License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 23:07:57 +09:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0 */
|
2005-04-17 07:20:36 +09:00
|
|
|
/*
|
|
|
|
|
* This file define a set of standard wireless extensions
|
|
|
|
|
*
|
2007-03-23 09:31:16 +09:00
|
|
|
* Version : 22 16.3.07
|
2005-04-17 07:20:36 +09:00
|
|
|
*
|
|
|
|
|
* Authors : Jean Tourrilhes - HPL - <jt@hpl.hp.com>
|
2007-03-23 09:31:16 +09:00
|
|
|
* Copyright (c) 1997-2007 Jean Tourrilhes, All Rights Reserved.
|
2005-04-17 07:20:36 +09:00
|
|
|
*/
|
|
|
|
|
#ifndef _LINUX_WIRELESS_H
|
|
|
|
|
#define _LINUX_WIRELESS_H
|
|
|
|
|
|
2012-10-13 18:46:48 +09:00
|
|
|
#include <uapi/linux/wireless.h>
|
2005-04-17 07:20:36 +09:00
|
|
|
|
2008-06-04 01:14:03 +09:00
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
|
|
|
|
|
|
#include <linux/compat.h>
|
|
|
|
|
|
|
|
|
|
struct compat_iw_point {
|
|
|
|
|
compat_caddr_t pointer;
|
|
|
|
|
__u16 length;
|
|
|
|
|
__u16 flags;
|
|
|
|
|
};
|
|
|
|
|
#endif
|
2008-06-17 10:50:49 +09:00
|
|
|
#ifdef CONFIG_COMPAT
|
|
|
|
|
struct __compat_iw_event {
|
|
|
|
|
__u16 len; /* Real length of this stuff */
|
|
|
|
|
__u16 cmd; /* Wireless IOCTL */
|
|
|
|
|
compat_caddr_t pointer;
|
|
|
|
|
};
|
|
|
|
|
#define IW_EV_COMPAT_LCP_LEN offsetof(struct __compat_iw_event, pointer)
|
|
|
|
|
#define IW_EV_COMPAT_POINT_OFF offsetof(struct compat_iw_point, length)
|
net/compat/wext: send different messages to compat tasks
Wireless extensions have the unfortunate problem that events
are multicast netlink messages, and are not independent of
pointer size. Thus, currently 32-bit tasks on 64-bit platforms
cannot properly receive events and fail with all kinds of
strange problems, for instance wpa_supplicant never notices
disassociations, due to the way the 64-bit event looks (to a
32-bit process), the fact that the address is all zeroes is
lost, it thinks instead it is 00:00:00:00:01:00.
The same problem existed with the ioctls, until David Miller
fixed those some time ago in an heroic effort.
A different problem caused by this is that we cannot send the
ASSOCREQIE/ASSOCRESPIE events because sending them causes a
32-bit wpa_supplicant on a 64-bit system to overwrite its
internal information, which is worse than it not getting the
information at all -- so we currently resort to sending a
custom string event that it then parses. This, however, has a
severe size limitation we are frequently hitting with modern
access points; this limitation would can be lifted after this
patch by sending the correct binary, not custom, event.
A similar problem apparently happens for some other netlink
users on x86_64 with 32-bit tasks due to the alignment for
64-bit quantities.
In order to fix these problems, I have implemented a way to
send compat messages to tasks. When sending an event, we send
the non-compat event data together with a compat event data in
skb_shinfo(main_skb)->frag_list. Then, when the event is read
from the socket, the netlink code makes sure to pass out only
the skb that is compatible with the task. This approach was
suggested by David Miller, my original approach required
always sending two skbs but that had various small problems.
To determine whether compat is needed or not, I have used the
MSG_CMSG_COMPAT flag, and adjusted the call path for recv and
recvfrom to include it, even if those calls do not have a cmsg
parameter.
I have not solved one small part of the problem, and I don't
think it is necessary to: if a 32-bit application uses read()
rather than any form of recvmsg() it will still get the wrong
(64-bit) event. However, neither do applications actually do
this, nor would it be a regression.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-01 20:26:02 +09:00
|
|
|
|
|
|
|
|
/* Size of the various events for compat */
|
|
|
|
|
#define IW_EV_COMPAT_CHAR_LEN (IW_EV_COMPAT_LCP_LEN + IFNAMSIZ)
|
|
|
|
|
#define IW_EV_COMPAT_UINT_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(__u32))
|
|
|
|
|
#define IW_EV_COMPAT_FREQ_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_freq))
|
|
|
|
|
#define IW_EV_COMPAT_PARAM_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_param))
|
|
|
|
|
#define IW_EV_COMPAT_ADDR_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct sockaddr))
|
|
|
|
|
#define IW_EV_COMPAT_QUAL_LEN (IW_EV_COMPAT_LCP_LEN + sizeof(struct iw_quality))
|
2008-06-17 10:50:49 +09:00
|
|
|
#define IW_EV_COMPAT_POINT_LEN \
|
|
|
|
|
(IW_EV_COMPAT_LCP_LEN + sizeof(struct compat_iw_point) - \
|
|
|
|
|
IW_EV_COMPAT_POINT_OFF)
|
|
|
|
|
#endif
|
2005-04-17 07:20:36 +09:00
|
|
|
#endif /* _LINUX_WIRELESS_H */
|