brain-config/raspi-config

#!/bin/sh
# Part of raspi-config https://github.com/RPi-Distro/raspi-config
#
# See LICENSE file for copyright and license details

INTERACTIVE=True
ASK_TO_REBOOT=0
BLACKLIST=/etc/modprobe.d/raspi-blacklist.conf
CONFIG=/boot/config.txt

is_pi () {
	grep -q "^model name\s*:\s*ARMv" /proc/cpuinfo
	return $?
}

if is_pi ; then
  CMDLINE=/boot/cmdline.txt
else
  CMDLINE=/proc/cmdline
fi

is_pione() {
   if grep -q "^Revision\s*:\s*00[0-9a-fA-F][0-9a-fA-F]$" /proc/cpuinfo; then
      return 0
   elif grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[0-36][0-9a-fA-F]$" /proc/cpuinfo ; then
      return 0
   else
      return 1
   fi
}

is_pitwo() {
   grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]04[0-9a-fA-F]$" /proc/cpuinfo
   return $?
}

is_pizero() {
   grep -q "^Revision\s*:\s*[ 123][0-9a-fA-F][0-9a-fA-F][0-9a-fA-F]0[9cC][0-9a-fA-F]$" /proc/cpuinfo
   return $?
}

get_pi_type() {
   if is_pione; then
      echo 1
   elif is_pitwo; then
      echo 2
   else
      echo 0
   fi
}

is_live() {
    grep -q "boot=live" $CMDLINE
    return $?
}

is_ssh() {
  if pstree -p | egrep --quiet --extended-regexp ".*sshd.*\($$\)"; then
    return 0
  else
    return 1
  fi
}

get_init_sys() {
  if command -v systemctl > /dev/null && systemctl | grep -q '\-\.mount'; then
    SYSTEMD=1
  elif [ -f /etc/init.d/cron ] && [ ! -h /etc/init.d/cron ]; then
    SYSTEMD=0
  else
    echo "Unrecognised init system"
    return 1
  fi
}

calc_wt_size() {
  # NOTE: it's tempting to redirect stderr to /dev/null, so supress error 
  # output from tput. However in this case, tput detects neither stdout or 
  # stderr is a tty and so only gives default 80, 24 values
  WT_HEIGHT=17
  WT_WIDTH=$(tput cols)

  if [ -z "$WT_WIDTH" ] || [ "$WT_WIDTH" -lt 60 ]; then
    WT_WIDTH=80
  fi
  if [ "$WT_WIDTH" -gt 178 ]; then
    WT_WIDTH=120
  fi
  WT_MENU_HEIGHT=$(($WT_HEIGHT-7))
}

do_about() {
  whiptail --msgbox "\
This tool provides a straight-forward way of doing initial
configuration of the Raspberry Pi. Although it can be run
at any time, some of the options may have difficulties if
you have heavily customised your installation.\
" 20 70 1
}

get_can_expand() {
  get_init_sys
  if [ $SYSTEMD -eq 1 ]; then
    ROOT_PART=$(mount | sed -n 's|^/dev/\(.*\) on / .*|\1|p')
  else
    if ! [ -h /dev/root ]; then
      echo 1
      exit
    fi
    ROOT_PART=$(readlink /dev/root)
  fi

  PART_NUM=${ROOT_PART#mmcblk0p}
  if [ "$PART_NUM" = "$ROOT_PART" ]; then
    echo 1
    exit
  fi

  if [ "$PART_NUM" -ne 2 ]; then
    echo 1
    exit
  fi

  LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:)
  if [ $LAST_PART_NUM -ne $PART_NUM ]; then
    echo 1
    exit
  fi
  echo 0
}

do_expand_rootfs() {
  get_init_sys
  if [ $SYSTEMD -eq 1 ]; then
    ROOT_PART=$(mount | sed -n 's|^/dev/\(.*\) on / .*|\1|p')
  else
    if ! [ -h /dev/root ]; then
      whiptail --msgbox "/dev/root does not exist or is not a symlink. Don't know how to expand" 20 60 2
      return 0
    fi
    ROOT_PART=$(readlink /dev/root)
  fi

  PART_NUM=${ROOT_PART#mmcblk0p}
  if [ "$PART_NUM" = "$ROOT_PART" ]; then
    whiptail --msgbox "$ROOT_PART is not an SD card. Don't know how to expand" 20 60 2
    return 0
  fi

  # NOTE: the NOOBS partition layout confuses parted. For now, let's only 
  # agree to work with a sufficiently simple partition layout
  if [ "$PART_NUM" -ne 2 ]; then
    whiptail --msgbox "Your partition layout is not currently supported by this tool. You are probably using NOOBS, in which case your root filesystem is already expanded anyway." 20 60 2
    return 0
  fi

  LAST_PART_NUM=$(parted /dev/mmcblk0 -ms unit s p | tail -n 1 | cut -f 1 -d:)
  if [ $LAST_PART_NUM -ne $PART_NUM ]; then
    whiptail --msgbox "$ROOT_PART is not the last partition. Don't know how to expand" 20 60 2
    return 0
  fi

  # Get the starting offset of the root partition
  PART_START=$(parted /dev/mmcblk0 -ms unit s p | grep "^${PART_NUM}" | cut -f 2 -d: | sed 's/[^0-9]//g')
  [ "$PART_START" ] || return 1
  # Return value will likely be error for fdisk as it fails to reload the
  # partition table because the root fs is mounted
  fdisk /dev/mmcblk0 <<EOF
p
d
$PART_NUM
n
p
$PART_NUM
$PART_START

p
w
EOF
  ASK_TO_REBOOT=1

  # now set up an init.d script
cat <<EOF > /etc/init.d/resize2fs_once &&
#!/bin/sh
### BEGIN INIT INFO
# Provides:          resize2fs_once
# Required-Start:
# Required-Stop:
# Default-Start: 3
# Default-Stop:
# Short-Description: Resize the root filesystem to fill partition
# Description:
### END INIT INFO

. /lib/lsb/init-functions

case "\$1" in
  start)
    log_daemon_msg "Starting resize2fs_once" &&
    resize2fs /dev/$ROOT_PART &&
    update-rc.d resize2fs_once remove &&
    rm /etc/init.d/resize2fs_once &&
    log_end_msg \$?
    ;;
  *)
    echo "Usage: \$0 start" >&2
    exit 3
    ;;
esac
EOF
  chmod +x /etc/init.d/resize2fs_once &&
  update-rc.d resize2fs_once defaults &&
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Root partition has been resized.\nThe filesystem will be enlarged upon the next reboot" 20 60 2
  fi
}

set_config_var() {
  lua - "$1" "$2" "$3" <<EOF > "$3.bak"
local key=assert(arg[1])
local value=assert(arg[2])
local fn=assert(arg[3])
local file=assert(io.open(fn))
local made_change=false
for line in file:lines() do
  if line:match("^#?%s*"..key.."=.*$") then
    line=key.."="..value
    made_change=true
  end
  print(line)
end

if not made_change then
  print(key.."="..value)
end
EOF
mv "$3.bak" "$3"
}

clear_config_var() {
  lua - "$1" "$2" <<EOF > "$2.bak"
local key=assert(arg[1])
local fn=assert(arg[2])
local file=assert(io.open(fn))
for line in file:lines() do
  if line:match("^%s*"..key.."=.*$") then
    line="#"..line
  end
  print(line)
end
EOF
mv "$2.bak" "$2"
}

get_config_var() {
  lua - "$1" "$2" <<EOF
local key=assert(arg[1])
local fn=assert(arg[2])
local file=assert(io.open(fn))
local found=false
for line in file:lines() do
  local val = line:match("^%s*"..key.."=(.*)$")
  if (val ~= nil) then
    print(val)
    found=true
    break
  end
end
if not found then
   print(0)
end
EOF
}

get_overscan() {
  OVS=$(get_config_var disable_overscan $CONFIG)
  if [ $OVS -eq 1 ]; then
    echo 1
  else
    echo 0
  fi
}

do_overscan() {
  DEFAULT=--defaultno
  CURRENT=0
  if [ $(get_overscan) -eq 0 ]; then
      DEFAULT=
      CURRENT=1
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like to enable compensation for displays with overscan?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq $CURRENT ]; then
    ASK_TO_REBOOT=1
  fi
  if [ $RET -eq 0 ] ; then
    set_config_var disable_overscan 0 $CONFIG
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    sed $CONFIG -i -e "s/^overscan_/#overscan_/"
    set_config_var disable_overscan 1 $CONFIG
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Display overscan compensation is $STATUS" 20 60 1
  fi
}

do_change_pass() {
  whiptail --msgbox "You will now be asked to enter a new password for the pi user" 20 60 1
  passwd pi &&
  whiptail --msgbox "Password changed successfully" 20 60 1
}

do_configure_keyboard() {
  dpkg-reconfigure keyboard-configuration &&
  printf "Reloading keymap. This may take a short while\n" &&
  invoke-rc.d keyboard-setup start || return $?
  udevadm trigger --subsystem-match=input --action=change
  return 0
}

do_change_locale() {
  dpkg-reconfigure locales
}

do_change_timezone() {
  dpkg-reconfigure tzdata
}

get_wifi_country() {
   grep country= /etc/wpa_supplicant/wpa_supplicant.conf | cut -d "=" -f 2
}

do_wifi_country() {
  oIFS="$IFS"
  if [ "$INTERACTIVE" = True ]; then
    IFS="/"
    value=$(cat /usr/share/zoneinfo/iso3166.tab | tail -n +26 | tr '\t' '/' | tr '\n' '/')
    COUNTRY=$(whiptail --menu "Select the country in which the Pi is to be used" 20 60 10 ${value} 3>&1 1>&2 2>&3)
  else
    COUNTRY=$1
    true
  fi
  if [ $? -eq 0 ];then
    if [ -e /etc/wpa_supplicant/wpa_supplicant.conf ]; then
        if grep -q "^country=" /etc/wpa_supplicant/wpa_supplicant.conf ; then
            sed -i --follow-symlinks "s/^country=.*/country=$COUNTRY/g" /etc/wpa_supplicant/wpa_supplicant.conf
        else
            sed -i --follow-symlinks "1i country=$COUNTRY" /etc/wpa_supplicant/wpa_supplicant.conf
        fi
    else
        echo "country=$COUNTRY" > /etc/wpa_supplicant/wpa_supplicant.conf
    fi
    if [ "$INTERACTIVE" = True ]; then
        whiptail --msgbox "Wi-fi country set to $COUNTRY" 20 60 1
    fi
    ASK_TO_REBOOT=1
  fi
  IFS=$oIFS
}

get_hostname() {
    cat /etc/hostname | tr -d " \t\n\r"
}

do_hostname() {
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "\
Please note: RFCs mandate that a hostname's labels \
may contain only the ASCII letters 'a' through 'z' (case-insensitive), 
the digits '0' through '9', and the hyphen.
Hostname labels cannot begin or end with a hyphen. 
No other symbols, punctuation characters, or blank spaces are permitted.\
" 20 70 1
  fi
  CURRENT_HOSTNAME=`cat /etc/hostname | tr -d " \t\n\r"`
  if [ "$INTERACTIVE" = True ]; then
    NEW_HOSTNAME=$(whiptail --inputbox "Please enter a hostname" 20 60 "$CURRENT_HOSTNAME" 3>&1 1>&2 2>&3)
  else
    NEW_HOSTNAME=$1
    true
  fi
  if [ $? -eq 0 ]; then
    echo $NEW_HOSTNAME > /etc/hostname
    sed -i "s/127.0.1.1.*$CURRENT_HOSTNAME/127.0.1.1\t$NEW_HOSTNAME/g" /etc/hosts
    ASK_TO_REBOOT=1
  fi
}

do_memory_split() { # Memory Split
  if [ -e /boot/start_cd.elf ]; then
    # New-style memory split setting
    ## get current memory split from /boot/config.txt
	arm=$(vcgencmd get_mem arm | cut -d '=' -f 2 | cut -d 'M' -f 1)
	gpu=$(vcgencmd get_mem gpu | cut -d '=' -f 2 | cut -d 'M' -f 1)
	tot=$(($arm+$gpu))
    if [ $tot -gt 512 ]; then
		CUR_GPU_MEM=$(get_config_var gpu_mem_1024 $CONFIG)
	elif [ $tot -gt 256 ]; then
		CUR_GPU_MEM=$(get_config_var gpu_mem_512 $CONFIG)
	else
		CUR_GPU_MEM=$(get_config_var gpu_mem_256 $CONFIG)
	fi
    if [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ]; then
		CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG)
	fi
    [ -z "$CUR_GPU_MEM" ] || [ $CUR_GPU_MEM = "0" ] && CUR_GPU_MEM=64
    ## ask users what gpu_mem they want
    if [ "$INTERACTIVE" = True ]; then
      NEW_GPU_MEM=$(whiptail --inputbox "How much memory should the GPU have?  e.g. 16/32/64/128/256" \
        20 70 -- "$CUR_GPU_MEM" 3>&1 1>&2 2>&3)
    else
      NEW_GPU_MEM=$1
      true
    fi
    if [ $? -eq 0 ]; then
	  if [ $(get_config_var gpu_mem_1024 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_512 $CONFIG) != "0" ] || [ $(get_config_var gpu_mem_256 $CONFIG) != "0" ]; then
        if [ "$INTERACTIVE" = True ]; then
		  whiptail --msgbox "Device-specific memory settings were found. These have been cleared." 20 60 2
		fi
		clear_config_var gpu_mem_1024 $CONFIG
		clear_config_var gpu_mem_512 $CONFIG
		clear_config_var gpu_mem_256 $CONFIG
	  fi
      set_config_var gpu_mem "$NEW_GPU_MEM" $CONFIG
      ASK_TO_REBOOT=1
    fi
  else # Old firmware so do start.elf renaming
    get_current_memory_split
    MEMSPLIT=$(whiptail --menu "Set memory split.\n$MEMSPLIT_DESCRIPTION" 20 60 10 \
      "240" "240MiB for ARM, 16MiB for VideoCore" \
      "224" "224MiB for ARM, 32MiB for VideoCore" \
      "192" "192MiB for ARM, 64MiB for VideoCore" \
      "128" "128MiB for ARM, 128MiB for VideoCore" \
      3>&1 1>&2 2>&3)
    if [ $? -eq 0 ]; then
      set_memory_split ${MEMSPLIT}
      ASK_TO_REBOOT=1
    fi
  fi
}

get_current_memory_split() {
  AVAILABLE_SPLITS="128 192 224 240"
  MEMSPLIT_DESCRIPTION=""
  for SPLIT in $AVAILABLE_SPLITS;do
    if [ -e /boot/arm${SPLIT}_start.elf ] && cmp /boot/arm${SPLIT}_start.elf /boot/start.elf >/dev/null 2>&1;then
      CURRENT_MEMSPLIT=$SPLIT
      MEMSPLIT_DESCRIPTION="Current: ${CURRENT_MEMSPLIT}MiB for ARM, $((256 - $CURRENT_MEMSPLIT))MiB for VideoCore"
      break
    fi
  done
}

set_memory_split() {
  cp -a /boot/arm${1}_start.elf /boot/start.elf
  sync
}

do_overclock() {
  if ! is_pione && ! is_pitwo; then
    whiptail --msgbox "This Pi cannot be overclocked." 20 60 2
    return 1
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "\
Be aware that overclocking may reduce the lifetime of your
Raspberry Pi. If overclocking at a certain level causes
system instability, try a more modest overclock. Hold down
shift during boot to temporarily disable overclock.
See http://elinux.org/RPi_Overclocking for more information.\
" 20 70 1
   if is_pione; then
    OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \
      "None" "700MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \
      "Modest" "800MHz ARM, 250MHz core, 400MHz SDRAM, 0 overvolt" \
      "Medium" "900MHz ARM, 250MHz core, 450MHz SDRAM, 2 overvolt" \
      "High" "950MHz ARM, 250MHz core, 450MHz SDRAM, 6 overvolt" \
      "Turbo" "1000MHz ARM, 500MHz core, 600MHz SDRAM, 6 overvolt" \
      3>&1 1>&2 2>&3)
   elif is_pitwo; then
    OVERCLOCK=$(whiptail --menu "Choose overclock preset" 20 60 10 \
      "None" "900MHz ARM, 250MHz core, 450MHz SDRAM, 0 overvolt" \
      "High" "1000MHz ARM, 500MHz core, 500MHz SDRAM, 2 overvolt" \
      3>&1 1>&2 2>&3)
   fi
  else
    OVERCLOCK=$1
    true
  fi
  if [ $? -eq 0 ]; then
    case "$OVERCLOCK" in
      None)
        clear_overclock
        ;;
      Modest)
        set_overclock Modest 800 250 400 0
        ;;
      Medium)
        set_overclock Medium 900 250 450 2
        ;;
      High)
        if is_pione; then
          set_overclock High 950 250 450 6
        else
          set_overclock High 1000 500 500 2
        fi
        ;;
      Turbo)
        set_overclock Turbo 1000 500 600 6
        ;;
      *)
        whiptail --msgbox "Programmer error, unrecognised overclock preset" 20 60 2
        return 1
        ;;
    esac
    ASK_TO_REBOOT=1
  fi
}

set_overclock() {
  set_config_var arm_freq $2 $CONFIG &&
  set_config_var core_freq $3 $CONFIG &&
  set_config_var sdram_freq $4 $CONFIG &&
  set_config_var over_voltage $5 $CONFIG &&
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Set overclock to preset '$1'" 20 60 2
  fi
}

clear_overclock () {
  clear_config_var arm_freq $CONFIG &&
  clear_config_var core_freq $CONFIG &&
  clear_config_var sdram_freq $CONFIG &&
  clear_config_var over_voltage $CONFIG &&
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Set overclock to preset 'None'" 20 60 2
  fi
}

get_ssh() {
  if service ssh status | grep -q inactive; then
    echo 1
  else
    echo 0
  fi
}

do_ssh() {
  if [ -e /var/log/regen_ssh_keys.log ] && ! grep -q "^finished" /var/log/regen_ssh_keys.log; then
    whiptail --msgbox "Initial ssh key generation still running. Please wait and try again." 20 60 2
    return 1
  fi
  DEFAULT=--defaultno
  if [ $(get_ssh) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the SSH server to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    update-rc.d ssh enable &&
    invoke-rc.d ssh start &&
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    update-rc.d ssh disable &&
    invoke-rc.d ssh stop &&
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The SSH server is $STATUS" 20 60 1
  fi
}

get_vnc() {
  if systemctl status vncserver-x11-serviced.service  | grep -q inactive; then
    echo 1
  else
    echo 0
  fi
}

do_vnc() {
  DEFAULT=--defaultno
  if [ $(get_vnc) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the VNC Server to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    if [ ! -d /usr/share/doc/realvnc-vnc-server ] ; then
        sudo apt-get install realvnc-vnc-server
    fi
    systemctl enable vncserver-x11-serviced.service &&
    systemctl start vncserver-x11-serviced.service &&
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    systemctl disable vncserver-x11-serviced.service &&
    systemctl stop vncserver-x11-serviced.service &&
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The VNC Server is $STATUS" 20 60 1
  fi
}

get_spi() {
  if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*spi(=(on|true|yes|1))?(,.*)?$" $CONFIG; then
    echo 0
  else
    echo 1
  fi
}

do_spi() {
  DEFAULT=--defaultno
  if [ $(get_spi) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the SPI interface to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    SETTING=on
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    SETTING=off
    STATUS=disabled
  else
    return $RET
  fi

  set_config_var dtparam=spi $SETTING $CONFIG &&
  if ! [ -e $BLACKLIST ]; then
    touch $BLACKLIST
  fi
  sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*spi[-_]bcm2708\)/#\1/"
  dtparam spi=$SETTING

  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The SPI interface is $STATUS" 20 60 1
  fi
}

get_i2c() {
  if grep -q -E "^(device_tree_param|dtparam)=([^,]*,)*i2c(_arm)?(=(on|true|yes|1))?(,.*)?$" $CONFIG; then
    echo 0
  else
    echo 1
  fi
}

do_i2c() {
  DEFAULT=--defaultno
  if [ $(get_i2c) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the ARM I2C interface to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    SETTING=on
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    SETTING=off
    STATUS=disabled
  else
    return $RET
  fi

  set_config_var dtparam=i2c_arm $SETTING $CONFIG &&
  if ! [ -e $BLACKLIST ]; then
    touch $BLACKLIST
  fi
  sed $BLACKLIST -i -e "s/^\(blacklist[[:space:]]*i2c[-_]bcm2708\)/#\1/"
  sed /etc/modules -i -e "s/^#[[:space:]]*\(i2c[-_]dev\)/\1/"
  if ! grep -q "^i2c[-_]dev" /etc/modules; then
    printf "i2c-dev\n" >> /etc/modules
  fi
  dtparam i2c_arm=$SETTING
  modprobe i2c-dev

  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The ARM I2C interface is $STATUS" 20 60 1
  fi
}

get_serial() {
  if grep -q -E "console=(serial0|ttyAMA0|ttyS0)" $CMDLINE ; then
    echo 0
  else
    echo 1
  fi
}

get_serial_hw() {
  if grep -q -E "^enable_uart=1" $CONFIG ; then
    echo 0
  elif grep -q -E "^enable_uart=0" $CONFIG ; then
    echo 1
  elif [ -e /dev/serial0 ] ; then
    echo 0
  else
    echo 1
  fi
}

do_serial() {
  DEFAULTS=--defaultno
  DEFAULTH=--defaultno
  CURRENTS=0
  CURRENTH=0
  if [ $(get_serial) -eq 0 ]; then
      DEFAULTS=
      CURRENTS=1
  fi
  if [ $(get_serial_hw) -eq 0 ]; then
      DEFAULTH=
      CURRENTH=1
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like a login shell to be accessible over serial?" $DEFAULTS 20 60 2
    RET=$?
  else
    get_init_sys
    RET=$1
  fi
  if [ $RET -eq $CURRENTS ]; then
    ASK_TO_REBOOT=1
  fi
  if [ $RET -eq 0 ]; then
    if [ $SYSTEMD -eq 0 ]; then
      sed -i /etc/inittab -e "s|^#\(.*:.*:respawn:.*ttyAMA0\)|\1|"
      if ! grep -q "^T.*:.*:respawn:.*ttyAMA0" /etc/inittab; then
        printf "T0:23:respawn:/sbin/getty -L ttyAMA0 115200 vt100\n" >> /etc/inittab
      fi
    fi
    if grep -q "console=ttyAMA0" $CMDLINE ; then
      if [ -e /proc/device-tree/aliases/serial0 ]; then
        sed -i $CMDLINE -e "s/console=ttyAMA0/console=serial0/"
      fi
    elif ! grep -q "console=ttyAMA0" $CMDLINE && ! grep -q "console=serial0" $CMDLINE ; then
      if [ -e /proc/device-tree/aliases/serial0 ]; then
        sed -i $CMDLINE -e "s/root=/console=serial0,115200 root=/"
      else
        sed -i $CMDLINE -e "s/root=/console=ttyAMA0,115200 root=/"
      fi
    fi
    set_config_var enable_uart 1 $CONFIG
    SSTATUS=enabled
    HSTATUS=enabled
  elif [ $RET -eq 1 ]; then
    if [ $SYSTEMD -eq 0 ]; then
      sed -i /etc/inittab -e "s|^.*:.*:respawn:.*ttyAMA0|#&|"
    fi
    sed -i $CMDLINE -e "s/console=ttyAMA0,[0-9]\+ //"
    sed -i $CMDLINE -e "s/console=serial0,[0-9]\+ //"
    SSTATUS=disabled
    if [ "$INTERACTIVE" = True ]; then
      whiptail --yesno "Would you like the serial port hardware to be enabled?" $DEFAULTH 20 60 2
      RET=$?
    else
      RET=1
    fi
    if [ $RET -eq $CURRENTH ]; then
     ASK_TO_REBOOT=1
    fi
    if [ $RET -eq 0 ]; then
      set_config_var enable_uart 1 $CONFIG
      HSTATUS=enabled
    elif [ $RET -eq 1 ]; then
      set_config_var enable_uart 0 $CONFIG
      HSTATUS=disabled
    else
      return $RET
    fi
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "The serial login shell is $SSTATUS\nThe serial interface is $HSTATUS" 20 60 1
  fi
}

disable_raspi_config_at_boot() {
  if [ -e /etc/profile.d/raspi-config.sh ]; then
    rm -f /etc/profile.d/raspi-config.sh
    if [ $SYSTEMD -eq 1 ]; then
      if [ -e /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf ]; then
        rm /etc/systemd/system/getty@tty1.service.d/raspi-config-override.conf
      fi
    else
      sed -i /etc/inittab \
        -e "s/^#\(.*\)#\s*RPICFG_TO_ENABLE\s*/\1/" \
        -e "/#\s*RPICFG_TO_DISABLE/d"
    fi
    telinit q
  fi
}

get_boot_cli() {
  if systemctl get-default | grep -q multi-user ; then
    echo 0
  else
    echo 1
  fi
}

get_autologin() {
  get_init_sys
  if [ $(get_boot_cli) -eq 0 ]; then
    # booting to CLI - check the autologin in getty or initd */
    if [ $SYSTEMD -eq 1 ]; then
      # systemd used - check getty */
      if grep -q autologin /etc/systemd/system/getty.target.wants/getty@tty1.service ; then
        echo 0
      else
        echo 1
      fi
    else
      # systemd not used - check initd */
      if grep -q login /etc/inittab ; then
        echo 0
      else
        echo 1
      fi
    fi
  else
    # booting to desktop - check the autologin for lightdm */
    if grep -q "^autologin-user=pi" /etc/lightdm/lightdm.conf ; then
      echo 0
    else
      echo 1
    fi
  fi
}

do_boot_behaviour() {
  if [ "$INTERACTIVE" = True ]; then
    BOOTOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \
      "B1 Console" "Text console, requiring user to login" \
      "B2 Console Autologin" "Text console, automatically logged in as 'pi' user" \
      "B3 Desktop" "Desktop GUI, requiring user to login" \
      "B4 Desktop Autologin" "Desktop GUI, automatically logged in as 'pi' user" \
      3>&1 1>&2 2>&3)
  else
    get_init_sys
    BOOTOPT=$1
    true
  fi
  if [ $? -eq 0 ]; then
    case "$BOOTOPT" in
      B1*)
        if [ $SYSTEMD -eq 1 ]; then
          systemctl set-default multi-user.target
          ln -fs /lib/systemd/system/getty@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
        else
          [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2
          sed /etc/inittab -i -e "s/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/"
        fi
        ;;
      B2*)
        if [ $SYSTEMD -eq 1 ]; then
          systemctl set-default multi-user.target
          ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
        else
          [ -e /etc/init.d/lightdm ] && update-rc.d lightdm disable 2
          sed /etc/inittab -i -e "s/1:2345:respawn:\/sbin\/getty --noclear 38400 tty1/1:2345:respawn:\/bin\/login -f pi tty1 <\/dev\/tty1 >\/dev\/tty1 2>&1/"
        fi
        ;;
      B3*)
        if [ -e /etc/init.d/lightdm ]; then
          if [ $SYSTEMD -eq 1 ]; then
            systemctl set-default graphical.target
            ln -fs /lib/systemd/system/getty@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
          else
            update-rc.d lightdm enable 2
          fi
          sed /etc/lightdm/lightdm.conf -i -e "s/^autologin-user=.*/#autologin-user=/"
          disable_raspi_config_at_boot
        else
          whiptail --msgbox "Do sudo apt-get install lightdm to allow configuration of boot to desktop" 20 60 2
          return 1
        fi
        ;;
      B4*)
        if [ -e /etc/init.d/lightdm ]; then
          if id -u pi > /dev/null 2>&1; then
            if [ $SYSTEMD -eq 1 ]; then
              systemctl set-default graphical.target
              ln -fs /etc/systemd/system/autologin@.service /etc/systemd/system/getty.target.wants/getty@tty1.service
            else
              update-rc.d lightdm enable 2
            fi
            sed /etc/lightdm/lightdm.conf -i -e "s/^\(#\|\)autologin-user=.*/autologin-user=pi/"
            disable_raspi_config_at_boot
          else
            whiptail --msgbox "The pi user has been removed, can't set up boot to desktop" 20 60 2
          fi
        else
          whiptail --msgbox "Do sudo apt-get install lightdm to allow configuration of boot to desktop" 20 60 2
          return 1
        fi
        ;;
      *)
        whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2
        return 1
        ;;
    esac
    ASK_TO_REBOOT=1
  fi
}

get_boot_wait() {
  if test -e /etc/systemd/system/dhcpcd.service.d/wait.conf; then
    echo 0
  else
    echo 1
  fi
}

do_boot_wait() {
  get_init_sys
  if [ $SYSTEMD -eq 0 ]; then
    whiptail --msgbox "This option can only be selected when using systemd" 20 60 2
    return 1
  fi

  DEFAULT=--defaultno
  if [ $(get_boot_wait) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like boot to wait until a network connection is established?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    mkdir -p /etc/systemd/system/dhcpcd.service.d/
    cat > /etc/systemd/system/dhcpcd.service.d/wait.conf << EOF
[Service]
ExecStart=
ExecStart=/sbin/dhcpcd -q -w
EOF
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    rm -f /etc/systemd/system/dhcpcd.service.d/wait.conf
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Waiting for network on boot is $STATUS" 20 60 1
  fi
}

get_boot_splash() {
  if is_pi ; then
    if grep -q "splash" $CMDLINE ; then
      echo 0
    else
      echo 1
    fi
  else
    if grep -q "GRUB_CMDLINE_LINUX_DEFAULT.*splash" /etc/default/grub ; then
      echo 0
    else
      echo 1
    fi
  fi
}

do_boot_splash() {
  if [ ! -e /usr/share/plymouth/themes/pix/pix.script ]; then
    if [ "$INTERACTIVE" = True ]; then
      whiptail --msgbox "The splash screen is not installed so cannot be activated" 20 60 2
    fi
    return 1
  fi
  DEFAULT=--defaultno
  if [ $(get_boot_splash) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like to show the splash screen at boot?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
	if is_pi ; then
		if ! grep -q "splash" $CMDLINE ; then
			sed -i $CMDLINE -e "s/$/ quiet splash plymouth.ignore-serial-consoles/"
		fi
	else
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1 quiet splash plymouth.ignore-serial-consoles\"/"
		sed -i /etc/default/grub -e "s/  \+/ /g"
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/"
		update-grub
	fi
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
	if is_pi ; then
		if grep -q "splash" $CMDLINE ; then
			sed -i $CMDLINE -e "s/ quiet//"
			sed -i $CMDLINE -e "s/ splash//"
			sed -i $CMDLINE -e "s/ plymouth.ignore-serial-consoles//"
		fi
	else
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)quiet\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/"
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)splash\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/"
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\"\(.*\)plymouth.ignore-serial-consoles\(.*\)\"/GRUB_CMDLINE_LINUX_DEFAULT=\"\1\2\"/"
		sed -i /etc/default/grub -e "s/  \+/ /g"
		sed -i /etc/default/grub -e "s/GRUB_CMDLINE_LINUX_DEFAULT=\" /GRUB_CMDLINE_LINUX_DEFAULT=\"/"
		update-grub
	fi
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Splash screen at boot is $STATUS" 20 60 1
  fi
}

get_rgpio() {
  if test -e /etc/systemd/system/pigpiod.service.d/public.conf; then
    echo 0
  else
    echo 1
  fi
}

do_rgpio() {
  get_init_sys
  if [ $SYSTEMD -eq 0 ]; then
    whiptail --msgbox "This option can only be selected when using systemd" 20 60 2
    return 1
  fi

  DEFAULT=--defaultno
  if [ $(get_rgpio) -eq 0 ]; then
    DEFAULT=
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the GPIO server to be accessible over the network?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq 0 ]; then
    mkdir -p /etc/systemd/system/pigpiod.service.d/
    cat > /etc/systemd/system/pigpiod.service.d/public.conf << EOF
[Service]
ExecStart=
ExecStart=/usr/bin/pigpiod
EOF
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    rm -f /etc/systemd/system/pigpiod.service.d/public.conf
    STATUS=disabled
  else
    return $RET
  fi
  systemctl daemon-reload
  systemctl restart pigpiod
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "Remote access to the GPIO server is $STATUS" 20 60 1
  fi
}

get_camera() {
  CAM=$(get_config_var start_x $CONFIG)
  if [ $CAM -eq 1 ]; then
    echo 0
  else
    echo 1
  fi
}

do_camera() {
  if [ ! -e /boot/start_x.elf ]; then
    whiptail --msgbox "Your firmware appears to be out of date (no start_x.elf). Please update" 20 60 2
    return 1
  fi
  sed $CONFIG -i -e "s/^startx/#startx/"
  sed $CONFIG -i -e "s/^fixup_file/#fixup_file/"

  DEFAULT=--defaultno
  CURRENT=0
  if [ $(get_camera) -eq 0 ]; then
      DEFAULT=
      CURRENT=1
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the camera interface to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq $CURRENT ]; then
    ASK_TO_REBOOT=1
  fi
  if [ $RET -eq 0 ]; then
    set_config_var start_x 1 $CONFIG
    CUR_GPU_MEM=$(get_config_var gpu_mem $CONFIG)
    if [ -z "$CUR_GPU_MEM" ] || [ "$CUR_GPU_MEM" -lt 128 ]; then
      set_config_var gpu_mem 128 $CONFIG
    fi
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    set_config_var start_x 0 $CONFIG
    sed $CONFIG -i -e "s/^start_file/#start_file/"
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The camera interface is $STATUS" 20 60 1
  fi
}

get_onewire() {
  if grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then
    echo 0
  else
    echo 1
  fi
}

do_onewire() {
  DEFAULT=--defaultno
  CURRENT=0
  if [ $(get_onewire) -eq 0 ]; then
    DEFAULT=
    CURRENT=1
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --yesno "Would you like the one-wire interface to be enabled?" $DEFAULT 20 60 2
    RET=$?
  else
    RET=$1
  fi
  if [ $RET -eq $CURRENT ]; then
    ASK_TO_REBOOT=1
  fi
  if [ $RET -eq 0 ]; then
    sed $CONFIG -i -e "s/^#dtoverlay=w1-gpio/dtoverlay=w1-gpio/"
    if ! grep -q -E "^dtoverlay=w1-gpio" $CONFIG; then
      printf "dtoverlay=w1-gpio\n" >> $CONFIG
    fi
    STATUS=enabled
  elif [ $RET -eq 1 ]; then
    sed $CONFIG -i -e "s/^dtoverlay=w1-gpio/#dtoverlay=w1-gpio/"
    STATUS=disabled
  else
    return $RET
  fi
  if [ "$INTERACTIVE" = True ]; then
    whiptail --msgbox "The one-wire interface is $STATUS" 20 60 1
  fi
}

do_gldriver() {
  if is_pione || is_pizero; then
    whiptail --msgbox "GL driver cannot be used on Pi 1 or Pi 0" 20 60 2
    return 1
  fi
  if [ ! -e /boot/overlays/vc4-kms-v3d.dtbo ]; then
    whiptail --msgbox "Driver and kernel not present on your system. Please update" 20 60 2
    return 1
  fi
  if [ $(dpkg -l libgl1-mesa-dri | tail -n 1 | cut -d ' ' -f 1) != "ii" ]; then
    whiptail --msgbox "libgl1-mesa-dri not found - please install" 20 60 2
    return 1
  fi
  GLOPT=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "GL Driver" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT \
    "G1 GL (Full KMS)" "OpenGL desktop driver with full KMS" \
    "G2 GL (Fake KMS)" "OpenGL desktop driver with fake KMS" \
    "G3 Legacy" "Original non-GL desktop driver" \
    3>&1 1>&2 2>&3)
  if [ $? -eq 0 ]; then
    case "$GLOPT" in
      G1*)
        if ! grep -q -E "^dtoverlay=vc4-kms-v3d" $CONFIG; then
          ASK_TO_REBOOT=1
        fi
		sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/"
		sed $CONFIG -i -e "s/^#dtoverlay=vc4-kms-v3d/dtoverlay=vc4-kms-v3d/"
		if ! grep -q -E "^dtoverlay=vc4-kms-v3d" $CONFIG; then
			printf "dtoverlay=vc4-kms-v3d\n" >> $CONFIG
		fi
        STATUS="The full KMS GL driver is enabled."
        ;;
      G2*)
        if ! grep -q -E "^dtoverlay=vc4-fkms-v3d" $CONFIG; then
          ASK_TO_REBOOT=1
        fi
		sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/"
		sed $CONFIG -i -e "s/^#dtoverlay=vc4-fkms-v3d/dtoverlay=vc4-fkms-v3d/"
		if ! grep -q -E "^dtoverlay=vc4-fkms-v3d" $CONFIG; then
			printf "dtoverlay=vc4-fkms-v3d\n" >> $CONFIG
		fi
        STATUS="The fake KMS GL driver is enabled."
        ;;
      G3*)
        if grep -q -E "^dtoverlay=vc4-f?kms-v3d" $CONFIG; then
          ASK_TO_REBOOT=1
        fi
        sed $CONFIG -i -e "s/^dtoverlay=vc4-kms-v3d/#dtoverlay=vc4-kms-v3d/"
        sed $CONFIG -i -e "s/^dtoverlay=vc4-fkms-v3d/#dtoverlay=vc4-fkms-v3d/"
        STATUS="The GL driver is disabled."
        ;;
      *)
        whiptail --msgbox "Programmer error, unrecognised boot option" 20 60 2
        return 1
        ;;
    esac
  else
    return 0
  fi
  if echo "$GLOPT" | grep -q -E "1|2" ; then
    if grep -q "splash" $CMDLINE ; then
	    sed -i $CMDLINE -e "s/ quiet//"
	    sed -i $CMDLINE -e "s/ splash//"
	    sed -i $CMDLINE -e "s/ plymouth.ignore-serial-consoles//"
	fi
    if [ -e /usr/share/X11/xorg.conf.d/99-fbturbo.conf ] ; then
      mv /usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/X11/xorg.conf.d/99-fbturbo.~
    fi
    sed $CONFIG -i -e "s/^gpu_mem/#gpu_mem/"
    if [ ! -e /etc/xdg/autostart/xcompmgr.desktop ] ; then
      cat << EOF > /etc/xdg/autostart/xcompmgr.desktop
[Desktop Entry]
Type=Application
Name=compton
Comment=Start Compton compositor
NoDisplay=true
Exec=compton --backend glx --unredir-if-possible --glx-swap-method buffer-age --glx-no-stencil --paint-on-overlay --vsync opengl
EOF
    fi
    if [ ! -e /usr/bin/compton ]; then
      sudo apt-get -y install compton
    fi
  else
    if [ -e /usr/share/X11/xorg.conf.d/99-fbturbo.~ ] ; then
      mv /usr/share/X11/xorg.conf.d/99-fbturbo.~ /usr/share/X11/xorg.conf.d/99-fbturbo.conf
    fi
    if [ -e /etc/xdg/autostart/xcompmgr.desktop ] ; then
      rm /etc/xdg/autostart/xcompmgr.desktop
    fi
  fi
  whiptail --msgbox "$STATUS" 20 60 1
 }

do_update() {
  apt-get update &&
  apt-get install raspi-config &&
  printf "Sleeping 5 seconds before reloading raspi-config\n" &&
  sleep 5 &&
  exec raspi-config
}

do_audio() {
  if [ "$INTERACTIVE" = True ]; then
    AUDIO_OUT=$(whiptail --menu "Choose the audio output" 20 60 10 \
      "0" "Auto" \
      "1" "Force 3.5mm ('headphone') jack" \
      "2" "Force HDMI" \
      3>&1 1>&2 2>&3)
  else
    AUDIO_OUT=$1
  fi
  if [ $? -eq 0 ]; then
    amixer cset numid=3 "$AUDIO_OUT"
  fi
}

do_resolution() {
  if [ "$INTERACTIVE" = True ]; then
	CMODE=$(get_config_var hdmi_mode $CONFIG)
	CGROUP=$(get_config_var hdmi_group $CONFIG)
	if [ $CMODE -eq 0 ] ; then
	  CSET="Default"
	elif [ $CGROUP -eq 2 ] ; then
	  CSET="DMT Mode "$CMODE
	else
	  CSET="CEA Mode "$CMODE
	fi
    oIFS="$IFS"
    IFS="/"
    if tvservice -d /dev/null | grep -q Nothing ; then
      value="Default/720x480/DMT Mode 4/640x480 60Hz 4:3/DMT Mode 9/800x600 60Hz 4:3/DMT Mode 16/1024x768 60Hz 4:3/DMT Mode 85/1280x720 60Hz 16:9/DMT Mode 35/1280x1024 60Hz 5:4/DMT Mode 51/1600x1200 60Hz 4:3/DMT Mode 82/1920x1080 60Hz 16:9/"
	else
      value="Default/Monitor preferred resolution/"
      value=$value$(tvservice -m CEA | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/CEA Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/')
      value=$value$(tvservice -m DMT | grep progressive | cut -b 12- | sed 's/mode \([0-9]\+\): \([0-9]\+\)x\([0-9]\+\) @ \([0-9]\+\)Hz \([0-9]\+\):\([0-9]\+\), clock:[0-9]\+MHz progressive/DMT Mode \1\/\2x\3 \4Hz \5:\6/' | tr '\n' '/')
	fi
    RES=$(whiptail --default-item $CSET --menu "Choose screen resolution" 20 60 10 ${value} 3>&1 1>&2 2>&3)
    STATUS=$?
    IFS=$oIFS
    if [ $STATUS -eq 0 ] ; then
      GRS=$(echo "$RES" | cut -d ' ' -f 1)
      MODE=$(echo "$RES" | cut -d ' ' -f 3)
      if [ $GRS = "Default" ] ; then
		MODE=0
      elif [ $GRS = "DMT" ] ; then
	    GROUP=2
	  else
	    GROUP=1
	  fi
	fi
  else
    GROUP=$1
    MODE=$2
    STATUS=0
  fi
  if [ $STATUS -eq 0 ]; then
	if [ $MODE -eq 0 ]; then
	  clear_config_var hdmi_force_hotplug $CONFIG
	  clear_config_var hdmi_group $CONFIG
	  clear_config_var hdmi_mode $CONFIG
	else
	  set_config_var hdmi_force_hotplug 1 $CONFIG
	  set_config_var hdmi_group $GROUP $CONFIG
	  set_config_var hdmi_mode $MODE $CONFIG
	fi
    if [ "$INTERACTIVE" = True ]; then
	  if [ $MODE -eq 0 ] ; then
        whiptail --msgbox "The resolution is set to default" 20 60 1
	  else
        whiptail --msgbox "The resolution is set to $GRS mode $MODE" 20 60 1
      fi
    fi
	if [ $MODE -eq 0 ] ; then
	  TSET="Default"
	elif [ $GROUP -eq 2 ] ; then
	  TSET="DMT Mode "$MODE
	else
	  TSET="CEA Mode "$MODE
	fi
	if [ "$TSET" != "$CSET" ] ; then
	  ASK_TO_REBOOT=1
	fi
  fi
}

do_finish() {
  disable_raspi_config_at_boot
  if [ $ASK_TO_REBOOT -eq 1 ]; then
    whiptail --yesno "Would you like to reboot now?" 20 60 2
    if [ $? -eq 0 ]; then # yes
      sync
      reboot
    fi
  fi
  exit 0
}

# $1 = filename, $2 = key name
get_json_string_val() {
  sed -n -e "s/^[[:space:]]*\"$2\"[[:space:]]*:[[:space:]]*\"\(.*\)\"[[:space:]]*,$/\1/p" $1
}

# TODO: This is probably broken
do_apply_os_config() {
  [ -e /boot/os_config.json ] || return 0
  NOOBSFLAVOUR=$(get_json_string_val /boot/os_config.json flavour)
  NOOBSLANGUAGE=$(get_json_string_val /boot/os_config.json language)
  NOOBSKEYBOARD=$(get_json_string_val /boot/os_config.json keyboard)

  if [ -n "$NOOBSFLAVOUR" ]; then
    printf "Setting flavour to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSFLAVOUR"

    printf "Unrecognised flavour. Ignoring\n"
  fi

  # TODO: currently ignores en_gb settings as we assume we are running in a 
  # first boot context, where UK English settings are default
  case "$NOOBSLANGUAGE" in
    "en")
      if [ "$NOOBSKEYBOARD" = "gb" ]; then
        DEBLANGUAGE="" # UK english is the default, so ignore
      else
        DEBLANGUAGE="en_US.UTF-8"
      fi
      ;;
    "de")
      DEBLANGUAGE="de_DE.UTF-8"
      ;;
    "fi")
      DEBLANGUAGE="fi_FI.UTF-8"
      ;;
    "fr")
      DEBLANGUAGE="fr_FR.UTF-8"
      ;;
    "hu")
      DEBLANGUAGE="hu_HU.UTF-8"
      ;;
    "ja")
      DEBLANGUAGE="ja_JP.UTF-8"
      ;;
    "nl")
      DEBLANGUAGE="nl_NL.UTF-8"
      ;;
    "pt")
      DEBLANGUAGE="pt_PT.UTF-8"
      ;;
    "ru")
      DEBLANGUAGE="ru_RU.UTF-8"
      ;;
    "zh_CN")
      DEBLANGUAGE="zh_CN.UTF-8"
      ;;
    *)
      printf "Language '%s' not handled currently. Run sudo raspi-config to set up" "$NOOBSLANGUAGE"
      ;;
  esac

  if [ -n "$DEBLANGUAGE" ]; then
    printf "Setting language to %s based on os_config.json from NOOBS. May take a while\n" "$DEBLANGUAGE"
    cat << EOF | debconf-set-selections
locales   locales/locales_to_be_generated multiselect     $DEBLANGUAGE UTF-8
EOF
    rm /etc/locale.gen
    dpkg-reconfigure -f noninteractive locales
    update-locale LANG="$DEBLANGUAGE"
    cat << EOF | debconf-set-selections
locales   locales/default_environment_locale select       $DEBLANGUAGE
EOF
  fi

  if [ -n "$NOOBSKEYBOARD" -a "$NOOBSKEYBOARD" != "gb" ]; then
    printf "Setting keyboard layout to %s based on os_config.json from NOOBS. May take a while\n" "$NOOBSKEYBOARD"
    sed -i /etc/default/keyboard -e "s/^XKBLAYOUT.*/XKBLAYOUT=\"$NOOBSKEYBOARD\"/"
    dpkg-reconfigure -f noninteractive keyboard-configuration
    invoke-rc.d keyboard-setup start
  fi
  return 0
}

nonint() {
    $*
}

#
# Command line options for non-interactive use
#
for i in $*
do
  case $i in
  --memory-split)
    OPT_MEMORY_SPLIT=GET
    printf "Not currently supported\n"
    exit 1
    ;;
  --memory-split=*)
    OPT_MEMORY_SPLIT=`echo $i | sed 's/[-a-zA-Z0-9]*=//'`
    printf "Not currently supported\n"
    exit 1
    ;;
  --expand-rootfs)
    INTERACTIVE=False
    do_expand_rootfs
    printf "Please reboot\n"
    exit 0
    ;;
  --apply-os-config)
    INTERACTIVE=False
    do_apply_os_config
    exit $?
    ;;
  nonint)
    INTERACTIVE=False
    $@
    ;;
  *)
    # unknown option
    ;;
  esac
done

#if [ "GET" = "${OPT_MEMORY_SPLIT:-}" ]; then
#  set -u # Fail on unset variables
#  get_current_memory_split
#  echo $CURRENT_MEMSPLIT
#  exit 0
#fi

# Everything else needs to be run as root
if [ $(id -u) -ne 0 ]; then
  printf "Script must be run as root. Try 'sudo raspi-config'\n"
  exit 1
fi

if [ -n "${OPT_MEMORY_SPLIT:-}" ]; then
  set -e # Fail when a command errors
  set_memory_split "${OPT_MEMORY_SPLIT}"
  exit 0
fi

do_internationalisation_menu() {
  if is_ssh ; then
  FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
    "I1 Change Locale" "Set up language and regional settings to match your location" \
    "I2 Change Timezone" "Set up timezone to match your location" \
    "I4 Change Wi-fi Country" "Set the legal channels used in your country" \
    3>&1 1>&2 2>&3)
  else
  FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Localisation Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
    "I1 Change Locale" "Set up language and regional settings to match your location" \
    "I2 Change Timezone" "Set up timezone to match your location" \
    "I3 Change Keyboard Layout" "Set the keyboard layout to match your keyboard" \
    "I4 Change Wi-fi Country" "Set the legal channels used in your country" \
    3>&1 1>&2 2>&3)
  fi
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      I1\ *) do_change_locale ;;
      I2\ *) do_change_timezone ;;
      I3\ *) do_configure_keyboard ;;
      I4\ *) do_wifi_country ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

do_interface_menu() {
  if ! is_pi ; then
	do_ssh
  else
    FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Interfacing Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "P1 Camera" "Enable/Disable connection to the Raspberry Pi Camera" \
      "P2 SSH" "Enable/Disable remote command line access to your Pi using SSH" \
      "P3 VNC" "Enable/Disable graphical remote access to your Pi using RealVNC" \
      "P4 SPI" "Enable/Disable automatic loading of SPI kernel module" \
      "P5 I2C" "Enable/Disable automatic loading of I2C kernel module" \
      "P6 Serial" "Enable/Disable shell and kernel messages on the serial connection" \
      "P7 1-Wire" "Enable/Disable one-wire interface" \
      "P8 Remote GPIO" "Enable/Disable remote access to GPIO pins" \
      3>&1 1>&2 2>&3)
    RET=$?
    if [ $RET -eq 1 ]; then
      return 0
    elif [ $RET -eq 0 ]; then
      case "$FUN" in
        P1\ *) do_camera ;;
        P2\ *) do_ssh ;;
        P3\ *) do_vnc ;;
        P4\ *) do_spi ;;
        P5\ *) do_i2c ;;
        P6\ *) do_serial ;;
        P7\ *) do_onewire ;;
        P8\ *) do_rgpio ;;
        *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
      esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
    fi
  fi
}

do_advanced_menu() {
  FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Advanced Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
    "A1 Expand Filesystem" "Ensures that all of the SD card storage is available to the OS" \
    "A2 Overscan" "You may need to configure overscan if black bars are present on display" \
    "A3 Memory Split" "Change the amount of memory made available to the GPU" \
    "A4 Audio" "Force audio out through HDMI or 3.5mm jack" \
    "A5 Resolution" "Set a specific screen resolution" \
    "A6 GL Driver" "Enable/Disable experimental desktop GL driver" \
    3>&1 1>&2 2>&3)
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      A1\ *) do_expand_rootfs ;;
      A2\ *) do_overscan ;;
      A3\ *) do_memory_split ;;
      A4\ *) do_audio ;;
      A5\ *) do_resolution ;;
      A6\ *) do_gldriver ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

do_boot_menu() {
  if is_live ; then
    FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "B1 Desktop / CLI" "Choose whether to boot into a desktop environment or the command line" \
      "B2 Wait for Network at Boot" "Choose whether to wait for network connection during boot" \
      3>&1 1>&2 2>&3)
  else
    FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Boot Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Back --ok-button Select \
      "B1 Desktop / CLI" "Choose whether to boot into a desktop environment or the command line" \
      "B2 Wait for Network at Boot" "Choose whether to wait for network connection during boot" \
      "B3 Splash Screen" "Choose graphical splash screen or text boot" \
      3>&1 1>&2 2>&3)
  fi
  RET=$?
  if [ $RET -eq 1 ]; then
    return 0
  elif [ $RET -eq 0 ]; then
    case "$FUN" in
      B1\ *) do_boot_behaviour ;;
      B2\ *) do_boot_wait ;;
      B3\ *) do_boot_splash ;;
      *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
    esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
  fi
}

#
# Interactive use loop
#
if [ "$INTERACTIVE" = True ]; then
  if is_pi && ! mountpoint -q /boot; then
    whiptail --msgbox "The boot partition is not mounted - cannot configure. Note that raspi-config is intended for use on Raspbian only and cannot be guaranteed to work on other operating systems." 20 60 1
    exit 1
  fi
  [ -e $CONFIG ] || touch $CONFIG
  get_init_sys
  calc_wt_size
  while true; do
	if is_pi ; then
      FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \
        "1 Change User Password" "Change password for the default user (pi)" \
        "2 Hostname" "Set the visible name for this Pi on a network" \
        "3 Boot Options" "Configure options for start-up" \
        "4 Localisation Options" "Set up language and regional settings to match your location" \
        "5 Interfacing Options" "Configure connections to peripherals" \
        "6 Overclock" "Configure overclocking for your Pi" \
        "7 Advanced Options" "Configure advanced settings" \
        "8 Update" "Update this tool to the latest version" \
        "9 About raspi-config" "Information about this configuration tool" \
        3>&1 1>&2 2>&3)
    else
      FUN=$(whiptail --title "Raspberry Pi Software Configuration Tool (raspi-config)" --menu "Setup Options" $WT_HEIGHT $WT_WIDTH $WT_MENU_HEIGHT --cancel-button Finish --ok-button Select \
        "1 Change User Password" "Change password for the default user (pi)" \
        "2 Hostname" "Set the visible name for this PC on a network" \
        "3 Boot Options" "Configure options for start-up" \
        "4 Localisation Options" "Set up language and regional settings to match your location" \
        "5 SSH" "Enable/Disable remote command line access to your PC using SSH" \
        "8 Update" "Update this tool to the latest version" \
        "9 About raspi-config" "Information about this configuration tool" \
        3>&1 1>&2 2>&3)
    fi
    RET=$?
    if [ $RET -eq 1 ]; then
      do_finish
    elif [ $RET -eq 0 ]; then
      case "$FUN" in
        1\ *) do_change_pass ;;
        2\ *) do_hostname ;;
        3\ *) do_boot_menu ;;
        4\ *) do_internationalisation_menu ;;
        5\ *) do_interface_menu ;;
        6\ *) do_overclock ;;
        7\ *) do_advanced_menu ;;
        8\ *) do_update ;;
        9\ *) do_about ;;
        *) whiptail --msgbox "Programmer error: unrecognized option" 20 60 1 ;;
      esac || whiptail --msgbox "There was an error running option $FUN" 20 60 1
    else
      exit 1
    fi
  done
fi