#!/bin/sh # Part of raspi-config https://github.com/RPi-Distro/raspi-config # # See LICENSE file for copyright and license details INTERACTIVE=True ASK_TO_REBOOT=0 BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf CONFIG=/boot/config.txt is_pi () { grep -q "^model name\s*:\s*ARMv" /proc/cpuinfo return $? } if is_pi ; then CMDLINE=/boot/cmdline.txt else CMDLINE=/proc/cmdline fi is_pione() { if grep -q "^Revision\s*:\s*00[0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo; then return 0 elif grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[0-36][0-9a-fA-F]$" /proc/cpuinfo ; then return 0 else return 1 fi } is_pitwo() { grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]04[0-9a-fA-F]$" /proc/cpuinfo return $? } is_pizero() { grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[9cC][0-9a-fA-F]$" /proc/cpuinfo return $? } get_pi_type() { if is_pione; then echo 1 elif is_pitwo; then echo 2 else echo 0 fi } is_live() { grep -q "boot=live" $CMDLINE return $? } is_ssh() { if pstree -p | egrep --quiet --extended-regexp ".*sshd.*\($$\)"; then return 0 else return 1 fi } get_init_sys() { if command -v systemctl > /dev/null && systemctl | grep -q '\-\.mount'; then SYSTEMD=1 elif [ -f /etc/init.d/cron ] && [ ! -h /etc/init.d/cron ]; then SYSTEMD=0 else echo "Unrecognised init system" return 1 fi } calc_wt_size() { # NOTE: it's tempting to redirect stderr to /dev/null, so supress error # output from tput. However in this case, tput detects neither stdout or # stderr is a tty and so only gives default 80, 24 values WT_HEIGHT=17 WT_WIDTH=$(tput cols) if [ -z "$WT_WIDTH" ] || [ "$WT_WIDTH" -lt 60 ]; then WT_WIDTH=80 fi if [ "$WT_WIDTH" -gt 178 ]; then WT_WIDTH=120 fi WT_MENU_HEIGHT=$(($WT_HEIGHT-7)) } do_about() { whiptail --msgbox "\ This tool provides a straight-forward way of doing initial configuration of the Raspberry Pi. Although it can be run at any time, some of the options may have difficulties if you have heavily customised your installation.\ " 20 70 1 } get_can_expand() { get_init_sys if [ $SYSTEMD -eq 1 ]; then ROOT_PART=$(mount | sed -n 's|^/dev/\(.*\) on / .*|\1|p') else if ! [ -h /dev/root ]; then echo 1 exit fi ROOT_PART=$(readlink /dev/root) fi PART_NUM=${ROOT_PART#mmcblk0p} if [ "$PART_NUM" = "$ROOT_PART" ]; then echo 1 exit fi if [ "$PART_NUM" -ne 2 ]; then echo 1 exit fi LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:) if [ $LAST_PART_NUM -ne $PART_NUM ]; then echo 1 exit fi echo 0 } do_expand_rootfs() { get_init_sys if [ $SYSTEMD -eq 1 ]; then ROOT_PART=$(mount | sed -n 's|^/dev/\(.*\) on / .*|\1|p') else if ! [ -h /dev/root ]; then whiptail --msgbox "/dev/root does not exist or is not a symlink. Don't know how to expand" 20 60 2 return 0 fi ROOT_PART=$(readlink /dev/root) fi PART_NUM=${ROOT_PART#mmcblk0p} if [ "$PART_NUM" = "$ROOT_PART" ]; then whiptail --msgbox "$ROOT_PART is not an SD card. Don't know how to expand" 20 60 2 return 0 fi # NOTE: the NOOBS partition layout confuses parted. For now, let's only # agree to work with a sufficiently simple partition layout if [ "$PART_NUM" -ne 2 ]; then whiptail --msgbox "Your partition layout is not currently supported by this tool. You are probably using NOOBS, in which case your root filesystem is already expanded anyway." 20 60 2 return 0 fi LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:) if [ $LAST_PART_NUM -ne $PART_NUM ]; then whiptail --msgbox "$ROOT_PART is not the last partition. Don't know how to expand" 20 60 2 return 0 fi # Get the starting offset of the root partition PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^${PART_NUM}" | cut -f 2 -d: | sed 's/[^0-9]//g') [ "$PART_START" ] || return 1 # Return value will likely be error for fdisk as it fails to reload the # partition table because the root fs is mounted fdisk /dev/mmcblk0 < /etc/init.d/resize2fs_once && #!/bin/sh ### BEGIN INIT INFO # Provides: resize2fs_once # Required-Start: # Required-Stop: # Default-Start: 3 # Default-Stop: # Short-Description: Resize the root filesystem to fill partition # Description: ### END INIT INFO . /lib/lsb/init-functions case "\$1" in start) log_daemon_msg "Starting resize2fs_once" && resize2fs /dev/$ROOT_PART && update-rc.d resize2fs_once remove && rm /etc/init.d/resize2fs_once && log_end_msg \$? ;; *) echo "Usage: \$0 start" >&2 exit 3 ;; esac EOF chmod +x /etc/init.d/resize2fs_once && update-rc.d resize2fs_once defaults && if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Root partition has been resized.\nThe filesystem will be enlarged upon the next reboot" 20 60 2 fi } set_config_var() { lua - "$1" "$2" "$3" < "$3.bak" local key=assert(arg[1]) local value=assert(arg[2]) local fn=assert(arg[3]) local file=assert(io.open(fn)) local made_change=false for line in file:lines() do if line:match("^#?%s*"..key.."=.*$") then line=key.."="..value made_change=true end print(line) end if not made_change then print(key.."="..value) end EOF mv "$3.bak" "$3" } clear_config_var() { lua - "$1" "$2" < "$2.bak" local key=assert(arg[1]) local fn=assert(arg[2]) local file=assert(io.open(fn)) for line in file:lines() do if line:match("^%s*"..key.."=.*$") then line="#"..line end print(line) end EOF mv "$2.bak" "$2" } get_config_var() { lua - "$1" "$2" <&1 1>&2 2>&3) else COUNTRY=$1 true fi if [ $? -eq 0 ];then if [ -e /etc/wpa_supplicant/wpa_supplicant.conf ]; then if grep -q "^country=" /etc/wpa_supplicant/wpa_supplicant.conf ; then sed -i --follow-symlinks "s/^country=.*/country=$COUNTRY/g" /etc/wpa_supplicant/wpa_supplicant.conf else sed -i --follow-symlinks "1i country=$COUNTRY" /etc/wpa_supplicant/wpa_supplicant.conf fi else echo "country=$COUNTRY" > /etc/wpa_supplicant/wpa_supplicant.conf fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Wi-fi country set to $COUNTRY" 20 60 1 fi ASK_TO_REBOOT=1 fi IFS=$oIFS } get_hostname() { cat /etc/hostname | tr -d " \t\n\r" } do_hostname() { if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "\ Please note: RFCs mandate that a hostname's labels \ may contain only the ASCII letters 'a' through 'z' (case-insensitive), the digits '0' through '9', and the hyphen. Hostname labels cannot begin or end with a hyphen. No other symbols, punctuation characters, or blank spaces are permitted.\ " 20 70 1 fi CURRENT_HOSTNAME=`cat /etc/hostname | tr -d " \t\n\r"` if [ "$INTERACTIVE" = True ]; then NEW_HOSTNAME=$(whiptail --inputbox "Please enter a hostname" 20 60 "$CURRENT_HOSTNAME" 3>&1 1>&2 2>&3) else NEW_HOSTNAME=$1 true fi if [ $? -eq 0 ]; then echo $NEW_HOSTNAME > /etc/hostname sed -i "s/127.0.1.1.*$CURRENT_HOSTNAME/127.0.1.1\t$NEW_HOSTNAME/g" /etc/hosts ASK_TO_REBOOT=1 fi } do_memory_split() { # Memory Split if [ -e /boot/start_cd.elf ]; then # New-style memory split setting ## get current memory split from /boot/config.txt arm=$(vcgencmd get_mem arm | cut -d '=' -f 2 | cut -d 'M' -f 1) gpu=$(vcgencmd get_mem gpu | cut -d '=' -f 2 | cut -d 'M' -f 1) tot=$(($arm+$gpu)) if [ $tot -gt 512 ]; then CUR_GPU_MEM=$(get_config_var gpu_mem_1024 $CONFIG) elif [ $tot -gt 256 ]; then CUR_GPU_MEM=$(get_config_var gpu_mem_512 $CONFIG) else CUR_GPU_MEM=$(get_config_var gpu_mem_256 $CONFIG) fi if [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ]; then CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG) fi [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ] && CUR_GPU_MEM=64 ## ask users what gpu_mem they want if [ "$INTERACTIVE" = True ]; then NEW_GPU_MEM=$(whiptail --inputbox "How much memory should the GPU have? e.g. 16/32/64/128/256" \ 20 70 -- "$CUR_GPU_MEM" 3>&1 1>&2 2>&3) else NEW_GPU_MEM=$1 true fi if [ $? -eq 0 ]; then if [ $(get_config_var gpu_mem_1024 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_512 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_256 $CONFIG) != "0" ]; then if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Device-specific memory settings were found. These have been cleared." 20 60 2 fi clear_config_var gpu_mem_1024 $CONFIG clear_config_var gpu_mem_512 $CONFIG clear_config_var gpu_mem_256 $CONFIG fi set_config_var gpu_mem "$NEW_GPU_MEM" $CONFIG ASK_TO_REBOOT=1 fi else # Old firmware so do start.elf renaming get_current_memory_split MEMSPLIT=$(whiptail --menu "Set memory split.\n$MEMSPLIT_DESCRIPTION" 20 60 10 \ "240" "240MiB for ARM, 16MiB for VideoCore" \ "224" "224MiB for ARM, 32MiB for VideoCore" \ "192" "192MiB for ARM, 64MiB for VideoCore" \ "128" "128MiB for ARM, 128MiB for VideoCore" \ 3>&1 1>&2 2>&3) if [ $? -eq 0 ]; then set_memory_split ${MEMSPLIT} ASK_TO_REBOOT=1 fi fi } get_current_memory_split() { AVAILABLE_SPLITS="128 192 224 240" MEMSPLIT_DESCRIPTION="" for SPLIT in $AVAILABLE_SPLITS;do if [ -e /boot/arm${SPLIT}_start.elf ] && cmp /boot/arm${SPLIT}_start.elf /boot/start.elf >/dev/null 2>&1;then CURRENT_MEMSPLIT=$SPLIT MEMSPLIT_DESCRIPTION="Current: ${CURRENT_MEMSPLIT}MiB for ARM, $((256 - $CURRENT_MEMSPLIT))MiB for VideoCore" break fi done } set_memory_split() { cp -a /boot/arm${1}_start.elf /boot/start.elf sync } do_overclock() { if ! is_pione && ! is_pitwo; then whiptail --msgbox "This Pi cannot be overclocked." 20 60 2 return 1 fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "\ Be aware that overclocking may reduce the lifetime of your Raspberry Pi. If overclocking at a certain level causes system instability, try a more modest overclock. Hold down shift during boot to temporarily disable overclock. See http://elinux.org/RPi_Overclocking for more information.\ " 20 70 1 if is_pione; then OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \ "None" "700MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \ "Modest" "800MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \ "Medium" "900MHz ARM, 250MHz core, 450MHz SDRAM, 2 overvolt" \ "High" "950MHz ARM, 250MHz core, 450MHz SDRAM, 6 overvolt" \ "Turbo" "1000MHz ARM, 500MHz core, 600MHz SDRAM, 6 overvolt" \ 3>&1 1>&2 2>&3) elif is_pitwo; then OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \ "None" "900MHz ARM, 250MHz core, 450MHz SDRAM, 0 overvolt" \ "High" "1000MHz ARM, 500MHz core, 500MHz SDRAM, 2 overvolt" \ 3>&1 1>&2 2>&3) fi else OVERCLOCK=$1 true fi if [ $? -eq 0 ]; then case "$OVERCLOCK" in None) clear_overclock ;; Modest) set_overclock Modest 800 250 400 0 ;; Medium) set_overclock Medium 900 250 450 2 ;; High) if is_pione; then set_overclock High 950 250 450 6 else set_overclock High 1000 500 500 2 fi ;; Turbo) set_overclock Turbo 1000 500 600 6 ;; *) whiptail --msgbox "Programmer error, unrecognised overclock preset" 20 60 2 return 1 ;; esac ASK_TO_REBOOT=1 fi } set_overclock() { set_config_var arm_freq $2 $CONFIG && set_config_var core_freq $3 $CONFIG && set_config_var sdram_freq $4 $CONFIG && set_config_var over_voltage $5 $CONFIG && if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Set overclock to preset '$1'" 20 60 2 fi } clear_overclock () { clear_config_var arm_freq $CONFIG && clear_config_var core_freq $CONFIG && clear_config_var sdram_freq $CONFIG && clear_config_var over_voltage $CONFIG && if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Set overclock to preset 'None'" 20 60 2 fi } get_ssh() { if service ssh status | grep -q inactive; then echo 1 else echo 0 fi } do_ssh() { if [ -e /var/log/regen_ssh_keys.log ] && ! grep -q "^finished" /var/log/regen_ssh_keys.log; then whiptail --msgbox "Initial ssh key generation still running. Please wait and try again." 20 60 2 return 1 fi DEFAULT=--defaultno if [ $(get_ssh) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the SSH server to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then update-rc.d ssh enable && invoke-rc.d ssh start && STATUS=enabled elif [ $RET -eq 1 ]; then update-rc.d ssh disable && invoke-rc.d ssh stop && STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The SSH server is $STATUS" 20 60 1 fi } get_vnc() { if systemctl status vncserver-x11-serviced.service | grep -q inactive; then echo 1 else echo 0 fi } do_vnc() { DEFAULT=--defaultno if [ $(get_vnc) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the VNC Server to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then if [ ! -d /usr/share/doc/realvnc-vnc-server ] ; then sudo apt-get install realvnc-vnc-server fi systemctl enable vncserver-x11-serviced.service && systemctl start vncserver-x11-serviced.service && STATUS=enabled elif [ $RET -eq 1 ]; then systemctl disable vncserver-x11-serviced.service && systemctl stop vncserver-x11-serviced.service && STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The VNC Server is $STATUS" 20 60 1 fi } get_spi() { if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*spi(=(on|true|yes|1))?(,.*)?$" $CONFIG; then echo 0 else echo 1 fi } do_spi() { DEFAULT=--defaultno if [ $(get_spi) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the SPI interface to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then SETTING=on STATUS=enabled elif [ $RET -eq 1 ]; then SETTING=off STATUS=disabled else return $RET fi set_config_var dtparam=spi $SETTING $CONFIG && if ! [ -e $BLACKLIST ]; then touch $BLACKLIST fi sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*spi[-_]bcm2708\)/#\1/" dtparam spi=$SETTING if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The SPI interface is $STATUS" 20 60 1 fi } get_i2c() { if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*i2c(_arm)?(=(on|true|yes|1))?(,.*)?$" $CONFIG; then echo 0 else echo 1 fi } do_i2c() { DEFAULT=--defaultno if [ $(get_i2c) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the ARM I2C interface to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then SETTING=on STATUS=enabled elif [ $RET -eq 1 ]; then SETTING=off STATUS=disabled else return $RET fi set_config_var dtparam=i2c_arm $SETTING $CONFIG && if ! [ -e $BLACKLIST ]; then touch $BLACKLIST fi sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*i2c[-_]bcm2708\)/#\1/" sed /etc/modules -i -e "s/^#[[:space:]]*\(i2c[-_]dev\)/\1/" if ! grep -q "^i2c[-_]dev" /etc/modules; then printf "i2c-dev\n" >> /etc/modules fi dtparam i2c_arm=$SETTING modprobe i2c-dev if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The ARM I2C interface is $STATUS" 20 60 1 fi } get_serial() { if grep -q -E "console=(serial0|ttyAMA0|ttyS0)" $CMDLINE ; then echo 0 else echo 1 fi } get_serial_hw() { if grep -q -E "^enable_uart=1" $CONFIG ; then echo 0 elif grep -q -E "^enable_uart=0" $CONFIG ; then echo 1 elif [ -e /dev/serial0 ] ; then echo 0 else echo 1 fi } do_serial() { DEFAULTS=--defaultno DEFAULTH=--defaultno CURRENTS=0 CURRENTH=0 if [ $(get_serial) -eq 0 ]; then DEFAULTS= CURRENTS=1 fi if [ $(get_serial_hw) -eq 0 ]; then DEFAULTH= CURRENTH=1 fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like a login shell to be accessible over serial?" $DEFAULTS 20 60 2 RET=$? else get_init_sys RET=$1 fi if [ $RET -eq $CURRENTS ]; then ASK_TO_REBOOT=1 fi if [ $RET -eq 0 ]; then if [ $SYSTEMD -eq 0 ]; then sed -i /etc/inittab -e "s|^#\(.*:.*:respawn:.*ttyAMA0\)|\1|" if ! grep -q "^T.*:.*:respawn:.*ttyAMA0" /etc/inittab; then printf "T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100\n" >> /etc/inittab fi fi if grep -q "console=ttyAMA0" $CMDLINE ; then if [ -e /proc/device-tree/aliases/serial0 ]; then sed -i $CMDLINE -e "s/console=ttyAMA0/console=serial0/" fi elif ! grep -q "console=ttyAMA0" $CMDLINE && ! grep -q "console=serial0" $CMDLINE ; then if [ -e /proc/device-tree/aliases/serial0 ]; then sed -i $CMDLINE -e "s/root=/console=serial0,115200 root=/" else sed -i $CMDLINE -e "s/root=/console=ttyAMA0,115200 root=/" fi fi set_config_var enable_uart 1 $CONFIG SSTATUS=enabled HSTATUS=enabled elif [ $RET -eq 1 ]; then if [ $SYSTEMD -eq 0 ]; then sed -i /etc/inittab -e "s|^.*:.*:respawn:.*ttyAMA0|#&|" fi sed -i $CMDLINE -e "s/console=ttyAMA0,[0-9]\+ //" sed -i $CMDLINE -e "s/console=serial0,[0-9]\+ //" SSTATUS=disabled if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the serial port hardware to be enabled?" $DEFAULTH 20 60 2 RET=$? else RET=1 fi if [ $RET -eq $CURRENTH ]; then ASK_TO_REBOOT=1 fi if [ $RET -eq 0 ]; then set_config_var enable_uart 1 $CONFIG HSTATUS=enabled elif [ $RET -eq 1 ]; then set_config_var enable_uart 0 $CONFIG HSTATUS=disabled else return $RET fi else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The serial login shell is $SSTATUS\nThe serial interface is $HSTATUS" 20 60 1 fi } disable_raspi_config_at_boot() { if [ -e /etc/profile.d/raspi-config.sh ]; then rm -f /etc/profile.d/raspi-config.sh if [ $SYSTEMD -eq 1 ]; then if [ -e /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf ]; then rm /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf fi else sed -i /etc/inittab \ -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \ -e "/#\s*RPICFG_TO_DISABLE/d" fi telinit q fi } get_boot_cli() { if systemctl get-default | grep -q multi-user ; then echo 0 else echo 1 fi } get_autologin() { get_init_sys if [ $(get_boot_cli) -eq 0 ]; then # booting to CLI - check the autologin in getty or initd */ if [ $SYSTEMD -eq 1 ]; then # systemd used - check getty */ if grep -q autologin /etc/systemd/system/getty.target.wants/getty@tty1.service ; then echo 0 else echo 1 fi else # systemd not used - check initd */ if grep -q login /etc/inittab ; then echo 0 else echo 1 fi fi else # booting to desktop - check the autologin for lightdm */ if grep -q "^autologin-user=pi" /etc/lightdm/lightdm.conf ; then echo 0 else echo 1 fi fi } do_boot_behaviour() { if [ "$INTERACTIVE" = True ]; then BOOTOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ "B1 Console" "Text console, requiring user to login" \ "B2 Console Autologin" "Text console, automatically logged in as 'pi' user" \ "B3 Desktop" "Desktop GUI, requiring user to login" \ "B4 Desktop Autologin" "Desktop GUI, automatically logged in as 'pi' user" \ 3>&1 1>&2 2>&3) else get_init_sys BOOTOPT=$1 true fi if [ $? -eq 0 ]; then case "$BOOTOPT" in B1*) if [ $SYSTEMD -eq 1 ]; then systemctl set-default multi-user.target ln -fs /lib/systemd/system/getty@.service /etc/systemd/system/getty.target.wants/getty@tty1.service else [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2 sed /etc/inittab -i -e "s/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/" fi ;; B2*) if [ $SYSTEMD -eq 1 ]; then systemctl set-default multi-user.target ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service else [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2 sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/" fi ;; B3*) if [ -e /etc/init.d/lightdm ]; then if [ $SYSTEMD -eq 1 ]; then systemctl set-default graphical.target ln -fs /lib/systemd/system/getty@.service /etc/systemd/system/getty.target.wants/getty@tty1.service else update-rc.d lightdm enable 2 fi sed /etc/lightdm/lightdm.conf -i -e "s/^autologin-user=.*/#autologin-user=/" disable_raspi_config_at_boot else whiptail --msgbox "Do sudo apt-get install lightdm to allow configuration of boot to desktop" 20 60 2 return 1 fi ;; B4*) if [ -e /etc/init.d/lightdm ]; then if id -u pi > /dev/null 2>&1; then if [ $SYSTEMD -eq 1 ]; then systemctl set-default graphical.target ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service else update-rc.d lightdm enable 2 fi sed /etc/lightdm/lightdm.conf -i -e "s/^\(#\|\)autologin-user=.*/autologin-user=pi/" disable_raspi_config_at_boot else whiptail --msgbox "The pi user has been removed, can't set up boot to desktop" 20 60 2 fi else whiptail --msgbox "Do sudo apt-get install lightdm to allow configuration of boot to desktop" 20 60 2 return 1 fi ;; *) whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 return 1 ;; esac ASK_TO_REBOOT=1 fi } get_boot_wait() { if test -e /etc/systemd/system/dhcpcd.service.d/wait.conf; then echo 0 else echo 1 fi } do_boot_wait() { get_init_sys if [ $SYSTEMD -eq 0 ]; then whiptail --msgbox "This option can only be selected when using systemd" 20 60 2 return 1 fi DEFAULT=--defaultno if [ $(get_boot_wait) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like boot to wait until a network connection is established?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then mkdir -p /etc/systemd/system/dhcpcd.service.d/ cat > /etc/systemd/system/dhcpcd.service.d/wait.conf << EOF [Service] ExecStart= ExecStart=/sbin/dhcpcd -q -w EOF STATUS=enabled elif [ $RET -eq 1 ]; then rm -f /etc/systemd/system/dhcpcd.service.d/wait.conf STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Waiting for network on boot is $STATUS" 20 60 1 fi } get_boot_splash() { if is_pi ; then if grep -q "splash" $CMDLINE ; then echo 0 else echo 1 fi else if grep -q "GRUB_CMDLINE_LINUX_DEFAULT.*splash" /etc/default/grub ; then echo 0 else echo 1 fi fi } do_boot_splash() { if [ ! -e /usr/share/plymouth/themes/pix/pix.script ]; then if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The splash screen is not installed so cannot be activated" 20 60 2 fi return 1 fi DEFAULT=--defaultno if [ $(get_boot_splash) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like to show the splash screen at boot?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then if is_pi ; then if ! grep -q "splash" $CMDLINE ; then sed -i $CMDLINE -e "s/$/ quiet splash plymouth.ignore-serial-consoles/" fi else sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1 quiet splash plymouth.ignore-serial-consoles\"/" sed -i /etc/default/grub -e "s/ \+/ /g" sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/" update-grub fi STATUS=enabled elif [ $RET -eq 1 ]; then if is_pi ; then if grep -q "splash" $CMDLINE ; then sed -i $CMDLINE -e "s/ quiet//" sed -i $CMDLINE -e "s/ splash//" sed -i $CMDLINE -e "s/ plymouth.ignore-serial-consoles//" fi else sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)quiet\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)splash\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)plymouth.ignore-serial-consoles\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" sed -i /etc/default/grub -e "s/ \+/ /g" sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/" update-grub fi STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Splash screen at boot is $STATUS" 20 60 1 fi } get_rgpio() { if test -e /etc/systemd/system/pigpiod.service.d/public.conf; then echo 0 else echo 1 fi } do_rgpio() { get_init_sys if [ $SYSTEMD -eq 0 ]; then whiptail --msgbox "This option can only be selected when using systemd" 20 60 2 return 1 fi DEFAULT=--defaultno if [ $(get_rgpio) -eq 0 ]; then DEFAULT= fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the GPIO server to be accessible over the network?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq 0 ]; then mkdir -p /etc/systemd/system/pigpiod.service.d/ cat > /etc/systemd/system/pigpiod.service.d/public.conf << EOF [Service] ExecStart= ExecStart=/usr/bin/pigpiod EOF STATUS=enabled elif [ $RET -eq 1 ]; then rm -f /etc/systemd/system/pigpiod.service.d/public.conf STATUS=disabled else return $RET fi systemctl daemon-reload systemctl restart pigpiod if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "Remote access to the GPIO server is $STATUS" 20 60 1 fi } get_camera() { CAM=$(get_config_var start_x $CONFIG) if [ $CAM -eq 1 ]; then echo 0 else echo 1 fi } do_camera() { if [ ! -e /boot/start_x.elf ]; then whiptail --msgbox "Your firmware appears to be out of date (no start_x.elf). Please update" 20 60 2 return 1 fi sed $CONFIG -i -e "s/^startx/#startx/" sed $CONFIG -i -e "s/^fixup_file/#fixup_file/" DEFAULT=--defaultno CURRENT=0 if [ $(get_camera) -eq 0 ]; then DEFAULT= CURRENT=1 fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the camera interface to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq $CURRENT ]; then ASK_TO_REBOOT=1 fi if [ $RET -eq 0 ]; then set_config_var start_x 1 $CONFIG CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG) if [ -z "$CUR_GPU_MEM" ] || [ "$CUR_GPU_MEM" -lt 128 ]; then set_config_var gpu_mem 128 $CONFIG fi STATUS=enabled elif [ $RET -eq 1 ]; then set_config_var start_x 0 $CONFIG sed $CONFIG -i -e "s/^start_file/#start_file/" STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The camera interface is $STATUS" 20 60 1 fi } get_onewire() { if grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then echo 0 else echo 1 fi } do_onewire() { DEFAULT=--defaultno CURRENT=0 if [ $(get_onewire) -eq 0 ]; then DEFAULT= CURRENT=1 fi if [ "$INTERACTIVE" = True ]; then whiptail --yesno "Would you like the one-wire interface to be enabled?" $DEFAULT 20 60 2 RET=$? else RET=$1 fi if [ $RET -eq $CURRENT ]; then ASK_TO_REBOOT=1 fi if [ $RET -eq 0 ]; then sed $CONFIG -i -e "s/^#dtoverlay=w1-gpio/dtoverlay=w1-gpio/" if ! grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then printf "dtoverlay=w1-gpio\n" >> $CONFIG fi STATUS=enabled elif [ $RET -eq 1 ]; then sed $CONFIG -i -e "s/^dtoverlay=w1-gpio/#dtoverlay=w1-gpio/" STATUS=disabled else return $RET fi if [ "$INTERACTIVE" = True ]; then whiptail --msgbox "The one-wire interface is $STATUS" 20 60 1 fi } do_gldriver() { if [ ! -e /boot/overlays/vc4-kms-v3d.dtbo ]; then whiptail --msgbox "Driver and kernel not present on your system. Please update" 20 60 2 return 1 fi if [ $(dpkg -l libgl1-mesa-dri | tail -n 1 | cut -d ' ' -f 1) != "ii" ]; then whiptail --msgbox "libgl1-mesa-dri not found - please install" 20 60 2 return 1 fi GLOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "GL Driver" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ "G1 GL (Full KMS)" "OpenGL desktop driver with full KMS" \ "G2 GL (Fake KMS)" "OpenGL desktop driver with fake KMS" \ "G3 Legacy" "Original non-GL desktop driver" \ 3>&1 1>&2 2>&3) if [ $? -eq 0 ]; then case "$GLOPT" in G1*) if ! grep -q -E "^dtoverlay=vc4-kms-v3d" $CONFIG; then ASK_TO_REBOOT=1 fi sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/" sed $CONFIG -i -e "s/^#dtoverlay=vc4-kms-v3d/dtoverlay=vc4-kms-v3d/" if ! grep -q -E "^dtoverlay=vc4-kms-v3d" $CONFIG; then printf "dtoverlay=vc4-kms-v3d\n" >> $CONFIG fi STATUS="The full KMS GL driver is enabled." ;; G2*) if ! grep -q -E "^dtoverlay=vc4-fkms-v3d" $CONFIG; then ASK_TO_REBOOT=1 fi sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/" sed $CONFIG -i -e "s/^#dtoverlay=vc4-fkms-v3d/dtoverlay=vc4-fkms-v3d/" if ! grep -q -E "^dtoverlay=vc4-fkms-v3d" $CONFIG; then printf "dtoverlay=vc4-fkms-v3d\n" >> $CONFIG fi STATUS="The fake KMS GL driver is enabled." ;; G3*) if grep -q -E "^dtoverlay=vc4-f?kms-v3d" $CONFIG; then ASK_TO_REBOOT=1 fi sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/" sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/" STATUS="The GL driver is disabled." ;; *) whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 return 1 ;; esac else return 0 fi if echo "$GLOPT" | grep -q -E "1|2" ; then if grep -q "splash" $CMDLINE ; then sed -i $CMDLINE -e "s/ quiet//" sed -i $CMDLINE -e "s/ splash//" sed -i $CMDLINE -e "s/ plymouth.ignore-serial-consoles//" fi sed $CONFIG -i -e "s/^gpu_mem/#gpu_mem/" fi whiptail --msgbox "$STATUS" 20 60 1 } do_update() { apt-get update && apt-get install raspi-config && printf "Sleeping 5 seconds before reloading raspi-config\n" && sleep 5 && exec raspi-config } do_audio() { if [ "$INTERACTIVE" = True ]; then AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \ "0" "Auto" \ "1" "Force 3.5mm ('headphone') jack" \ "2" "Force HDMI" \ 3>&1 1>&2 2>&3) else AUDIO_OUT=$1 fi if [ $? -eq 0 ]; then amixer cset numid=3 "$AUDIO_OUT" fi } do_resolution() { if [ "$INTERACTIVE" = True ]; then CMODE=$(get_config_var hdmi_mode $CONFIG) CGROUP=$(get_config_var hdmi_group $CONFIG) if [ $CMODE -eq 0 ] ; then CSET="Default" elif [ $CGROUP -eq 2 ] ; then CSET="DMT Mode "$CMODE else CSET="CEA Mode "$CMODE fi oIFS="$IFS" IFS="/" if tvservice -d /dev/null | grep -q Nothing ; then value="Default/720x480/DMT Mode 4/640x480 60Hz 4:3/DMT Mode 9/800x600 60Hz 4:3/DMT Mode 16/1024x768 60Hz 4:3/DMT Mode 85/1280x720 60Hz 16:9/DMT Mode 35/1280x1024 60Hz 5:4/DMT Mode 51/1600x1200 60Hz 4:3/DMT Mode 82/1920x1080 60Hz 16:9/" else value="Default/Monitor preferred resolution/" value=$value$(tvservice -m CEA | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/CEA Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/') value=$value$(tvservice -m DMT | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/DMT Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/') fi RES=$(whiptail --default-item $CSET --menu "Choose screen resolution" 20 60 10 ${value} 3>&1 1>&2 2>&3) STATUS=$? IFS=$oIFS if [ $STATUS -eq 0 ] ; then GRS=$(echo "$RES" | cut -d ' ' -f 1) MODE=$(echo "$RES" | cut -d ' ' -f 3) if [ $GRS = "Default" ] ; then MODE=0 elif [ $GRS = "DMT" ] ; then GROUP=2 else GROUP=1 fi fi else GROUP=$1 MODE=$2 STATUS=0 fi if [ $STATUS -eq 0 ]; then if [ $MODE -eq 0 ]; then clear_config_var hdmi_force_hotplug $CONFIG clear_config_var hdmi_group $CONFIG clear_config_var hdmi_mode $CONFIG else set_config_var hdmi_force_hotplug 1 $CONFIG set_config_var hdmi_group $GROUP $CONFIG set_config_var hdmi_mode $MODE $CONFIG fi if [ "$INTERACTIVE" = True ]; then if [ $MODE -eq 0 ] ; then whiptail --msgbox "The resolution is set to default" 20 60 1 else whiptail --msgbox "The resolution is set to $GRS mode $MODE" 20 60 1 fi fi if [ $MODE -eq 0 ] ; then TSET="Default" elif [ $GROUP -eq 2 ] ; then TSET="DMT Mode "$MODE else TSET="CEA Mode "$MODE fi if [ "$TSET" != "$CSET" ] ; then ASK_TO_REBOOT=1 fi fi } do_finish() { disable_raspi_config_at_boot if [ $ASK_TO_REBOOT -eq 1 ]; then whiptail --yesno "Would you like to reboot now?" 20 60 2 if [ $? -eq 0 ]; then # yes sync reboot fi fi exit 0 } # $1 = filename, $2 = key name get_json_string_val() { sed -n -e "s/^[[:space:]]*\"$2\"[[:space:]]*:[[:space:]]*\"\(.*\)\"[[:space:]]*,$/\1/p" $1 } # TODO: This is probably broken do_apply_os_config() { [ -e /boot/os_config.json ] || return 0 NOOBSFLAVOUR=$(get_json_string_val /boot/os_config.json flavour) NOOBSLANGUAGE=$(get_json_string_val /boot/os_config.json language) NOOBSKEYBOARD=$(get_json_string_val /boot/os_config.json keyboard) if [ -n "$NOOBSFLAVOUR" ]; then printf "Setting flavour to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSFLAVOUR" printf "Unrecognised flavour. Ignoring\n" fi # TODO: currently ignores en_gb settings as we assume we are running in a # first boot context, where UK English settings are default case "$NOOBSLANGUAGE" in "en") if [ "$NOOBSKEYBOARD" = "gb" ]; then DEBLANGUAGE="" # UK english is the default, so ignore else DEBLANGUAGE="en_US.UTF-8" fi ;; "de") DEBLANGUAGE="de_DE.UTF-8" ;; "fi") DEBLANGUAGE="fi_FI.UTF-8" ;; "fr") DEBLANGUAGE="fr_FR.UTF-8" ;; "hu") DEBLANGUAGE="hu_HU.UTF-8" ;; "ja") DEBLANGUAGE="ja_JP.UTF-8" ;; "nl") DEBLANGUAGE="nl_NL.UTF-8" ;; "pt") DEBLANGUAGE="pt_PT.UTF-8" ;; "ru") DEBLANGUAGE="ru_RU.UTF-8" ;; "zh_CN") DEBLANGUAGE="zh_CN.UTF-8" ;; *) printf "Language '%s' not handled currently. Run sudo raspi-config to set up" "$NOOBSLANGUAGE" ;; esac if [ -n "$DEBLANGUAGE" ]; then printf "Setting language to %s based on os_config.json from NOOBS. May take a while\n" "$DEBLANGUAGE" cat << EOF | debconf-set-selections locales locales/locales_to_be_generated multiselect $DEBLANGUAGE UTF-8 EOF rm /etc/locale.gen dpkg-reconfigure -f noninteractive locales update-locale LANG="$DEBLANGUAGE" cat << EOF | debconf-set-selections locales locales/default_environment_locale select $DEBLANGUAGE EOF fi if [ -n "$NOOBSKEYBOARD" -a "$NOOBSKEYBOARD" != "gb" ]; then printf "Setting keyboard layout to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSKEYBOARD" sed -i /etc/default/keyboard -e "s/^XKBLAYOUT.*/XKBLAYOUT=\"$NOOBSKEYBOARD\"/" dpkg-reconfigure -f noninteractive keyboard-configuration invoke-rc.d keyboard-setup start fi return 0 } nonint() { $* } # # Command line options for non-interactive use # for i in $* do case $i in --memory-split) OPT_MEMORY_SPLIT=GET printf "Not currently supported\n" exit 1 ;; --memory-split=*) OPT_MEMORY_SPLIT=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` printf "Not currently supported\n" exit 1 ;; --expand-rootfs) INTERACTIVE=False do_expand_rootfs printf "Please reboot\n" exit 0 ;; --apply-os-config) INTERACTIVE=False do_apply_os_config exit $? ;; nonint) INTERACTIVE=False $@ ;; *) # unknown option ;; esac done #if [ "GET" = "${OPT_MEMORY_SPLIT:-}" ]; then # set -u # Fail on unset variables # get_current_memory_split # echo $CURRENT_MEMSPLIT # exit 0 #fi # Everything else needs to be run as root if [ $(id -u) -ne 0 ]; then printf "Script must be run as root. Try 'sudo raspi-config'\n" exit 1 fi if [ -n "${OPT_MEMORY_SPLIT:-}" ]; then set -e # Fail when a command errors set_memory_split "${OPT_MEMORY_SPLIT}" exit 0 fi do_internationalisation_menu() { if is_ssh ; then FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "I1 Change Locale" "Set up language and regional settings to match your location" \ "I2 Change Timezone" "Set up timezone to match your location" \ "I4 Change Wi-fi Country" "Set the legal channels used in your country" \ 3>&1 1>&2 2>&3) else FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "I1 Change Locale" "Set up language and regional settings to match your location" \ "I2 Change Timezone" "Set up timezone to match your location" \ "I3 Change Keyboard Layout" "Set the keyboard layout to match your keyboard" \ "I4 Change Wi-fi Country" "Set the legal channels used in your country" \ 3>&1 1>&2 2>&3) fi RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in I1\ *) do_change_locale ;; I2\ *) do_change_timezone ;; I3\ *) do_configure_keyboard ;; I4\ *) do_wifi_country ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi } do_interface_menu() { if ! is_pi ; then do_ssh else FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "P1 Camera" "Enable/Disable connection to the Raspberry Pi Camera" \ "P2 SSH" "Enable/Disable remote command line access to your Pi using SSH" \ "P3 VNC" "Enable/Disable graphical remote access to your Pi using RealVNC" \ "P4 SPI" "Enable/Disable automatic loading of SPI kernel module" \ "P5 I2C" "Enable/Disable automatic loading of I2C kernel module" \ "P6 Serial" "Enable/Disable shell and kernel messages on the serial connection" \ "P7 1-Wire" "Enable/Disable one-wire interface" \ "P8 Remote GPIO" "Enable/Disable remote access to GPIO pins" \ 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in P1\ *) do_camera ;; P2\ *) do_ssh ;; P3\ *) do_vnc ;; P4\ *) do_spi ;; P5\ *) do_i2c ;; P6\ *) do_serial ;; P7\ *) do_onewire ;; P8\ *) do_rgpio ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi fi } do_advanced_menu() { FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "A1 Expand Filesystem" "Ensures that all of the SD card storage is available to the OS" \ "A2 Overscan" "You may need to configure overscan if black bars are present on display" \ "A3 Memory Split" "Change the amount of memory made available to the GPU" \ "A4 Audio" "Force audio out through HDMI or 3.5mm jack" \ "A5 Resolution" "Set a specific screen resolution" \ "A6 GL Driver" "Enable/Disable experimental desktop GL driver" \ 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in A1\ *) do_expand_rootfs ;; A2\ *) do_overscan ;; A3\ *) do_memory_split ;; A4\ *) do_audio ;; A5\ *) do_resolution ;; A6\ *) do_gldriver ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi } do_boot_menu() { if is_live ; then FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "B1 Desktop / CLI" "Choose whether to boot into a desktop environment or the command line" \ "B2 Wait for Network at Boot" "Choose whether to wait for network connection during boot" \ 3>&1 1>&2 2>&3) else FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "B1 Desktop / CLI" "Choose whether to boot into a desktop environment or the command line" \ "B2 Wait for Network at Boot" "Choose whether to wait for network connection during boot" \ "B3 Splash Screen" "Choose graphical splash screen or text boot" \ 3>&1 1>&2 2>&3) fi RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in B1\ *) do_boot_behaviour ;; B2\ *) do_boot_wait ;; B3\ *) do_boot_splash ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi } # # Interactive use loop # if [ "$INTERACTIVE" = True ]; then if is_pi && ! mountpoint -q /boot; then whiptail --msgbox "The boot partition is not mounted - cannot configure. Note that raspi-config is intended for use on Raspbian only and cannot be guaranteed to work on other operating systems." 20 60 1 exit 1 fi [ -e $CONFIG ] || touch $CONFIG get_init_sys calc_wt_size while true; do if is_pi ; then FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \ "1 Change User Password" "Change password for the default user (pi)" \ "2 Hostname" "Set the visible name for this Pi on a network" \ "3 Boot Options" "Configure options for start-up" \ "4 Localisation Options" "Set up language and regional settings to match your location" \ "5 Interfacing Options" "Configure connections to peripherals" \ "6 Overclock" "Configure overclocking for your Pi" \ "7 Advanced Options" "Configure advanced settings" \ "8 Update" "Update this tool to the latest version" \ "9 About raspi-config" "Information about this configuration tool" \ 3>&1 1>&2 2>&3) else FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \ "1 Change User Password" "Change password for the default user (pi)" \ "2 Hostname" "Set the visible name for this PC on a network" \ "3 Boot Options" "Configure options for start-up" \ "4 Localisation Options" "Set up language and regional settings to match your location" \ "5 SSH" "Enable/Disable remote command line access to your PC using SSH" \ "8 Update" "Update this tool to the latest version" \ "9 About raspi-config" "Information about this configuration tool" \ 3>&1 1>&2 2>&3) fi RET=$? if [ $RET -eq 1 ]; then do_finish elif [ $RET -eq 0 ]; then case "$FUN" in 1\ *) do_change_pass ;; 2\ *) do_hostname ;; 3\ *) do_boot_menu ;; 4\ *) do_internationalisation_menu ;; 5\ *) do_interface_menu ;; 6\ *) do_overclock ;; 7\ *) do_advanced_menu ;; 8\ *) do_update ;; 9\ *) do_about ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 else exit 1 fi done fi