syscon = <&pmu_system_controller>;
#phy-cells = <0>;
};
mipi_phy: mipi-video-phy {
compatible = "samsung,s5pv210-mipi-video-phy";
syscon = <&pmu_system_controller>;
#phy-cells = <1>;
};
dsi@14500000 {
compatible = "samsung,exynos5410-mipi-dsi";
reg = <0x14500000 0x10000>;
interrupts = <0 82 0>;
phys = <&mipi_phy 1>;
phy-names = "dsim";
clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>;
clock-names = "bus_clk", "pll_clk";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
adc: adc@12D10000 {
compatible = "samsung,exynos-adc-v2";
reg = <0x12D10000 0x100>;
interrupts = <0 106 0>;
clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
hsi2c_8: i2c@12E00000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E00000 0x1000>;
interrupts = <0 87 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c8_hs_bus>;
clocks = <&clock CLK_USI4>;
clock-names = "hsi2c";
status = "disabled";
};
hsi2c_9: i2c@12E10000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E10000 0x1000>;
interrupts = <0 88 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c9_hs_bus>;
clocks = <&clock CLK_USI5>;
clock-names = "hsi2c";
status = "disabled";
};
hsi2c_10: i2c@12E20000 {
compatible = "samsung,exynos5250-hsi2c";
reg = <0x12E20000 0x1000>;
interrupts = <0 203 0>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c10_hs_bus>;
clocks = <&clock CLK_USI6>;
clock-names = "hsi2c";
status = "disabled";
};
hdmi: hdmi@14530000 {
compatible = "samsung,exynos5420-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
clocks = <&clock CLK_HDMI>, <&clock CLK_SCLK_HDMI>,
<&clock CLK_DOUT_PIXEL>, <&clock CLK_SCLK_HDMIPHY>,
<&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
phy = <&hdmiphy>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
power-domains = <&disp_pd>;
};
hdmiphy: hdmiphy@145D0000 {
reg = <0x145D0000 0x20>;
};
mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
interrupts = <0 94 0>;
clocks = <&clock CLK_MIXER>, <&clock CLK_HDMI>,
<&clock CLK_SCLK_HDMI>;
clock-names = "mixer", "hdmi", "sclk_hdmi";
power-domains = <&disp_pd>;
iommus = <&sysmmu_tv>;
};
rotator: rotator@11C00000 {
compatible = "samsung,exynos5250-rotator";
reg = <0x11C00000 0x64>;
interrupts = <0 84 0>;
clocks = <&clock CLK_ROTATOR>;
clock-names = "rotator";
iommus = <&sysmmu_rotator>;
};
gsc_0: video-scaler@13e00000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e00000 0x1000>;
interrupts = <0 85 0>;
clocks = <&clock CLK_GSCL0>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
iommus = <&sysmmu_gscl0>;
};
gsc_1: video-scaler@13e10000 {
compatible = "samsung,exynos5-gsc";
reg = <0x13e10000 0x1000>;
interrupts = <0 86 0>;
clocks = <&clock CLK_GSCL1>;
clock-names = "gscl";
power-domains = <&gsc_pd>;
iommus = <&sysmmu_gscl1>;
};
jpeg_0: jpeg@11F50000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F50000 0x1000>;
interrupts = <0 89 0>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG>;
iommus = <&sysmmu_jpeg0>;
};
jpeg_1: jpeg@11F60000 {
compatible = "samsung,exynos5420-jpeg";
reg = <0x11F60000 0x1000>;
interrupts = <0 168 0>;
clock-names = "jpeg";
clocks = <&clock CLK_JPEG2>;
iommus = <&sysmmu_jpeg1>;
};
pmu_system_controller: system-controller@10040000 {
compatible = "samsung,exynos5420-pmu", "syscon";
reg = <0x10040000 0x5000>;
clock-names = "clkout16";
clocks = <&clock CLK_FIN_PLL>;
#clock-cells = <1>;
interrupt-controller;
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
};
tmu_cpu0: tmu@10060000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10060000 0x100>;
interrupts = <0 65 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420 commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream. In Odroid XU3 Lite board, the temperature levels reported for thermal zone 0 were weird. In warm room: /sys/class/thermal/thermal_zone0/temp:32000 /sys/class/thermal/thermal_zone1/temp:51000 /sys/class/thermal/thermal_zone2/temp:55000 /sys/class/thermal/thermal_zone3/temp:54000 /sys/class/thermal/thermal_zone4/temp:51000 Sometimes after booting the value was even equal to ambient temperature which is highly unlikely to be a real temperature of sensor in SoC. The thermal sensor's calibration (trimming) is based on fused values. In case of the board above, the fused values are: 35, 52, 43, 58 and 43 (corresponding to each TMU device). However driver defined a minimum value for fused data as 40 and for smaller values it was using a hard-coded 55 instead. This lead to mapping data from sensor to wrong temperatures for thermal zone 0. Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10) do not impose any limits on fused values. Since we do not have any knowledge about these limits, use 0 as a minimum accepted fused value. This should essentially allow accepting any reasonable fused value thus behaving like vendor driver. The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing exynos4412 with one change - the samsung,tmu_min_efuse_value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-12 05:14:56 +09:00
#include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu1: tmu@10064000 {
compatible = "samsung,exynos5420-tmu";
reg = <0x10064000 0x100>;
interrupts = <0 183 0>;
clocks = <&clock CLK_TMU>;
clock-names = "tmu_apbif";
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420 commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream. In Odroid XU3 Lite board, the temperature levels reported for thermal zone 0 were weird. In warm room: /sys/class/thermal/thermal_zone0/temp:32000 /sys/class/thermal/thermal_zone1/temp:51000 /sys/class/thermal/thermal_zone2/temp:55000 /sys/class/thermal/thermal_zone3/temp:54000 /sys/class/thermal/thermal_zone4/temp:51000 Sometimes after booting the value was even equal to ambient temperature which is highly unlikely to be a real temperature of sensor in SoC. The thermal sensor's calibration (trimming) is based on fused values. In case of the board above, the fused values are: 35, 52, 43, 58 and 43 (corresponding to each TMU device). However driver defined a minimum value for fused data as 40 and for smaller values it was using a hard-coded 55 instead. This lead to mapping data from sensor to wrong temperatures for thermal zone 0. Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10) do not impose any limits on fused values. Since we do not have any knowledge about these limits, use 0 as a minimum accepted fused value. This should essentially allow accepting any reasonable fused value thus behaving like vendor driver. The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing exynos4412 with one change - the samsung,tmu_min_efuse_value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-12 05:14:56 +09:00
#include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu2: tmu@10068000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x10068000 0x100>, <0x1006c000 0x4>;
interrupts = <0 184 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420 commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream. In Odroid XU3 Lite board, the temperature levels reported for thermal zone 0 were weird. In warm room: /sys/class/thermal/thermal_zone0/temp:32000 /sys/class/thermal/thermal_zone1/temp:51000 /sys/class/thermal/thermal_zone2/temp:55000 /sys/class/thermal/thermal_zone3/temp:54000 /sys/class/thermal/thermal_zone4/temp:51000 Sometimes after booting the value was even equal to ambient temperature which is highly unlikely to be a real temperature of sensor in SoC. The thermal sensor's calibration (trimming) is based on fused values. In case of the board above, the fused values are: 35, 52, 43, 58 and 43 (corresponding to each TMU device). However driver defined a minimum value for fused data as 40 and for smaller values it was using a hard-coded 55 instead. This lead to mapping data from sensor to wrong temperatures for thermal zone 0. Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10) do not impose any limits on fused values. Since we do not have any knowledge about these limits, use 0 as a minimum accepted fused value. This should essentially allow accepting any reasonable fused value thus behaving like vendor driver. The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing exynos4412 with one change - the samsung,tmu_min_efuse_value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-12 05:14:56 +09:00
#include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_cpu3: tmu@1006c000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x1006c000 0x100>, <0x100a0000 0x4>;
interrupts = <0 185 0>;
clocks = <&clock CLK_TMU>, <&clock CLK_TMU_GPU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420 commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream. In Odroid XU3 Lite board, the temperature levels reported for thermal zone 0 were weird. In warm room: /sys/class/thermal/thermal_zone0/temp:32000 /sys/class/thermal/thermal_zone1/temp:51000 /sys/class/thermal/thermal_zone2/temp:55000 /sys/class/thermal/thermal_zone3/temp:54000 /sys/class/thermal/thermal_zone4/temp:51000 Sometimes after booting the value was even equal to ambient temperature which is highly unlikely to be a real temperature of sensor in SoC. The thermal sensor's calibration (trimming) is based on fused values. In case of the board above, the fused values are: 35, 52, 43, 58 and 43 (corresponding to each TMU device). However driver defined a minimum value for fused data as 40 and for smaller values it was using a hard-coded 55 instead. This lead to mapping data from sensor to wrong temperatures for thermal zone 0. Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10) do not impose any limits on fused values. Since we do not have any knowledge about these limits, use 0 as a minimum accepted fused value. This should essentially allow accepting any reasonable fused value thus behaving like vendor driver. The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing exynos4412 with one change - the samsung,tmu_min_efuse_value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-12 05:14:56 +09:00
#include "exynos5420-tmu-sensor-conf.dtsi"
};
tmu_gpu: tmu@100a0000 {
compatible = "samsung,exynos5420-tmu-ext-triminfo";
reg = <0x100a0000 0x100>, <0x10068000 0x4>;
interrupts = <0 215 0>;
clocks = <&clock CLK_TMU_GPU>, <&clock CLK_TMU>;
clock-names = "tmu_apbif", "tmu_triminfo_apbif";
ARM: dts: exynos: Do not ignore real-world fuse values for thermal zone 0 on Exynos5420 commit 28928a3ce142b2e4e5a7a0f067cefb41a3d2c3f9 upstream. In Odroid XU3 Lite board, the temperature levels reported for thermal zone 0 were weird. In warm room: /sys/class/thermal/thermal_zone0/temp:32000 /sys/class/thermal/thermal_zone1/temp:51000 /sys/class/thermal/thermal_zone2/temp:55000 /sys/class/thermal/thermal_zone3/temp:54000 /sys/class/thermal/thermal_zone4/temp:51000 Sometimes after booting the value was even equal to ambient temperature which is highly unlikely to be a real temperature of sensor in SoC. The thermal sensor's calibration (trimming) is based on fused values. In case of the board above, the fused values are: 35, 52, 43, 58 and 43 (corresponding to each TMU device). However driver defined a minimum value for fused data as 40 and for smaller values it was using a hard-coded 55 instead. This lead to mapping data from sensor to wrong temperatures for thermal zone 0. Various vendor 3.10 trees (Hardkernel's based on Samsung LSI, Artik 10) do not impose any limits on fused values. Since we do not have any knowledge about these limits, use 0 as a minimum accepted fused value. This should essentially allow accepting any reasonable fused value thus behaving like vendor driver. The exynos5420-tmu-sensor-conf.dtsi is copied directly from existing exynos4412 with one change - the samsung,tmu_min_efuse_value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Tested-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Anand Moon <linux.amoon@gmail.com> Tested-by: Anand Moon <linux.amoon@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-12 05:14:56 +09:00
#include "exynos5420-tmu-sensor-conf.dtsi"
};
sysmmu_g2dr: sysmmu@0x10A60000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A60000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <24 5>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
#iommu-cells = <0>;
};
sysmmu_g2dw: sysmmu@0x10A70000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x10A70000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <22 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_G2D>, <&clock CLK_G2D>;
#iommu-cells = <0>;
};
sysmmu_tv: sysmmu@0x14650000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14650000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <7 4>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MIXER>, <&clock CLK_MIXER>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};
sysmmu_gscl0: sysmmu@0x13E80000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E80000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <2 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_GSCL0>, <&clock CLK_GSCL0>;
power-domains = <&gsc_pd>;
#iommu-cells = <0>;
};
sysmmu_gscl1: sysmmu@0x13E90000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x13E90000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <2 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_GSCL1>, <&clock CLK_GSCL1>;
power-domains = <&gsc_pd>;
#iommu-cells = <0>;
};
sysmmu_scaler0r: sysmmu@0x12880000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12880000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <22 4>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
#iommu-cells = <0>;
};
sysmmu_scaler1r: sysmmu@0x12890000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x12890000 0x1000>;
interrupts = <0 186 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
#iommu-cells = <0>;
};
sysmmu_scaler2r: sysmmu@0x128A0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128A0000 0x1000>;
interrupts = <0 188 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
#iommu-cells = <0>;
};
sysmmu_scaler0w: sysmmu@0x128C0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128C0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <27 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL0>, <&clock CLK_MSCL0>;
#iommu-cells = <0>;
};
sysmmu_scaler1w: sysmmu@0x128D0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128D0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <22 6>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL1>, <&clock CLK_MSCL1>;
#iommu-cells = <0>;
};
sysmmu_scaler2w: sysmmu@0x128E0000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x128E0000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <19 6>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MSCL2>, <&clock CLK_MSCL2>;
#iommu-cells = <0>;
};
sysmmu_rotator: sysmmu@0x11D40000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11D40000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <4 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_ROTATOR>, <&clock CLK_ROTATOR>;
#iommu-cells = <0>;
};
sysmmu_jpeg0: sysmmu@0x11F10000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F10000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <4 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_JPEG>, <&clock CLK_JPEG>;
#iommu-cells = <0>;
};
sysmmu_jpeg1: sysmmu@0x11F20000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11F20000 0x1000>;
interrupts = <0 169 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_JPEG2>, <&clock CLK_JPEG2>;
#iommu-cells = <0>;
};
sysmmu_mfc_l: sysmmu@0x11200000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11200000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <6 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MFCL>, <&clock CLK_MFC>;
power-domains = <&mfc_pd>;
#iommu-cells = <0>;
};
sysmmu_mfc_r: sysmmu@0x11210000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x11210000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <8 5>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_MFCR>, <&clock CLK_MFC>;
power-domains = <&mfc_pd>;
#iommu-cells = <0>;
};
sysmmu_fimd1_0: sysmmu@0x14640000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14640000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <3 2>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_FIMD1M0>, <&clock CLK_FIMD1>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};
sysmmu_fimd1_1: sysmmu@0x14680000 {
compatible = "samsung,exynos-sysmmu";
reg = <0x14680000 0x1000>;
interrupt-parent = <&combiner>;
interrupts = <3 0>;
clock-names = "sysmmu", "master";
clocks = <&clock CLK_SMMU_FIMD1M1>, <&clock CLK_FIMD1>;
power-domains = <&disp_pd>;
#iommu-cells = <0>;
};
bus_wcore: bus_wcore {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_WCORE>;
clock-names = "bus";
operating-points-v2 = <&bus_wcore_opp_table>;
status = "disabled";
};
bus_noc: bus_noc {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK100_NOC>;
clock-names = "bus";
operating-points-v2 = <&bus_noc_opp_table>;
status = "disabled";
};
bus_fsys_apb: bus_fsys_apb {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_PCLK200_FSYS>;
clock-names = "bus";
operating-points-v2 = <&bus_fsys_apb_opp_table>;
status = "disabled";
};
bus_fsys: bus_fsys {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS>;
clock-names = "bus";
operating-points-v2 = <&bus_fsys_apb_opp_table>;
status = "disabled";
};
bus_fsys2: bus_fsys2 {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK200_FSYS2>;
clock-names = "bus";
operating-points-v2 = <&bus_fsys2_opp_table>;
status = "disabled";
};
bus_mfc: bus_mfc {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK333>;
clock-names = "bus";
operating-points-v2 = <&bus_mfc_opp_table>;
status = "disabled";
};
bus_gen: bus_gen {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK266>;
clock-names = "bus";
operating-points-v2 = <&bus_gen_opp_table>;
status = "disabled";
};
bus_peri: bus_peri {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK66>;
clock-names = "bus";
operating-points-v2 = <&bus_peri_opp_table>;
status = "disabled";
};
bus_g2d: bus_g2d {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK333_G2D>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_opp_table>;
status = "disabled";
};
bus_g2d_acp: bus_g2d_acp {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK266_G2D>;
clock-names = "bus";
operating-points-v2 = <&bus_g2d_acp_opp_table>;
status = "disabled";
};
bus_jpeg: bus_jpeg {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_JPEG>;
clock-names = "bus";
operating-points-v2 = <&bus_jpeg_opp_table>;
status = "disabled";
};
bus_jpeg_apb: bus_jpeg_apb {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK166>;
clock-names = "bus";
operating-points-v2 = <&bus_jpeg_apb_opp_table>;
status = "disabled";
};
bus_disp1_fimd: bus_disp1_fimd {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_DISP1>;
clock-names = "bus";
operating-points-v2 = <&bus_disp1_fimd_opp_table>;
status = "disabled";
};
bus_disp1: bus_disp1 {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_DISP1>;
clock-names = "bus";
operating-points-v2 = <&bus_disp1_opp_table>;
status = "disabled";
};
bus_gscl_scaler: bus_gscl_scaler {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK300_GSCL>;
clock-names = "bus";
operating-points-v2 = <&bus_gscl_opp_table>;
status = "disabled";
};
bus_mscl: bus_mscl {
compatible = "samsung,exynos-bus";
clocks = <&clock CLK_DOUT_ACLK400_MSCL>;
clock-names = "bus";
operating-points-v2 = <&bus_mscl_opp_table>;
status = "disabled";
};
bus_wcore_opp_table: opp_table2 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <84000000>;
opp-microvolt = <925000>;
};
opp01 {
opp-hz = /bits/ 64 <111000000>;
opp-microvolt = <950000>;
};
opp02 {
opp-hz = /bits/ 64 <222000000>;
opp-microvolt = <950000>;
};
opp03 {
opp-hz = /bits/ 64 <333000000>;
opp-microvolt = <950000>;
};
opp04 {
opp-hz = /bits/ 64 <400000000>;
opp-microvolt = <987500>;
};
};
bus_noc_opp_table: opp_table3 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <67000000>;
};
opp01 {
opp-hz = /bits/ 64 <75000000>;
};
opp02 {
opp-hz = /bits/ 64 <86000000>;
};
opp03 {
opp-hz = /bits/ 64 <100000000>;
};
};
bus_fsys_apb_opp_table: opp_table4 {
compatible = "operating-points-v2";
opp-shared;
opp00 {
opp-hz = /bits/ 64 <100000000>;
};
opp01 {
opp-hz = /bits/ 64 <200000000>;
};
};
bus_fsys2_opp_table: opp_table5 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <75000000>;
};
opp01 {
opp-hz = /bits/ 64 <100000000>;
};
opp02 {
opp-hz = /bits/ 64 <150000000>;
};
};
bus_mfc_opp_table: opp_table6 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <96000000>;
};
opp01 {
opp-hz = /bits/ 64 <111000000>;
};
opp02 {
opp-hz = /bits/ 64 <167000000>;
};
opp03 {
opp-hz = /bits/ 64 <222000000>;
};
opp04 {
opp-hz = /bits/ 64 <333000000>;
};
};
bus_gen_opp_table: opp_table7 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <89000000>;
};
opp01 {
opp-hz = /bits/ 64 <133000000>;
};
opp02 {
opp-hz = /bits/ 64 <178000000>;
};
opp03 {
opp-hz = /bits/ 64 <267000000>;
};
};
bus_peri_opp_table: opp_table8 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <67000000>;
};
};
bus_g2d_opp_table: opp_table9 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <84000000>;
};
opp01 {
opp-hz = /bits/ 64 <167000000>;
};
opp02 {
opp-hz = /bits/ 64 <222000000>;
};
opp03 {
opp-hz = /bits/ 64 <300000000>;
};
opp04 {
opp-hz = /bits/ 64 <333000000>;
};
};
bus_g2d_acp_opp_table: opp_table10 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <67000000>;
};
opp01 {
opp-hz = /bits/ 64 <133000000>;
};
opp02 {
opp-hz = /bits/ 64 <178000000>;
};
opp03 {
opp-hz = /bits/ 64 <267000000>;
};
};
bus_jpeg_opp_table: opp_table11 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <75000000>;
};
opp01 {
opp-hz = /bits/ 64 <150000000>;
};
opp02 {
opp-hz = /bits/ 64 <200000000>;
};
opp03 {
opp-hz = /bits/ 64 <300000000>;
};
};
bus_jpeg_apb_opp_table: opp_table12 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <84000000>;
};
opp01 {
opp-hz = /bits/ 64 <111000000>;
};
opp02 {
opp-hz = /bits/ 64 <134000000>;
};
opp03 {
opp-hz = /bits/ 64 <167000000>;
};
};
bus_disp1_fimd_opp_table: opp_table13 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <120000000>;
};
opp01 {
opp-hz = /bits/ 64 <200000000>;
};
};
bus_disp1_opp_table: opp_table14 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <120000000>;
};
opp01 {
opp-hz = /bits/ 64 <200000000>;
};
opp02 {
opp-hz = /bits/ 64 <300000000>;
};
};
bus_gscl_opp_table: opp_table15 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <150000000>;
};
opp01 {
opp-hz = /bits/ 64 <200000000>;
};
opp02 {
opp-hz = /bits/ 64 <300000000>;
};
};
bus_mscl_opp_table: opp_table16 {
compatible = "operating-points-v2";
opp00 {
opp-hz = /bits/ 64 <84000000>;
};
opp01 {
opp-hz = /bits/ 64 <167000000>;
};
opp02 {
opp-hz = /bits/ 64 <222000000>;
};
opp03 {
opp-hz = /bits/ 64 <333000000>;
};
opp04 {
opp-hz = /bits/ 64 <400000000>;
};
};
};
thermal-zones {
cpu0_thermal: cpu0-thermal {
thermal-sensors = <&tmu_cpu0>;
#include "exynos5420-trip-points.dtsi"
};
cpu1_thermal: cpu1-thermal {
thermal-sensors = <&tmu_cpu1>;
#include "exynos5420-trip-points.dtsi"
};
cpu2_thermal: cpu2-thermal {
thermal-sensors = <&tmu_cpu2>;
#include "exynos5420-trip-points.dtsi"
};
cpu3_thermal: cpu3-thermal {
thermal-sensors = <&tmu_cpu3>;
#include "exynos5420-trip-points.dtsi"
};
gpu_thermal: gpu-thermal {
thermal-sensors = <&tmu_gpu>;
#include "exynos5420-trip-points.dtsi"
};
};
};
&dp {
clocks = <&clock CLK_DP1>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
power-domains = <&disp_pd>;
};
&fimd {
compatible = "samsung,exynos5420-fimd";
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
power-domains = <&disp_pd>;
iommus = <&sysmmu_fimd1_0>, <&sysmmu_fimd1_1>;
iommu-names = "m0", "m1";
};
&i2c_0 {
clocks = <&clock CLK_I2C0>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
};
&i2c_1 {
clocks = <&clock CLK_I2C1>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
};
&i2c_2 {
clocks = <&clock CLK_I2C2>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
};
&i2c_3 {
clocks = <&clock CLK_I2C3>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
};
&hsi2c_4 {
clocks = <&clock CLK_USI0>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c4_hs_bus>;
};
&hsi2c_5 {
clocks = <&clock CLK_USI1>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c5_hs_bus>;
};
&hsi2c_6 {
clocks = <&clock CLK_USI2>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c6_hs_bus>;
};
&hsi2c_7 {
clocks = <&clock CLK_USI3>;
clock-names = "hsi2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c7_hs_bus>;
};
&mct {
clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
clock-names = "fin_pll", "mct";
};
&pwm {
clocks = <&clock CLK_PWM>;
clock-names = "timers";
};
&rtc {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
interrupt-parent = <&pmu_system_controller>;
status = "disabled";
};
&serial_0 {
clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
clock-names = "uart", "clk_uart_baud0";
};
&serial_1 {
clocks = <&clock CLK_UART1>, <&clock CLK_SCLK_UART1>;
clock-names = "uart", "clk_uart_baud0";
};
&serial_2 {
clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
clock-names = "uart", "clk_uart_baud0";
};
&serial_3 {
clocks = <&clock CLK_UART3>, <&clock CLK_SCLK_UART3>;
clock-names = "uart", "clk_uart_baud0";
};
&sss {
clocks = <&clock CLK_SSS>;
clock-names = "secss";
};
&usbdrd3_0 {
clocks = <&clock CLK_USBD300>;
clock-names = "usbdrd30";
};
&usbdrd_phy0 {
clocks = <&clock CLK_USBD300>, <&clock CLK_SCLK_USBPHY300>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
};
&usbdrd3_1 {
clocks = <&clock CLK_USBD301>;
clock-names = "usbdrd30";
};
&usbdrd_dwc3_1 {
interrupts = <GIC_SPI 73 0>;
};
&usbdrd_phy1 {
clocks = <&clock CLK_USBD301>, <&clock CLK_SCLK_USBPHY301>;
clock-names = "phy", "ref";
samsung,pmu-syscon = <&pmu_system_controller>;
};
&usbhost1 {
clocks = <&clock CLK_USBH20>;
clock-names = "usbhost";
};
&usbhost2 {
clocks = <&clock CLK_USBH20>;
clock-names = "usbhost";
};
&usb2_phy {
clocks = <&clock CLK_USBH20>, <&clock CLK_SCLK_USBPHY300>;
clock-names = "phy", "ref";
samsung,sysreg-phandle = <&sysreg_system_controller>;
samsung,pmureg-phandle = <&pmu_system_controller>;
};
&watchdog {
clocks = <&clock CLK_WDT>;
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
};
#include "exynos5420-pinctrl.dtsi"