delete debian/ files that should never have been added

debian/files

@@ -1 +0,0 @@
-raspi-config_20130520_all.deb unknown extra

debian/raspi-config.debhelper.log

@@ -1,45 +0,0 @@
-dh_auto_configure
-dh_auto_build
-dh_auto_test
-dh_prep
-dh_installdirs
-dh_auto_install
-dh_install
-dh_installdocs
-dh_installchangelogs
-dh_installexamples
-dh_installman
-dh_installcatalogs
-dh_installcron
-dh_installdebconf
-dh_installemacsen
-dh_installifupdown
-dh_installinfo
-dh_pysupport
-dh_installinit
-dh_installmenu
-dh_installmime
-dh_installmodules
-dh_installlogcheck
-dh_installlogrotate
-dh_installpam
-dh_installppp
-dh_installudev
-dh_installwm
-dh_installxfonts
-dh_bugfiles
-dh_lintian
-dh_gconf
-dh_icons
-dh_perl
-dh_usrlocal
-dh_link
-dh_compress
-dh_fixperms
-dh_strip
-dh_makeshlibs
-dh_shlibdeps
-dh_installdeb
-dh_gencontrol
-dh_md5sums
-dh_builddeb

debian/raspi-config.substvars

@@ -1 +0,0 @@
-misc:Depends=

debian/raspi-config/DEBIAN/control

@@ -1,10 +0,0 @@
-Package: raspi-config
-Version: 20130520
-Architecture: all
-Maintainer: Alex Bradbury <asb@asbradbury.org>
-Installed-Size: 56
-Depends: whiptail, parted, lua5.1, triggerhappy
-Section: unknown
-Priority: extra
-Homepage: https://github.com/asb/raspi-config
-Description: Simple configuration for Raspberry Pi

debian/raspi-config/DEBIAN/md5sums

@@ -1,4 +0,0 @@
-2fd8412db2073efef03c425b3b9c57e2  usr/bin/raspi-config
-87c25b1874010cc3f7a251d7956b4e57  usr/share/doc/raspi-config/LICENSE
-e5562803adb62bec2cb741c62987e7a1  usr/share/doc/raspi-config/changelog.gz
-2cc747f451e60b002ce7f4051749e654  usr/share/doc/raspi-config/sample_profile_d.sh

debian/raspi-config/usr/bin/raspi-config

@@ -1,540 +0,0 @@
-#!/bin/sh
-# Part of raspi-config http://github.com/asb/raspi-config
-#
-# See LICENSE file for copyright and license details
-
-INTERACTIVE=True
-ASK_TO_REBOOT=0
-
-do_info() {
-  whiptail --msgbox "\
-This tool provides a straight-forward way of doing initial
-configuration of the Raspberry Pi. Although it can be run
-at any time, some of the options may have difficulties if
-you have heavily customised your installation.\
-" 20 70 1
-}
-
-do_expand_rootfs() {
-  if ! [ -h /dev/root ]; then
-    whiptail --msgbox "/dev/root does not exist or is not a symlink. Don't know how to expand" 20 60 2
-    return 0
-  fi
-
-  ROOT_PART=$(readlink /dev/root)
-  PART_NUM=${ROOT_PART#mmcblk0p}
-  if [ "$PART_NUM" = "$ROOT_PART" ]; then
-    whiptail --msgbox "/dev/root is not an SD card. Don't know how to expand" 20 60 2
-    return 0
-  fi
-
-  LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:)
-
-  if [ "$LAST_PART_NUM" != "$PART_NUM" ]; then
-    whiptail --msgbox "/dev/root is not the last partition. Don't know how to expand" 20 60 2
-    return 0
-  fi
-
-  # Get the starting offset of the root partition
-  PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^${PART_NUM}" | cut -f 2 -d:)
-  [ "$PART_START" ] || return 1
-  # Return value will likely be error for fdisk as it fails to reload the
-  # partition table because the root fs is mounted
-  fdisk /dev/mmcblk0 <<EOF
-p
-d
-$PART_NUM
-n
-p
-$PART_NUM
-$PART_START
-
-p
-w
-EOF
-  ASK_TO_REBOOT=1
-
-  # now set up an init.d script
-cat <<\EOF > /etc/init.d/resize2fs_once &&
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          resize2fs_once
-# Required-Start:
-# Required-Stop:
-# Default-Start: 2 3 4 5 S
-# Default-Stop:
-# Short-Description: Resize the root filesystem to fill partition
-# Description:
-### END INIT INFO
-
-. /lib/lsb/init-functions
-
-case "$1" in
-  start)
-    log_daemon_msg "Starting resize2fs_once" &&
-    resize2fs /dev/root &&
-    rm /etc/init.d/resize2fs_once &&
-    update-rc.d resize2fs_once remove &&
-    log_end_msg $?
-    ;;
-  *)
-    echo "Usage: $0 start" >&2
-    exit 3
-    ;;
-esac
-EOF
-  chmod +x /etc/init.d/resize2fs_once &&
-  update-rc.d resize2fs_once defaults &&
-  if [ "$INTERACTIVE" = True ]; then
-    whiptail --msgbox "Root partition has been resized.\nThe filesystem will be enlarged upon the next reboot" 20 60 2
-  fi
-}
-
-set_config_var() {
-  lua - "$1" "$2" "$3" <<EOF > "$3.bak"
-local key=assert(arg[1])
-local value=assert(arg[2])
-local fn=assert(arg[3])
-local file=assert(io.open(fn))
-local made_change=false
-for line in file:lines() do
-  if line:match("^#?%s*"..key.."=.*$") then
-    line=key.."="..value
-    made_change=true
-  end
-  print(line)
-end
-
-if not made_change then
-  print(key.."="..value)
-end
-EOF
-mv "$3.bak" "$3"
-}
-
-get_config_var() {
-  lua - "$1" "$2" <<EOF
-local key=assert(arg[1])
-local fn=assert(arg[2])
-local file=assert(io.open(fn))
-for line in file:lines() do
-  local val = line:match("^#?%s*"..key.."=(.*)$")
-  if (val ~= nil) then
-    print(val)
-    break
-  end
-end
-EOF
-}
-
-# $1 is 0 to disable overscan, 1 to disable it
-set_overscan() {
-  # Stop if /boot is not a mountpoint
-  if ! mountpoint -q /boot; then
-    return 1
-  fi
-
-  [ -e /boot/config.txt ] || touch /boot/config.txt
-
-  if [ "$1" -eq 0 ]; then # disable overscan
-    sed /boot/config.txt -i -e "s/^overscan_/#overscan_/"
-    set_config_var disable_overscan 1 /boot/config.txt
-  else # enable overscan
-    set_config_var disable_overscan 0 /boot/config.txt
-  fi
-}
-
-do_overscan() {
-  whiptail --yesno "What would you like to do with overscan" 20 60 2 \
-    --yes-button Disable --no-button Enable
-  RET=$?
-  if [ $RET -eq 0 ] || [ $RET -eq 1 ]; then
-    ASK_TO_REBOOT=1
-    set_overscan $RET;
-  else
-    return 1
-  fi
-}
-
-do_change_pass() {
-  whiptail --msgbox "You will now be asked to enter a new password for the pi user" 20 60 1
-  passwd pi &&
-  whiptail --msgbox "Password changed successfully" 20 60 1
-}
-
-do_configure_keyboard() {
-  dpkg-reconfigure keyboard-configuration &&
-  printf "Reloading keymap. This may take a short while\n" &&
-  invoke-rc.d keyboard-setup start
-}
-
-do_change_locale() {
-  dpkg-reconfigure locales
-}
-
-do_change_timezone() {
-  dpkg-reconfigure tzdata
-}
-
-do_change_hostname() {
-  whiptail --msgbox "\
-Please note: RFCs mandate that a hostname's labels \
-may contain only the ASCII letters 'a' through 'z' (case-insensitive), 
-the digits '0' through '9', and the hyphen.
-Hostname labels cannot begin or end with a hyphen. 
-No other symbols, punctuation characters, or blank spaces are permitted.\
-" 20 70 1
-
-  CURRENT_HOSTNAME=`cat /etc/hostname | tr -d " \t\n\r"`
-  NEW_HOSTNAME=$(whiptail --inputbox "Please enter a hostname" 20 60 "$CURRENT_HOSTNAME" 3>&1 1>&2 2>&3)
-  if [ $? -eq 0 ]; then
-    echo $NEW_HOSTNAME > /etc/hostname
-    sed -i "s/127.0.1.1.*$CURRENT_HOSTNAME/127.0.1.1\t$NEW_HOSTNAME/g" /etc/hosts
-    ASK_TO_REBOOT=1
-  fi
-}
-
-do_memory_split() {
-  if [ -e /boot/start_cd.elf ]; then
-    # New-style memory split setting
-    if ! mountpoint -q /boot; then
-      return 1
-    fi
-    ## get current memory split from /boot/config.txt
-    CUR_GPU_MEM=$(get_config_var gpu_mem /boot/config.txt)
-    [ -z "$CUR_GPU_MEM" ] && CUR_GPU_MEM=64
-    ## ask users what gpu_mem they want
-    NEW_GPU_MEM=$(whiptail --inputbox "How much memory should the GPU have?  e.g. 16/32/64/128/256" \
-      20 70 -- "$CUR_GPU_MEM" 3>&1 1>&2 2>&3)
-    if [ $? -eq 0 ]; then
-      set_config_var gpu_mem "$NEW_GPU_MEM" /boot/config.txt
-      ASK_TO_REBOOT=1
-    fi
-  else # Old firmware so do start.elf renaming
-    get_current_memory_split
-    MEMSPLIT=$(whiptail --menu "Set memory split.\n$MEMSPLIT_DESCRIPTION" 20 60 10 \
-      "240" "240MiB for ARM, 16MiB for VideoCore" \
-      "224" "224MiB for ARM, 32MiB for VideoCore" \
-      "192" "192MiB for ARM, 64MiB for VideoCore" \
-      "128" "128MiB for ARM, 128MiB for VideoCore" \
-      3>&1 1>&2 2>&3)
-    if [ $? -eq 0 ]; then
-      set_memory_split ${MEMSPLIT}
-      ASK_TO_REBOOT=1
-    fi
-  fi
-}
-
-get_current_memory_split() {
-  # Stop if /boot is not a mountpoint
-  if ! mountpoint -q /boot; then
-    return 1
-  fi
-  AVAILABLE_SPLITS="128 192 224 240"
-  MEMSPLIT_DESCRIPTION=""
-  for SPLIT in $AVAILABLE_SPLITS;do
-    if [ -e /boot/arm${SPLIT}_start.elf ] && cmp /boot/arm${SPLIT}_start.elf /boot/start.elf >/dev/null 2>&1;then
-      CURRENT_MEMSPLIT=$SPLIT
-      MEMSPLIT_DESCRIPTION="Current: ${CURRENT_MEMSPLIT}MiB for ARM, $((256 - $CURRENT_MEMSPLIT))MiB for VideoCore"
-      break
-    fi
-  done
-}
-
-set_memory_split() {
-  cp -a /boot/arm${1}_start.elf /boot/start.elf
-  sync
-}
-
-do_overclock() {
-  whiptail --msgbox "\
-Be aware that overclocking may reduce the lifetime of your
-Raspberry Pi. If overclocking at a certain level causes
-system instability, try a more modest overclock. Hold down
-shift during boot to temporarily disable overclock.
-See http://elinux.org/RPi_Overclocking for more information.\
-" 20 70 1
-  OVERCLOCK=$(whiptail --menu "Chose overclock preset" 20 60 10 \
-    "None" "700MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \
-    "Modest" "800MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \
-    "Medium" "900MHz ARM, 250MHz core, 450MHz SDRAM, 2 overvolt" \
-    "High" "950MHz ARM, 250MHz core, 450MHz SDRAM, 6 overvolt" \
-    "Turbo" "1000MHz ARM, 500MHz core, 600MHz SDRAM, 6 overvolt" \
-    3>&1 1>&2 2>&3)
-  if [ $? -eq 0 ]; then
-    case "$OVERCLOCK" in
-      None)
-        set_overclock None 700 250 400 0
-        ;;
-      Modest)
-        set_overclock Modest 800 250 400 0
-        ;;
-      Medium)
-        set_overclock Medium 900 250 450 2
-        ;;
-      High)
-        set_overclock High 950 250 450 6
-        ;;
-      Turbo)
-        whiptail --msgbox "Warning: some people have reported SD card corruption with this level of overclock." \
-          20 70 1
-        [ $? -ne 0 ] && return 1
-        set_overclock Turbo 1000 500 600 6
-        ;;
-      *)
-        whiptail --msgbox "Programmer error, unrecognised overclock preset" 20 60 2
-        return 1
-        ;;
-    esac
-    ASK_TO_REBOOT=1
-  fi
-}
-
-set_overclock() {
-  set_config_var arm_freq $2 /boot/config.txt &&
-  set_config_var core_freq $3 /boot/config.txt &&
-  set_config_var sdram_freq $4 /boot/config.txt &&
-  set_config_var over_voltage $5 /boot/config.txt &&
-  # now set up an init.d script
-cat <<\EOF > /etc/init.d/switch_cpu_governor &&
-#!/bin/sh
-### BEGIN INIT INFO
-# Provides:          switch_cpu_governor
-# Required-Start: udev mountkernfs $remote_fs
-# Required-Stop:
-# Default-Start: S
-# Default-Stop:
-# Short-Description: Switch to ondemand cpu governor (unless shift key is pressed)
-# Description:
-### END INIT INFO
-
-. /lib/lsb/init-functions
-
-case "$1" in
-  start)
-    log_daemon_msg "Checking if shift key is held down"
-    timeout 1 thd --dump /dev/input/event* | grep -q "LEFTSHIFT\|RIGHTSHIFT"
-    if [ $? -eq 0 ]; then
-      printf " Yes. Not switching scaling governor"
-      log_end_msg 0
-    else
-      SYS_CPUFREQ_GOVERNOR=/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
-      [ -e $SYS_CPUFREQ_GOVERNOR ] && echo "ondemand" > $SYS_CPUFREQ_GOVERNOR
-      echo 70 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
-      printf " No. Switching to ondemand scaling governor"
-      log_end_msg 0
-    fi
-    ;;
-  *)
-    echo "Usage: $0 start" >&2
-    exit 3
-    ;;
-esac
-EOF
-  chmod +x /etc/init.d/switch_cpu_governor &&
-  update-rc.d switch_cpu_governor defaults &&
-  whiptail --msgbox "Set overclock to preset '$1'" 20 60 2
-}
-
-do_ssh() {
-  if [ -e /var/log/regen_ssh_keys.log ] && ! grep -q "^finished" /var/log/regen_ssh_keys.log; then
-    whiptail --msgbox "Initial ssh key generation still running. Please wait and try again." 20 60 2
-    return 1
-  fi
-  whiptail --yesno "Would you like the SSH server enabled or disabled?" 20 60 2 \
-    --yes-button Enable --no-button Disable
-  RET=$?
-  if [ $RET -eq 0 ]; then
-    update-rc.d ssh enable &&
-    invoke-rc.d ssh start &&
-    whiptail --msgbox "SSH server enabled" 20 60 1
-  elif [ $RET -eq 1 ]; then
-    update-rc.d ssh disable &&
-    whiptail --msgbox "SSH server disabled" 20 60 1
-  else
-    return $RET
-  fi
-}
-
-do_boot_behaviour() {
-  if [ -e /etc/init.d/lightdm ]; then
-    whiptail --yesno "Should we boot straight to desktop?" 20 60 2
-    RET=$?
-    if [ $RET -eq 0 ]; then # yes
-      update-rc.d lightdm enable 2
-      sed /etc/lightdm/lightdm.conf -i -e "s/^#autologin-user=.*/autologin-user=pi/"
-      ASK_TO_REBOOT=1
-    elif [ $RET -eq 1 ]; then # no
-      update-rc.d lightdm disable 2
-      ASK_TO_REBOOT=1
-    else # user hit escape
-      return 1
-    fi
-  else
-    whiptail --msgbox "Do sudo apt-get install lightdm to allow configuration of boot to desktop" 20 60 2
-    return 1
-  fi
-}
-
-do_rastrack() {
-  whiptail --msgbox "\
-Rastrack (http://rastrack.co.uk) is a website run by Ryan Walmsley
-for tracking where people are using Raspberry Pis around the world.
-If you have an internet connection, you can add yourself directly
-using this tool. This is just a bit of fun, not any sort of official
-registration.\
-" 20 70 1
-  if [ $? -ne 0 ]; then
-    return 0;
-  fi
-  UNAME=$(whiptail --inputbox "Username / Nickname For Rastrack Addition" 20 70 3>&1 1>&2 2>&3)
-  if [ $? -ne 0 ]; then
-    return 1;
-  fi
-  EMAIL=$(whiptail --inputbox "Email Address For Rastrack Addition" 20 70 3>&1 1>&2 2>&3)
-  if [ $? -ne 0 ]; then
-    return 1;
-  fi
-  curl --data "name=$UNAME&email=$EMAIL" http://rastrack.co.uk/api.php
-  printf "Hit enter to continue\n"
-  read TMP
-}
-
-# $1 is 0 to disable camera, 1 to enable it
-set_camera() {
-  # Stop if /boot is not a mountpoint
-  if ! mountpoint -q /boot; then
-    return 1
-  fi
-
-  [ -e /boot/config.txt ] || touch /boot/config.txt
-
-  if [ "$1" -eq 0 ]; then # disable camera
-    set_config_var start_file start.elf /boot/config.txt
-    set_config_var fixup_file fixup.dat /boot/config.txt
-  else # enable camera
-    set_config_var start_file start_x.elf /boot/config.txt
-    set_config_var fixup_file fixup_x.dat /boot/config.txt
-    set_config_var gpu_mem 128 /boot/config.txt
-  fi
-}
-
-do_camera() {
-  if [ ! -e /boot/start_x.elf ]; then
-    whiptail --msgbox "Your firmware appears to be out of date (no start_x.elf). Please update" 20 60 2
-    return 1
-  fi
-  whiptail --yesno "Enable support for Raspberry Pi camera?" 20 60 2 \
-    --yes-button Disable --no-button Enable
-  RET=$?
-  if [ $RET -eq 0 ] || [ $RET -eq 1 ]; then
-    ASK_TO_REBOOT=1
-    set_camera $RET;
-  else
-    return 1
-  fi
-}
-
-do_update() {
-  apt-get update &&
-  apt-get install raspi-config &&
-  printf "Sleeping 5 seconds before reloading raspi-config\n" &&
-  sleep 5 &&
-  exec raspi-config
-}
-
-do_finish() {
-  if [ -e /etc/profile.d/raspi-config.sh ]; then
-    rm -f /etc/profile.d/raspi-config.sh
-    sed -i /etc/inittab \
-      -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \
-      -e "/#\s*RPICFG_TO_DISABLE/d"
-    telinit q
-  fi
-  if [ $ASK_TO_REBOOT -eq 1 ]; then
-    whiptail --yesno "Would you like to reboot now?" 20 60 2
-    if [ $? -eq 0 ]; then # yes
-      sync
-      reboot
-    fi
-  fi
-  exit 0
-}
-
-#
-# Command line options for non-interactive use
-#
-for i in $*
-do
-  case $i in
-  --memory-split)
-    OPT_MEMORY_SPLIT=GET
-    printf "Not currently supported\n"
-    exit 1
-    ;;
-  --memory-split=*)
-    OPT_MEMORY_SPLIT=`echo $i | sed 's/[-a-zA-Z0-9]*=//'`
-    printf "Not currently supported\n"
-    exit 1
-    ;;
-  --expand-rootfs)
-    INTERACTIVE=False
-    do_expand_rootfs
-    printf "Please reboot\n"
-    exit 0
-    ;;
-  *)
-    # unknown option
-    ;;
-  esac
-done
-
-#if [ "GET" = "${OPT_MEMORY_SPLIT:-}" ]; then
-#  set -u # Fail on unset variables
-#  get_current_memory_split
-#  echo $CURRENT_MEMSPLIT
-#  exit 0
-#fi
-
-# Everything else needs to be run as root
-if [ $(id -u) -ne 0 ]; then
-  printf "Script must be run as root. Try 'sudo raspi-config'\n"
-  exit 1
-fi
-
-if [ -n "${OPT_MEMORY_SPLIT:-}" ]; then
-  set -e # Fail when a command errors
-  set_memory_split "${OPT_MEMORY_SPLIT}"
-  exit 0
-fi
-
-#
-# Interactive use loop
-#
-while true; do
-  FUN=$(whiptail --menu "Raspi-config" 20 80 13 --cancel-button Finish --ok-button Select \
-    "info" "Information about this tool" \
-    "expand_rootfs" "Expand root partition to fill SD card" \
-    "overscan" "Change overscan" \
-    "configure_keyboard" "Set keyboard layout" \
-    "change_pass" "Change password for 'pi' user" \
-    "change_locale" "Set locale" \
-    "change_timezone" "Set timezone" \
-    "change_hostname" "Set hostname" \
-    "memory_split" "Change memory split" \
-    "overclock" "Configure overclocking" \
-    "ssh" "Enable or disable ssh server" \
-    "boot_behaviour" "Start desktop on boot?" \
-    "camera" "Enable/Disable camera addon support" \
-    "rastrack" "Add this Pi to the Raspberry Pi Map - Rastrack" \
-    "update" "Try to upgrade raspi-config" \
-    3>&1 1>&2 2>&3)
-  RET=$?
-  if [ $RET -eq 1 ]; then
-    do_finish
-  elif [ $RET -eq 0 ]; then
-    "do_$FUN" || whiptail --msgbox "There was an error running do_$FUN" 20 60 1
-  else
-    exit 1
-  fi
-done

debian/raspi-config/usr/share/doc/raspi-config/LICENSE

@@ -1,26 +0,0 @@
-raspi-config is licensed under the terms of the MIT license reproduced below.
-
-#####################################################
-
-Copyright (c) 2012 Alex Bradbury <asb@asbradbury.org>
-
-Permission is hereby granted, free of charge, to any person
-obtaining a copy of this software and associated documentation
-files (the "Software"), to deal in the Software without
-restriction, including without limitation the rights to use,
-copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the
-Software is furnished to do so, subject to the following
-conditions:
-
-The above copyright notice and this permission notice shall be
-included in all copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-OTHER DEALINGS IN THE SOFTWARE.

debian/raspi-config/usr/share/doc/raspi-config/sample_profile_d.sh

@@ -1,18 +0,0 @@
-#!/bin/sh
-# Part of raspi-config http://github.com/asb/raspi-config
-#
-# See LICENSE file for copyright and license details
-
-# Should be installed to /etc/profile.d/raspi-config.sh to force raspi-config 
-# to run at initial login
-
-# You may also want to set automatic login in /etc/inittab on tty1 by adding a 
-# line such as:
-# 1:2345:respawn:/bin/login -f root tty1 </dev/tty1 >/dev/tty1 2>&1 # RPICFG_TO_DISABLE
-
-if [ $(id -u) -ne 0 ]; then
-  printf "\nNOTICE: the software on this Raspberry Pi has not been fully configured. Please run 'sudo raspi-config'\n\n"
-else
-  raspi-config
-  exec login -f pi
-fi