brain-config/raspi-config

#!/bin/sh
# Part of raspi-config http://github.com/asb/raspi-config
#
# See LICENSE file for copyright and license details


if [ $(id -u) -ne 0 ]; then
  printf "Script must be run as root\n"
  exit 1
fi

do_info() {
  whiptail --msgbox "This tool provides a straight-forward way of doing 
  initial configuration of the Raspberry Pi. Although it can be run at any 
  time, some of the options may have difficulties if you have heavily 
  customised your installation." 20 60 1
}

do_expand_rootfs() {
  # Get the starting offset of the root partition
  PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^2" | cut -f 2 -d:)
  [ "$PART_START" ] || return 1
  # Return value will likely be error for fdisk as it fails to reload the 
  # partition table because the root fs is mounted
  fdisk /dev/mmcblk0 <<EOF
p
d
2
n
p
2
$PART_START

p
w
EOF

  # now set up an init.d script
cat <<\EOF > /etc/init.d/resize2fs_once &&
  #!/bin/sh
### BEGIN INIT INFO
# Provides:          resize2fs_once
# Required-Start:
# Required-Stop:
# Default-Start: 2 3 4 5 S
# Default-Stop:
# Short-Description: Resize the root filesystem to fill partition
# Description:
### END INIT INFO

. /lib/lsb/init-functions

case "$1" in
  start)
    log_daemon_msg "Starting resize2fs_once" &&
    resize2fs /dev/mmcblk0p2 &&
    rm /etc/init.d/resize2fs_once &&
    update-rc.d resize2fs_once remove &&
    log_end_msg $?
    ;;
  *)
    echo "Usage: $0 start" >&2
    exit 3
    ;;
esac
EOF
  chmod +x /etc/init.d/resize2fs_once &&
  update-rc.d resize2fs_once defaults &&
  whiptail --msgbox "Root partition has been resized.\n\
The filesystem will be enlarged upon the next reboot" 20 60 2
}

# $1 is 0 to disable overscan, 1 to disable it
set_overscan() {
  # Stop if /boot is not a mountpoint
  if ! mountpoint -q /boot; then
    return 1
  fi

  [ -e /boot/config.txt ] || touch /boot/config.txt

  if [ "$1" -eq 0 ]; then # disable overscan
    sed /boot/config.txt -i -e "s/^overscan_/#overscan_/"
    if grep -q "^disable_overscan" /boot/config.txt; then
      sed -i /boot/config.txt -e "s/^disable_overscan.*$/disable_overscan=1/"
    else
      printf "disable_overscan=1\n" >> /boot/config.txt
    fi
  else # enable overscan
    sed -i /boot/config.txt -e "s/^disable_overscan.*$/disable_overscan=0/"
  fi
}

do_overscan() {
  whiptail --yesno "What would you like to do with overscan" 20 60 2 \
    --yes-button Disable --no-button Enable 
  RET=$?
  if [ $RET -eq 0 ] || [ $RET -eq 1 ]; then
    set_overscan $RET;
  else
    return 1
  fi
}

do_change_pass() {
  whiptail --msgbox "You will now be asked to enter a new password for the pi user" 20 60 1
  passwd pi &&
  whiptail --msgbox "Password changed successfully" 20 60 1
}

do_configure_keyboard() {
  dpkg-reconfigure keyboard-setup &&
  printf "Reloading keymap. This may take a short while\n" &&
  invoke-rc.d keyboard-setup start
}

do_change_locale() {
  dpkg-reconfigure locales
}

do_change_timezone() {
  dpkg-reconfigure tzdata
}

do_memory_split() {
  # Stop if /boot is not a mountpoint
  if ! mountpoint -q /boot; then
    return 1
  fi
  MEMSPLIT=$(whiptail --menu "Set memory split" 20 60 10 \
    "224" "224MiB for ARM, 32MiB for VideoCore" \
    "192" "192MiB for ARM, 64MiB for VideoCore" \
    "128" "128MiB for ARM, 128MiB for VideoCore" \
    3>&1 1>&2 2>&3)
  if [ $? -eq 0 ]; then
    cp -a /boot/arm${MEMSPLIT}_start.elf /boot/start.elf
  fi
}

do_ssh() {
  whiptail --yesno "Would you like the SSH server enabled or disabled?" 20 60 2 \
    --yes-button Enable --no-button Disable 
  RET=$?
  if [ $RET -eq 0 ]; then
    update-rc.d ssh enable &&
    invoke-rc.d ssh start &&
    whiptail --msgbox "SSH server enabled" 20 60 1
  elif [ $RET -eq 1 ]; then
    update-rc.d ssh disable &&
    whiptail --msgbox "SSH server disabled" 20 60 1
  else
    return $RET
  fi
}

do_finish() {
  if [ -e /etc/profile.d/raspi-config.sh ]; then
    rm -f /etc/profile.d/raspi-config.sh
    sed -i /etc/inittab \
      -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \
      -e "/#\s*RPICFG_TO_DISABLE/d"
    telinit q
  fi
  whiptail --msgbox "Done" 20 60 1
  exit 0
}

while true; do
  FUN=$(whiptail --menu "Raspi-config" 20 80 10 --cancel-button Exit \
    "info" "Information about this tool" \
    "expand_rootfs" "Expand root partition to fill SD card" \
    "overscan" "Change overscan" \
    "change_pass" "Change password for 'pi' user" \
    "configure_keyboard" "Set keyboard layout" \
    "change_locale" "Set locale" \
    "change_timezone" "Set timezone" \
    "memory_split" "Change memory split" \
    "ssh" "Enable or disable ssh server" \
    "finish" "Finish config and don't start raspi-config at boot" \
    3>&1 1>&2 2>&3)
  if [ $? -ne 0 ]; then
    exit 0;
  else
    "do_$FUN" || whiptail --msgbox "There was an error running do_$FUN" 20 60 1
  fi
done