Initial commit

LICENSE

@@ -0,0 +1,26 @@
+raspi-config is licensed under the terms of the MIT license reproduced below.
+
+#####################################################
+
+Copyright (c) 2012 Alex Bradbury <asb@asbradbury.org>
+
+Permission is hereby granted, free of charge, to any person
+obtaining a copy of this software and associated documentation
+files (the "Software"), to deal in the Software without
+restriction, including without limitation the rights to use,
+copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following
+conditions:
+
+The above copyright notice and this permission notice shall be
+included in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.

debian/changelog

@@ -0,0 +1,5 @@
+raspi-config (20120610) unstable; urgency=low
+
+  * Initial release
+
+ -- Alex Bradbury <asb@asbradbury.org>  Sun, 10 Jun 2012 15:59:17 +0000

debian/compat

@@ -0,0 +1 @@
+8

debian/control

@@ -0,0 +1,14 @@
+Source: raspi-config
+Section: unknown
+Priority: extra
+Maintainer: Alex Bradbury <asb@asbradbury.org>
+Build-Depends: debhelper (>= 8.0.0)
+Standards-Version: 3.9.2
+Homepage: https://github.com/asb/raspi-config
+#Vcs-Git: git://git.debian.org/collab-maint/raspi-config.git
+#Vcs-Browser: http://git.debian.org/?p=collab-maint/raspi-config.git;a=summary
+
+Package: raspi-config
+Architecture: all
+Depends: ${misc:Depends}, whiptail, parted
+Description: Simple configuration for Raspberry Pi

debian/raspi-config.docs

@@ -0,0 +1,2 @@
+LICENSE
+sample_profile_d.sh

debian/raspi-config.install

@@ -0,0 +1 @@
+./raspi-config /usr/bin/

debian/rules

@@ -0,0 +1,13 @@
+#!/usr/bin/make -f
+# -*- makefile -*-
+# Sample debian/rules that uses debhelper.
+# This file was originally written by Joey Hess and Craig Small.
+# As a special exception, when this file is copied by dh-make into a
+# dh-make output file, you may use that output file without restriction.
+# This special exception was added by Craig Small in version 0.37 of dh-make.
+
+# Uncomment this to turn on verbose mode.
+#export DH_VERBOSE=1
+
+%:
+	dh $@ 

raspi-config

@@ -0,0 +1,187 @@
+#!/bin/sh
+# Part of raspi-config http://github.com/asb/raspi-config
+#
+# See LICENSE file for copyright and license details
+
+
+if [ $(id -u) -ne 0 ]; then
+  printf "Script must be run as root\n"
+  exit 1
+fi
+
+do_info() {
+  whiptail --msgbox "This tool provides a straight-forward way of doing 
+  initial configuration of the Raspberry Pi. Although it can be run at any 
+  time, some of the options may have difficulties if you have heavily 
+  customised your installation." 20 60 1
+}
+
+do_expand_rootfs() {
+  # Get the starting offset of the root partition
+  PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^2" | cut -f 2 -d:)
+  [ "$PART_START" ] || return 1
+  # Return value will likely be error for fdisk as it fails to reload the 
+  # partition table because the root fs is mounted
+  fdisk /dev/mmcblk0 <<EOF
+p
+d
+2
+n
+p
+2
+$PART_START
+
+p
+w
+EOF
+
+  # now set up an init.d script
+cat <<\EOF > /etc/init.d/resize2fs_once &&
+  #!/bin/sh
+### BEGIN INIT INFO
+# Provides:          resize2fs_once
+# Required-Start:
+# Required-Stop:
+# Default-Start: 2 3 4 5 S
+# Default-Stop:
+# Short-Description: Resize the root filesystem to fill partition
+# Description:
+### END INIT INFO
+
+. /lib/lsb/init-functions
+
+case "$1" in
+  start)
+    log_daemon_msg "Starting resize2fs_once" &&
+    resize2fs /dev/mmcblk0p2 &&
+    rm /etc/init.d/resize2fs_once &&
+    update-rc.d resize2fs_once remove &&
+    log_end_msg $?
+    ;;
+  *)
+    echo "Usage: $0 start" >&2
+    exit 3
+    ;;
+esac
+EOF
+  chmod +x /etc/init.d/resize2fs_once &&
+  update-rc.d resize2fs_once defaults &&
+  whiptail --msgbox "Root partition has been resized.\n\
+The filesystem will be enlarged upon the next reboot" 20 60 2
+}
+
+# $1 is 0 to disable overscan, 1 to disable it
+set_overscan() {
+  # Stop if /boot is not a mountpoint
+  if ! mountpoint -q /boot; then
+    return 1
+  fi
+
+  [ -e /boot/config.txt ] || touch /boot/config.txt
+
+  if [ "$1" -eq 0 ]; then # disable overscan
+    sed /boot/config.txt -i -e "s/^overscan_/#overscan_/"
+    if grep -q "^disable_overscan" /boot/config.txt; then
+      sed -i /boot/config.txt -e "s/^disable_overscan.*$/disable_overscan=1/"
+    else
+      printf "disable_overscan=1\n" >> /boot/config.txt
+    fi
+  else # enable overscan
+    sed -i /boot/config.txt -e "s/^disable_overscan.*$/disable_overscan=0/"
+  fi
+}
+
+do_overscan() {
+  whiptail --yesno "What would you like to do with overscan" 20 60 2 \
+    --yes-button Disable --no-button Enable 
+  RET=$?
+  if [ $RET -eq 0 ] || [ $RET -eq 1 ]; then
+    set_overscan $RET;
+  else
+    return 1
+  fi
+}
+
+do_change_pass() {
+  whiptail --msgbox "You will now be asked to enter a new password for the pi user" 20 60 1
+  passwd pi &&
+  whiptail --msgbox "Password changed successfully" 20 60 1
+}
+
+do_configure_keyboard() {
+  dpkg-reconfigure keyboard-setup &&
+  printf "Reloading keymap. This may take a short while\n" &&
+  invoke-rc.d keyboard-setup start
+}
+
+do_change_locale() {
+  dpkg-reconfigure locales
+}
+
+do_change_timezone() {
+  dpkg-reconfigure tzdata
+}
+
+do_memory_split() {
+  # Stop if /boot is not a mountpoint
+  if ! mountpoint -q /boot; then
+    return 1
+  fi
+  MEMSPLIT=$(whiptail --menu "Set memory split" 20 60 10 \
+    "224" "224MiB for ARM, 32MiB for VideoCore" \
+    "192" "192MiB for ARM, 64MiB for VideoCore" \
+    "128" "128MiB for ARM, 128MiB for VideoCore" \
+    3>&1 1>&2 2>&3)
+  if [ $? -eq 0 ]; then
+    cp -a /boot/arm${MEMSPLIT}_start.elf /boot/start.elf
+  fi
+}
+
+do_ssh() {
+  whiptail --yesno "Would you like the SSH server enabled or disabled?" 20 60 2 \
+    --yes-button Enable --no-button Disable 
+  RET=$?
+  if [ $RET -eq 0 ]; then
+    update-rc.d ssh enable &&
+    invoke-rc.d ssh start &&
+    whiptail --msgbox "SSH server enabled" 20 60 1
+  elif [ $RET -eq 1 ]; then
+    update-rc.d ssh disable &&
+    whiptail --msgbox "SSH server disabled" 20 60 1
+  else
+    return $RET
+  fi
+}
+
+do_finish() {
+  if [ -e /etc/profile.d/raspi-config.sh ]; then
+    rm -f /etc/profile.d/raspi-config.sh
+    sed -i /etc/inittab \
+      -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \
+      -e "/#\s*RPICFG_TO_DISABLE/d"
+    telinit q
+  fi
+  whiptail --msgbox "Done" 20 60 1
+  exit 0
+}
+
+while true; do
+  FUN=$(whiptail --menu "Raspi-config" 20 80 10 --cancel-button Exit \
+    "info" "Information about this tool" \
+    "expand_rootfs" "Expand root partition to fill SD card" \
+    "overscan" "Change overscan" \
+    "change_pass" "Change password for 'pi' user" \
+    "configure_keyboard" "Set keyboard layout" \
+    "change_locale" "Set locale" \
+    "change_timezone" "Set timezone" \
+    "memory_split" "Change memory split" \
+    "ssh" "Enable or disable ssh server" \
+    "finish" "Finish config and don't start raspi-config at boot" \
+    3>&1 1>&2 2>&3)
+  if [ $? -ne 0 ]; then
+    exit 0;
+  else
+    "do_$FUN" || whiptail --msgbox "There was an error running do_$FUN" 20 60 1
+  fi
+done
+

sample_profile_d.sh

@@ -0,0 +1,17 @@
+#!/bin/sh
+# Part of raspi-config http://github.com/asb/raspi-config
+#
+# See LICENSE file for copyright and license details
+
+# Should be installed to /etc/profile.d/raspi-config.sh to force raspi-config 
+# to run at initial login
+
+# You may also want to set automatic login in /etc/inittab on tty1 by adding a 
+# line such as:
+# 1:2345:respawn:/bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1 # RPICFG_TO_DISABLE
+
+if [ $(id -u) -ne 0 ]; then
+  printf "\nNOTICE: this Raspberry Pi has not been fully configured. Please run 'sudo raspi-config'\n\n"
+else
+  which raspi-config && exec raspi-config
+fi