From 7cc2ada25d6d9bba3ebc4cf0cc6bb408526ba442 Mon Sep 17 00:00:00 2001 From: Takumi Sueda Date: Sun, 15 May 2022 01:42:08 +0900 Subject: [PATCH] Get rid of unused commands --- raspi-config | 2611 +------------------------------------------------- 1 file changed, 23 insertions(+), 2588 deletions(-) diff --git a/raspi-config b/raspi-config index 25f8e4e..08fe15f 100755 --- a/raspi-config +++ b/raspi-config @@ -1,5 +1,6 @@ #!/bin/sh -# Part of raspi-config https://github.com/RPi-Distro/raspi-config +# Part of brain-config https://github.com/brain-hackers/brain-config +# Forked from raspi-config https://github.com/RPi-Distro/raspi-config # # See LICENSE file for copyright and license details @@ -7,6 +8,7 @@ INTERACTIVE=True ASK_TO_REBOOT=0 BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf CONFIG=/boot/config.txt +# TODO: erase these envs USER=${SUDO_USER:-$(who -m | awk '{ print $1 }')} @@ -25,106 +27,6 @@ else CMDLINE=/proc/cmdline fi -# tests for Pi 1, 2 and 0 all test for specific boards... - -is_pione() { - if grep -q "^Revision\s*:\s*00[0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo; then - return 0 - elif grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[0-36][0-9a-fA-F]$" /proc/cpuinfo ; then - return 0 - else - return 1 - fi -} - -is_pitwo() { - grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]04[0-9a-fA-F]$" /proc/cpuinfo - return $? -} - -is_pizero() { - grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[9cC][0-9a-fA-F]$" /proc/cpuinfo - return $? -} - -# ...while tests for Pi 3 and 4 just test processor type, so will also find CM3, CM4, Zero 2 etc. - -is_pithree() { - grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F]2[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo - return $? -} - -is_pifour() { - grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F]3[0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo - return $? -} - -get_pi_type() { - if is_pione; then - echo 1 - elif is_pitwo; then - echo 2 - elif is_pithree; then - echo 3 - elif is_pifour; then - echo 4 - elif is_pizero; then - echo 0 - else - echo -1 - fi -} - -is_live() { - grep -q "boot=live" $CMDLINE - return $? -} - -is_ssh() { - if pstree -p | egrep --quiet --extended-regexp ".*sshd.*\($$\)"; then - return 0 - else - return 1 - fi -} - -is_kms() { - if grep -s -q okay /proc/device-tree/soc/v3d@*/status \ - /proc/device-tree/soc/firmwarekms@*/status \ - /proc/device-tree/v3dbus/v3d@*/status; then - return 0 - else - return 1 - fi -} - -is_pulseaudio() { - PS=$(ps ax) - echo "$PS" | grep -q pulseaudio - return $? -} - -has_analog() { - if [ $(get_leds) -eq -1 ] ; then - return 0 - else - return 1 - fi -} - -is_installed() { - if [ "$(dpkg -l "$1" 2> /dev/null | tail -n 1 | cut -d ' ' -f 1)" != "ii" ]; then - return 1 - else - return 0 - fi -} - -deb_ver () { - ver=`cat /etc/debian_version | cut -d . -f 1` - echo $ver -} - calc_wt_size() { # NOTE: it's tempting to redirect stderr to /dev/null, so supress error # output from tput. However in this case, tput detects neither stdout or @@ -144,7 +46,7 @@ calc_wt_size() { do_about() { whiptail --msgbox "\ This tool provides a straightforward way of doing initial -configuration of the Raspberry Pi. Although it can be run +configuration of the SHARP Brain. Although it can be run at any time, some of the options may have difficulties if you have heavily customised your installation. @@ -153,25 +55,6 @@ $(dpkg -s raspi-config 2> /dev/null | grep Version)\ return 0 } -get_can_expand() { - ROOT_PART="$(findmnt / -o source -n)" - ROOT_DEV="/dev/$(lsblk -no pkname "$ROOT_PART")" - - PART_NUM="$(echo "$ROOT_PART" | grep -o "[[:digit:]]*$")" - - if [ "$PART_NUM" -ne 2 ]; then - echo 1 - exit - fi - - LAST_PART_NUM=$(parted "$ROOT_DEV" -ms unit s p | tail -n 1 | cut -f 1 -d:) - if [ "$LAST_PART_NUM" -ne "$PART_NUM" ]; then - echo 1 - exit - fi - echo 0 -} - do_expand_rootfs() { ROOT_PART="$(findmnt / -o source -n)" ROOT_DEV="/dev/$(lsblk -no pkname "$ROOT_PART")" @@ -246,302 +129,12 @@ EOF fi } -set_config_var() { - lua - "$1" "$2" "$3" < "$3.bak" -local key=assert(arg[1]) -local value=assert(arg[2]) -local fn=assert(arg[3]) -local file=assert(io.open(fn)) -local made_change=false -for line in file:lines() do - if line:match("^#?%s*"..key.."=.*$") then - line=key.."="..value - made_change=true - end - print(line) -end - -if not made_change then - print(key.."="..value) -end -EOF -mv "$3.bak" "$3" -} - -clear_config_var() { - lua - "$1" "$2" < "$2.bak" -local key=assert(arg[1]) -local fn=assert(arg[2]) -local file=assert(io.open(fn)) -for line in file:lines() do - if line:match("^%s*"..key.."=.*$") then - line="#"..line - end - print(line) -end -EOF -mv "$2.bak" "$2" -} - -get_config_var() { - lua - "$1" "$2" < /dev/null | grep margin | rev | cut -d ' ' -f 1 | rev) - if [ -z $RES ] ; then - echo 1 - elif [ $RES -eq 0 ] ; then - echo 1 - else - echo 0 - fi -} - -do_overscan_kms() { - if [ "$INTERACTIVE" = True ]; then - NDEVS=$(xrandr -q | grep -c connected) - if [ $NDEVS -gt 1 ] ; then - DEV=$(whiptail --menu "Select the output for which overscan compensation is to be set" 20 60 10 "1" "HDMI-1" "2" "HDMI-2" 3>&1 1>&2 2>&3) - if [ $? -eq 1 ] ; then - return - fi - else - DEV=1 - fi - if [ $(get_overscan_kms $DEV) -eq 1 ]; then - DEFAULT=--defaultno - else - DEFAULT= - fi - if whiptail --yesno "Would you like to enable overscan compensation for HDMI-$DEV?" $DEFAULT 20 60 2 ; then - PIX=16 - STATUS="enabled" - else - PIX=0 - STATUS="disabled" - fi - else - DEV=$1 - if [ $2 -eq 1 ] ; then - PIX=0 - else - PIX=16 - fi - fi - xrandr --output HDMI-$DEV --set "left margin" $PIX --set "right margin" $PIX --set "top margin" $PIX --set "bottom margin" $PIX - # hack to force reload when not using mutter - if ! ps ax | grep -v grep | grep -q " mutter" ; then - xrandr --output HDMI-$DEV --reflect x - xrandr --output HDMI-$DEV --reflect normal - fi - sed $CONFIG -i -e "s/^overscan_/#overscan_/" - set_config_var disable_overscan 1 $CONFIG - if [ -e /usr/share/ovscsetup.sh ] ; then - if grep "HDMI-$DEV" /usr/share/ovscsetup.sh 2> /dev/null | grep -q margin ; then - sed /usr/share/ovscsetup.sh -i -e "s/xrandr --output HDMI-$DEV.*margin.*/xrandr --output HDMI-$DEV --set \"left margin\" $PIX --set \"right margin\" $PIX --set \"top margin\" $PIX --set \"bottom margin\" $PIX/" - else - echo "xrandr --output HDMI-$DEV --set \"left margin\" $PIX --set \"right margin\" $PIX --set \"top margin\" $PIX --set \"bottom margin\" $PIX" >> /usr/share/ovscsetup.sh - fi - else - echo "#!/bin/sh\nxrandr --output HDMI-$DEV --set \"left margin\" $PIX --set \"right margin\" $PIX --set \"top margin\" $PIX --set \"bottom margin\" $PIX" > /usr/share/ovscsetup.sh - fi - if ! grep -q ovscsetup /usr/share/dispsetup.sh 2> /dev/null ; then - sed /usr/share/dispsetup.sh -i -e "s#exit#if [ -e /usr/share/ovscsetup.sh ] ; then\n. /usr/share/ovscsetup.sh\nfi\nexit#" - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Display overscan compensation for HDMI-$DEV is $STATUS" 20 60 1 - fi -} - -get_blanking() { - if ! [ -f "/etc/X11/xorg.conf.d/10-blanking.conf" ]; then - echo 0 - else - echo 1 - fi -} - -# shellcheck disable=SC2120 -do_blanking() { - DEFAULT=--defaultno - CURRENT=0 - if [ "$(get_blanking)" -eq 0 ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - if [ "$(dpkg -l xscreensaver | tail -n 1 | cut -d ' ' -f 1)" = "ii" ]; then - whiptail --msgbox "Warning: xscreensaver is installed may override raspi-config settings" 20 60 2 - fi - whiptail --yesno "Would you like to enable screen blanking?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ "$RET" -eq "$CURRENT" ]; then - ASK_TO_REBOOT=1 - fi - rm -f /etc/X11/xorg.conf.d/10-blanking.conf - sed -i '/^\o033/d' /etc/issue - if [ "$RET" -eq 0 ] ; then - STATUS=enabled - elif [ "$RET" -eq 1 ]; then - mkdir -p /etc/X11/xorg.conf.d/ - cp /usr/share/raspi-config/10-blanking.conf /etc/X11/xorg.conf.d/ - printf "\\033[9;0]" >> /etc/issue - STATUS=disabled - else - return "$RET" - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Screen blanking is $STATUS" 20 60 1 - fi -} - -get_pixdub() { - if is_pi && ! is_kms; then - FBW=$(get_config_var framebuffer_width $CONFIG) - if [ $FBW -eq 0 ]; then - echo 1 - else - echo 0 - fi - else - echo 1 - fi -} - -is_number() { - case $1 in - ''|*[!0-9]*) return 0 ;; - *) return 1 ;; - esac -} - -do_pixdub() { - DEFAULT=--defaultno - CURRENT=0 - if [ $(get_pixdub) -eq 0 ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like to enable pixel doubling?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if is_pi && ! is_kms; then - if [ $RET -eq 0 ] ; then - XVAL=$(xrandr 2>&1 | grep current | cut -f2 -d, | cut -f3 -d' ') - YVAL=$(xrandr 2>&1 | grep current | cut -f2 -d, | cut -f5 -d' ') - if is_number $XVAL || is_number $YVAL ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Could not read current screen dimensions - unable to enable pixel doubling" 20 60 1 - fi - return 1 - fi - NEWX=`expr $XVAL / 2` - NEWY=`expr $YVAL / 2` - set_config_var framebuffer_width $NEWX $CONFIG - set_config_var framebuffer_height $NEWY $CONFIG - set_config_var scaling_kernel 8 $CONFIG - STATUS=enabled - elif [ $RET -eq 1 ]; then - clear_config_var framebuffer_width $CONFIG - clear_config_var framebuffer_height $CONFIG - clear_config_var scaling_kernel $CONFIG - STATUS=disabled - else - return $RET - fi - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Pixel doubling is $STATUS" 20 60 1 - fi -} - do_change_pass() { whiptail --msgbox "You will now be asked to enter a new password for the $USER user" 20 60 1 passwd $USER && whiptail --msgbox "Password changed successfully" 20 60 1 } -do_configure_keyboard() { - printf "Reloading keymap. This may take a short while\n" - if [ "$INTERACTIVE" = True ]; then - dpkg-reconfigure keyboard-configuration - else - local KEYMAP="$1" - sed -i /etc/default/keyboard -e "s/^XKBLAYOUT.*/XKBLAYOUT=\"$KEYMAP\"/" - dpkg-reconfigure -f noninteractive keyboard-configuration - fi - invoke-rc.d keyboard-setup start - setsid sh -c 'exec setupcon -k --force <> /dev/tty1 >&0 2>&1' - udevadm trigger --subsystem-match=input --action=change - return 0 -} - do_change_locale() { if [ "$INTERACTIVE" = True ]; then dpkg-reconfigure locales @@ -675,157 +268,6 @@ No other symbols, punctuation characters, or blank spaces are permitted.\ fi } -do_memory_split() { # Memory Split - if [ -e /boot/start_cd.elf ]; then - # New-style memory split setting - ## get current memory split from /boot/config.txt - arm=$(vcgencmd get_mem arm | cut -d '=' -f 2 | cut -d 'M' -f 1) - gpu=$(vcgencmd get_mem gpu | cut -d '=' -f 2 | cut -d 'M' -f 1) - tot=$(($arm+$gpu)) - if [ $tot -gt 512 ]; then - CUR_GPU_MEM=$(get_config_var gpu_mem_1024 $CONFIG) - elif [ $tot -gt 256 ]; then - CUR_GPU_MEM=$(get_config_var gpu_mem_512 $CONFIG) - else - CUR_GPU_MEM=$(get_config_var gpu_mem_256 $CONFIG) - fi - if [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ]; then - CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG) - fi - [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ] && CUR_GPU_MEM=64 - ## ask users what gpu_mem they want - if [ "$INTERACTIVE" = True ]; then - NEW_GPU_MEM=$(whiptail --inputbox "How much memory (MB) should the GPU have? e.g. 16/32/64/128/256" \ - 20 70 -- "$CUR_GPU_MEM" 3>&1 1>&2 2>&3) - else - NEW_GPU_MEM=$1 - true - fi - if [ $? -eq 0 ]; then - if [ $(get_config_var gpu_mem_1024 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_512 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_256 $CONFIG) != "0" ]; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Device-specific memory settings were found. These have been cleared." 20 60 2 - fi - clear_config_var gpu_mem_1024 $CONFIG - clear_config_var gpu_mem_512 $CONFIG - clear_config_var gpu_mem_256 $CONFIG - fi - set_config_var gpu_mem "$NEW_GPU_MEM" $CONFIG - ASK_TO_REBOOT=1 - fi - else # Old firmware so do start.elf renaming - get_current_memory_split - MEMSPLIT=$(whiptail --menu "Set memory split.\n$MEMSPLIT_DESCRIPTION" 20 60 10 \ - "240" "240MiB for ARM, 16MiB for VideoCore" \ - "224" "224MiB for ARM, 32MiB for VideoCore" \ - "192" "192MiB for ARM, 64MiB for VideoCore" \ - "128" "128MiB for ARM, 128MiB for VideoCore" \ - 3>&1 1>&2 2>&3) - if [ $? -eq 0 ]; then - set_memory_split ${MEMSPLIT} - ASK_TO_REBOOT=1 - fi - fi -} - -get_current_memory_split() { - AVAILABLE_SPLITS="128 192 224 240" - MEMSPLIT_DESCRIPTION="" - for SPLIT in $AVAILABLE_SPLITS;do - if [ -e /boot/arm${SPLIT}_start.elf ] && cmp /boot/arm${SPLIT}_start.elf /boot/start.elf >/dev/null 2>&1;then - CURRENT_MEMSPLIT=$SPLIT - MEMSPLIT_DESCRIPTION="Current: ${CURRENT_MEMSPLIT}MiB for ARM, $((256 - $CURRENT_MEMSPLIT))MiB for VideoCore" - break - fi - done -} - -set_memory_split() { - cp -a /boot/arm${1}_start.elf /boot/start.elf - sync -} - -do_overclock() { - if ! is_pione && ! is_pitwo; then - whiptail --msgbox "Only Pi 1 or Pi 2 can be overclocked with this tool." 20 60 2 - return 1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "\ -Be aware that overclocking may reduce the lifetime of your -Raspberry Pi. If overclocking at a certain level causes -system instability, try a more modest overclock. Hold down -shift during boot to temporarily disable overclock. -See https://www.raspberrypi.org/documentation/configuration/config-txt/overclocking.md for more information.\ -" 20 70 1 - if is_pione; then - OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \ - "None" "700MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \ - "Modest" "800MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \ - "Medium" "900MHz ARM, 250MHz core, 450MHz SDRAM, 2 overvolt" \ - "High" "950MHz ARM, 250MHz core, 450MHz SDRAM, 6 overvolt" \ - "Turbo" "1000MHz ARM, 500MHz core, 600MHz SDRAM, 6 overvolt" \ - 3>&1 1>&2 2>&3) - elif is_pitwo; then - OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \ - "None" "900MHz ARM, 250MHz core, 450MHz SDRAM, 0 overvolt" \ - "High" "1000MHz ARM, 500MHz core, 500MHz SDRAM, 2 overvolt" \ - 3>&1 1>&2 2>&3) - fi - else - OVERCLOCK=$1 - true - fi - if [ $? -eq 0 ]; then - case "$OVERCLOCK" in - None) - clear_overclock - ;; - Modest) - set_overclock Modest 800 250 400 0 - ;; - Medium) - set_overclock Medium 900 250 450 2 - ;; - High) - if is_pione; then - set_overclock High 950 250 450 6 - else - set_overclock High 1000 500 500 2 - fi - ;; - Turbo) - set_overclock Turbo 1000 500 600 6 - ;; - *) - whiptail --msgbox "Programmer error, unrecognised overclock preset" 20 60 2 - return 1 - ;; - esac - ASK_TO_REBOOT=1 - fi -} - -set_overclock() { - set_config_var arm_freq $2 $CONFIG && - set_config_var core_freq $3 $CONFIG && - set_config_var sdram_freq $4 $CONFIG && - set_config_var over_voltage $5 $CONFIG && - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Set overclock to preset '$1'" 20 60 2 - fi -} - -clear_overclock () { - clear_config_var arm_freq $CONFIG && - clear_config_var core_freq $CONFIG && - clear_config_var sdram_freq $CONFIG && - clear_config_var over_voltage $CONFIG && - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Set overclock to preset 'None'" 20 60 2 - fi -} - get_ssh() { if service ssh status | grep -q inactive; then echo 1 @@ -868,223 +310,6 @@ do_ssh() { fi } -get_vnc() { - if systemctl status vncserver-x11-serviced.service | grep -q -w active; then - echo 0 - else - echo 1 - fi -} - -do_vnc() { - DEFAULT=--defaultno - if [ $(get_vnc) -eq 0 ]; then - DEFAULT= - fi - APT_GET_FLAGS="" - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the VNC Server to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - APT_GET_FLAGS="-y" - fi - if [ $RET -eq 0 ]; then - if is_installed realvnc-vnc-server || apt-get install "$APT_GET_FLAGS" realvnc-vnc-server; then - systemctl enable vncserver-x11-serviced.service && - systemctl start vncserver-x11-serviced.service && - STATUS=enabled - else - return 1 - fi - elif [ $RET -eq 1 ]; then - if is_installed realvnc-vnc-server; then - systemctl disable vncserver-x11-serviced.service - systemctl stop vncserver-x11-serviced.service - fi - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The VNC Server is $STATUS" 20 60 1 - fi -} - -get_spi() { - if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*spi(=(on|true|yes|1))?(,.*)?$" $CONFIG; then - echo 0 - else - echo 1 - fi -} - -do_spi() { - DEFAULT=--defaultno - if [ $(get_spi) -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the SPI interface to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - SETTING=on - STATUS=enabled - elif [ $RET -eq 1 ]; then - SETTING=off - STATUS=disabled - else - return $RET - fi - - set_config_var dtparam=spi $SETTING $CONFIG && - if ! [ -e $BLACKLIST ]; then - touch $BLACKLIST - fi - sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*spi[-_]bcm2708\)/#\1/" - dtparam spi=$SETTING - - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The SPI interface is $STATUS" 20 60 1 - fi -} - -get_i2c() { - if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*i2c(_arm)?(=(on|true|yes|1))?(,.*)?$" $CONFIG; then - echo 0 - else - echo 1 - fi -} - -do_i2c() { - DEFAULT=--defaultno - if [ $(get_i2c) -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the ARM I2C interface to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - SETTING=on - STATUS=enabled - elif [ $RET -eq 1 ]; then - SETTING=off - STATUS=disabled - else - return $RET - fi - - set_config_var dtparam=i2c_arm $SETTING $CONFIG && - if ! [ -e $BLACKLIST ]; then - touch $BLACKLIST - fi - sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*i2c[-_]bcm2708\)/#\1/" - sed /etc/modules -i -e "s/^#[[:space:]]*\(i2c[-_]dev\)/\1/" - if ! grep -q "^i2c[-_]dev" /etc/modules; then - printf "i2c-dev\n" >> /etc/modules - fi - dtparam i2c_arm=$SETTING - modprobe i2c-dev - - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The ARM I2C interface is $STATUS" 20 60 1 - fi -} - -get_serial() { - if grep -q -E "console=(serial0|ttyAMA0|ttyS0)" $CMDLINE ; then - echo 0 - else - echo 1 - fi -} - -get_serial_hw() { - if grep -q -E "^enable_uart=1" $CONFIG ; then - echo 0 - elif grep -q -E "^enable_uart=0" $CONFIG ; then - echo 1 - elif [ -e /dev/serial0 ] ; then - echo 0 - else - echo 1 - fi -} - -do_serial() { - DEFAULTS=--defaultno - DEFAULTH=--defaultno - CURRENTS=0 - CURRENTH=0 - if [ $(get_serial) -eq 0 ]; then - DEFAULTS= - CURRENTS=1 - fi - if [ $(get_serial_hw) -eq 0 ]; then - DEFAULTH= - CURRENTH=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like a login shell to be accessible over serial?" $DEFAULTS 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENTS ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - if grep -q "console=ttyAMA0" $CMDLINE ; then - if [ -e /proc/device-tree/aliases/serial0 ]; then - sed -i $CMDLINE -e "s/console=ttyAMA0/console=serial0/" - fi - elif ! grep -q "console=ttyAMA0" $CMDLINE && ! grep -q "console=serial0" $CMDLINE ; then - if [ -e /proc/device-tree/aliases/serial0 ]; then - sed -i $CMDLINE -e "s/root=/console=serial0,115200 root=/" - else - sed -i $CMDLINE -e "s/root=/console=ttyAMA0,115200 root=/" - fi - fi - set_config_var enable_uart 1 $CONFIG - SSTATUS=enabled - HSTATUS=enabled - elif [ $RET -eq 1 ] || [ $RET -eq 2 ]; then - sed -i $CMDLINE -e "s/console=ttyAMA0,[0-9]\+ //" - sed -i $CMDLINE -e "s/console=serial0,[0-9]\+ //" - SSTATUS=disabled - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the serial port hardware to be enabled?" $DEFAULTH 20 60 2 - RET=$? - else - RET=$((2-$RET)) - fi - if [ $RET -eq $CURRENTH ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - set_config_var enable_uart 1 $CONFIG - HSTATUS=enabled - elif [ $RET -eq 1 ]; then - set_config_var enable_uart 0 $CONFIG - HSTATUS=disabled - else - return $RET - fi - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The serial login shell is $SSTATUS\nThe serial interface is $HSTATUS" 20 60 1 - fi -} - disable_raspi_config_at_boot() { if [ -e /etc/profile.d/raspi-config.sh ]; then rm -f /etc/profile.d/raspi-config.sh @@ -1095,981 +320,6 @@ disable_raspi_config_at_boot() { fi } -get_boot_cli() { - if [ "$(systemctl get-default)" = graphical.target ] && systemctl is-enabled lightdm > /dev/null 2>&1; then - echo 1 - else - echo 0 - fi -} - -get_autologin() { - if [ $(get_boot_cli) -eq 0 ]; then - # booting to CLI - if [ -e /etc/systemd/system/getty@tty1.service.d/autologin.conf ] ; then - echo 0 - else - echo 1 - fi - else - # booting to desktop - check the autologin for lightdm - if grep -q "^autologin-user=" /etc/lightdm/lightdm.conf ; then - echo 0 - else - echo 1 - fi - fi -} - -get_pi4video () { - if grep -q "^hdmi_enable_4kp60=1" $CONFIG ; then - echo 1 - elif grep -q "^enable_tvout=1" $CONFIG ; then - echo 2 - else - echo 0 - fi -} - -do_pi4video() { - if ! is_pifour ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "This option can only be used on a Pi 4" 20 60 1 - fi - return 1 - fi - CURRENT=$(get_pi4video) - if [ "$INTERACTIVE" = True ]; then - VIDOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Pi 4 Video Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ - "V1 Enable 4Kp60 HDMI" "Enable 4Kp60 resolution on HDMI0" \ - "V2 Enable composite " "Enable composite video output (disables HDMI)" \ - "V3 Default" "Disable 4Kp60 HDMI and composite video" \ - 3>&1 1>&2 2>&3) - else - VIDOPT=$1 - true - fi - if [ $? -eq 0 ]; then - case "$VIDOPT" in - V1*) - sed $CONFIG -i -e "s/^#\?hdmi_enable_4kp60=.*/hdmi_enable_4kp60=1/" - sed $CONFIG -i -e "s/^enable_tvout=/#enable_tvout=/" - if ! grep -q "hdmi_enable_4kp60" $CONFIG ; then - sed $CONFIG -i -e "\$ahdmi_enable_4kp60=1" - fi - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d.*/dtoverlay=vc4-kms-v3d/" - STATUS="4Kp60 is enabled on HDMI0" - OPT=1 - ;; - V2*) - if whiptail --yesno "If composite video is enabled, both HDMI outputs will be disabled, and unless a composite monitor is connected, no video output will be available.\n\nAre you sure you want to enable composite and disable HDMI?" 20 60 2 --defaultno ; then - sed $CONFIG -i -e "s/^#\?enable_tvout=.*/enable_tvout=1/" - sed $CONFIG -i -e "s/^hdmi_enable_4kp60=/#hdmi_enable_4kp60=/" - if ! grep -q "enable_tvout" $CONFIG ; then - sed $CONFIG -i -e "\$aenable_tvout=1" - fi - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d.*/dtoverlay=vc4-kms-v3d,composite/" - STATUS="Composite video is enabled. HDMI is disabled." - OPT=2 - else - STATUS="Video output settings unchanged" - OPT=$CURRENT - fi - ;; - V3*) - sed $CONFIG -i -e "s/^hdmi_enable_4kp60=/#hdmi_enable_4kp60=/" - sed $CONFIG -i -e "s/^enable_tvout=/#enable_tvout=/" - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d.*/dtoverlay=vc4-kms-v3d/" - STATUS="Both HDMI ports set to defaults - 4Kp60 and composite disabled" - OPT=0 - ;; - *) - whiptail --msgbox "Programmer error, unrecognised video option" 20 60 2 - return 1 - ;; - esac - if [ $OPT -ne $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "$STATUS" 20 60 1 - fi - fi -} - -get_composite() { - if grep -q "^dtoverlay=vc4-kms-v3d,composite" $CONFIG ; then - echo 0 - else - echo 1 - fi -} - -do_composite() { - CURRENT=$(get_composite) - DEFAULT=--defaultno - if [ $CURRENT -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like composite video output to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d.*/dtoverlay=vc4-kms-v3d,composite/" - STATUS=enabled - elif [ $RET -eq 1 ]; then - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d.*/dtoverlay=vc4-kms-v3d/" - STATUS=disabled - else - return $RET - fi - if [ $RET -ne $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Composite video output is $STATUS" 20 60 1 - fi -} - -get_leds () { - if grep -q "\\[actpwr\\]" /sys/class/leds/led0/trigger ; then - echo 0 - elif grep -q "\\[default-on\\]" /sys/class/leds/led0/trigger ; then - echo 1 - else - echo -1 - fi -} - -do_leds() { - CURRENT=$(get_leds) - if [ $CURRENT -eq -1 ] ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The LED behaviour cannot be changed on this model of Raspberry Pi" 20 60 1 - fi - return 1 - fi - DEFAULT=--defaultno - if [ $CURRENT -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the power LED to flash during disk activity?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - LEDSET="actpwr" - STATUS="flash for disk activity" - elif [ $RET -eq 1 ]; then - LEDSET="default-on" - STATUS="be on constantly" - else - return $RET - fi - sed $CONFIG -i -e "s/dtparam=act_led_trigger=.*/dtparam=act_led_trigger=$LEDSET/" - if ! grep -q "dtparam=act_led_trigger" $CONFIG ; then - sed $CONFIG -i -e "\$adtparam=act_led_trigger=$LEDSET" - fi - echo $LEDSET | tee /sys/class/leds/led0/trigger > /dev/null - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The power LED will $STATUS" 20 60 1 - fi -} - -get_fan() { - if grep -q ^dtoverlay=gpio-fan $CONFIG ; then - echo 0 - else - echo 1 - fi -} - -get_fan_gpio() { - GPIO=$(grep ^dtoverlay=gpio-fan $CONFIG | cut -d, -f2 | cut -d= -f2) - if [ -z $GPIO ]; then - GPIO=14 - fi - echo $GPIO -} - -get_fan_temp() { - TEMP=$(grep ^dtoverlay=gpio-fan $CONFIG | cut -d, -f3 | cut -d= -f2) - if [ -z $TEMP ]; then - TEMP=80000 - fi - echo $(( $TEMP / 1000 )) -} - -do_fan() { - GNOW=$(get_fan_gpio) - TNOW=$(get_fan_temp) - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like to enable fan temperature control?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ] ; then - if [ "$INTERACTIVE" = True ]; then - GPIO=$(whiptail --inputbox "To which GPIO is the fan connected?" 20 60 "$GNOW" 3>&1 1>&2 2>&3) - else - if [ -z $2 ]; then - GPIO=14 - else - GPIO=$2 - fi - fi - if ! [ $? -eq 0 ] ; then - return 0 - fi - if ! echo "$GPIO" | grep -q ^[[:digit:]]*$ ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "GPIO must be a number between 2 and 27" 20 60 1 - fi - return 1 - fi - if [ "$GPIO" -lt 2 ] || [ "$GPIO" -gt 27 ] ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "GPIO must be a number between 2 and 27" 20 60 1 - fi - return 1 - fi - if [ "$INTERACTIVE" = True ]; then - TIN=$(whiptail --inputbox "At what temperature in degrees should the fan turn on?" 20 60 "$TNOW" 3>&1 1>&2 2>&3) - else - if [ -z $3 ]; then - TIN=80 - else - TIN=$3 - fi - fi - if ! [ $? -eq 0 ] ; then - return 0 - fi - if ! echo "$TIN" | grep -q ^[[:digit:]]*$ ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Temperature must be a number between 60 and 120" 20 60 1 - fi - return 1 - fi - if [ "$TIN" -lt 60 ] || [ "$TIN" -gt 120 ] ; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Temperature must be a number between 60 and 120" 20 60 1 - fi - return 1 - fi - TEMP=$(( $TIN * 1000 )) - fi - if [ $RET -eq 0 ]; then - if ! grep -q "dtoverlay=gpio-fan" $CONFIG ; then - if ! tail -1 $CONFIG | grep -q "\\[all\\]" ; then - sed $CONFIG -i -e "\$a[all]" - fi - sed $CONFIG -i -e "\$adtoverlay=gpio-fan,gpiopin=$GPIO,temp=$TEMP" - else - sed $CONFIG -i -e "s/^.*dtoverlay=gpio-fan.*/dtoverlay=gpio-fan,gpiopin=$GPIO,temp=$TEMP/" - fi - ASK_TO_REBOOT=1 - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The fan on GPIO $GPIO is enabled and will turn on at $TIN degrees" 20 60 1 - fi - else - if grep -q "^dtoverlay=gpio-fan" $CONFIG ; then - ASK_TO_REBOOT=1 - fi - sed $CONFIG -i -e "/^.*dtoverlay=gpio-fan.*/d" - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The fan is disabled" 20 60 1 - fi - fi -} - -do_boot_behaviour() { - if [ "$INTERACTIVE" = True ]; then - BOOTOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ - "B1 Console" "Text console, requiring user to login" \ - "B2 Console Autologin" "Text console, automatically logged in as '$USER' user" \ - "B3 Desktop" "Desktop GUI, requiring user to login" \ - "B4 Desktop Autologin" "Desktop GUI, automatically logged in as '$USER' user" \ - 3>&1 1>&2 2>&3) - else - BOOTOPT=$1 - true - fi - if [ $? -eq 0 ]; then - case "$BOOTOPT" in - B1*) - systemctl --quiet set-default multi-user.target - rm -f /etc/systemd/system/getty@tty1.service.d/autologin.conf - ;; - B2*) - systemctl --quiet set-default multi-user.target - cat > /etc/systemd/system/getty@tty1.service.d/autologin.conf << EOF -[Service] -ExecStart= -ExecStart=-/sbin/agetty --autologin $USER --noclear %I \$TERM -EOF - ;; - B3*) - if [ -e /etc/init.d/lightdm ]; then - systemctl --quiet set-default graphical.target - rm -f /etc/systemd/system/getty@tty1.service.d/autologin.conf - sed /etc/lightdm/lightdm.conf -i -e "s/^autologin-user=.*/#autologin-user=/" - disable_raspi_config_at_boot - else - whiptail --msgbox "Do 'sudo apt-get install lightdm' to allow configuration of boot to desktop" 20 60 2 - return 1 - fi - ;; - B4*) - if [ -e /etc/init.d/lightdm ]; then - systemctl --quiet set-default graphical.target - cat > /etc/systemd/system/getty@tty1.service.d/autologin.conf << EOF -[Service] -ExecStart= -ExecStart=-/sbin/agetty --autologin $USER --noclear %I \$TERM -EOF - sed /etc/lightdm/lightdm.conf -i -e "s/^\(#\|\)autologin-user=.*/autologin-user=$USER/" - disable_raspi_config_at_boot - else - whiptail --msgbox "Do 'sudo apt-get install lightdm' to allow configuration of boot to desktop" 20 60 2 - return 1 - fi - ;; - *) - whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 - return 1 - ;; - esac - systemctl daemon-reload - ASK_TO_REBOOT=1 - fi -} - -do_boot_order() { - if [ "$INTERACTIVE" = True ]; then - BOOTOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Device Order" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ - "B1 SD Card Boot" "Boot from SD Card if available, otherwise boot from USB" \ - "B2 USB Boot" "Boot from USB if available, otherwise boot from SD Card" \ - "B3 Network Boot" "Boot from network if SD card boot fails" \ - 3>&1 1>&2 2>&3) - else - BOOTOPT=$1 - true - fi - if [ $? -eq 0 ]; then - CURDATE=$(date -d "`vcgencmd bootloader_version | head -n 1`" +%Y%m%d) - FILNAME="none" - if grep -q "stable" /etc/default/rpi-eeprom-update ; then - EEPATH="/lib/firmware/raspberrypi/bootloader/stable/pieeprom*.bin" - else - EEPATH="/lib/firmware/raspberrypi/bootloader/critical/pieeprom*.bin" - fi - for filename in $EEPATH ; do - FILDATE=$(date -d "`echo $filename | cut -d - -f 2- | cut -d . -f 1`" +%Y%m%d) - if [ $FILDATE -eq $CURDATE ]; then - FILNAME=$filename - fi - done - if [ "$FILNAME" = "none" ]; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "No EEPROM bin file found for version `date -d $CURDATE +%Y-%m-%d` - aborting" 20 60 2 - fi - return 1 - fi - EECFG=$(mktemp) - vcgencmd bootloader_config > $EECFG - sed $EECFG -i -e "/SD_BOOT_MAX_RETRIES/d" - sed $EECFG -i -e "/NET_BOOT_MAX_RETRIES/d" - case "$BOOTOPT" in - B1*) - if ! grep -q "BOOT_ORDER" $EECFG ; then - sed $EECFG -i -e "\$a[all]\nBOOT_ORDER=0xf41" - else - sed $EECFG -i -e "s/^BOOT_ORDER=.*/BOOT_ORDER=0xf41/" - fi - STATUS="SD Card" - ;; - B2*) - if ! grep -q "BOOT_ORDER" $EECFG ; then - sed $EECFG -i -e "\$a[all]\nBOOT_ORDER=0xf14" - else - sed $EECFG -i -e "s/^BOOT_ORDER=.*/BOOT_ORDER=0xf14/" - fi - STATUS="USB" - ;; - B3*) - if ! grep -q "BOOT_ORDER" $EECFG ; then - sed $EECFG -i -e "\$a[all]\nBOOT_ORDER=0xf21" - else - sed $EECFG -i -e "s/^BOOT_ORDER=.*/BOOT_ORDER=0xf21/" - fi - STATUS="Network" - ;; - *) - whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 - return 1 - ;; - esac - EEBIN=$(mktemp) - rpi-eeprom-config --config $EECFG --out $EEBIN $FILNAME - rpi-eeprom-update -d -f $EEBIN - ASK_TO_REBOOT=1 - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "$STATUS is default boot device" 20 60 1 - fi - fi -} - - -do_boot_rom() { - if [ "$INTERACTIVE" = True ]; then - BOOTOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot ROM Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ - "E1 Latest" "Use the latest version boot ROM software" \ - "E2 Default" "Use the factory default boot ROM software" \ - 3>&1 1>&2 2>&3) - else - BOOTOPT=$1 - true - fi - if [ $? -eq 0 ]; then - case "$BOOTOPT" in - E1*) - sed /etc/default/rpi-eeprom-update -i -e "s/^FIRMWARE_RELEASE_STATUS.*/FIRMWARE_RELEASE_STATUS=\"stable\"/" - EETYPE="Latest version" - ;; - E2*) - sed /etc/default/rpi-eeprom-update -i -e "s/^FIRMWARE_RELEASE_STATUS.*/FIRMWARE_RELEASE_STATUS=\"critical\"/" - EETYPE="Factory default" - ;; - *) - whiptail --msgbox "Programmer error, unrecognised boot ROM option" 20 60 2 - return 1 - ;; - esac - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "$EETYPE boot ROM selected - will be loaded at next reboot.\n\nReset boot ROM to defaults?" 20 60 2 - DEFAULTS=$? - else - DEFAULTS=$2 - fi - if [ "$DEFAULTS" -eq 0 ]; then # yes - if grep -q "stable" /etc/default/rpi-eeprom-update ; then - EEPATH="/lib/firmware/raspberrypi/bootloader/stable/" - else - EEPATH="/lib/firmware/raspberrypi/bootloader/critical/" - fi - MATCH=".*/pieeprom-[0-9][0-9][0-9][0-9]-[0-9][0-9]-[0-9][0-9].bin" - FILNAME="$(find "${EEPATH}" -maxdepth 1 -type f -size 524288c -regex "${MATCH}" | sort -r | head -n1)" - if [ -z "$FILNAME" ]; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "No EEPROM bin file found - cannot reset to defaults" 20 60 2 - fi - else - rpi-eeprom-update -d -f $FILNAME - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Boot ROM reset to defaults" 20 60 2 - fi - fi - else - rpi-eeprom-update - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Boot ROM not reset to defaults" 20 60 2 - fi - fi - ASK_TO_REBOOT=1 - fi -} - -get_boot_wait() { - if test -e /etc/systemd/system/dhcpcd.service.d/wait.conf; then - echo 0 - else - echo 1 - fi -} - -do_boot_wait() { - DEFAULT=--defaultno - if [ $(get_boot_wait) -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like boot to wait until a network connection is established?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - mkdir -p /etc/systemd/system/dhcpcd.service.d/ - cat > /etc/systemd/system/dhcpcd.service.d/wait.conf << EOF -[Service] -ExecStart= -ExecStart=/usr/sbin/dhcpcd -w -q -EOF - STATUS=enabled - elif [ $RET -eq 1 ]; then - rm -f /etc/systemd/system/dhcpcd.service.d/wait.conf - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Waiting for network on boot is $STATUS" 20 60 1 - fi -} - -get_boot_splash() { - if is_pi ; then - if grep -q "splash" $CMDLINE ; then - echo 0 - else - echo 1 - fi - else - if grep -q "GRUB_CMDLINE_LINUX_DEFAULT.*splash" /etc/default/grub ; then - echo 0 - else - echo 1 - fi - fi -} - -do_boot_splash() { - if [ ! -e /usr/share/plymouth/themes/pix/pix.script ]; then - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The splash screen is not installed so cannot be activated" 20 60 2 - fi - return 1 - fi - DEFAULT=--defaultno - if [ $(get_boot_splash) -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like to show the splash screen at boot?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - if is_pi ; then - if ! grep -q "splash" $CMDLINE ; then - sed -i $CMDLINE -e "s/$/ quiet splash plymouth.ignore-serial-consoles/" - fi - else - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1 quiet splash plymouth.ignore-serial-consoles\"/" - sed -i /etc/default/grub -e "s/ \+/ /g" - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/" - update-grub - fi - STATUS=enabled - elif [ $RET -eq 1 ]; then - if is_pi ; then - if grep -q "splash" $CMDLINE ; then - sed -i $CMDLINE -e "s/ quiet//" - sed -i $CMDLINE -e "s/ splash//" - sed -i $CMDLINE -e "s/ plymouth.ignore-serial-consoles//" - fi - else - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)quiet\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)splash\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)plymouth.ignore-serial-consoles\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/" - sed -i /etc/default/grub -e "s/ \+/ /g" - sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/" - update-grub - fi - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Splash screen at boot is $STATUS" 20 60 1 - fi -} - -get_rgpio() { - if test -e /etc/systemd/system/pigpiod.service.d/public.conf; then - echo 0 - else - echo 1 - fi -} - -do_rgpio() { - DEFAULT=--defaultno - if [ $(get_rgpio) -eq 0 ]; then - DEFAULT= - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the GPIO server to be accessible over the network?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq 0 ]; then - mkdir -p /etc/systemd/system/pigpiod.service.d/ - cat > /etc/systemd/system/pigpiod.service.d/public.conf << EOF -[Service] -ExecStart= -ExecStart=/usr/bin/pigpiod -EOF - STATUS=enabled - elif [ $RET -eq 1 ]; then - rm -f /etc/systemd/system/pigpiod.service.d/public.conf - STATUS=disabled - else - return $RET - fi - systemctl daemon-reload - if systemctl -q is-enabled pigpiod ; then - systemctl restart pigpiod - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Remote access to the GPIO server is $STATUS" 20 60 1 - fi -} - -get_camera() { - if [ $(deb_ver) -le 10 ]; then - CAM=$(get_config_var start_x $CONFIG) - if [ $CAM -eq 1 ]; then - echo 0 - else - echo 1 - fi - else - if grep -q camera_auto_detect $CONFIG ; then - CAM=$(get_config_var camera_auto_detect $CONFIG) - if [ $CAM -eq 1 ]; then - echo 0 - else - echo 1 - fi - else - echo 0 - fi - fi -} - -do_camera() { - if [ $(deb_ver) -le 10 ] && [ ! -e /boot/start_x.elf ]; then - whiptail --msgbox "Your firmware appears to be out of date (no start_x.elf). Please update" 20 60 2 - return 1 - fi - sed $CONFIG -i -e "s/^startx/#startx/" - sed $CONFIG -i -e "s/^fixup_file/#fixup_file/" - - DEFAULT=--defaultno - CURRENT=0 - if [ $(get_camera) -eq 0 ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the camera interface to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - if [ $(deb_ver) -le 10 ] ; then - set_config_var start_x 1 $CONFIG - CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG) - if [ -z "$CUR_GPU_MEM" ] || [ "$CUR_GPU_MEM" -lt 128 ]; then - set_config_var gpu_mem 128 $CONFIG - fi - else - set_config_var camera_auto_detect 1 $CONFIG - fi - STATUS=enabled - elif [ $RET -eq 1 ]; then - if [ $(deb_ver) -le 10 ] ; then - set_config_var start_x 0 $CONFIG - sed $CONFIG -i -e "s/^start_file/#start_file/" - else - set_config_var camera_auto_detect 0 $CONFIG - fi - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The camera interface is $STATUS" 20 60 1 - fi -} - -get_onewire() { - if grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then - echo 0 - else - echo 1 - fi -} - -do_onewire() { - DEFAULT=--defaultno - CURRENT=0 - if [ $(get_onewire) -eq 0 ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the one-wire interface to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - sed $CONFIG -i -e "s/^#dtoverlay=w1-gpio/dtoverlay=w1-gpio/" - if ! grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then - printf "dtoverlay=w1-gpio\n" >> $CONFIG - fi - STATUS=enabled - elif [ $RET -eq 1 ]; then - sed $CONFIG -i -e "s/^dtoverlay=w1-gpio/#dtoverlay=w1-gpio/" - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The one-wire interface is $STATUS" 20 60 1 - fi -} - -get_legacy() { - if sed -n '/\[pi4\]/,/\[/ !p' $CONFIG | grep -q '^dtoverlay=vc4-kms-v3d' ; then - echo 1 - else - echo 0 - fi -} - -do_legacy() { - DEFAULT=--defaultno - CURRENT=0 - if [ $(get_legacy) -eq 0 ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like to enable legacy camera support?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - sed $CONFIG -i -e '/\[pi4\]/,/\[/ s/^#\?dtoverlay=vc4-f\?kms-v3d/dtoverlay=vc4-fkms-v3d/g' - sed $CONFIG -i -e '/\[pi4\]/,/\[/ !s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/g' - sed $CONFIG -i -e '/\[pi4\]/,/\[/ !s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/g' - if ! sed -n '/\[pi4\]/,/\[/ p' $CONFIG | grep -q '^dtoverlay=vc4-fkms-v3d' ; then - if grep -q '[pi4]' $CONFIG ; then - sed $CONFIG -i -e 's/\[pi4\]/\[pi4\]\ndtoverlay=vc4-fkms-v3d/' - else - printf "[pi4]\ndtoverlay=vc4-fkms-v3d\n" >> $CONFIG - fi - fi - CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG) - if [ -z "$CUR_GPU_MEM" ] || [ "$CUR_GPU_MEM" -lt 128 ]; then - set_config_var gpu_mem 128 $CONFIG - fi - sed $CONFIG -i -e 's/^camera_auto_detect.*/start_x=1/g' - sed $CONFIG -i -e 's/^dtoverlay=camera/#dtoverlay=camera/g' - STATUS="Legacy camera support is enabled.\n\nPlease note that this functionality is deprecated and will not be supported for future development." - else - sed $CONFIG -i -e 's/^#\?dtoverlay=vc4-f\?kms-v3d/dtoverlay=vc4-kms-v3d/g' - sed $CONFIG -i -e '/\[pi4\]/,/\[/ {/dtoverlay=vc4-kms-v3d/d}' - if ! sed -n '/\[pi4\]/,/\[/ !p' $CONFIG | grep -q '^dtoverlay=vc4-kms-v3d' ; then - if grep -q '[all]' $CONFIG ; then - sed $CONFIG -i -e 's/\[all\]/\[all\]\ndtoverlay=vc4-kms-v3d/' - else - printf "[all]\ndtoverlay=vc4-kms-v3d\n" >> $CONFIG - fi - fi - sed $CONFIG -i -e 's/^start_x.*/camera_auto_detect=1/g' - sed $CONFIG -i -e 's/^#dtoverlay=camera/dtoverlay=camera/g' - STATUS="Legacy camera support is disabled." - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "$STATUS" 20 60 1 - fi -} - -do_gldriver() { - if [ ! -e /boot/overlays/vc4-kms-v3d.dtbo ]; then - whiptail --msgbox "Driver and kernel not present on your system. Please update" 20 60 2 - return 1 - fi - for package in gldriver-test libgl1-mesa-dri; do - if [ "$(dpkg -l "$package" 2> /dev/null | tail -n 1 | cut -d ' ' -f 1)" != "ii" ]; then - missing_packages="$package $missing_packages" - fi - done - if [ -n "$missing_packages" ] && ! apt-get install $missing_packages; then - whiptail --msgbox "Required packages not found, please install: ${missing_packages}" 20 60 2 - return 1 - fi - GLOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "GL Driver" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \ - "G1 Legacy" "Original non-GL desktop driver" \ - "G2 GL (Full KMS)" "OpenGL desktop driver with full KMS" \ - 3>&1 1>&2 2>&3) - if [ $? -eq 0 ]; then - case "$GLOPT" in - G1*) - if sed -n "/\[pi4\]/,/\[/ !p" $CONFIG | grep -q -E "^dtoverlay=vc4-f?kms-v3d" ; then - ASK_TO_REBOOT=1 - fi - sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/g" - sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/g" - STATUS="The GL driver is disabled." - ;; - G2*) - if ! sed -n "/\[pi4\]/,/\[/ !p" $CONFIG | grep -q "^dtoverlay=vc4-kms-v3d" ; then - ASK_TO_REBOOT=1 - fi - sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/g" - sed $CONFIG -i -e "s/^#dtoverlay=vc4-kms-v3d/dtoverlay=vc4-kms-v3d/g" - if ! sed -n "/\[pi4\]/,/\[/ !p" $CONFIG | grep -q "^dtoverlay=vc4-kms-v3d" ; then - printf "[all]\ndtoverlay=vc4-kms-v3d\n" >> $CONFIG - fi - STATUS="The full KMS GL driver is enabled." - ;; - *) - whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 - return 1 - ;; - esac - else - return 0 - fi - whiptail --msgbox "$STATUS" 20 60 1 -} - -do_xcompmgr() { - DEFAULT=--defaultno - CURRENT=0 - if [ -e /etc/xdg/autostart/xcompmgr.desktop ]; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the xcompmgr composition manager to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - if [ ! -e /usr/bin/xcompmgr ] ; then - apt-get -y install xcompmgr - fi - cat << EOF > /etc/xdg/autostart/xcompmgr.desktop -[Desktop Entry] -Type=Application -Name=xcompmgr -Comment=Start xcompmgr compositor -NoDisplay=true -Exec=/usr/lib/raspi-config/cmstart.sh -EOF - STATUS=enabled - elif [ $RET -eq 1 ]; then - rm -f /etc/xdg/autostart/xcompmgr.desktop - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The xcompmgr composition manager is $STATUS" 20 60 1 - fi -} - -do_glamor() { - DEFAULT= - CURRENT=1 - if [ -e /usr/share/X11/xorg.conf.d/20-noglamor.conf ] ; then - DEFAULT=--defaultno - CURRENT=0 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like glamor acceleration to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - systemctl disable glamor-test.service - systemctl stop glamor-test.service - rm -f /usr/share/X11/xorg.conf.d/20-noglamor.conf - STATUS=enabled - elif [ $RET -eq 1 ]; then - systemctl enable glamor-test.service && - systemctl start glamor-test.service && - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Glamor acceleration is $STATUS" 20 60 1 - fi -} - -do_wayland() { - DEFAULT=--defaultno - CURRENT=0 - if grep -q "^user-session=LXDE-pi-wayland" /etc/lightdm/lightdm.conf ; then - DEFAULT= - CURRENT=1 - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the Wayland backend to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - ASK_TO_REBOOT=1 - fi - if [ $RET -eq 0 ]; then - sed /etc/lightdm/lightdm.conf -i -e "s/^#\\?user-session.*/user-session=LXDE-pi-wayland/" - sed /etc/lightdm/lightdm.conf -i -e "s/^#\\?autologin-session.*/autologin-session=LXDE-pi-wayland/" - if [ -e "/var/lib/AccountsService/users/$USER" ] ; then - sed "/var/lib/AccountsService/users/$USER" -i -e "s/XSession=.*/XSession=LXDE-pi-wayland/" - fi - STATUS=enabled - elif [ $RET -eq 1 ]; then - sed /etc/lightdm/lightdm.conf -i -e "s/^#\\?user-session.*/user-session=LXDE-pi-x/" - sed /etc/lightdm/lightdm.conf -i -e "s/^#\\?autologin-session.*/autologin-session=LXDE-pi-x/" - if [ -e "/var/lib/AccountsService/users/$USER" ] ; then - sed "/var/lib/AccountsService/users/$USER" -i -e "s/XSession=.*/XSession=LXDE-pi-x/" - fi - STATUS=disabled - else - return $RET - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Wayland is $STATUS" 20 60 1 - fi -} - get_net_names() { if grep -q "net.ifnames=0" $CMDLINE || \ ( [ "$(readlink -f /etc/systemd/network/99-default.link)" = "/dev/null" ] && \ @@ -2113,213 +363,6 @@ do_net_names () { fi } -do_update() { - apt-get update && - apt-get install raspi-config && - printf "Sleeping 5 seconds before reloading raspi-config\n" && - sleep 5 && - exec raspi-config -} - -do_audio() { - if is_pulseaudio ; then - oIFS="$IFS" - if [ "$INTERACTIVE" = True ]; then - list=$(sudo -u $SUDO_USER XDG_RUNTIME_DIR=/run/user/$SUDO_UID pacmd list-sinks | grep -e index -e alsa.name | sed s/*//g | sed s/^[' '\\t]*//g | sed s/'index: '//g | sed s/'alsa.name = '//g | sed s/'bcm2835 '//g | sed s/\"//g | tr '\n' '/') - if ! [ -z "$list" ] ; then - IFS="/" - AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 ${list} 3>&1 1>&2 2>&3) - else - whiptail --msgbox "No internal audio devices found" 20 60 1 - return 1 - fi - else - AUDIO_OUT=$1 - true - fi - if [ $? -eq 0 ]; then - sudo -u $SUDO_USER XDG_RUNTIME_DIR=/run/user/$SUDO_UID pactl set-default-sink $AUDIO_OUT - fi - IFS=$oIFS - else - if aplay -l | grep -q "bcm2835 ALSA"; then - if [ "$INTERACTIVE" = True ]; then - AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \ - "0" "Auto" \ - "1" "Force 3.5mm ('headphone') jack" \ - "2" "Force HDMI" \ - 3>&1 1>&2 2>&3) - else - AUDIO_OUT=$1 - fi - if [ $? -eq 0 ]; then - amixer cset numid=3 "$AUDIO_OUT" - fi - else - ASPATH=$(getent passwd $USER | cut -d : -f 6)/.asoundrc - if [ "$INTERACTIVE" = True ]; then - CARD0=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 0" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-) - CARD1=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 1" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-) - CARD2=$(LC_ALL=C aplay -l | grep bcm2835 | grep "card 2" | cut -d [ -f 3 | cut -d ] -f 1 | cut -d ' ' -f 2-) - if ! [ -z "$CARD2" ]; then - AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \ - "0" "$CARD0" \ - "1" "$CARD1" \ - "2" "$CARD2" \ - 3>&1 1>&2 2>&3) - elif ! [ -z "$CARD1" ]; then - AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \ - "0" "$CARD0" \ - "1" "$CARD1" \ - 3>&1 1>&2 2>&3) - elif ! [ -z "$CARD0" ]; then - AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \ - "0" "$CARD0" \ - 3>&1 1>&2 2>&3) - else - whiptail --msgbox "No internal audio devices found" 20 60 1 - false - fi - else - AUDIO_OUT=$1 - fi - if [ $? -eq 0 ]; then - cat << EOF > $ASPATH -pcm.!default { - type asym - playback.pcm { - type plug - slave.pcm "output" - } - capture.pcm { - type plug - slave.pcm "input" - } -} - -pcm.output { - type hw - card $AUDIO_OUT -} - -ctl.!default { - type hw - card $AUDIO_OUT -} -EOF - fi - fi - fi -} - -do_resolution() { - if [ "$INTERACTIVE" = True ]; then - CMODE=$(get_config_var hdmi_mode $CONFIG) - CGROUP=$(get_config_var hdmi_group $CONFIG) - if [ $CMODE -eq 0 ] ; then - CSET="Default" - elif [ $CGROUP -eq 2 ] ; then - CSET="DMT Mode "$CMODE - else - CSET="CEA Mode "$CMODE - fi - oIFS="$IFS" - IFS="/" - if tvservice -d /dev/null | grep -q Nothing ; then - value="Default/720x480/DMT Mode 4/640x480 60Hz 4:3/DMT Mode 9/800x600 60Hz 4:3/DMT Mode 16/1024x768 60Hz 4:3/DMT Mode 85/1280x720 60Hz 16:9/DMT Mode 35/1280x1024 60Hz 5:4/DMT Mode 51/1600x1200 60Hz 4:3/DMT Mode 82/1920x1080 60Hz 16:9/" - else - value="Default/Monitor preferred resolution/" - value=$value$(tvservice -m CEA | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/CEA Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/') - value=$value$(tvservice -m DMT | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/DMT Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/') - fi - RES=$(whiptail --default-item $CSET --menu "Choose screen resolution" 20 60 10 ${value} 3>&1 1>&2 2>&3) - STATUS=$? - IFS=$oIFS - if [ $STATUS -eq 0 ] ; then - GRS=$(echo "$RES" | cut -d ' ' -f 1) - MODE=$(echo "$RES" | cut -d ' ' -f 3) - if [ $GRS = "Default" ] ; then - MODE=0 - elif [ $GRS = "DMT" ] ; then - GROUP=2 - else - GROUP=1 - fi - fi - else - GROUP=$1 - MODE=$2 - STATUS=0 - fi - if [ $STATUS -eq 0 ]; then - if [ $MODE -eq 0 ]; then - clear_config_var hdmi_force_hotplug $CONFIG - clear_config_var hdmi_group $CONFIG - clear_config_var hdmi_mode $CONFIG - else - set_config_var hdmi_force_hotplug 1 $CONFIG - set_config_var hdmi_group $GROUP $CONFIG - set_config_var hdmi_mode $MODE $CONFIG - fi - if [ "$INTERACTIVE" = True ]; then - if [ $MODE -eq 0 ] ; then - whiptail --msgbox "The resolution is set to default" 20 60 1 - else - whiptail --msgbox "The resolution is set to $GRS mode $MODE" 20 60 1 - fi - fi - if [ $MODE -eq 0 ] ; then - TSET="Default" - elif [ $GROUP -eq 2 ] ; then - TSET="DMT Mode "$MODE - else - TSET="CEA Mode "$MODE - fi - if [ "$TSET" != "$CSET" ] ; then - ASK_TO_REBOOT=1 - fi - fi -} - -get_vnc_resolution() { - if [ -e /etc/xdg/autostart/vnc_xrandr.desktop ] ; then - echo $(grep fb /etc/xdg/autostart/vnc_xrandr.desktop | cut -f 15 -d ' ') - else - echo "" - fi -} - -do_vnc_resolution() { - if [ "$INTERACTIVE" = True ]; then - CUR=$(get_vnc_resolution) - if [ "$CUR" = "" ] ; then - CUR=640x480 - fi - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --default-item $CUR --menu "Set VNC Resolution" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "640x480" "" "720x480" "" "800x600" "" "1024x768" "" "1280x720" "" "1280x1024" "" "1600x1200" "" "1920x1080" "" 3>&1 1>&2 2>&3) - RET=$? - else - FUN=$1 - RET=0 - fi - if [ $RET -eq 1 ]; then - return 0 - elif [ $RET -eq 0 ]; then - cat > /etc/xdg/autostart/vnc_xrandr.desktop << EOF -[Desktop Entry] -Type=Application -Name=vnc_xrandr -Comment=Set resolution for VNC -NoDisplay=true -Exec=sh -c "if ! (xrandr | grep -q -w connected) ; then /usr/bin/xrandr --fb $FUN ; fi" -EOF - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The resolution is set to $FUN" 20 60 1 - ASK_TO_REBOOT=1 - fi - fi -} - list_wlan_interfaces() { for dir in /sys/class/net/*/wireless; do if [ -d "$dir" ]; then @@ -2436,88 +479,6 @@ do_finish() { exit 0 } -# $1 = filename, $2 = key name -get_json_string_val() { - sed -n -e "s/^[[:space:]]*\"$2\"[[:space:]]*:[[:space:]]*\"\(.*\)\"[[:space:]]*,$/\1/p" $1 -} - -# TODO: This is probably broken -do_apply_os_config() { - [ -e /boot/os_config.json ] || return 0 - NOOBSFLAVOUR=$(get_json_string_val /boot/os_config.json flavour) - NOOBSLANGUAGE=$(get_json_string_val /boot/os_config.json language) - NOOBSKEYBOARD=$(get_json_string_val /boot/os_config.json keyboard) - - if [ -n "$NOOBSFLAVOUR" ]; then - printf "Setting flavour to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSFLAVOUR" - - printf "Unrecognised flavour. Ignoring\n" - fi - - # TODO: currently ignores en_gb settings as we assume we are running in a - # first boot context, where UK English settings are default - case "$NOOBSLANGUAGE" in - "en") - if [ "$NOOBSKEYBOARD" = "gb" ]; then - DEBLANGUAGE="" # UK english is the default, so ignore - else - DEBLANGUAGE="en_US.UTF-8" - fi - ;; - "de") - DEBLANGUAGE="de_DE.UTF-8" - ;; - "fi") - DEBLANGUAGE="fi_FI.UTF-8" - ;; - "fr") - DEBLANGUAGE="fr_FR.UTF-8" - ;; - "hu") - DEBLANGUAGE="hu_HU.UTF-8" - ;; - "ja") - DEBLANGUAGE="ja_JP.UTF-8" - ;; - "nl") - DEBLANGUAGE="nl_NL.UTF-8" - ;; - "pt") - DEBLANGUAGE="pt_PT.UTF-8" - ;; - "ru") - DEBLANGUAGE="ru_RU.UTF-8" - ;; - "zh_CN") - DEBLANGUAGE="zh_CN.UTF-8" - ;; - *) - printf "Language '%s' not handled currently. Run sudo raspi-config to set up" "$NOOBSLANGUAGE" - ;; - esac - - if [ -n "$DEBLANGUAGE" ]; then - printf "Setting language to %s based on os_config.json from NOOBS. May take a while\n" "$DEBLANGUAGE" - do_change_locale "$DEBLANGUAGE" - fi - - if [ -n "$NOOBSKEYBOARD" -a "$NOOBSKEYBOARD" != "gb" ]; then - printf "Setting keyboard layout to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSKEYBOARD" - do_configure_keyboard "$NOOBSKEYBOARD" - fi - return 0 -} - -get_overlay_now() { - grep -q "boot=overlay" /proc/cmdline - echo $? -} - -get_overlay_conf() { - grep -q "boot=overlay" /boot/cmdline.txt - echo $? -} - get_bootro_now() { findmnt /boot | grep -q " ro," echo $? @@ -2532,302 +493,6 @@ is_uname_current() { test -d "/lib/modules/$(uname -r)" } -enable_overlayfs() { - KERN=$(uname -r) - INITRD=initrd.img-"$KERN"-overlay - - # mount the boot partition as writable if it isn't already - if [ $(get_bootro_now) -eq 0 ] ; then - if ! mount -o remount,rw /boot 2>/dev/null ; then - echo "Unable to mount boot partition as writable - cannot enable" - return 1 - fi - BOOTRO=yes - else - BOOTRO=no - fi - - cat > /etc/initramfs-tools/scripts/overlay << 'EOF' -# Local filesystem mounting -*- shell-script -*- - -# -# This script overrides local_mount_root() in /scripts/local -# and mounts root as a read-only filesystem with a temporary (rw) -# overlay filesystem. -# - -. /scripts/local - -local_mount_root() -{ - local_top - local_device_setup "${ROOT}" "root file system" - ROOT="${DEV}" - - # Get the root filesystem type if not set - if [ -z "${ROOTFSTYPE}" ]; then - FSTYPE=$(get_fstype "${ROOT}") - else - FSTYPE=${ROOTFSTYPE} - fi - - local_premount - - # CHANGES TO THE ORIGINAL FUNCTION BEGIN HERE - # N.B. this code still lacks error checking - - modprobe ${FSTYPE} - checkfs ${ROOT} root "${FSTYPE}" - - # Create directories for root and the overlay - mkdir /lower /upper - - # Mount read-only root to /lower - if [ "${FSTYPE}" != "unknown" ]; then - mount -r -t ${FSTYPE} ${ROOTFLAGS} ${ROOT} /lower - else - mount -r ${ROOTFLAGS} ${ROOT} /lower - fi - - modprobe overlay || insmod "/lower/lib/modules/$(uname -r)/kernel/fs/overlayfs/overlay.ko" - - # Mount a tmpfs for the overlay in /upper - mount -t tmpfs tmpfs /upper - mkdir /upper/data /upper/work - - # Mount the final overlay-root in $rootmnt - mount -t overlay \ - -olowerdir=/lower,upperdir=/upper/data,workdir=/upper/work \ - overlay ${rootmnt} -} -EOF - - # add the overlay to the list of modules - if ! grep overlay /etc/initramfs-tools/modules > /dev/null; then - echo overlay >> /etc/initramfs-tools/modules - fi - - # build the new initramfs - update-initramfs -c -k "$KERN" - - # rename it so we know it has overlay added - mv /boot/initrd.img-"$KERN" /boot/"$INITRD" - - # there is now a modified initramfs ready for use... - - # modify config.txt - sed -i /boot/config.txt -e "/initramfs.*/d" - echo initramfs "$INITRD" >> /boot/config.txt - - # modify command line - if ! grep -q "boot=overlay" /boot/cmdline.txt ; then - sed -i /boot/cmdline.txt -e "s/^/boot=overlay /" - fi - - if [ "$BOOTRO" = "yes" ] ; then - if ! mount -o remount,ro /boot 2>/dev/null ; then - echo "Unable to remount boot partition as read-only" - fi - fi -} - -disable_overlayfs() { - KERN=$(uname -r) - # mount the boot partition as writable if it isn't already - if [ $(get_bootro_now) -eq 0 ] ; then - if ! mount -o remount,rw /boot 2>/dev/null ; then - echo "Unable to mount boot partition as writable - cannot disable" - return 1 - fi - BOOTRO=yes - else - BOOTRO=no - fi - - # modify config.txt - sed -i /boot/config.txt -e "/initramfs.*/d" - update-initramfs -d -k "${KERN}-overlay" - - # modify command line - sed -i /boot/cmdline.txt -e "s/\(.*\)boot=overlay \(.*\)/\1\2/" - - if [ "$BOOTRO" = "yes" ] ; then - if ! mount -o remount,ro /boot 2>/dev/null ; then - echo "Unable to remount boot partition as read-only" - fi - fi -} - -enable_bootro() { - if [ $(get_overlay_now) -eq 0 ] ; then - echo "Overlay in use; cannot update fstab" - return 1 - fi - sed -i /etc/fstab -e "s/\(.*\/boot.*\)defaults\(.*\)/\1defaults,ro\2/" -} - -disable_bootro() { - if [ $(get_overlay_now) -eq 0 ] ; then - echo "Overlay in use; cannot update fstab" - return 1 - fi - sed -i /etc/fstab -e "s/\(.*\/boot.*\)defaults,ro\(.*\)/\1defaults\2/" -} - -do_overlayfs() { - DEFAULT=--defaultno - CURRENT=0 - STATUS="disabled" - - if [ "$INTERACTIVE" = True ] && ! is_uname_current; then - whiptail --msgbox "Could not find modules for the running kernel ($(uname -r))." 20 60 1 - return 1 - fi - - if [ $(get_overlay_conf) -eq 0 ] ; then - DEFAULT= - CURRENT=1 - STATUS="enabled" - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the overlay file system to be enabled?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - if [ $RET -eq 0 ]; then - if enable_overlayfs; then - STATUS="enabled" - ASK_TO_REBOOT=1 - else - STATUS="unchanged" - fi - elif [ $RET -eq 1 ]; then - if disable_overlayfs; then - STATUS="disabled" - ASK_TO_REBOOT=1 - else - STATUS="unchanged" - fi - else - return $RET - fi - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The overlay file system is $STATUS." 20 60 1 - fi - if [ $(get_overlay_now) -eq 0 ] ; then - if [ $(get_bootro_conf) -eq 0 ] ; then - BPRO="read-only" - else - BPRO="writable" - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The boot partition is currently $BPRO. This cannot be changed while an overlay file system is enabled." 20 60 1 - fi - else - DEFAULT=--defaultno - CURRENT=0 - STATUS="writable" - if [ $(get_bootro_conf) -eq 0 ]; then - DEFAULT= - CURRENT=1 - STATUS="read-only" - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --yesno "Would you like the boot partition to be write-protected?" $DEFAULT 20 60 2 - RET=$? - else - RET=$1 - fi - if [ $RET -eq $CURRENT ]; then - if [ $RET -eq 0 ]; then - if enable_bootro; then - STATUS="read-only" - ASK_TO_REBOOT=1 - else - STATUS="unchanged" - fi - elif [ $RET -eq 1 ]; then - if disable_bootro; then - STATUS="writable" - ASK_TO_REBOOT=1 - else - STATUS="unchanged" - fi - else - return $RET - fi - fi - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "The boot partition is $STATUS." 20 60 1 - fi - fi -} - -get_proxy() { - SCHEME="$1" - VAR_NAME="${SCHEME}_proxy" - if [ -f /etc/profile.d/proxy.sh ]; then - # shellcheck disable=SC1091 - . /etc/profile.d/proxy.sh - fi - eval "echo \$$VAR_NAME" -} - -do_proxy() { - SCHEMES="$1" - ADDRESS="$2" - if [ "$SCHEMES" = "all" ]; then - CURRENT="$(get_proxy http)" - SCHEMES="http https ftp rsync" - else - CURRENT="$(get_proxy "$SCHEMES")" - fi - if [ "$INTERACTIVE" = True ]; then - if [ "$SCHEMES" = "no" ]; then - STRING="Please enter a comma separated list of addresses that should be excluded from using proxy servers.\\nEg: localhost,127.0.0.1,localaddress,.localdomain.com" - else - STRING="Please enter proxy address.\\nEg: http://user:pass@proxy:8080" - fi - if ! ADDRESS="$(whiptail --inputbox "$STRING" 20 60 "$CURRENT" 3>&1 1>&2 2>&3)"; then - return 0 - fi - fi - for SCHEME in $SCHEMES; do - unset "${SCHEME}_proxy" - CURRENT="$(get_proxy "$SCHEME")" - if [ "$CURRENT" != "$ADDRESS" ]; then - ASK_TO_REBOOT=1 - fi - if [ -f /etc/profile.d/proxy.sh ]; then - sed -i "/^export ${SCHEME}_/Id" /etc/profile.d/proxy.sh - fi - if [ "${SCHEME#*http}" != "$SCHEME" ]; then - if [ -f /etc/apt/apt.conf.d/01proxy ]; then - sed -i "/::${SCHEME}::Proxy/d" /etc/apt/apt.conf.d/01proxy - fi - fi - if [ -z "$ADDRESS" ]; then - STATUS=cleared - continue - fi - STATUS=updated - SCHEME_UPPER="$(echo "$SCHEME" | tr '[:lower:]' '[:upper:]')" - echo "export ${SCHEME_UPPER}_PROXY=\"$ADDRESS\"" >> /etc/profile.d/proxy.sh - if [ "$SCHEME" != "rsync" ]; then - echo "export ${SCHEME}_proxy=\"$ADDRESS\"" >> /etc/profile.d/proxy.sh - fi - if [ "${SCHEME#*http}" != "$SCHEME" ]; then - echo "Acquire::$SCHEME::Proxy \"$ADDRESS\";" >> /etc/apt/apt.conf.d/01proxy - fi - done - if [ "$INTERACTIVE" = True ]; then - whiptail --msgbox "Proxy settings $STATUS" 20 60 1 - fi -} - nonint() { "$@" } @@ -2838,16 +503,6 @@ nonint() { for i in $* do case $i in - --memory-split) - OPT_MEMORY_SPLIT=GET - printf "Not currently supported\n" - exit 1 - ;; - --memory-split=*) - OPT_MEMORY_SPLIT=`echo $i | sed 's/[-a-zA-Z0-9]*=//'` - printf "Not currently supported\n" - exit 1 - ;; --expand-rootfs) INTERACTIVE=False do_expand_rootfs @@ -2870,175 +525,41 @@ do esac done -#if [ "GET" = "${OPT_MEMORY_SPLIT:-}" ]; then -# set -u # Fail on unset variables -# get_current_memory_split -# echo $CURRENT_MEMSPLIT -# exit 0 -#fi - # Everything else needs to be run as root if [ $(id -u) -ne 0 ]; then printf "Script must be run as root. Try 'sudo raspi-config'\n" exit 1 fi -if [ -n "${OPT_MEMORY_SPLIT:-}" ]; then - set -e # Fail when a command errors - set_memory_split "${OPT_MEMORY_SPLIT}" - exit 0 -fi - do_system_menu() { - if is_pi ; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "System Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "S1 Wireless LAN" "Enter SSID and passphrase" \ - "S2 Audio" "Select audio out through HDMI or 3.5mm jack" \ - "S3 Password" "Change password for the '$USER' user" \ - "S4 Hostname" "Set name for this computer on a network" \ - "S5 Boot / Auto Login" "Select boot into desktop or to command line" \ - "S6 Network at Boot" "Select wait for network connection on boot" \ - "S7 Splash Screen" "Choose graphical splash screen or text boot" \ - "S8 Power LED" "Set behaviour of power LED" \ - 3>&1 1>&2 2>&3) - elif is_live ; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "System Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "S1 Wireless LAN" "Enter SSID and passphrase" \ - "S3 Password" "Change password for the '$USER' user" \ - "S4 Hostname" "Set name for this computer on a network" \ - "S5 Boot / Auto Login" "Select boot into desktop or to command line" \ - "S6 Network at Boot" "Select wait for network connection on boot" \ - 3>&1 1>&2 2>&3) - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "System Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "S1 Wireless LAN" "Enter SSID and passphrase" \ - "S3 Password" "Change password for the '$USER' user" \ - "S4 Hostname" "Set name for this computer on a network" \ - "S5 Boot / Auto Login" "Select boot into desktop or to command line" \ - "S6 Network at Boot" "Select wait for network connection on boot" \ - "S7 Splash Screen" "Choose graphical splash screen or text boot" \ - 3>&1 1>&2 2>&3) - fi + FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "System Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ + "S1 Wireless LAN" "Enter SSID and passphrase" \ + "S3 Password" "Change password for the '$USER' user" \ + "S4 Hostname" "Set name for this computer on a network" \ + 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in S1\ *) do_wifi_ssid_passphrase ;; - S2\ *) do_audio ;; S3\ *) do_change_pass ;; S4\ *) do_hostname ;; - S5\ *) do_boot_behaviour ;; - S6\ *) do_boot_wait ;; - S7\ *) do_boot_splash ;; - S8\ *) do_leds ;; - *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; - esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 - fi -} - -do_display_menu() { - if is_pi ; then - if is_kms; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Display Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "D2 Underscan" "Remove black border around screen" \ - "D4 Screen Blanking" "Enable/disable screen blanking" \ - "D5 VNC Resolution" "Set resolution for headless use" \ - "D6 Composite" "Set options for composite output" \ - 3>&1 1>&2 2>&3) - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Display Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "D1 Resolution" "Set a specific screen resolution" \ - "D2 Underscan" "Remove black border around screen" \ - "D3 Pixel Doubling" "Enable/disable 2x2 pixel mapping" \ - "D4 Screen Blanking" "Enable/disable screen blanking" \ - "D5 VNC Resolution" "Set resolution for headless use" \ - "D6 Composite" "Set options for composite output" \ - 3>&1 1>&2 2>&3) - fi - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Display Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "D2 Underscan" "Remove black border around screen" \ - "D4 Screen Blanking" "Enable/disable screen blanking" \ - 3>&1 1>&2 2>&3) - fi - RET=$? - if [ $RET -eq 1 ]; then - return 0 - elif [ $RET -eq 0 ]; then - case "$FUN" in - D1\ *) do_resolution ;; - D2\ *) if is_pi && ! is_kms; then - do_overscan - else - do_overscan_kms - fi - ;; - D3\ *) do_pixdub ;; - D4\ *) do_blanking ;; - D5\ *) do_vnc_resolution ;; - D6\ *) if is_pifour ; then - do_pi4video - else - do_composite - fi - ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi } do_interface_menu() { - if is_pi ; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "I1 Legacy Camera" "Enable/disable legacy camera support" \ - "I2 SSH" "Enable/disable remote command line access using SSH" \ - "I3 VNC" "Enable/disable graphical remote access using RealVNC" \ - "I4 SPI" "Enable/disable automatic loading of SPI kernel module" \ - "I5 I2C" "Enable/disable automatic loading of I2C kernel module" \ - "I6 Serial Port" "Enable/disable shell messages on the serial connection" \ - "I7 1-Wire" "Enable/disable one-wire interface" \ - "I8 Remote GPIO" "Enable/disable remote access to GPIO pins" \ - 3>&1 1>&2 2>&3) - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "I2 SSH" "Enable/disable remote command line access using SSH" \ - 3>&1 1>&2 2>&3) - fi - RET=$? - if [ $RET -eq 1 ]; then - return 0 - elif [ $RET -eq 0 ]; then - case "$FUN" in - I1\ *) do_legacy ;; - I2\ *) do_ssh ;; - I3\ *) do_vnc ;; - I4\ *) do_spi ;; - I5\ *) do_i2c ;; - I6\ *) do_serial ;; - I7\ *) do_onewire ;; - I8\ *) do_rgpio ;; - *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; - esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 - fi -} - -do_performance_menu() { - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Performance Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "P1 Overclock" "Configure CPU overclocking" \ - "P2 GPU Memory" "Change the amount of memory made available to the GPU" \ - "P3 Overlay File System" "Enable/disable read-only file system" \ - "P4 Fan" "Set behaviour of GPIO fan" \ + FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ + "I2 SSH" "Enable/disable remote command line access using SSH" \ 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in - P1\ *) do_overclock ;; - P2\ *) do_memory_split ;; - P3\ *) do_overlayfs ;; - P4\ *) do_fan ;; + I2\ *) do_ssh ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi @@ -3048,7 +569,6 @@ do_internationalisation_menu() { FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ "L1 Locale" "Configure language and regional settings" \ "L2 Timezone" "Configure time zone" \ - "L3 Keyboard" "Set keyboard layout to match your keyboard" \ "L4 WLAN Country" "Set legal wireless channels for your country" \ 3>&1 1>&2 2>&3) RET=$? @@ -3058,7 +578,6 @@ do_internationalisation_menu() { case "$FUN" in L1\ *) do_change_locale ;; L2\ *) do_change_timezone ;; - L3\ *) do_configure_keyboard ;; L4\ *) do_wifi_country ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 @@ -3066,81 +585,17 @@ do_internationalisation_menu() { } do_advanced_menu() { - if is_pifour ; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "A1 Expand Filesystem" "Ensures that all of the SD card is available" \ - "A3 Compositor" "Enable/disable xcompmgr composition manager" \ - "A4 Network Interface Names" "Enable/disable predictable network i/f names" \ - "A5 Network Proxy Settings" "Configure network proxy settings" \ - "A6 Boot Order" "Choose network or USB device boot" \ - "A7 Bootloader Version" "Select latest or default boot ROM software" \ - "A9 Wayland" "Enable experimental Wayland backend" \ - 3>&1 1>&2 2>&3) - elif is_pi ; then - if is_kms; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "A1 Expand Filesystem" "Ensures that all of the SD card is available" \ - "A2 GL Driver" "Enable/disable experimental desktop GL driver" \ - "A3 Compositor" "Enable/disable xcompmgr composition manager" \ - "A4 Network Interface Names" "Enable/disable predictable network i/f names" \ - "A5 Network Proxy Settings" "Configure network proxy settings" \ - "A8 Glamor" "Enable/disable glamor graphics acceleration" \ - "A9 Wayland" "Enable experimental Wayland backend" \ - 3>&1 1>&2 2>&3) - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "A1 Expand Filesystem" "Ensures that all of the SD card is available" \ - "A2 GL Driver" "Enable/disable experimental desktop GL driver" \ - "A4 Network Interface Names" "Enable/disable predictable network i/f names" \ - "A5 Network Proxy Settings" "Configure network proxy settings" \ - "A8 Glamor" "Enable/disable glamor graphics acceleration" \ - 3>&1 1>&2 2>&3) - fi - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "A4 Network Interface Names" "Enable/disable predictable network i/f names" \ - "A5 Network Proxy Settings" "Configure network proxy settings" \ - 3>&1 1>&2 2>&3) - fi - RET=$? - if [ $RET -eq 1 ]; then - return 0 - elif [ $RET -eq 0 ]; then - case "$FUN" in - A1\ *) do_expand_rootfs ;; - A2\ *) do_gldriver ;; - A3\ *) do_xcompmgr ;; - A4\ *) do_net_names ;; - A5\ *) do_proxy_menu ;; - A6\ *) do_boot_order ;; - A7\ *) do_boot_rom ;; - A8\ *) do_glamor ;; - A9\ *) do_wayland ;; - *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; - esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 - fi -} - -do_proxy_menu() { - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Network Proxy Settings" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ - "P1 All" "Set the same proxy for all schemes" \ - "P2 HTTP" "Set the HTTP proxy" \ - "P3 HTTPS" "Set the HTTPS/SSL proxy" \ - "P4 FTP" "Set the FTP proxy" \ - "P5 RSYNC" "Set the RSYNC proxy" \ - "P6 Exceptions" "Set addresses for which a proxy server should not be used" \ + FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \ + "A1 Expand Filesystem" "Ensures that all of the SD card is available" \ + "A4 Network Interface Names" "Enable/disable predictable network i/f names" \ 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then return 0 elif [ $RET -eq 0 ]; then case "$FUN" in - P1\ *) do_proxy all ;; - P2\ *) do_proxy http ;; - P3\ *) do_proxy https ;; - P4\ *) do_proxy ftp ;; - P5\ *) do_proxy rsync ;; - P6\ *) do_proxy no;; + A1\ *) do_expand_rootfs ;; + A4\ *) do_net_names ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1 fi @@ -3158,40 +613,20 @@ if [ "$INTERACTIVE" = True ]; then fi done while true; do - if is_pi ; then - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --backtitle "$(cat /proc/device-tree/model)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \ - "1 System Options" "Configure system settings" \ - "2 Display Options" "Configure display settings" \ - "3 Interface Options" "Configure connections to peripherals" \ - "4 Performance Options" "Configure performance settings" \ - "5 Localisation Options" "Configure language and regional settings" \ - "6 Advanced Options" "Configure advanced settings" \ - "8 Update" "Update this tool to the latest version" \ - "9 About raspi-config" "Information about this configuration tool" \ - 3>&1 1>&2 2>&3) - else - FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \ - "1 System Options" "Configure system settings" \ - "2 Display Options" "Configure display settings" \ - "3 Interface Options" "Configure connections to peripherals" \ - "5 Localisation Options" "Configure language and regional settings" \ - "6 Advanced Options" "Configure advanced settings" \ - "8 Update" "Update this tool to the latest version" \ - "9 About raspi-config" "Information about this configuration tool" \ - 3>&1 1>&2 2>&3) - fi + FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \ + "1 System Options" "Configure system settings" \ + "5 Localisation Options" "Configure language and regional settings" \ + "6 Advanced Options" "Configure advanced settings" \ + "9 About raspi-config" "Information about this configuration tool" \ + 3>&1 1>&2 2>&3) RET=$? if [ $RET -eq 1 ]; then do_finish elif [ $RET -eq 0 ]; then case "$FUN" in 1\ *) do_system_menu ;; - 2\ *) do_display_menu ;; - 3\ *) do_interface_menu ;; - 4\ *) do_performance_menu ;; 5\ *) do_internationalisation_menu ;; 6\ *) do_advanced_menu ;; - 8\ *) do_update ;; 9\ *) do_about ;; *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;; esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1