spl
f8f0a5ef77
dtparam used instead of modprobe for SPI and I2C.
2016-04-28 15:42:20 +01:00
Serge Schneider
3e26c9b3b2
pigpio service renamed to pigpiod
2016-04-27 08:57:00 +01:00
spl
8af52bed39
UART switch added to serial; GPIO server public access finished.
2016-04-26 13:10:36 +01:00
spl
34a66bab0c
Skeleton added for setting security state of GPIO server.
2016-04-26 13:10:36 +01:00
spl
a4397f7335
Reads in gpu_mem_<size> settings and clears them when writing.
2016-04-26 13:10:36 +01:00
Andrew Scheller
bcdfa348b3
Prevent errors when enabling "Fast" network boot multiple times
...
Fixes #17
2016-04-01 14:59:40 +01:00
spl
694e8536f3
1-wire interface control added.
2016-03-22 16:44:34 +00:00
spl
1becd779ed
Wifi country code setting now creates wpa_supplicant.conf if it doesn't exist.
2016-03-22 16:43:32 +00:00
spl
858e438f70
Wifi setting in raspi-config can now be called in non-interactive mode.
2016-02-25 07:48:41 +00:00
spl
27d962dc7d
Added wi-fi country setting to raspi-config
2016-02-25 07:48:41 +00:00
spl
acfd7db900
Mods to support new serial device alias in cmdline.txt.
2016-02-25 07:48:41 +00:00
spl
5ef7e7cbd7
Pi board checks now take account of warranty bits.
2016-02-09 16:16:49 +00:00
spl
ea2b690b38
raspi-config now checks for mesa driver before allowing GL driver to be enabled.
2016-02-09 13:56:16 +00:00
Simon Long
8fed014e86
Compute Module added to is_pione.
2016-02-01 12:27:55 +00:00
Simon Long
32191d23d5
Do not allow GL driver to be enabled on 2835-based Pis - it needs at least 1GB of RAM.
2016-01-25 12:29:41 +00:00
spl
31bc453040
Overclocking behaviour made board-specific.
2016-01-25 12:29:40 +00:00
spl
09aebddff6
GPU memory reset to default when GL driver enabled.
2016-01-21 11:11:57 +00:00
spl
4c8e349f87
GL driver option now checks that xcompmgr is installed.
2016-01-21 11:11:57 +00:00
spl
fa7563a0c0
Launch of simple compositor added when GL driver is enabled.
2016-01-21 11:11:57 +00:00
spl
48f83a0d94
Filename of V3d overlay corrected.
2016-01-21 11:11:57 +00:00
spl
eb3a9b8589
Option added to raspi-config to select experimental GL driver.
2016-01-19 13:56:36 +00:00
Serge Schneider
7cd570b63e
Update URL
2016-01-08 10:41:39 +00:00
Serge Schneider
586bee19c9
Fix auto-login and typos
2016-01-08 10:30:24 +00:00
Serge Schneider
f2f919f0db
raspi-config modified to remove config variables rather than set default values when overclocking
2015-11-17 11:38:23 +00:00
Serge Schneider
61bb3c381f
Add wait for network option
2015-10-19 12:58:20 +01:00
Serge Schneider
11d3c8f85e
20150923 release
2015-09-24 14:03:13 +01:00
Serge Schneider
3f2491246d
Add rc_gui support
2015-09-18 18:00:07 +01:00
Serge Schneider
208f03e708
Fix boot to desktop handling
2015-06-03 18:07:15 +01:00
Serge Schneider
7bc93a08c4
Load i2c-dev when i2c is enabled
2015-06-03 15:12:40 +01:00
Serge Schneider
7f5b63c4d6
systemd compatibility
...
Add udevadm command to notify Xorg after change of keyboard layout - jojopi
Remove boot to scratch
2015-06-02 10:19:05 +01:00
jojopi
2598353839
preserve previous return status, ignoring udevadm
2015-05-27 08:23:36 +01:00
jojopi
fc1d1719be
add udevadm command to notify Xorg after change of keyboard layout
2015-05-25 23:19:35 +01:00
Alex Bradbury
4ee1fde44e
add pi2 overclock preset and ask to reboot after devicetree change
2015-01-31 20:18:38 +00:00
Alex Bradbury
2b91e57d41
add separate init script and tweak ondemand params
2015-01-29 23:58:41 +00:00
Alex Bradbury
cb06e5951d
Support new devicetree kernel
...
Patch from Phil Elwell (Raspberry Pi) - thanks!
2015-01-29 23:30:09 +00:00
Alex Bradbury
667f035157
add ability to switch on/off serial output
2014-09-02 17:25:58 +01:00
Alex Bradbury
2401980d1b
add option to unblacklist i2c
2014-09-01 11:44:45 +01:00
Alex Bradbury
be25afb612
add menu for switching audio output
2013-12-16 21:29:14 +00:00
Alex Bradbury
46aacb3003
when enabling camera, only set gpu mem if it is currently set below 128MiB
2013-12-16 21:09:43 +00:00
Alex Bradbury
b194c2e2cd
remove warning for turbo overclock, sd issues should be fixed
2013-12-16 21:00:11 +00:00
Alex Bradbury
9a741ded9f
fail boot to scratch/boot to desktop if pi user was removed
...
As reported in #30
2013-12-16 20:55:23 +00:00
Alex Bradbury
83aba18a70
handle Russian and Chinese languages set from NOOBS
...
Closes #33
2013-12-16 20:31:02 +00:00
Alex Bradbury
4e965838e9
add support for toggling blacklisting of the spi-bcm2708 kernel module
2013-09-25 18:56:38 +01:00
Alex Bradbury
84ae83fd7a
fix issue where placeholder fr_FR.UTF-8 wasn't replaced with DEBLANGUAGE
2013-09-25 18:16:19 +01:00
Alex Bradbury
fa44ce461e
bump version
2013-09-10 14:37:05 +01:00
Alex Bradbury
c8c9cf02d2
support boot to scratch and applying language/keyboard settings from noobs
2013-09-09 23:55:22 +01:00
Alex Bradbury
c6baad54c8
use start_x for camera enable rather than startx to reduce confusion
2013-05-25 17:15:01 +01:00
Alex Bradbury
f4259fa00e
fixes #18 : enable and disable camera prevents 16M split
...
The 'startx' parameter in config.txt (nothing to do with startx in Linux)
handles switching to start_cd if gpu_mem is set to 16M just fine, so let's
just use that.
2013-05-25 16:45:55 +01:00
Rob Bishop
e335ace8df
WT_HEIGHT changed to 17 for extra prettiness
2013-05-24 02:01:35 +01:00
Rob Bishop
fb7ce4c53f
Fixed height suitable for all displays. Scalable width so that more text is visible on widescreen displays
2013-05-24 01:51:37 +01:00
Alex Bradbury
e48f327a17
for now refuse to work on anything but trivial partitionings
...
In particular, refuse to work on NOOBS (parted doesn't like the partition
layout). Reassure users that if using NOOBS, the rootfs is already expanded.
2013-05-22 20:47:15 +01:00
Alex Bradbury
bcb12a3ddf
move overclock from advanced menu to main menu
2013-05-22 20:24:58 +01:00
Alex Bradbury
4673a0b824
use case to dispatch advanced menu
2013-05-22 20:21:24 +01:00
Alex Bradbury
c85396d754
use case to dispatch internationalisation menu functions
2013-05-22 20:17:32 +01:00
Alex Bradbury
3d725a80fa
use case to dispatch main menu
2013-05-22 20:11:00 +01:00
Alex Bradbury
c75429f06e
replace use of resize with direct calls to tput
...
Also choose a minimum size for the whiptail width and height: the ui just
doesn't work right when too small and drawing it at a sensible size means the
user can resize their terminal.
2013-05-22 19:37:56 +01:00
Alex Bradbury
0f14d65b1c
fix messed up indentation (we standardise on 2 spaces)
2013-05-22 17:44:15 +01:00
Rob Bishop
3daf906705
Updated in response to comments from popcornmix
2013-05-19 11:09:23 +01:00
Rob Bishop
c714b00b75
Edited layout and text to (hopefully) improve usability
2013-05-19 08:56:35 +01:00
Alex Bradbury
9a05d5c295
make expand_rootfs work even if root is not /dev/mmcblk0p2
...
The tool is still very cautious as to when it will work. Refuses to work if
/dev/root is not /dev/mmcblk0*
2013-05-20 19:45:01 +01:00
Alex Bradbury
e5296ca2d7
change cpufreq threshold to 70% rather than 95%
...
Dom says the system is more responsive, and there is agreement it is safe
enough.
2013-05-15 19:47:02 +01:00
Alex Bradbury
db470d9912
improve rastrack section
2013-05-10 12:03:00 +01:00
Alex Bradbury
7c1a6a66b0
fix typo and check for existence of start_x.elf
2013-05-10 11:50:13 +01:00
Alex Bradbury
e86cf23b47
fix lua invocation
2013-05-08 15:11:53 +01:00
Alex Bradbury
224e99b366
support enabling/disabling camera support
2013-05-08 09:57:36 +01:00
Alex Bradbury
d19d6295a3
indentation fixes
2013-05-07 14:37:14 +01:00
Alex Bradbury
ca224d0f6b
Merge pull request #14 from vpetersson/master
...
Adds ability to non-interactively run disk expansion with --expand-rootfs.
2013-05-07 05:25:57 -07:00
Alex Bradbury
3e463d1573
Merge pull request #15 from ryanteck/master
...
Adds Rastrack feature we discussed via Email.
2013-05-07 05:25:12 -07:00
Alex Bradbury
17a136ea49
Merge pull request #16 from OzBerryPi/feature/set-hostname
...
Adds the ability to set a unique hostname
2013-05-07 05:24:20 -07:00
Alex Bradbury
2f5bd70c5a
use -- in lua command line
2013-05-07 13:23:08 +01:00
Stonie
cb9bfa026a
Adds the ability to set the hostname
2013-04-26 18:43:03 +10:00
Ryan Walmsley
ae17b14e4b
Finished Rastrack Addition Possibility
2013-04-05 14:05:06 +01:00
Ryan Walmsley
e6bd8741be
Rastrack v2
2013-04-05 13:43:00 +01:00
Ryan Walmsley
0f5bbc6cb0
Rastrack
2013-04-05 13:37:56 +01:00
Ryan Walmsley
d0acb97e49
First part of rastrack addition
2013-04-05 13:36:33 +01:00
Viktor Petersson
3320564bd2
Adds ability to run root-fs expansion non-interactively by passing the argument --expand-rootfs.
...
This is very useful if you need to implement an automatic disk space expansion.
2013-03-26 22:58:32 +01:00
Alex Bradbury
9199bf25ea
avoid bug if user puts in negative gpu mem
2012-10-29 15:58:29 +00:00
Alex Bradbury
91ed792303
disable command-line options for now
2012-10-28 21:14:01 +00:00
Alex Bradbury
51095a837a
complain if user tries to user boot to desktop without lightdm installed
2012-10-28 21:03:46 +00:00
Alex Bradbury
a7a7b12ad0
update overclock options
...
Due to some people reporting SD card corruption, back off on overclocking
core_freq for all overclock options other than turbo. For turbo, bump SDRAM
overclock to 600 and warn the user that some people have reported SD card
corruption.
2012-10-28 20:54:10 +00:00
Alex Bradbury
d65377afc7
support new gpu_mem config.txt option for setting memory split
2012-10-28 20:38:27 +00:00
Alex Bradbury
a8429795bf
add init script when overclocking that allows the user to opt out on boot
...
Current kernel builds default to the powersave cpufreq governor, with the
intention that this is changed to 'ondemand' after boot. When the user sets
overclock in raspi-config, an init script is installed which does this switch,
but only does it if it doesn't detect a shift key is held down. This means the
user can still boot the system if they set an overclock setting that is higher
than their device can manage.
2012-09-18 11:57:00 +01:00
Alex Bradbury
c5e1966418
add overclocking options
2012-09-17 11:28:39 +01:00
Alex Bradbury
f3452fd387
reload raspi-config after a user-initiated update
2012-09-16 19:47:22 +01:00
James Hewitt
1962a44937
Add command-line options for non-interative use
2012-08-20 21:53:15 +01:00
Alex Bradbury
8f792cc4e4
adjust last commit for personal taste
2012-08-15 20:41:11 +01:00
Mircea Vutcovici
e69aa4d1fb
Added 240/16 memory split, added display for current memory split configuration.
2012-08-09 12:54:01 -04:00
Alex Bradbury
274b280ff4
change 'OK' to 'Select'
2012-07-15 19:46:49 +01:00
Alex Bradbury
8afc286e8b
add ability to try to upgrade raspi-config
2012-07-15 18:40:06 +01:00
Alex Bradbury
fa1d2c3708
get rid of 'finish' in raspi-config
2012-07-15 18:32:30 +01:00
Alex Bradbury
c678dd82ff
suggest sudo raspi-config if script is not run as root
2012-07-15 18:16:02 +01:00
Alex Bradbury
37d02c865f
sync after changing memory split
2012-07-14 00:59:58 +01:00
Alex Bradbury
e8abad0f52
add ability to configure automatic login to desktop on boot
2012-07-13 22:52:06 +01:00
Alex Bradbury
2da99a7c81
improve wrapping for info text box in raspi-config
2012-07-13 17:13:30 +01:00
Alex Bradbury
e4e56bf1fb
be more intelligent about inserting config options
...
If a config option is already in the file but commented out, modify that line
rather than inserting a new one.
2012-07-13 17:01:48 +01:00
Alex Bradbury
053c55300b
fix ssh config
...
How did I not commit this yet?
2012-07-04 16:13:28 +01:00
Alex Bradbury
2aaead1f50
*really* get keyboard-setup/keyboard-configuration right
2012-06-17 21:56:33 +01:00
Alex Bradbury
27bb12eec0
avoid race condition with initial ssh key generation on first boot
2012-06-17 15:16:05 +01:00
Alex Bradbury
f49ec71c75
missed an s/keyboard-setup/keyboard-configuration/
2012-06-17 15:02:17 +01:00
Alex Bradbury
7095f0e490
Merge pull request #1 from Alkarex/patch-1
...
keyboard-configuration: correction of dpkg-reconfigure and position in the menu
2012-06-17 07:01:22 -07:00
Alex Bradbury
265e7a5326
fix exit status in case of error
2012-06-17 13:43:38 +01:00
Alexandre Alapetite
e7e32a424c
keyboard-configuration: correction of dpkg-reconfigure instruction, and positioned before password change
2012-06-17 01:06:12 +03:00
Alex Bradbury
e45b6d421f
Initial commit
2012-06-10 21:32:01 +01:00
