diff --git a/debian/changelog b/debian/changelog index ef811a6..ebdda47 100644 --- a/debian/changelog +++ b/debian/changelog @@ -1,3 +1,11 @@ +raspi-config (20150529) jessie; urgency=low + + * systemd compatibility + * Add udevadm command to notify Xorg after change of keyboard layout - jojopi + * Remove boot to scratch + + -- Serge Schneider Fri, 29 May 2015 11:31:46 +0100 + raspi-config (20150131-4) stable; urgency=low * Use dh_installinit --no-start instead of --noscripts to ensure raspi-config runs diff --git a/raspi-config b/raspi-config index 2c74e99..256ed40 100755 --- a/raspi-config +++ b/raspi-config @@ -8,6 +8,17 @@ ASK_TO_REBOOT=0 BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf CONFIG=/boot/config.txt +get_init_sys() { + if command -v systemctl > /dev/null && systemctl | grep -q '\-\.mount'; then + SYSTEMD=1 + elif [ -f /etc/init.d/cron ] && [ ! -h /etc/init.d/cron ]; then + SYSTEMD=0 + else + echo "Unrecognised init system" + return 1 + fi +} + calc_wt_size() { # NOTE: it's tempting to redirect stderr to /dev/null, so supress error # output from tput. However in this case, tput detects neither stdout or @@ -34,15 +45,19 @@ you have heavily customised your installation.\ } do_expand_rootfs() { - if ! [ -h /dev/root ]; then - whiptail --msgbox "/dev/root does not exist or is not a symlink. Don't know how to expand" 20 60 2 - return 0 + if [ $SYSTEMD -eq 1 ]; then + ROOT_PART=$(mount | sed -n 's|^/dev/\(.*\) on / .*|\1|p') + else + if ! [ -h /dev/root ]; then + whiptail --msgbox "/dev/root does not exist or is not a symlink. Don't know how to expand" 20 60 2 + return 0 + fi + ROOT_PART=$(readlink /dev/root) fi - ROOT_PART=$(readlink /dev/root) PART_NUM=${ROOT_PART#mmcblk0p} if [ "$PART_NUM" = "$ROOT_PART" ]; then - whiptail --msgbox "/dev/root is not an SD card. Don't know how to expand" 20 60 2 + whiptail --msgbox "$ROOT_PART is not an SD card. Don't know how to expand" 20 60 2 return 0 fi @@ -54,14 +69,13 @@ do_expand_rootfs() { fi LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:) - - if [ "$LAST_PART_NUM" != "$PART_NUM" ]; then - whiptail --msgbox "/dev/root is not the last partition. Don't know how to expand" 20 60 2 + if [ $LAST_PART_NUM -ne $PART_NUM ]; then + whiptail --msgbox "$ROOT_PART is not the last partition. Don't know how to expand" 20 60 2 return 0 fi # Get the starting offset of the root partition - PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^${PART_NUM}" | cut -f 2 -d:) + PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^${PART_NUM}" | cut -f 2 -d: | sed 's/[^0-9]//g') [ "$PART_START" ] || return 1 # Return value will likely be error for fdisk as it fails to reload the # partition table because the root fs is mounted @@ -80,13 +94,13 @@ EOF ASK_TO_REBOOT=1 # now set up an init.d script -cat <<\EOF > /etc/init.d/resize2fs_once && +cat < /etc/init.d/resize2fs_once && #!/bin/sh ### BEGIN INIT INFO # Provides: resize2fs_once # Required-Start: # Required-Stop: -# Default-Start: 2 3 4 5 S +# Default-Start: 3 # Default-Stop: # Short-Description: Resize the root filesystem to fill partition # Description: @@ -94,16 +108,16 @@ cat <<\EOF > /etc/init.d/resize2fs_once && . /lib/lsb/init-functions -case "$1" in +case "\$1" in start) log_daemon_msg "Starting resize2fs_once" && - resize2fs /dev/root && - rm /etc/init.d/resize2fs_once && + resize2fs /dev/$ROOT_PART && update-rc.d resize2fs_once remove && - log_end_msg $? + rm /etc/init.d/resize2fs_once && + log_end_msg \$? ;; *) - echo "Usage: $0 start" >&2 + echo "Usage: \$0 start" >&2 exit 3 ;; esac @@ -523,88 +537,48 @@ do_i2c() { } do_serial() { - CURRENT_STATUS="yes" # assume ttyAMA0 output enabled - if ! grep -q "^T.*:.*:respawn:.*ttyAMA0" /etc/inittab; then - CURRENT_STATUS="no" + DEFAULT= + if ! grep -q "console=ttyAMA0" /boot/cmdline.txt; then + DEFAULT=--defaultno fi - whiptail --yesno "Would you like a login shell to be accessible over serial?" 20 60 2 + whiptail --yesno "Would you like a login shell to be accessible over serial?" $DEFAULT 20 60 2 RET=$? if [ $RET -eq 1 ]; then - sed -i /etc/inittab -e "s|^.*:.*:respawn:.*ttyAMA0|#&|" + if [ $SYSTEMD -eq 0 ]; then + sed -i /etc/inittab -e "s|^.*:.*:respawn:.*ttyAMA0|#&|" + fi sed -i /boot/cmdline.txt -e "s/console=ttyAMA0,[0-9]\+ //" whiptail --msgbox "Serial is now disabled" 20 60 1 elif [ $RET -eq 0 ]; then - sed -i /etc/inittab -e "s|^#\(.*:.*:respawn:.*ttyAMA0\)|\1|" - if ! grep -q "^T.*:.*:respawn:.*ttyAMA0" /etc/inittab; then - printf "T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100\n" >> /etc/inittab + if [ $SYSTEMD -eq 0 ]; then + sed -i /etc/inittab -e "s|^#\(.*:.*:respawn:.*ttyAMA0\)|\1|" + if ! grep -q "^T.*:.*:respawn:.*ttyAMA0" /etc/inittab; then + printf "T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100\n" >> /etc/inittab + fi fi if ! grep -q "console=ttyAMA0" /boot/cmdline.txt; then - sed -i /boot/cmdline.txt -e "s/root=/console=ttyAMA0,115200 root=/" + sed -i /boot/cmdline.txt -e "s/root=/console=ttyAMA0,115200 root=/" fi whiptail --msgbox "Serial is now enabled" 20 60 1 else return $RET fi + ASK_TO_REBOOT=1 } disable_raspi_config_at_boot() { if [ -e /etc/profile.d/raspi-config.sh ]; then rm -f /etc/profile.d/raspi-config.sh - sed -i /etc/inittab \ - -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \ - -e "/#\s*RPICFG_TO_DISABLE/d" - telinit q - fi -} - -enable_boot_to_scratch() { - if [ -e /etc/profile.d/boottoscratch.sh ]; then - printf "/etc/profile.d/boottoscratch.sh exists, so assuming boot to scratch enabled\n" - return 0; - fi - sed -i /etc/inittab -e "s|^\(1:2345.*getty.*tty1.*\)|\ -#\1 # BTS_TO_ENABLE\n1:2345:respawn:/bin/login -f pi tty1 /dev/tty1 2>\&1 # BTS_TO_DISABLE|" - cat <<\EOF > /etc/profile.d/boottoscratch.sh -#!/bin/sh -# Part of raspi-config http://github.com/asb/raspi-config -# -# See LICENSE file for copyright and license details - -# Should be installed to /etc/profile.d/boottoscratch.sh to force scratch to run upon boot - -# You may also want to set automatic login in /etc/inittab on tty1 by adding a -# line such as the following (raspi-config does this for you): -# 1:2345:respawn:/bin/login -f pi tty1 /dev/tty1 2>&1 # BTS_TO_DISABLE - -if [ $(tty) = "/dev/tty1" ]; then - printf "openbox --config-file /home/pi/boottoscratch/openbox_rc.xml & scratch" | xinit /dev/stdin - printf "\n\n\nShutting down in 5 seconds, hit ctrl-C to cancel\n" && sleep 5 && sudo shutdown -h now -fi -EOF - - mkdir -p /home/pi/boottoscratch - cat <<\EOF > /home/pi/boottoscratch/openbox_rc.xml - - - - - yes - yes - - - -EOF - telinit q -} - -disable_boot_to_scratch() { - if [ -e /etc/profile.d/boottoscratch.sh ]; then - rm -f /etc/profile.d/boottoscratch.sh - sed -i /etc/inittab \ - -e "s/^#\(.*\)#\s*BTS_TO_ENABLE\s*/\1/" \ - -e "/#\s*BTS_TO_DISABLE/d" + if [ $SYSTEMD -eq 1 ]; then + if [ -e /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf ]; then + rm /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf + fi + else + sed -i /etc/inittab \ + -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \ + -e "/#\s*RPICFG_TO_DISABLE/d" + fi telinit q fi } @@ -613,20 +587,27 @@ do_boot_behaviour() { BOOTOPT=$(whiptail --menu "Chose boot option" 20 60 10 \ "Console" "Text console, requiring login (default)" \ "Desktop" "Log in as user 'pi' at the graphical desktop" \ - "Scratch" "Start the Scratch programming environment upon boot" \ 3>&1 1>&2 2>&3) if [ $? -eq 0 ]; then case "$BOOTOPT" in Console) - [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2 - disable_boot_to_scratch + if [ -e /etc/init.d/lightdm ]; then + if [ $SYSTEMD -eq 1 ]; then + systemctl disable lightdm + else + update-rc.d lightdm disable 2 + fi + fi ;; Desktop) if [ -e /etc/init.d/lightdm ]; then if id -u pi > /dev/null 2>&1; then - update-rc.d lightdm enable 2 + if [ $SYSTEMD -eq 1 ]; then + systemctl enable lightdm + else + update-rc.d lightdm enable 2 + fi sed /etc/lightdm/lightdm.conf -i -e "s/^#autologin-user=.*/autologin-user=pi/" - disable_boot_to_scratch disable_raspi_config_at_boot else whiptail --msgbox "The pi user has been removed, can't set up boot to desktop" 20 60 2 @@ -636,19 +617,6 @@ do_boot_behaviour() { return 1 fi ;; - Scratch) - if [ -e /usr/bin/scratch ]; then - if id -u pi > /dev/null 2>&1; then - [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2 - disable_raspi_config_at_boot - enable_boot_to_scratch - else - whiptail --msgbox "The pi user has been removed, can't set up boot to scratch" 20 60 2 - fi - else - whiptail --msgbox "Do sudo apt-get install scratch to allow configuration of boot to scratch" 20 60 2 - fi - ;; *) whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2 return 1 @@ -759,6 +727,7 @@ get_json_string_val() { sed -n -e "s/^[[:space:]]*\"$2\"[[:space:]]*:[[:space:]]*\"\(.*\)\"[[:space:]]*,$/\1/p" $1 } +# TODO: This is probably broken do_apply_os_config() { [ -e /boot/os_config.json ] || return 0 NOOBSFLAVOUR=$(get_json_string_val /boot/os_config.json flavour) @@ -768,12 +737,7 @@ do_apply_os_config() { if [ -n "$NOOBSFLAVOUR" ]; then printf "Setting flavour to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSFLAVOUR" - if printf "%s" "$NOOBSFLAVOUR" | grep -q "Scratch"; then - disable_raspi_config_at_boot - enable_boot_to_scratch - else - printf "Unrecognised flavour. Ignoring\n" - fi + printf "Unrecognised flavour. Ignoring\n" fi # TODO: currently ignores en_gb settings as we assume we are running in a @@ -948,6 +912,7 @@ do_advanced_menu() { # # Interactive use loop # +get_init_sys calc_wt_size while true; do FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \