linux-brain/drivers/parport/parport_ax88796.c

419 lines
9.1 KiB
C
Raw Permalink Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/* linux/drivers/parport/parport_ax88796.c
*
* (c) 2005,2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/parport.h>
#include <linux/interrupt.h>
#include <linux/errno.h>
#include <linux/platform_device.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 17:04:11 +09:00
#include <linux/slab.h>
#include <asm/io.h>
#include <asm/irq.h>
#define AX_SPR_BUSY (1<<7)
#define AX_SPR_ACK (1<<6)
#define AX_SPR_PE (1<<5)
#define AX_SPR_SLCT (1<<4)
#define AX_SPR_ERR (1<<3)
#define AX_CPR_nDOE (1<<5)
#define AX_CPR_SLCTIN (1<<3)
#define AX_CPR_nINIT (1<<2)
#define AX_CPR_ATFD (1<<1)
#define AX_CPR_STRB (1<<0)
struct ax_drvdata {
struct parport *parport;
struct parport_state suspend;
struct device *dev;
struct resource *io;
unsigned char irq_enabled;
void __iomem *base;
void __iomem *spp_data;
void __iomem *spp_spr;
void __iomem *spp_cpr;
};
static inline struct ax_drvdata *pp_to_drv(struct parport *p)
{
return p->private_data;
}
static unsigned char
parport_ax88796_read_data(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
return readb(dd->spp_data);
}
static void
parport_ax88796_write_data(struct parport *p, unsigned char data)
{
struct ax_drvdata *dd = pp_to_drv(p);
writeb(data, dd->spp_data);
}
static unsigned char
parport_ax88796_read_control(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned int cpr = readb(dd->spp_cpr);
unsigned int ret = 0;
if (!(cpr & AX_CPR_STRB))
ret |= PARPORT_CONTROL_STROBE;
if (!(cpr & AX_CPR_ATFD))
ret |= PARPORT_CONTROL_AUTOFD;
if (cpr & AX_CPR_nINIT)
ret |= PARPORT_CONTROL_INIT;
if (!(cpr & AX_CPR_SLCTIN))
ret |= PARPORT_CONTROL_SELECT;
return ret;
}
static void
parport_ax88796_write_control(struct parport *p, unsigned char control)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned int cpr = readb(dd->spp_cpr);
cpr &= AX_CPR_nDOE;
if (!(control & PARPORT_CONTROL_STROBE))
cpr |= AX_CPR_STRB;
if (!(control & PARPORT_CONTROL_AUTOFD))
cpr |= AX_CPR_ATFD;
if (control & PARPORT_CONTROL_INIT)
cpr |= AX_CPR_nINIT;
if (!(control & PARPORT_CONTROL_SELECT))
cpr |= AX_CPR_SLCTIN;
dev_dbg(dd->dev, "write_control: ctrl=%02x, cpr=%02x\n", control, cpr);
writeb(cpr, dd->spp_cpr);
if (parport_ax88796_read_control(p) != control) {
dev_err(dd->dev, "write_control: read != set (%02x, %02x)\n",
parport_ax88796_read_control(p), control);
}
}
static unsigned char
parport_ax88796_read_status(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned int status = readb(dd->spp_spr);
unsigned int ret = 0;
if (status & AX_SPR_BUSY)
ret |= PARPORT_STATUS_BUSY;
if (status & AX_SPR_ACK)
ret |= PARPORT_STATUS_ACK;
if (status & AX_SPR_ERR)
ret |= PARPORT_STATUS_ERROR;
if (status & AX_SPR_SLCT)
ret |= PARPORT_STATUS_SELECT;
if (status & AX_SPR_PE)
ret |= PARPORT_STATUS_PAPEROUT;
return ret;
}
static unsigned char
parport_ax88796_frob_control(struct parport *p, unsigned char mask,
unsigned char val)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned char old = parport_ax88796_read_control(p);
dev_dbg(dd->dev, "frob: mask=%02x, val=%02x, old=%02x\n",
mask, val, old);
parport_ax88796_write_control(p, (old & ~mask) | val);
return old;
}
static void
parport_ax88796_enable_irq(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned long flags;
local_irq_save(flags);
if (!dd->irq_enabled) {
enable_irq(p->irq);
dd->irq_enabled = 1;
}
local_irq_restore(flags);
}
static void
parport_ax88796_disable_irq(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
unsigned long flags;
local_irq_save(flags);
if (dd->irq_enabled) {
disable_irq(p->irq);
dd->irq_enabled = 0;
}
local_irq_restore(flags);
}
static void
parport_ax88796_data_forward(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
void __iomem *cpr = dd->spp_cpr;
writeb((readb(cpr) & ~AX_CPR_nDOE), cpr);
}
static void
parport_ax88796_data_reverse(struct parport *p)
{
struct ax_drvdata *dd = pp_to_drv(p);
void __iomem *cpr = dd->spp_cpr;
writeb(readb(cpr) | AX_CPR_nDOE, cpr);
}
static void
parport_ax88796_init_state(struct pardevice *d, struct parport_state *s)
{
struct ax_drvdata *dd = pp_to_drv(d->port);
memset(s, 0, sizeof(struct parport_state));
dev_dbg(dd->dev, "init_state: %p: state=%p\n", d, s);
s->u.ax88796.cpr = readb(dd->spp_cpr);
}
static void
parport_ax88796_save_state(struct parport *p, struct parport_state *s)
{
struct ax_drvdata *dd = pp_to_drv(p);
dev_dbg(dd->dev, "save_state: %p: state=%p\n", p, s);
s->u.ax88796.cpr = readb(dd->spp_cpr);
}
static void
parport_ax88796_restore_state(struct parport *p, struct parport_state *s)
{
struct ax_drvdata *dd = pp_to_drv(p);
dev_dbg(dd->dev, "restore_state: %p: state=%p\n", p, s);
writeb(s->u.ax88796.cpr, dd->spp_cpr);
}
static struct parport_operations parport_ax88796_ops = {
.write_data = parport_ax88796_write_data,
.read_data = parport_ax88796_read_data,
.write_control = parport_ax88796_write_control,
.read_control = parport_ax88796_read_control,
.frob_control = parport_ax88796_frob_control,
.read_status = parport_ax88796_read_status,
.enable_irq = parport_ax88796_enable_irq,
.disable_irq = parport_ax88796_disable_irq,
.data_forward = parport_ax88796_data_forward,
.data_reverse = parport_ax88796_data_reverse,
.init_state = parport_ax88796_init_state,
.save_state = parport_ax88796_save_state,
.restore_state = parport_ax88796_restore_state,
.epp_write_data = parport_ieee1284_epp_write_data,
.epp_read_data = parport_ieee1284_epp_read_data,
.epp_write_addr = parport_ieee1284_epp_write_addr,
.epp_read_addr = parport_ieee1284_epp_read_addr,
.ecp_write_data = parport_ieee1284_ecp_write_data,
.ecp_read_data = parport_ieee1284_ecp_read_data,
.ecp_write_addr = parport_ieee1284_ecp_write_addr,
.compat_write_data = parport_ieee1284_write_compat,
.nibble_read_data = parport_ieee1284_read_nibble,
.byte_read_data = parport_ieee1284_read_byte,
.owner = THIS_MODULE,
};
static int parport_ax88796_probe(struct platform_device *pdev)
{
struct device *_dev = &pdev->dev;
struct ax_drvdata *dd;
struct parport *pp;
struct resource *res;
unsigned long size;
int spacing;
int irq;
int ret;
dd = kzalloc(sizeof(*dd), GFP_KERNEL);
if (!dd)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res == NULL) {
dev_err(_dev, "no MEM specified\n");
ret = -ENXIO;
goto exit_mem;
}
size = resource_size(res);
spacing = size / 3;
dd->io = request_mem_region(res->start, size, pdev->name);
if (dd->io == NULL) {
dev_err(_dev, "cannot reserve memory\n");
ret = -ENXIO;
goto exit_mem;
}
dd->base = ioremap(res->start, size);
if (dd->base == NULL) {
dev_err(_dev, "cannot ioremap region\n");
ret = -ENXIO;
goto exit_res;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0)
irq = PARPORT_IRQ_NONE;
pp = parport_register_port((unsigned long)dd->base, irq,
PARPORT_DMA_NONE,
&parport_ax88796_ops);
if (pp == NULL) {
dev_err(_dev, "failed to register parallel port\n");
ret = -ENOMEM;
goto exit_unmap;
}
pp->private_data = dd;
dd->parport = pp;
dd->dev = _dev;
dd->spp_data = dd->base;
dd->spp_spr = dd->base + (spacing * 1);
dd->spp_cpr = dd->base + (spacing * 2);
/* initialise the port controls */
writeb(AX_CPR_STRB, dd->spp_cpr);
if (irq >= 0) {
/* request irq */
ret = request_irq(irq, parport_irq_handler,
IRQF_TRIGGER_FALLING, pdev->name, pp);
if (ret < 0)
goto exit_port;
dd->irq_enabled = 1;
}
platform_set_drvdata(pdev, pp);
dev_info(_dev, "attached parallel port driver\n");
parport_announce_port(pp);
return 0;
exit_port:
parport_remove_port(pp);
exit_unmap:
iounmap(dd->base);
exit_res:
release_mem_region(dd->io->start, size);
exit_mem:
kfree(dd);
return ret;
}
static int parport_ax88796_remove(struct platform_device *pdev)
{
struct parport *p = platform_get_drvdata(pdev);
struct ax_drvdata *dd = pp_to_drv(p);
free_irq(p->irq, p);
parport_remove_port(p);
iounmap(dd->base);
release_mem_region(dd->io->start, resource_size(dd->io));
kfree(dd);
return 0;
}
#ifdef CONFIG_PM
static int parport_ax88796_suspend(struct platform_device *dev,
pm_message_t state)
{
struct parport *p = platform_get_drvdata(dev);
struct ax_drvdata *dd = pp_to_drv(p);
parport_ax88796_save_state(p, &dd->suspend);
writeb(AX_CPR_nDOE | AX_CPR_STRB, dd->spp_cpr);
return 0;
}
static int parport_ax88796_resume(struct platform_device *dev)
{
struct parport *p = platform_get_drvdata(dev);
struct ax_drvdata *dd = pp_to_drv(p);
parport_ax88796_restore_state(p, &dd->suspend);
return 0;
}
#else
#define parport_ax88796_suspend NULL
#define parport_ax88796_resume NULL
#endif
MODULE_ALIAS("platform:ax88796-pp");
static struct platform_driver axdrv = {
.driver = {
.name = "ax88796-pp",
},
.probe = parport_ax88796_probe,
.remove = parport_ax88796_remove,
.suspend = parport_ax88796_suspend,
.resume = parport_ax88796_resume,
};
module_platform_driver(axdrv);
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_DESCRIPTION("AX88796 Parport parallel port driver");
MODULE_LICENSE("GPL");